The aim of this work was to study the effect of UHMWPE crosslinking on wear performance. Differently treated UHMWPEs were studied by means of unidirectional and multidirectional wear tests. Unidirectional tests simula...The aim of this work was to study the effect of UHMWPE crosslinking on wear performance. Differently treated UHMWPEs were studied by means of unidirectional and multidirectional wear tests. Unidirectional tests simulate total knee replacement and multidirectional tests simulate total hip replacement movements. The samples tested were observed by optical and scanning electron microscopy in order to determine wear mechanisms that explain the dif-ferent results obtained in the uni- and multidirectional wear tests performed.展开更多
1.IntroductionAt present,joint prostheses are made ofmetallic materials in combination withpolymers,viz Ti6A14V alloy,CoCrMo alloyor 316 L stainless steel matching withultra-high molecular weight polyethylene(UHMWPE)....1.IntroductionAt present,joint prostheses are made ofmetallic materials in combination withpolymers,viz Ti6A14V alloy,CoCrMo alloyor 316 L stainless steel matching withultra-high molecular weight polyethylene(UHMWPE).In view of function of jointprostheses,the suitable materials shouldhave the following properties:firstly,highwear resistance and low friction coefficient展开更多
Wear tests were carried out to study the effect of various counterface materials in the wear behaviour of Ultra High Molecular Weight Polyethylene (UHMWPE). The materials used as counterfaces were based on varieties o...Wear tests were carried out to study the effect of various counterface materials in the wear behaviour of Ultra High Molecular Weight Polyethylene (UHMWPE). The materials used as counterfaces were based on varieties of CoCrMo: 1) forged (hand-polished) CoCrMo, 2) forged (mass-finished) CoCrMo, and 3) cast (mass-finished) CoCrMo. Addi-tionally, two coatings were proposed: 1) a CoCrMo coating applied to the forged CoCrMo alloy by means of physical vapour deposition (PVD), and 2) a ZrO2 coating applied to the forged CoCrMo alloy by means of plasma-assisted chemical vapour deposition (PACVD). The reciprocating pin-on-flat (RPOF) de-vice for pin-on-disk wear testing was used for this study. The worn surfaces were observed using optical, atomic force and scanning electron microscopes.展开更多
Wear tests were carried out to study the effect of the hardness and roughness with various counterface materials on UHMWPE wear behaviour. The materials used as counterfaces were based on varieties of CoCrMo: 1) forge...Wear tests were carried out to study the effect of the hardness and roughness with various counterface materials on UHMWPE wear behaviour. The materials used as counterfaces were based on varieties of CoCrMo: 1) forged (hand-polished) CoCrMo, 2) forged (mass-finished) CoCrMo, and 3) cast (mass-finished) CoCrMo. Additionally, two coatings were proposed: 1) a CoCrMo coating applied to the forged CoCrMo alloy by means of physical vapour deposition (PVD), and 2) a ZrO2 coating applied to the forged CoCrMo alloy by means of plasma-assisted chemical vapour deposition (PACVD). The reciprocating pin-on-flat (RPOF) device for pin-on-disk wear testing was used for this study. The worn surfaces were observed using optical, atomic force and scanning electron microscopes.展开更多
目的:分析固定-活动义齿在牙齿重度磨耗伴缺失治疗中的应用效果。方法:回顾性分析2020年2月-2021年10月在笔者医院行口腔修复治疗的88例牙齿重度磨耗伴缺失患者的临床资料,按治疗方式的不同分为对照组(n=43,活动义齿修复)和研究组(n=45...目的:分析固定-活动义齿在牙齿重度磨耗伴缺失治疗中的应用效果。方法:回顾性分析2020年2月-2021年10月在笔者医院行口腔修复治疗的88例牙齿重度磨耗伴缺失患者的临床资料,按治疗方式的不同分为对照组(n=43,活动义齿修复)和研究组(n=45,固定-活动义齿修复)。修复后半年判定两组修复效果,并比较两组患者修复前及修复后半年咀嚼效能、颞下颌关节(Temporomandibularjoint,TMJ)功能、生活质量及修复满意度。结果:研究组修复效果(95.56%)明显高于对照组(81.40%)(P<0.05);修复后两组咬合力、咀嚼效率和修复前相比均明显增高(P<0.05),且研究组高于对照组(P<0.05);修复后两组Helkimo临床功能障碍指数、TMJ功能指数(Fricton指数)中的TMJ紊乱指数评分、口腔健康影响程度量表14(Oral health impact scale 14,OHIP-14)评分和修复前相比均明显降低(P<0.05),且研究组低于对照组(P<0.05);研究组患者修复满意度评分高于对照组(P<0.05)。结论:应用固定-活动义齿对牙齿重度磨耗伴缺失患者进行修复的效果较佳,可明显改善患者咀嚼效能和TMJ功能,有效提高其生活质量,并能够提升患者满意度。展开更多
A modified single melt technique involving joint charging was developed for preparation of aluminum bronze, Cu-14%Al-X(mass fraction) alloy, which could be used as die materials. The mechanical properties and wear beh...A modified single melt technique involving joint charging was developed for preparation of aluminum bronze, Cu-14%Al-X(mass fraction) alloy, which could be used as die materials. The mechanical properties and wear behavior of the developed alloy under boundary-lubrication conditions was investigated. The results demonstrate that all the phases disperse homogeneously in the bronze matrix with a significant amount of discrete and spherical brittle and hard γ2 phase, moreover, the dispersed κ phase are the dominant factor that improves the anti-deformation properties of the soft matrix, after a solution treatment at 920 ℃ for 2 h and followed by aging at 580 ℃ for 3 h, thus remarkably improves the mechanical properties and wear resistance of the developed alloy. The Cu-14%Al-X alloy can be used as materials for static precise stretching and squeezing dies.展开更多
文摘The aim of this work was to study the effect of UHMWPE crosslinking on wear performance. Differently treated UHMWPEs were studied by means of unidirectional and multidirectional wear tests. Unidirectional tests simulate total knee replacement and multidirectional tests simulate total hip replacement movements. The samples tested were observed by optical and scanning electron microscopy in order to determine wear mechanisms that explain the dif-ferent results obtained in the uni- and multidirectional wear tests performed.
文摘1.IntroductionAt present,joint prostheses are made ofmetallic materials in combination withpolymers,viz Ti6A14V alloy,CoCrMo alloyor 316 L stainless steel matching withultra-high molecular weight polyethylene(UHMWPE).In view of function of jointprostheses,the suitable materials shouldhave the following properties:firstly,highwear resistance and low friction coefficient
文摘Wear tests were carried out to study the effect of various counterface materials in the wear behaviour of Ultra High Molecular Weight Polyethylene (UHMWPE). The materials used as counterfaces were based on varieties of CoCrMo: 1) forged (hand-polished) CoCrMo, 2) forged (mass-finished) CoCrMo, and 3) cast (mass-finished) CoCrMo. Addi-tionally, two coatings were proposed: 1) a CoCrMo coating applied to the forged CoCrMo alloy by means of physical vapour deposition (PVD), and 2) a ZrO2 coating applied to the forged CoCrMo alloy by means of plasma-assisted chemical vapour deposition (PACVD). The reciprocating pin-on-flat (RPOF) de-vice for pin-on-disk wear testing was used for this study. The worn surfaces were observed using optical, atomic force and scanning electron microscopes.
文摘Wear tests were carried out to study the effect of the hardness and roughness with various counterface materials on UHMWPE wear behaviour. The materials used as counterfaces were based on varieties of CoCrMo: 1) forged (hand-polished) CoCrMo, 2) forged (mass-finished) CoCrMo, and 3) cast (mass-finished) CoCrMo. Additionally, two coatings were proposed: 1) a CoCrMo coating applied to the forged CoCrMo alloy by means of physical vapour deposition (PVD), and 2) a ZrO2 coating applied to the forged CoCrMo alloy by means of plasma-assisted chemical vapour deposition (PACVD). The reciprocating pin-on-flat (RPOF) device for pin-on-disk wear testing was used for this study. The worn surfaces were observed using optical, atomic force and scanning electron microscopes.
文摘目的:分析固定-活动义齿在牙齿重度磨耗伴缺失治疗中的应用效果。方法:回顾性分析2020年2月-2021年10月在笔者医院行口腔修复治疗的88例牙齿重度磨耗伴缺失患者的临床资料,按治疗方式的不同分为对照组(n=43,活动义齿修复)和研究组(n=45,固定-活动义齿修复)。修复后半年判定两组修复效果,并比较两组患者修复前及修复后半年咀嚼效能、颞下颌关节(Temporomandibularjoint,TMJ)功能、生活质量及修复满意度。结果:研究组修复效果(95.56%)明显高于对照组(81.40%)(P<0.05);修复后两组咬合力、咀嚼效率和修复前相比均明显增高(P<0.05),且研究组高于对照组(P<0.05);修复后两组Helkimo临床功能障碍指数、TMJ功能指数(Fricton指数)中的TMJ紊乱指数评分、口腔健康影响程度量表14(Oral health impact scale 14,OHIP-14)评分和修复前相比均明显降低(P<0.05),且研究组低于对照组(P<0.05);研究组患者修复满意度评分高于对照组(P<0.05)。结论:应用固定-活动义齿对牙齿重度磨耗伴缺失患者进行修复的效果较佳,可明显改善患者咀嚼效能和TMJ功能,有效提高其生活质量,并能够提升患者满意度。
基金Project(GS992-A52-052) supported by the Natural Science Foundation of Gansu Province, China
文摘A modified single melt technique involving joint charging was developed for preparation of aluminum bronze, Cu-14%Al-X(mass fraction) alloy, which could be used as die materials. The mechanical properties and wear behavior of the developed alloy under boundary-lubrication conditions was investigated. The results demonstrate that all the phases disperse homogeneously in the bronze matrix with a significant amount of discrete and spherical brittle and hard γ2 phase, moreover, the dispersed κ phase are the dominant factor that improves the anti-deformation properties of the soft matrix, after a solution treatment at 920 ℃ for 2 h and followed by aging at 580 ℃ for 3 h, thus remarkably improves the mechanical properties and wear resistance of the developed alloy. The Cu-14%Al-X alloy can be used as materials for static precise stretching and squeezing dies.
