Throughput Maximization for Multi-UAV Enabled Millimeter Wave WPCN: Joint Time and Power Allocation

In this paper,we investigate the effective deployment of millimeter wave(mmWave)in unmanned aerial vehicle(UAV)-enabled wireless powered communication network(WPCN).In particular,a novel framework for optimizing the performance of such UAV-enabled WPCN in terms of system throughput is proposed.In the considered model,multiple UAVs monitor in the air along the scheduled flight trajectory and transmit monitoring data to micro base stations(mBSs)with the harvested energy via mmWave.In this case,we propose an algorithm for jointly optimizing transmit power and energy transfer time.To solve the non-convex optimization problem with tightly coupled variables,we decouple the problem into more tractable subproblems.By leveraging successive convex approximation(SCA)and block coordinate descent techniques,the optimal solution is obtained by designing a two-stage joint iteration optimization algorithm.Simulation results show that the proposed algorithm with joint transmit power and energy transfer time optimization achieves significant performance gains over Q-learning method and other benchmark schemes.

An Anisotropic Geomechanical Model for Jointed Rock Masses at Taishan Nuclear Power Station, Southern China

An anisotropic geomechanical model for jointed rock mass is presented. Simultaneously with deriving the orthotropic anisotropy elastic parameters along the positive axis, the equivalent compliance matrix for the deflection axis orthotropic anisotropy was derived through a three- dimensional coordinate transformation. In addition, Singh＇s analysis of the stress concentration effects of intermittent joints was adopted, based on two groups of intermittent joints and a set of cross- cutting joints in the jointed rock mass. The stress concentration effects caused by intermittent joints and the coupling effect of cross-cutting joints along the deflection-axis are also considered. The proposed anisotropic mechanics parameters method is applied to determine the deformation parameters of jointed granite at the Taishan Nuclear Power Station. Combined with the deterministic mechanical parameters of rock blocks and joints, the deformation parameters and their variability in jointed rock masses are estimated quantitatively. The computed results show that jointed granite at the Taishan Nuclear Power Station exhibits typical anisotropic mechanical characteristics; the elastic moduli in the two horizontal directions were similar, but the elastic modulus in the vertical direction was much greater. Jointed rock elastic moduli in the two horizontal and vertical directions were respectively about 24% and 37% of the core of rock, showing weakly orthotropic anisotropy; the ratio of elastic moduli in the vertical and horizontal directions was 1.53, clearly indicating the transversely isotropic rock mass mechanical characteristics. The method can be popularized to solve other rock mechanics problems in nuclear power engineering.

Joint DOA and polarization estimation for unequal power sources based on reconstructed noise subspace

In most literature about joint direction of arrival（DOA） and polarization estimation, the case that sources possess different power levels is seldom discussed. However, this case exists widely in practical applications, especially in passive radar systems. In this paper, we propose a joint DOA and polarization estimation method for unequal power sources based on the reconstructed noise subspace. The invariance property of noise subspace（IPNS） to power of sources has been proved an effective method to estimate DOA of unequal power sources. We develop the IPNS method for joint DOA and polarization estimation based on a dual polarized array. Moreover, we propose an improved IPNS method based on the reconstructed noise subspace, which has higher resolution probability than the IPNS method. It is theoretically proved that the IPNS to power of sources is still valid when the eigenvalues of the noise subspace are changed artificially. Simulation results show that the resolution probability of the proposed method is enhanced compared with the methods based on the IPNS and the polarimetric multiple signal classification（MUSIC） method. Meanwhile, the proposed method has approximately the same estimation accuracy as the IPNS method for the weak source.

A novel adaptive joint power control algorithm with channel estimation in a CDMA cellular system

Joint power control has advantages of multi-user detection and power control; and it can combat the multi-access interference and the near-far problem. A novel adaptive joint power control algorithm with channel estimation in a CDMA cellular system was designed. Simulation results show that the algorithm can control the power not only quickly but also precisely with a time change. The method is useful for increasing system capacity.

Research on Coordinated Development and Optimization of Distribution Networks at All Levels in Distributed Power Energy Engineering

The uncertainty of distributed generation energy has dramatically challenged the coordinated development of distribution networks at all levels.This paper focuses on the multi-time-scale regulation model of distributed generation energy under normal conditions.The simulation results of the example verify the self-optimization characteristics and the effectiveness of real-time dispatching of the distribution network control technology at all levels under multiple time scales.

A Weighted Combination Forecasting Model for Power Load Based on Forecasting Model Selection and Fuzzy Scale Joint Evaluation

To solve the medium and long term power load forecasting problem,the combination forecasting method is further expanded and a weighted combination forecasting model for power load is put forward.This model is divided into two stages which are forecasting model selection and weighted combination forecasting.Based on Markov chain conversion and cloud model,the forecasting model selection is implanted and several outstanding models are selected for the combination forecasting.For the weighted combination forecasting,a fuzzy scale joint evaluation method is proposed to determine the weight of selected forecasting model.The percentage error and mean absolute percentage error of weighted combination forecasting result of the power consumption in a certain area of China are 0.7439%and 0.3198%,respectively,while the maximum values of these two indexes of single forecasting models are 5.2278%and 1.9497%.It shows that the forecasting indexes of proposed model are improved significantly compared with the single forecasting models.

Development and Construction of 345 kV Power-Optical Fiber Composite XLPE 2,500 mm2 with Prefabricated Joint

Due to the increasing demand of replacing large capacity overhead lines with underground cables in Korea, KEPCO （Korea Electric Power Corporation） and LS Cable （LS Cable ＆ System） have developed 345 kV optical fiber composite XLPE （cross-linked polyethylene） 2,500 mm2 cable system. This system has been installed in Cheongna district of Incheon city. KEPCO and LS Cable are also planning to build the cooling system in a tunnel in order to reduce the ambient temperature caused by currents. In this paper, the process of development, field installation, and final inspection test of the complete system will be described.

Diagnostic use of superb microvascular imaging in evaluating septic arthritis of the manubriosternal joint:A case report

BACKGROUND Septic arthritis of the manubriosternal joint is a diagnostic challenge due to its rarity and anatomical characteristic.Conventional ultrasound,plain radiographs,and computed tomography are not able to confirm or even suspect arthritis early.Superb microvascular imaging is a new advanced Doppler technique in evaluating low-flow microvascular patterns.The higher sensitivity for increased perisynovial vascularity helps to suspect septic arthritis and forms a methodical approach to using magnetic resonance imaging(MRI).CASE SUMMARY A 34-year-old immunocompetent woman presented with a fever and a dull ache in the chest radiating to the right arm.Traumatic injury and the most common respiratory and cardiac disorders were ruled out.Blood cultures came back positive for Staphylococcus aureus,and sepsis was confirmed.A small lump was noted on the chest during the first week of hospitalization.Superb microvascular imaging was performed and septic arthritis of the manubriosternal joint was detected.MRI confirmed the diagnosis and showed septic arthritis of the manubriosternal joint with several localized abscesses behind the sternum.The patient was treated for three weeks with intravenous antibiotics and the outcome was favorable:Inflammatory markers became normal,and the lump disappeared.Three months later,the patient was examined for a new episode of mild pain in the sternum and was diagnosed with persistent perichondritis by ultrasound in comparison with MRI.CONCLUSION Superb microvascular imaging is a useful tool for the early diagnosis of septic arthritis of the manubriosternal joint and following-up.

基于TOPSIS-Shapley值法的梯级水电站补偿效益分摊研究

针对流域内联合电站数目众多但利益分配存在纠纷的情况,旨在提出一种更为合理的梯级电站利益分配方法。基于Shapley值法和TOPSIS法,综合考虑电站贡献及电站对不同客观分摊方法的相对满意程度,建立TOPSIS-Shapley值法梯级电站补偿效益分摊模型,同时为解决Shapley值法在求解多利益主体梯级电站联合调度增益分配问题中的局限性,引入聚合降维思想。模型思路如下:将上游电站联合调度前后梯级发电效益的增量作为补偿效益,首先采取四种不同的客观分摊方法对电站特性参数指标进行计算,构成TOPSIS的基础决策矩阵,利用TOPSIS原理得出电站对各个分摊方法的相对满意度,同时采用联盟博弈理论,计算电站所有可能联盟方式下的发电效益,得到基于Shapley值的补偿效益分摊结果,最后将TOPSIS原理得出的分摊系数与由Shapley值法所得的分摊系数结合形成综合分摊权重,应用于黑河上游的八级电站补偿效益分摊中。工程应用实例表明:该方法不仅考虑了联盟电站对整体的边际贡献和各电站的分摊满意程度,且兼顾了电站的特性指标差异,合理量化和分配了各电站间的发电补偿效益,分摊结果公平合理、易被各方接受,可促进流域各级电站参与联合调度从而达到整体效益最大的目标,对于数量较多的梯级水电站补偿效益分配问题具有重要参考意义。

燃料电池增程式动力系统能量管理策略研究

以某款纯电动客车为研究对象,以增加车辆续驶里程为目的,提出燃料电池增程式混合动力系统结构,根据性能指标对动力系统各部件进行匹配计算和选型.提出了开关/功率跟随式能量管理策略,基于Cruise和Simulink分别搭建了整车动力系统模型和燃料电池及能量管理策略模型并进行联合仿真.结果表明,采用文中提出的能量管理策略车辆经济性相对于开关式和能量跟随式两种控制策略分别提高62%和31%,续驶里程相对于该两种控制策略分别提高41%和18%.

前景理论视角下废旧动力电池回收监管演化博弈分析

废旧动力电池具有较强的负外部性,违背了新能源汽车设计的初衷。为促进废旧动力电池有效回收,将前景理论与演化博弈论耦合,综合考虑政府、企业(汽车生产)和公众之间的利益,促使政府和公众对企业进行共同监督,构建三方博弈模型。针对初始意愿、罚款组成、风险态度系数和损失规避系数的不同情况,进行模拟数值仿真,并结合现实中废旧动力电池的认识度、奖惩机制和盈利信心进行分析。研究表明:提高公众或政府的初始监督意愿,可以促进企业回收废旧动力电池;当企业的回收策略为亏损时,提高企业对公众的补偿金额、降低企业的风险态度系数和损失规避系数,可以促进企业积极回收;在废旧动力电池回收过程中,共同监督的效果优于单独监督。

城市轨道交通轨面短波不平顺谱实测研究

针对城市轨道交通诱发的振动噪声问题,对轨面短波不平顺进行研究.首先,对上海市轨道交通线路轨面短波不平顺实测数据进行零均值化、剔除异常值、消除趋势项等预处理.其次,利用改进的协方差法计算得到轨面短波不平顺功率谱,分析轨道类型、曲线半径及钢轨接头对轨面短波不平顺功率谱分布规律的影响.然后,基于非线性最小二乘法对轨面短波不平顺谱进行拟合.最后,提出我国城市轨道交通轨面短波不平顺统计谱表达式.研究结果表明:直线段接头区轨面短波不平顺功率谱密度曲线在整个分析波长范围内具有较多特征峰值;直线段接头区上、下行短波不平顺功率谱密度值随波长的分布特征和数值相差不大,说明上、下行的轨面不平顺状态基本相同;钢轨的磨耗程度与曲线半径呈负相关,内、外轨面不平顺功率谱密度的差异随曲线半径的增大而减小,曲线半径是影响轨面不平顺状态的主要因素之一;线路类型对轨面短波不平顺功率谱的影响不大,不同曲线半径、焊接接头影响明显,在对轨道进行维护和养护时需关注小曲线半径区段以及焊接接头区段的不平顺状态.

含分布式电源和电动汽车的配电网可靠性评估

针对目前大规模分布式电源和电动汽车接入配电网后,给配电网可靠性带来一定影响的问题,提出了一种含有分布式电源和电动汽车的新型配电网的可靠性评估方法。首先,考虑到风光出力的不确定性和相关性,选择拟合性最优的Frank-Copula函数,建立了风光联合出力概率模型。其次,分析了电动汽车用户行为特征,提出了基于动态分时电价的电动汽车有序充放电控制策略。最后,基于改进IEEE-RBTS Bus6测试系统的主馈线F4,对系统的可靠性指标进行计算分析,结果表明所提的风光联合出力模型和有序充放电控制策略可以有效降低对配电网可靠性的影响。

山东半岛附近海域风、浪能资源联合评估

采用ERA5风场驱动第三代浅海海浪数值模式(SWAN),构建山东半岛附近海域波浪模型,得到30 a同步风浪数据,对海上风能和波浪能进行联合评估。评估分析海上风能和波浪能的能源潜力、稳定性及两种资源的相关性、互补性,可为未来风浪资源联合开发提供依据。研究结果表明,该海域风能和波浪能资源丰富,有明显的季节变化特征,冬季资源最为丰富且稳定性较高。两种资源在近岸海域的互补性更强,在渤海西部和黄海北部的近岸海域相关性相对较低,具有更高的联合开发潜力。

能源动力类别研究生产教融合联合培养基地建设模式与实践

培养出满足新时代要求的具有创新精神和实践能力的高水平能源动力类别研究生是我国早日实现“双碳”目标的迫切需求。构建产教融合联合培养基地,是深化产教融合、实现能源动力类别研究生教育高质量发展的关键环节。该文总结长安大学在能源动力类别(动力工程及电气工程)研究生培养中基于产教融合建设联合培养基地的模式及实践工作,提出软-硬件协同构建产教融合联合培养实践基地的理念,具体阐述该理念在动力工程及电气工程等能源动力类别研究生培养中的具体实践与应用,以期为能源动力类别研究生实践创新能力的培养提供参考。

基于二维动态减载和双层MPC的风储联合调频与功率优化分配

风机可以通过减载控制提供调频备用功率,但存在弃风量大的问题。为此,结合储能装置,设计了考虑风速分区与储能荷电状态(SOC)的二维动态减载策略,在提供充足调频备用功率的同时减小了弃风功率。在此基础上,结合双层模型预测控制(MPC)架构,提出了计及机组转矩波动的风储联合调频控制策略,上层MPC将风电场视作整体,通过协调风储出力提升调频效果;下层MPC通过风电场内的功率优化分配以抑制机组的转矩波动,保证调频性能的同时提高了机组运行稳定性。通过仿真分析验证了所提策略的有效性,结果表明该减载策略具有更高的风能利用率,且在调频过程中通过机组的功率优化分配减小了机组的转矩波动,提高了机组运行稳定性。

考虑多类型主体的日前能量-调峰联合市场优化

新型电力系统中,风电渗透率持续攀升,调峰需求随之增加,有必要通过日前能量-调峰联合出清调动市场主体调峰意愿,支撑大规模风电消纳。在对燃煤机组、风电场与储能等多类型市场主体调峰能力与报价规则进行分析的基础上,建立综合考虑燃煤机组深度调峰、启停调峰,风电场主动“弃风”调峰与储能充电调峰的日前能量-调峰联合市场优化模型。模型以能量与调峰辅助服务总采购成本最小为优化目标,同时考虑各市场主体技术约束、投标约束与电网潮流约束,是大规模混合整数规划问题,可采用CPLEX求解器求解。基于改进IEEE 14节点系统的仿真实验验证该文所提日前能量-调峰联合市场优化模型与求解方法的有效性。此外,结合仿真实验对各市场主体参与调峰辅助服务的收益进行详细分析。

基于FL的无蜂窝网络用户调度与功率分配策略

为解决无蜂窝网络系统中用户链路质量差异和通信、计算资源占用不平衡导致的联邦学习(FL)训练性能受限问题,设计了一个联合用户调度和功率分配的优化方案。首先,提出了一种低复杂度的基于资源优先的二次抽样用户调度(RPSS-US)算法,根据用户计算资源的可用性和链路质量选择用户,优先调度对系统容量和全局模型更新贡献较大的用户参与FL任务,提高整体训练性能。随后,提出了一种基于二分法的功率分配(BM-PA)算法,通过优化功率分配改善用户链路质量差异,以提高数据传输速率,减少FL任务的总体时延。通过交替迭代优化这2个子问题,实现系统性能的联合优化。仿真结果表明,相较于其他对比算法,所提出的算法下行吞吐量提升了47.19%,上行吞吐量提升了22.60%,FL任务时间消耗减少了57.33%,并在达到相同模型精度时的时间开销最小。

土工膜与沥青混凝土结构新型接头模型试验研究

为研究土工膜与沥青混凝土结构之间的接头连接方式,基于室内模型试验,从土工膜与沥青混凝土之间的粘结强度、接头适应变形能力、接头防渗性能3个方面论证土工膜与沥青混凝土面板接头的可靠性,提出了土工膜与沥青混凝土结构新型接头连接方式。结果表明:采用SK手刮聚脲将土工膜粘贴至沥青混凝土上,粘结的强度随环境温度降低而升高,5℃时,粘结强度可达到1.0 MPa;通过在接头部位设置鼓包,可以吸收接头变形;HDPE膜与沥青混凝土连接板的接头可以适应上下错动7.8 cm+张开5 cm+剪切7.2 cm的位移;施加变形后对接头进行抗渗试验,接头在0.45 MPa的水压力下可以保持防渗性能。采用SK手刮聚脲将土工膜与沥青混凝土直接粘结,采取合理的施工工艺可保证接头连接的可靠性和适应性,对推广土工膜防渗具有积极意义。

中空螺杆马达井底动力绳索取心钻具的研制与试验

针对大洋钻探硬岩取心钻具钻进效率低、取心效率低等问题,本文介绍了中国地质科学院勘探技术研究所研制的Ø185 mm规格中空螺杆马达井底动力绳索取心钻具的基本研制情况及陆地试验情况。研制过程中,通过理论计算和Ansys Workbench有限元仿真模拟,对中空式螺杆马达螺旋线型的结构进行了优化设计及动力学分析,并对万向节进行了受力安全分析,优选了材质,钻具攻克了多头小偏移量短节距中空转子和柔性中空万向节等关键技术,通过在陆地开展花岗岩块取心试验,验证了该取心钻具原理样机工作性能的可行性,为该钻具的工程应用提供了工作参数指导及匹配钻头的优选,也可为我国大洋钻探及深地科学钻探提供硬岩取心技术支持。