ADC-GERT network parameter estimation model for mission effectiveness of joint operation system

Effectiveness evaluation of the joint operation system is an important basis for the demonstration and development of weapon equipment.With the consideration that existing models of system effectiveness evaluation seldom describe the structural relationship among equipment clearly as well as reflect the dynamic,the analog-to-digital converter-graphical evaluation and review technique(ADC-GERT)network parameter estimation model is proposed based on the ADC model and the joint operation system structure.Firstly,analysis of the joint operation system structure and operation process is conducted to build the GERT network,where equipment subsystems are nodes and activities are directed arches.Then the mission effectiveness of equipment subsystems is calculated by the ADC model.The probability transfer parameters are modified by the mission effectiveness of equipment subsystems based on the Bayesian theorem,with the ADC-GERT network parameter estimation model constructed.Finally,a case study is used to validate the efficiency and dynamic of the ADC-GERT network parameter estimation model.

Study on the Characteristics of A New Hybrid Mooring System for DualPlatform Joint Operations

As the sustainable exploitation of marine resources develops,dual-platform joint operation has caught increasing attention.Dual-platform joint operation requires smaller relative motion between the two sub-platforms,which is normally difficult to be satisfied by the traditional mooring system.Therefore,a new hybrid mooring system is developed and studied in this article.To ensure safety during platform movements,both the number of anchor chains and the relative motion between the two sub-platforms are reduced in the new hybrid mooring system.By performing numerical simulations based on three-dimensional potential flow theory in AQWA and physical experiments,the performances of both the new hybrid and traditional mooring systems under two different wave conditions(i.e.,working wave and freak wave conditions) are systematically investigated.Regarding the new hybrid mooring system,the relative stability between the two sub-platforms of the new system is better,and the platforms can restore stability faster when affected by freak waves.

A survey on joint-operation application for unmanned swarm formations under a complex confrontation environment

With the rapid development of informatization,autonomy and intelligence,unmanned swarm formation intelligent operations will become the main combat mode of future wars.Typical unmanned swarm formations such as ground-based directed energy weapon formations,space-based kinetic energy weapon formations,and sea-based carrier-based formations have become the trump card for winning future wars.In a complex confrontation environment,these sophisticated weapon formation systems can precisely strike mobile threat group targets,making them extreme deterrents in joint combat applications.Based on this,first,this paper provides a comprehensive summary of the outstanding advantages,strategic position and combat style of unmanned clusters in joint warfare to highlight their important position in future warfare.Second,a detailed analysis of the technological breakthroughs in four key areas,situational awareness,heterogeneous coordination,mixed combat,and intelligent assessment of typical unmanned aerial vehicle(UAV)swarms in joint warfare,is presented.An in-depth analysis of the UAV swarm communication networking operating mechanism during joint warfare is provided to lay the theoretical foundation for subsequent cooperative tracking and control.Then,an indepth analysis of the shut-in technology requirements of UAV clusters in joint warfare is provided to lay a theoretical foundation for subsequent cooperative tracking control.Finally,the technical requirements of UAV clusters in joint warfare are analysed in depth so the key technologies can form a closed-loop kill chain system and provide theoretical references for the study of intelligent command operations.

Autonomous process collaboration framework for C4ISR system interoperation

Interoperability plays an important role in the joint command, control, communication, computer, intelligence, surveillance, reconnaissance(C4 ISR) operations. Coordinating and integrating operational processes to fulfill a common mission are challenged by the ever-changing battlefield and hence requires a cross-organizational process management that produces an autonomous, flexible and adaptable architecture for collaborative process evolution. The traditional business process collaboration pattern is based on the predefined "public-view" perspective and cannot meet the requirement of the joint task operations. This paper proposes a flexible visibility control mechanism and a dynamic collaboration framework for modeling and generating collaborative processes. The mechanism allows collaborators to define a set of visibility rules to generate different views of the private processes for different collaborations, which gives a great flexibility for the collaboration initiator to decide on an appropriate collaboration pattern. The framework supports collaborators to dynamically and recursively add a new process or even a new organization to an existing collaboration. Moreover, a formal representation of the processes and a set of generation algorithms are provided to consolidate the proposed theory.

Simulation-optimization model of reservoir operation based on target storage curves

This paper proposes a new storage allocation rule based on target storage curves. Joint operating rules are also proposed to solve the operation problems of a multi-reservoir system with joint demands and water transfer-supply projects. The joint operating rules include a water diversion rule to determine the amount of diverted water in a period, a hedging rule based on an aggregated reservoir to determine the total release from the system, and a storage allocation rule to specify the release from each reservoir. A simulation-optimization model was established to optimize the key points of the water diversion curves, the hedging rule curves, and the target storage curves using the improved particle swarm optimization （IPSO） algorithm. The multi-reservoir water supply system located in Liaoning Province, China, including a water transfer-supply project, was employed as a case study to verify the effectiveness of the proposed join operating rules and target storage curves. The results indicate that the proposed operating rules are suitable for the complex system. The storage allocation rule based on target storage curves shows an improved performance with regard to system storage distribution.

Comparison of channel geometry changes in Inner Mongolian reach of the Yellow River before and after joint operation of large upstream reservoirs

The impact of reservoirs on downstream river channel change has been a scientific issue in fluvial geomorphology during the last few decades. However, it is still a difficult issue as to how to express quantitatively the channel adjustment in the Inner Mongolian reach of the Yellow River induced by the joint operation of upstream reservoirs. Based on the shape parameters of channel cross-sections at four gauging stations in this river reach over a flooding season in two periods, 1978–1982 and 2008–2012, the present work investigated the channel changes in terms of shape parameter change rate under the same controlling water level in each flooding season at the channel cross-sections. Results showed that most of the change rates of the parameters evidently increased over a flooding season in both periods. However, the change rate of each parameter at the cross-sections decreased evidently in the latter period, compared with the former period. At the same time, the distribution pattern of the change rate of the shape parameters along the cross-sections thus changed from a convex curve in the former period to an S-shaped curve in the latter period. The obvious decrease of the change rates is related to the joint operation of the Liujiaxia and Longyangxia reservoirs. The reservoirs stored a large volume of water and decreased the peak discharge and maximum velocity in the flooding season; as a result, the erosion ability of the flood decreased accordingly. With the joint operation of the large reservoirs, the Inner Mongolian channel shrunk markedly. Therefore, the channel will present the possibility of an extreme flood in the future. Consequently, it is reasonable to adjust the function of the reservoirs in future. The total water and sediment discharges and the peak discharge in flooding seasons should be effectively controlled. Continuous shrinkage of the channel can thus be avoided and it can be ready for a potential extreme flood.

Nonlinear dynamic analysis and fatigue damage assessment for a deepwater test string subjected to random loads

The deepwater test string is an important but vulnerable component in offshore petroleum exploration,and its durability significantly affects the success of deepwater test operations.Considering the influence of random waves and the interaction between the test string and the riser,a time-domain nonlinear dynamic model of a deepwater test string is developed.The stress-time history of the test string is obtained to study vibration mechanisms and fatigue development in the test string.Several recommendations for reducing damage are proposed.The results indicate that the amplitude of dynamic response when the string is subjected to random loads gradually decreases along the test string,and that the von Mises stress is higher in the string sections near the top of the test string and the flex joints.In addition,the fatigue damage fluctuates with the water depth,and the maximum damage occurs in string sections adjacent to the lower flex joint and in the splash zone.Several measures are proposed to improve the operational safety of deepwater test strings：applying greater top tension,operating in a favorable marine environment,managing the order of the test string joints,and performing nondestructive testing of components at vulnerable positions.