Objective To investigate the methods to maintain leg equalization for patients undergoing primary total hip joint replacement. Methods 40 patients,45 hips with various diseases were treated by total hip joint replacem...Objective To investigate the methods to maintain leg equalization for patients undergoing primary total hip joint replacement. Methods 40 patients,45 hips with various diseases were treated by total hip joint replacement from Jan 2000 to Sep 2001.Before operation, the perpendicular length from center of femoral head to the summit of great tuberosity and the tip of less tuberosity to the line of bilateral ischial tuberosity were measured; the length from anterior superior iliac spine to medial malleolus were measured at same time.Leg length was decided and corrected according to these lines. Results Before operation, shortening of limbs were presented in 39 hips, 1 to 4 cm, average 2.4 cm.After operation, discrepancy of both legs was 0~0.8 cm.Apparent limps were not observed in all patients. Conclusion This measurement is a useful method to maintain and recover leg length in total hip joint replacement.展开更多
The effect of through-thickness reinforcement by composite pins (Z-pins) on the static tensile strength and failure mechanisms of the joints made from ceramic matrix composite (CMC) is investigated. Overlap length...The effect of through-thickness reinforcement by composite pins (Z-pins) on the static tensile strength and failure mechanisms of the joints made from ceramic matrix composite (CMC) is investigated. Overlap length of the single lap joint is 15 mm, 20 mm, 23 mm, 37 mm, and 60 mm, respectively. The experimental results indicate that the final failure modes of the joints can be divided into two groups, (a) the bond-line stops debonding until crack encounters Z-pins; and then the adherends break at the location of Z-pins, when overlap length is more than 20 mm; (b) the bond-line detaches entirely and Z-pins are drawn from adherends, when overlap length is equal to 15 mm. A simple efficient computational approach is presented for analyzing the benefit of through-thickness pins for restricting failure in the single lap joints. Here, the mechanics problem is simplified by representing the effect of the pins by tractions acting on the fracture surfaces of the cracked bond-line. The tractions are prescribed as functions of the crack displacement, which are available in simple forms that summarize the complex deformations to a reasonable accuracy. The resulting model can be used to track the evolution of complete failure mechanisms, for example, bond-line initial delamination and ultimate failure associated with Z-pin pullout, ultimate failure of the adherends. The paper simulates connecting performance of the single lap joints with different Z-pins' diameter, spacing and overlap length; the numerical results agree with the experimental results; the numerical results indicate enlarging diameter and decreasing spacing of Z-pins are in favor of improving the connecting performance of the joints. By numerical analysis method, the critical overlap length that lies between two final failure modes is between 18 mm and 19 mm, when Z-pins' diameter and spacing are 0.4 mm, 5 mm, respectively.展开更多
Four exterior joints with special-shaped columns which have different lengths of limbs are tested under low cyclic loading. Speeial-shaped columns adopted are L- and T-shaped in section. It can be concluded that crack...Four exterior joints with special-shaped columns which have different lengths of limbs are tested under low cyclic loading. Speeial-shaped columns adopted are L- and T-shaped in section. It can be concluded that crack pattern, failure mode and shear strength of joints are affected by the length of limb, and that shear strength and ductility increase with the length of limb; the joints with the flexural failure of the beam have better seismic behavior than those with the shear failure of the joint core.展开更多
Most of multimedia schemes employ variable-length codes (VLCs) like Huffman code as core components in obtaining high compression rates. However VLC methods are very sensitive to channel noise. The goal of this pape...Most of multimedia schemes employ variable-length codes (VLCs) like Huffman code as core components in obtaining high compression rates. However VLC methods are very sensitive to channel noise. The goal of this paper is to salvage as many data from the damaged packets as possible for higher audiovisual quality. This paper proposes an integrated joint source-channel decoder (I-JSCD) at a symbol-level using three-dimensional (3-D) trellis representation for first-order Markov sources encoded with VLC source code and convolutional channel code. This method combines source code and channel code state-spaces and bit-lengths to construct a two-dimensional (2-D) state-space, and then develops a 3-D trellis and a maximum a-posterior (MAP) algorithm to estimate the source sequence symbol by symbol. Experiment results demonstrate that our method results in significant improvement in decoding performance, it can salvage at least half of (50%) data in any channel error rate, and can provide additional error resilience to VLC stream like image, audio, video stream over high error rate links.展开更多
The exponential weighted moving average technique used in process mean and variance monitoring charts was combined by Gan in 1997 and proposed two combined joint monitoring schemes one with rectangular control region ...The exponential weighted moving average technique used in process mean and variance monitoring charts was combined by Gan in 1997 and proposed two combined joint monitoring schemes one with rectangular control region and the other with elliptical control region. Performance of these two schemes may very depend on the shifts in mean or variance to be detected quickly. In this paper, performances of these two schemes are evaluated with respect to the average run length properties. The results reveal that elliptical scheme is little faster in detecting the shifts in process mean and increase in variance within a limit.展开更多
This paper proposes an integrated joint source-channel decoder (I-JSCD) using Max-Log-MAP method for sources encoded with exp-Golomb codes and convolutional codes, and proposes a system applying this method to decod...This paper proposes an integrated joint source-channel decoder (I-JSCD) using Max-Log-MAP method for sources encoded with exp-Golomb codes and convolutional codes, and proposes a system applying this method to decoding the VLC data, e.g. motion vector differences (MVDs), of H.264 across an AWGN channel. This method combines the source code state-space and the channel code state-space together to construct a joint state-space, develops a 3-D trellis and a maximum a-posterior (MAP) algorithm to estimate the source sequence symbol by symbol, and then uses max-log approximation to simplify the algorithm. Experiments indicate that the proposed system gives significant improvements on peak signal-to-noise ratio (PSNR) (maximum about 15 dB) than a separate scheme. This also leads to a higher visual quality of video stream over a highly noisy channel.展开更多
In this paper, we present a Joint Source-Channel Decoding algorithm (JSCD) for Low-Density Parity Check (LDPC) codes by modifying the Sum-Product Algorithm (SPA) to account for the source redun-dancy, which results fr...In this paper, we present a Joint Source-Channel Decoding algorithm (JSCD) for Low-Density Parity Check (LDPC) codes by modifying the Sum-Product Algorithm (SPA) to account for the source redun-dancy, which results from the neighbouring Huffman coded bits. Simulations demonstrate that in the presence of source redundancy, the proposed algorithm gives better performance than the Separate Source and Channel Decoding algorithm (SSCD).展开更多
文摘Objective To investigate the methods to maintain leg equalization for patients undergoing primary total hip joint replacement. Methods 40 patients,45 hips with various diseases were treated by total hip joint replacement from Jan 2000 to Sep 2001.Before operation, the perpendicular length from center of femoral head to the summit of great tuberosity and the tip of less tuberosity to the line of bilateral ischial tuberosity were measured; the length from anterior superior iliac spine to medial malleolus were measured at same time.Leg length was decided and corrected according to these lines. Results Before operation, shortening of limbs were presented in 39 hips, 1 to 4 cm, average 2.4 cm.After operation, discrepancy of both legs was 0~0.8 cm.Apparent limps were not observed in all patients. Conclusion This measurement is a useful method to maintain and recover leg length in total hip joint replacement.
基金supported by the National Natural Science Foundation of China (No. 90405015)the Research Fund forthe Doctoral Program of Higher Education (No. 20030699040).
文摘The effect of through-thickness reinforcement by composite pins (Z-pins) on the static tensile strength and failure mechanisms of the joints made from ceramic matrix composite (CMC) is investigated. Overlap length of the single lap joint is 15 mm, 20 mm, 23 mm, 37 mm, and 60 mm, respectively. The experimental results indicate that the final failure modes of the joints can be divided into two groups, (a) the bond-line stops debonding until crack encounters Z-pins; and then the adherends break at the location of Z-pins, when overlap length is more than 20 mm; (b) the bond-line detaches entirely and Z-pins are drawn from adherends, when overlap length is equal to 15 mm. A simple efficient computational approach is presented for analyzing the benefit of through-thickness pins for restricting failure in the single lap joints. Here, the mechanics problem is simplified by representing the effect of the pins by tractions acting on the fracture surfaces of the cracked bond-line. The tractions are prescribed as functions of the crack displacement, which are available in simple forms that summarize the complex deformations to a reasonable accuracy. The resulting model can be used to track the evolution of complete failure mechanisms, for example, bond-line initial delamination and ultimate failure associated with Z-pin pullout, ultimate failure of the adherends. The paper simulates connecting performance of the single lap joints with different Z-pins' diameter, spacing and overlap length; the numerical results agree with the experimental results; the numerical results indicate enlarging diameter and decreasing spacing of Z-pins are in favor of improving the connecting performance of the joints. By numerical analysis method, the critical overlap length that lies between two final failure modes is between 18 mm and 19 mm, when Z-pins' diameter and spacing are 0.4 mm, 5 mm, respectively.
文摘Four exterior joints with special-shaped columns which have different lengths of limbs are tested under low cyclic loading. Speeial-shaped columns adopted are L- and T-shaped in section. It can be concluded that crack pattern, failure mode and shear strength of joints are affected by the length of limb, and that shear strength and ductility increase with the length of limb; the joints with the flexural failure of the beam have better seismic behavior than those with the shear failure of the joint core.
基金Supported by the Foundation of Ministry of Education of China (211CERS10)
文摘Most of multimedia schemes employ variable-length codes (VLCs) like Huffman code as core components in obtaining high compression rates. However VLC methods are very sensitive to channel noise. The goal of this paper is to salvage as many data from the damaged packets as possible for higher audiovisual quality. This paper proposes an integrated joint source-channel decoder (I-JSCD) at a symbol-level using three-dimensional (3-D) trellis representation for first-order Markov sources encoded with VLC source code and convolutional channel code. This method combines source code and channel code state-spaces and bit-lengths to construct a two-dimensional (2-D) state-space, and then develops a 3-D trellis and a maximum a-posterior (MAP) algorithm to estimate the source sequence symbol by symbol. Experiment results demonstrate that our method results in significant improvement in decoding performance, it can salvage at least half of (50%) data in any channel error rate, and can provide additional error resilience to VLC stream like image, audio, video stream over high error rate links.
基金Supported by the National Natural Science Foundation of China(50674063, 50534080) the Special Expense of"Taishan Scholar" Conslxuction in Shandong Province.
文摘The exponential weighted moving average technique used in process mean and variance monitoring charts was combined by Gan in 1997 and proposed two combined joint monitoring schemes one with rectangular control region and the other with elliptical control region. Performance of these two schemes may very depend on the shifts in mean or variance to be detected quickly. In this paper, performances of these two schemes are evaluated with respect to the average run length properties. The results reveal that elliptical scheme is little faster in detecting the shifts in process mean and increase in variance within a limit.
基金Supported by the Foundation of Ministry of Education of China (211CERS10)
文摘This paper proposes an integrated joint source-channel decoder (I-JSCD) using Max-Log-MAP method for sources encoded with exp-Golomb codes and convolutional codes, and proposes a system applying this method to decoding the VLC data, e.g. motion vector differences (MVDs), of H.264 across an AWGN channel. This method combines the source code state-space and the channel code state-space together to construct a joint state-space, develops a 3-D trellis and a maximum a-posterior (MAP) algorithm to estimate the source sequence symbol by symbol, and then uses max-log approximation to simplify the algorithm. Experiments indicate that the proposed system gives significant improvements on peak signal-to-noise ratio (PSNR) (maximum about 15 dB) than a separate scheme. This also leads to a higher visual quality of video stream over a highly noisy channel.
文摘In this paper, we present a Joint Source-Channel Decoding algorithm (JSCD) for Low-Density Parity Check (LDPC) codes by modifying the Sum-Product Algorithm (SPA) to account for the source redun-dancy, which results from the neighbouring Huffman coded bits. Simulations demonstrate that in the presence of source redundancy, the proposed algorithm gives better performance than the Separate Source and Channel Decoding algorithm (SSCD).