The key and bottleneck of research on the tip-jet rotor compound helicopter lies in the power system. Computational Fluid Dynamics (CFD) was used to numerically simulate the gas generator and rotor inner passage of th...The key and bottleneck of research on the tip-jet rotor compound helicopter lies in the power system. Computational Fluid Dynamics (CFD) was used to numerically simulate the gas generator and rotor inner passage of the tip-jet rotor composite power system, studying the effects of intake mode, inner cavity structure, propellant components, and injection amount on the characteristics of the composite power system. The results show that when a single high-temperature exhaust gas enters, the gas generator outlet fluid is uneven and asymmetric;when two-way high-temperature exhaust gas enters, the outlet temperature of the gas generator with a tilted inlet is more uniform than that with a vertical inlet;adding an inner cavity improves the temperature and velocity distribution of the gas generator's internal flow field;increasing the energy of the propellant is beneficial for improving the available moment.展开更多
In this paper, the characteristics of an atmospheric pressure helium plasma jet generated by a dual-power electrode （DPE） configuration are investigated by using a two-dimensional fluid model. The effect of a needle...In this paper, the characteristics of an atmospheric pressure helium plasma jet generated by a dual-power electrode （DPE） configuration are investigated by using a two-dimensional fluid model. The effect of a needle electrode on the discharge is studied by comparing the results of the DPE configuration with those of the single ring electrode configuration. It is found that the existence of the needle leads to the generation of a helium plasma jet with a higher propagation velocity, higher species density, and larger discharge width. Furthermore, the influences of the needle radius and needle-to-ring discharge gap on the generation of a plasma jet are also studied. The simulation results indicate that the needle electrode has an evident influence on the plasma jet characteristics.展开更多
This paper used optical emission spectroscopy （OES） to study the gas phase in high power DC arc plasma jet chemical vapour deposition （CVD） during diamond films growth processes. The results show that all the depo...This paper used optical emission spectroscopy （OES） to study the gas phase in high power DC arc plasma jet chemical vapour deposition （CVD） during diamond films growth processes. The results show that all the deposition parameters （methane concentration, substrate temperature, gas flow rate and ratio of H2/Ar） could strongly influence the gas phase. C2 is found to be the most sensitive radical to deposition parameters among the radicals in gas phase. Spatially resolved OES implies that a relative high concentration of atomic H exists near the substrate surface, which is beneficial for diamond film growth. The relatively high concentrations of C2 and CH are correlated with high deposition rate of diamond. In our high deposition rate system, C2 is presumed to be the main growth radical, and CH is also believed to contribute the diamond deposition.展开更多
Optical emission spectroscopy （OES） was used to study the gas phase composition near the substrate surface during diamond deposition by high-power DC arc plasma jet chemical vapor deposition （CVD）. C2 radical was ...Optical emission spectroscopy （OES） was used to study the gas phase composition near the substrate surface during diamond deposition by high-power DC arc plasma jet chemical vapor deposition （CVD）. C2 radical was determined as the main carbon radical in this plasma atmosphere. The deposition parameters, such as substrate temperature, anode-substrate distance, methane concentration, and gas flow rate, were inspected to find out the influence on the gas phase. A strong dependence of the concentrations and distribution of radicals on substrate temperature was confirmed by the design of experiments （DOE）. An explanation for this dependence could be that radicals near the substrate surface may have additional ionization or dissociation and also have recombination, or are consumed on the substrate surface where chemical reactions occur.展开更多
Power Cartridges are pyrotechnic devices where hot combustion gases utilized to do mechanical work for disruption of suspected Improvised Explosive Devices(IEDs). It plays a vital role either in destroying the suspici...Power Cartridges are pyrotechnic devices where hot combustion gases utilized to do mechanical work for disruption of suspected Improvised Explosive Devices(IEDs). It plays a vital role either in destroying the suspicious object or making them non-functional by generating the gas pressure on burning of propellant against the water column inside the barrel, Present work is focused on characterisation,numerical solution such as deformation; strain; stress using FEM(Finite Element Method), design qualification, performance and evaluation of power cartridge for disruptor application. Experimental trials for pressure-time(P-t) measurement in closed vessel(CV), various electrical parameters like all fire current(AFC), no fire current(NFC) and ignition delay have been measured. Further, mechanical properties for brass material have been determined. An attempt has been made to characterise the power cartridge by FEM and carrying out the experiments for water-jet application.展开更多
In this work, a typical pin-to-pin plasma synthetic jet in static air is excited by a pulsed DC power supply. The influences of the pulse rising time, the amplitude and the repetition frequency of the pulse voltage on...In this work, a typical pin-to-pin plasma synthetic jet in static air is excited by a pulsed DC power supply. The influences of the pulse rising time, the amplitude and the repetition frequency of the pulse voltage on the jet flow have been investigated. First, using a high-speed Schlieren imaging technique, the induced shock waves and the fast jet flow generated by the plasma synthetic jet are characterized. With a deposited energy of 44 m J per pulse, the velocity of the shock wave and the maximum velocity of the jet flow reach 320 m s-1 and 100 m s-1,respectively. Second, when the applied voltage increases from 12.8 kV to 16 kV, the maximum jet velocity increases from 66 m s-1 to 93 m s-1. On the other hand, as the pulse rising time varies from 50 ns to 500 ns, or the pulse repetition frequency increases from 5 Hz to 40 Hz, the jet velocity induced by the plasma synthetic jet is weakly dependent. In addition, a comparative study of the plasma synthetic jets using three commercial pulsed power supplies(XJ-15, NPG-18, and PG-30) is implemented. It reveals that the maximum jet velocity of 120 m s-1 is obtained in the case of PG-30, with the longest pulse rising time and the lowest breakdown voltage, while the maximum velocity of 33 m s-1 is detected in the case of NPG-18, even though it has the shortest pulse rising time and the highest breakdown voltage.展开更多
文摘The key and bottleneck of research on the tip-jet rotor compound helicopter lies in the power system. Computational Fluid Dynamics (CFD) was used to numerically simulate the gas generator and rotor inner passage of the tip-jet rotor composite power system, studying the effects of intake mode, inner cavity structure, propellant components, and injection amount on the characteristics of the composite power system. The results show that when a single high-temperature exhaust gas enters, the gas generator outlet fluid is uneven and asymmetric;when two-way high-temperature exhaust gas enters, the outlet temperature of the gas generator with a tilted inlet is more uniform than that with a vertical inlet;adding an inner cavity improves the temperature and velocity distribution of the gas generator's internal flow field;increasing the energy of the propellant is beneficial for improving the available moment.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10775026,11275042,11305026,and 11405042)
文摘In this paper, the characteristics of an atmospheric pressure helium plasma jet generated by a dual-power electrode （DPE） configuration are investigated by using a two-dimensional fluid model. The effect of a needle electrode on the discharge is studied by comparing the results of the DPE configuration with those of the single ring electrode configuration. It is found that the existence of the needle leads to the generation of a helium plasma jet with a higher propagation velocity, higher species density, and larger discharge width. Furthermore, the influences of the needle radius and needle-to-ring discharge gap on the generation of a plasma jet are also studied. The simulation results indicate that the needle electrode has an evident influence on the plasma jet characteristics.
文摘This paper used optical emission spectroscopy （OES） to study the gas phase in high power DC arc plasma jet chemical vapour deposition （CVD） during diamond films growth processes. The results show that all the deposition parameters （methane concentration, substrate temperature, gas flow rate and ratio of H2/Ar） could strongly influence the gas phase. C2 is found to be the most sensitive radical to deposition parameters among the radicals in gas phase. Spatially resolved OES implies that a relative high concentration of atomic H exists near the substrate surface, which is beneficial for diamond film growth. The relatively high concentrations of C2 and CH are correlated with high deposition rate of diamond. In our high deposition rate system, C2 is presumed to be the main growth radical, and CH is also believed to contribute the diamond deposition.
基金the National High-Tech Research and Development Program of China (No.2002AA305508)the National Natural Science Foundation of China (No.50472095)+1 种基金the Scientific Research Foundation for the Returned Overseas Chinese Scholars (No.2003-14)Beijing Novel Project (No. 2003A13).]
文摘Optical emission spectroscopy （OES） was used to study the gas phase composition near the substrate surface during diamond deposition by high-power DC arc plasma jet chemical vapor deposition （CVD）. C2 radical was determined as the main carbon radical in this plasma atmosphere. The deposition parameters, such as substrate temperature, anode-substrate distance, methane concentration, and gas flow rate, were inspected to find out the influence on the gas phase. A strong dependence of the concentrations and distribution of radicals on substrate temperature was confirmed by the design of experiments （DOE）. An explanation for this dependence could be that radicals near the substrate surface may have additional ionization or dissociation and also have recombination, or are consumed on the substrate surface where chemical reactions occur.
文摘Power Cartridges are pyrotechnic devices where hot combustion gases utilized to do mechanical work for disruption of suspected Improvised Explosive Devices(IEDs). It plays a vital role either in destroying the suspicious object or making them non-functional by generating the gas pressure on burning of propellant against the water column inside the barrel, Present work is focused on characterisation,numerical solution such as deformation; strain; stress using FEM(Finite Element Method), design qualification, performance and evaluation of power cartridge for disruptor application. Experimental trials for pressure-time(P-t) measurement in closed vessel(CV), various electrical parameters like all fire current(AFC), no fire current(NFC) and ignition delay have been measured. Further, mechanical properties for brass material have been determined. An attempt has been made to characterise the power cartridge by FEM and carrying out the experiments for water-jet application.
基金partially supported by National Natural Science Foundation of China (No. 51607090)the Natural Science Foundation of Jiangsu Province (No. BK20160796)+1 种基金Fundamental Research Funds for the Central Universities (No. XCA17003-03)the Delta Research and EducationalFoundation (No. DREG2017008)
文摘In this work, a typical pin-to-pin plasma synthetic jet in static air is excited by a pulsed DC power supply. The influences of the pulse rising time, the amplitude and the repetition frequency of the pulse voltage on the jet flow have been investigated. First, using a high-speed Schlieren imaging technique, the induced shock waves and the fast jet flow generated by the plasma synthetic jet are characterized. With a deposited energy of 44 m J per pulse, the velocity of the shock wave and the maximum velocity of the jet flow reach 320 m s-1 and 100 m s-1,respectively. Second, when the applied voltage increases from 12.8 kV to 16 kV, the maximum jet velocity increases from 66 m s-1 to 93 m s-1. On the other hand, as the pulse rising time varies from 50 ns to 500 ns, or the pulse repetition frequency increases from 5 Hz to 40 Hz, the jet velocity induced by the plasma synthetic jet is weakly dependent. In addition, a comparative study of the plasma synthetic jets using three commercial pulsed power supplies(XJ-15, NPG-18, and PG-30) is implemented. It reveals that the maximum jet velocity of 120 m s-1 is obtained in the case of PG-30, with the longest pulse rising time and the lowest breakdown voltage, while the maximum velocity of 33 m s-1 is detected in the case of NPG-18, even though it has the shortest pulse rising time and the highest breakdown voltage.
