Cooperative Sampling Path Planning of Underwater Glider Fleet with Simultaneous Launch and Recovery

As low-cost and highly autonomous ocean observation platforms,underwater gliders encounter risks during their launch and recovery,especially when coordinating multi-glider deployments.This work focuses on cooperative path planning of an underwater glider fleet with simultaneous launch and recovery to enhance the autonomy of sampling and reduce deployment risks.Specifically,the gliders collaborate to achieve sampling considering the specified routines of interest.The overall paths to be planned are divided into four rectangular parts with the same starting point,and each glider is assigned a local sampling route.A clipped-oriented line-of-sight algorithm is proposed to ensure the coverage of the desired edges.The pitch angle of the glider is selected as the optimizing parameter to coordinate the overall progress considering the susceptibility of gliders to currents and the randomness of paths produced by complex navigational strategies.Therefore,a multi-actuation deep-Q network algorithm is proposed to ensure simultaneous launch and recovery.Simulation results demonstrate the acceptable effectiveness of the proposed method.

Dynamic Modeling and Motion Simulation for A Winged Hybrid-Driven Underwater Glider

PETREL, a winged hybrid-driven underwater glider is a novel and practical marine survey platform which combines the features of legacy underwater glider and conventional AUV （autonomous underwater vehicle）. It can be treated as a multi-rigid-body system with a floating base and a particular hydrodynamic profile. In this paper, theorems on linear and angular momentum are used to establish the dynamic equations of motion of each rigid body and the effect of translational and rotational motion of internal masses on the attitude control are taken into consideration. In addition, due to the unique external shape with fixed wings and deflectable rudders and the dual-drive operation in thrust and glide modes, the approaches of building dynamic model of conventional AUV and hydrodynamic model of submarine are introduced, and the tailored dynamic equations of the hybrid glider are formulated. Moreover, the behaviors of motion in glide and thrust operation are analyzed based on the simulation and the feasibility of the dynamic model is validated by data from lake field trials.

Development and Experiments of the Sea-Wing Underwater Glider

Underwater gliders, which glide through water columns by use of a pair of wings, are efficient long-distance, long-duration marine environment observatory platforms. The Sea-Wing underwater glider, developed by the Shenyang Institute of Automation, CAS, is designed for the application of deep-sea environment variables observation. The system components, the mechanical design, and the control system design of the Sea-Wing underwater glider are described in this paper. The pitch and roll adjusting models are derived based on the mechanical design, and the adjusting capabilities for the pitch and roll are analyzed according to the models. Field experiments have been carried out for validating the gliding motion and the ability of measuring ocean environment variables. Experimental results of the motion performances of the glider are presented.

Kuroshio intrusion into the South China Sea with an anticyclonic eddy: evidence from underwater glider observation

In this study, high-resolution temperature and salinity data obtained from three Sea-Wing underwater gliders were used together with satellite altimeter data to track the vertical thermohaline structure of an anticyclonic eddy that originated from the loop current of the Kuroshio southwest of Taiwan, China. One of the gliders crossed the entire eddy and it observed a remarkable warm anomaly of as much as 3.9℃ extending to 500 dbar from the base of the mixed layer. Conversely, a positive salinity anomaly was found to be above 200 dbar only in the anticyclonic eddy, with a maximum value of >0.5 in the mixed layer. Below the mixed layer, water of higher salinity (>34.7) was found, which could have been preserved through constrained vertical mixing within the anticyclonic eddy. The salinity in the upper layer of the anticyclonic eddy was much similar to that of the northwestern Pacific Ocean than the northern South China Sea, reflecting Kuroshio intrusion with anticyclonic eddy shedding from the loop current.

Parametric Geometric Model and Hydrodynamic Shape Optimization of A Flying-Wing Structure Underwater Glider

Combining high precision numerical analysis methods with optimization algorithms to make a systematic exploration of a design space has become an important topic in the modern design methods. During the design process of an underwater glider＇s flying-wing structure, a surrogate model is introduced to decrease the computation time for a high precision analysis. By these means, the contradiction between precision and efficiency is solved effectively. Based on the parametric geometry modeling, mesh generation and computational fluid dynamics analysis, a surrogate model is constructed by adopting the design of experiment （DOE） theory to solve the multi-objects design optimization problem of the underwater glider. The procedure of a surrogate model construction is presented, and the Gaussian kernel function is specifically discussed. The Particle Swarm Optimization （PSO） algorithm is applied to hydrodynamic design optimization. The hydrodynamic performance of the optimized flying-wing structure underwater glider increases by 9.1%.

Dynamic Modeling and Three-Dimensional Motion Analysis of Underwater Gliders

For consideration of both the eccentric rotatable rigid body and the translational rigid body, the dynamic model of the underwater glider is derived. Dynamical behaviors are also studied based on the model and can be used as the guidance to underwater gliders design. Gibbs function of the underwater glider system is derived first, and then the nonlinear dynamic model is obtained by use of Appell equations. The relationships between dynamic behaviors and design parameters are studied by solving the dynamic model. The spiral motion, swerving motion in three dimensions and the saw-tooth motion of the underwater glider in vertical plane are studied. Lake trials are carried out to validate the dynamic model.

Stability Analysis of Hybrid-Driven Underwater Glider

Hybrid-driven underwater glider is a new type of tmmanned underwater vehicle, which combines the advantages of autonomous underwater vehicles and traditional underwater gliders. The autonomous underwater vehicles have good maneuverability and can travel with a high speed, while the traditional underwater gliders are highlighted by low power consumption, long voyage, long endurance and good stealth characteristics. The hybrid-driven underwater gliders can realize variable motion profiles by their own buoyancy-driven and propeller propulsion systems. Stability of the mechanical system determines the performance of the system. In this paper, the Petrel-II hybrid-driven underwater glider developed by Tianjin University is selected as the research object and the stability of hybrid-driven underwater glider unitedly controlled by buoyancy and propeller has been targeted and evidenced. The dimensionless equations of the hybrid-driven underwater glider are obtained when the propeller is working. Then, the steady speed and steady glide path angle under steady-state motion have also been achieved. The steady-state operating conditions can be calculated when the hybrid-driven underwater glider reaches the desired steady-state motion. And the steady- state operating conditions are relatively conservative at the lower bound of the velocity range compared with the range of the velocity derived from the method of the composite Lyapunov function. By calculating the hydrodynamic coefficients of the Petrel-II hybrid-driven underwater glider, the simulation analysis has been conducted. In addition, the results of the field trials conducted in the South China Sea and the Danjiangkou Reservoir of China have been presented to illustrate the validity of the analysis and simulations.and to show the feasibility of the method of the composite Lyapunov function which verifies the stability of the Petrel-II hybrid-driven underwater glider.

Real-time quality control of data from Sea-Wing underwater glider installed with Glider Payload CTD sensor

Profiles observed by Sea-Wing underwater gliders are widely applied in scientific research. However, the quality control(QC) of these data has received little attention. The mismatch between the temperature probe and conductivity cell response times generates erroneous salinities, especially across a strong thermocline. A sensor drift may occur owing to biofouling and biocide leakage into the conductivity cell when a glider has operated for several months. It is therefore critical to design a mature real-time QC procedure and develop a toolbox for the QC of Sea-Wing glider data. On the basis of temperature and salinity profiles observed by several Sea-Wing gliders each installed with a Sea-Bird Glider Payload CTD sensor, a real-time QC method including a thermal lag correction, Argo-equivalent real-time QC tests, and a simple post-processing procedure is proposed. The method can also be adopted for Petrel gliders.

Motion Analysis and Trials of the Deep Sea Hybrid Underwater Glider Petrel-Ⅱ

A hybrid underwater glider Petrel-II has been developed and field tested. It is equipped with an active buoyancy unit and a compact propeller unit. Its working modes have been expanded to buoyancy driven gliding and propeller driven level-flight, which can make the glider work in strong currents, as well as many other complicated ocean environments. Its maximal gliding speed reaches 1 knot and the propelling speed is up to 3 knots. In this paper, a 3D dynamic model of Petrel-II is derived using linear momentum and angular momentum equations. According to the dynamic model, the spiral motion in the underwater space is simulated for the gliding mode. Similarly the cycle motion on water surface and the depth-keeping motion underwater are simulated for the level-flight mode. These simulations are important to the performance analysis and parameter optimization for the Petrel-II underwater glider. The simulation results show a good agreement with field trials.

Modeling and Motion Simulation for A Flying-Wing Underwater Glider with A Symmetrical Airfoil

The flying-wing underwater glider (UG), shaped as a blended wing body, is a new type of underwater vehicle and still requires further research. The shape layout and the configuration of the internal actuators of the flying-wing UG are different from those of "legacy gliders" which have revolving bodies, and these two factors strongly affect the dynamic performance of the vehicle. Considering these differences, we propose a new configuration of the internal actuators for the flying-wing UG and treat the flying-wing UG as a multi-body system when establishing its dynamic model. In this paper, a detailed dynamic model is presented using the Newton-Euler method for the flying-wing UG. Based on the full dynamic model, the effect of the internal actuators on the steady gliding motion of vehicle is studied theoretically, and the relationship between the state parameters of the steady gliding motion and the controlled variables is obtained by solving a set of equilibrium equations. Finally, the behaviors of two classical motion modes of the glider are analyzed based on the simulation. The simulation results demonstrate that the motion performance of the proposed flying-wing UG is satisfactory.

Modeling and Simulation of A Novel Autonomous Underwater Vehicle with Glider and Flapping-Foil Propulsion Capabilities

HAISHEN is a long-ranged and highly maneuverable AUV which has two operating modes： glider mode and flapping-foil propulsion mode. As part of the vehicle development, a three-dimensional mathematical model of the conceptual vehicle was developed on the assumption that HAISHEN has a rigid body with two independently controlled oscillating hydrofoils. A flapping-foil model was developed based on the work done by Georgiades et al. （2009）. Effect of controllable hydrofoils on the vehicle stable motion performance was studied theoretically. Finally, a dynamics simulation of the vehicle in both operating modes is created in this paper. The simulation demonstrates that： （1） in the glider mode, owing to the independent control of the pitch angle of each hydrofoil, HAISHEN travels faster and more efficiently and has a smaller turning radius than conventional fix-winged gliders; （2） in the flapping-foil propulsion mode, HAISHEN has a high maneuverability with a turning radius smaller than 15 m and a forward motion velocity about 1.8 m/s; （3） the vehicle is stable under all expected operating conditions.

A Double-Stage Surrogate-Based Shape Optimization Strategy for Blended-Wing-Body Underwater Gliders

In this paper,a Double-stage Surrogate-based Shape Optimization(DSSO)strategy for Blended-Wing-Body Underwater Gliders(BWBUGs)is proposed to reduce the computational cost.In this strategy,a double-stage surrogate model is developed to replace the high-dimensional objective in shape optimization.Specifically,several First-stage Surrogate Models(FSMs)are built for the sectional airfoils,and the second-stage surrogate model is constructed with respect to the outputs of FSMs.Besides,a Multi-start Space Reduction surrogate-based global optimization method is applied to search for the optimum.In order to validate the efficiency of the proposed method,DSSO is first compared with an ordinary One-stage Surrogate-based Optimization strategy by using the same optimization method.Then,the other three popular surrogate-based optimization methods and three heuristic algorithms are utilized to make comparisons.Results indicate that the lift-to-drag ratio of the BWBUG is improved by 9.35%with DSSO,which outperforms the comparison methods.Besides,DSSO reduces more than 50%of the time that other methods used when obtaining the same level of results.Furthermore,some considerations of the proposed strategy are further discussed and some characteristics of DSSO are identified.

A Potential Flow Based Flight Simulator for an Underwater Glider

在水下滑翔机是最近的创新类型自治在水下车辆(AUV ) 在海洋探索和观察使用了。他们调整快活潜水并且回到海洋表面。在高度的变化期间，他们使用力量由他们的翅膀开发了向前移动的水动力学。他们的班机被改变他们的重心和他们的快活的位置调整他们的修剪和脚跟角度控制。为更好的飞行控制，水动力学行为的理解和飞行力学在水下滑翔机是必要的。A 6-DOF 运动模拟器被结合为这个目的一个不稳定的潜在的流动模型。在一些特定的盒子中，数字学习证明一种不恰当的 stabilizer 尺寸能引起相反驾驶的行为。模拟器能被用来改进自动飞行控制。它能也被用于设备的水动力学设计优化。

Shape Optimization for A Conventional Underwater Glider to Decrease Average Periodic Resistance

As a type of autonomous underwater vehicle(AUV),underwater gliders(UG)are getting increasing attention in ocean exploration.To save energy and satisfy the mission requirements of a longer voyage,shape optimization for UGs has become a key technique and research focus.In this paper,a conventional UG,including its fuselage and hydrofoil,is optimized,which aims to decrease the average resistance in one motion cycle.To operate the optimization progress for the complex object,multiple free form deformation(FFD)volumes are established for geometric parameterization.High-fidelity simulation models are employed for objective function evaluation and gradients calculation.And sequential quadratic programming(SQP)method is adopted as an optimization algorithm.The optimization results show that there exists a UG with symmetrical and non-horizontal hydrofoils that has lower resistance.

Phase change analysis of an underwater glider propelled by the ocean's thermal energy

The phase change characteristic of the power source of an underwater glider propelled by the ocean's thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process,but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees,the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change,and the slope of the temperature time history curve remains the same. However,the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size,boundary conditions,and the power source's cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38mm needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.

Optimal Matching Analysis of Net Buoyancy and Pitching Angle for Underwater Gliders

Control parameter optimization is an efficient way to improve the endurance of underwater gliders(UGs),which influences their gliding efficiency and energy consumption.This paper analyzes the optimal matching between the net buoyancy and the pitching angle and proposes a segmented control strategy of Petrel-L.The optimization of this strategy is established based on the gliding range model of UG,which is solved based on the approximate model,and the variations of the optimal control parameters with the hotel load are obtained.The optimization results indicate that the segmented control strategy can significantly increase the gliding range when the optimal matching between the net buoyancy and the pitching angle is reached,and the increase rate is influenced by the hotel load.The gliding range of the underwater glider can be increased by 10.47%at a hotel load of 0.5 W.The optimal matching analysis adopted in this study can be applied to other UGs to realize endurance improvement.

A Marine Environment Early Warning Algorithm Based on Marine Data Sampled by Multiple Underwater Gliders

This study analyzes and summarizes seven main characteristics of the marine data sampled by multiple underwater gliders. These characteristics such as the big data volume and data sparseness make it extremely difficult to do some meaningful applications like early warning of marine environment. In order to make full use of the sea trial data, this paper gives the definition of two types of marine data cube which can integrate the big marine data sampled by multiple underwater gliders along saw-tooth paths, and proposes a data fitting algorithm based on time extraction and space compression(DFTS) to construct the temperature and conductivity data cubes. This research also presents an early warning algorithm based on data cube(EWDC) to realize the early warning of a new sampled data file.Experiments results show that the proposed methods are reasonable and effective. Our work is the first study to do some realistic applications on the data sampled by multiple underwater vehicles, and it provides a research framework for processing and analyzing the big marine data oriented to the applications of underwater gliders.

A hybrid forecasting model for depth-averaged current velocities of underwater gliders

In this paper,we propose a hybrid forecasting model to improve the forecasting accuracy for depth-averaged current velocities(DACVs) of underwater gliders.The hybrid model is based on a discrete wavelet transform(DWT),a deep belief network(DBN),and a least squares support vector machine(LSSVM).The original DACV series are first decomposed into several high-and one low-frequency subseries by DWT.Then,DBN is used for high-frequency component forecasting,and the LSSVM model is adopted for low-frequency subseries.The effectiveness of the proposed model is verified by two groups of DACV data from sea trials in the South China Sea.Based on four general error criteria,the forecast performance of the proposed model is demonstrated.The comparison models include some well-recognized single models and some related hybrid models.The performance of the proposed model outperformed those of the other methods indicated above.

Energy Storage System with Ultracapacitors for Thermal Underwater Glider

A power system with proton exchange membrane fuel cells (PEMFC) was designed for thermal underwater glider.Heat generated by PEMFC is used as the propulsion power of the glider,and the electricity is used in the control and sensor system.An electric energy storage system (ESS) is required which possesses high power density with good cycle life.Ultracapacitors which exhibit high power density and cycle life are considered as energy storage devices.Simulations based on a specific voyage condition indicate that ESS with ultracapacitors has positive effects on reducing the output power demand of PEMFC and lightening the power system.Experimental results show that the state of charge (SOC) is related to the capacitance and resistance in ultracapacitor ESS.

水下滑翔机轻量化建模及执行器约束下非线性MPC控制器设计

针对现有水下滑翔机模型非线性程度和维度过高以及难以设计有效的工程化控制器的问题,首先根据水下滑翔机的运动机构组成及工作原理,忽略建模过程中的次要影响因素,对水下滑翔机进行轻量化建模以降低模型非线性度及复杂度,并通过对比验证证明了轻量化模型的有效性。随后,针对纵垂面运动进一步精简动力学方程,发挥该模型维度低、计算量小的优点,引入状态和控制量的实际约束,设计了贴合实际的实时线性化模型预测姿态控制算法。数值仿真结果证明,在±17.4°和±22.5°等水下滑翔机常见工况下,所提出的基于轻量化模型的控制算法可有效快速追踪期望姿态,且上升时间和稳态调节时间均比传统控制器提高70%以上。