REVISED k-ε TURBULENCE MODEL IN ELECTROMAGNETIC CONTINUOUS CASTING OF MELT

The research is motivated by the ongoing the electromagnetic continuous casting of molten metal. The revised k-ε model considering the effect of magnetic field application was derived. The specific model equations for the electromagnetic braking were used to calculate the velocity distribution in the continuous casting mold of steel. The results show that the revised k-ε model considering the effect of magnetic field application tends to suppress the production of turbulence and difference between the conventional and revised k-e model is small.

Numerical prediction of inner turbulent flow in conical diffuser by using a new five-point scheme and DLR k-ε turbulence model

The internal turbulent flow in conical diffuser is a very complicated adverse pressure gradient flow.DLR k-ε turbulence model was adopted to study it.The every terms of the Laplace operator in DLR k-ε turbulence model and pressure Poisson equation were discretized by upwind difference scheme.A new full implicit difference scheme of 5-point was constructed by using finite volume method and finite difference method.A large sparse matrix with five diagonals was formed and was stored by three arrays of one dimension in a compressed mode.General iterative methods do not work wel1 with large sparse matrix.With algebraic multigrid method(AMG),linear algebraic system of equations was solved and the precision was set at 10-6.The computation results were compared with the experimental results.The results show that the computation results have a good agreement with the experiment data.The precision of computational results and numerical simulation efficiency are greatly improved.

TWO MODIFICATORY K-ε TURBULENCE MODELS FOR TURBULENT SWIRLING FLOWS

Since the standard K-ε model used to predict the strongly swirling flowleads to a large deviation from experimental results, it is necessary to introduce modification tothe standard K-ε model. Based on the algebraic Reynolds stress model and Bradshaw's turbulentlength scale modification conception, we present two modified K-ε models. To investigate thebehaviour of the modified turbulence models, they are used to predict two representative turbulentswirling flows. The computational results, after compared with the experimental data, show that themodified K-ε models substantially improve the prediction of the standard K-ε model for theturbulent swirling flows.

A k-ε Turbulence Model Considering Compressibility in Three-Dimensional Transonic Turbulent Flow Calculation

Based on the standard k-ε turbulence model, a new compressible k-ε model considering the pressure expansion influence due to the compressibility of fluid is developed and applied to the simulation of 3D transonic turbulent flows in a nozzle and a cascade. The Reynolds avenged N-S equations in generalized curvilinear coordinates are solved with implementation of the new model. The high resolution TVD scheme is used to discretize the convective terms. The numerical results show that the compressible k-ε model behaves well in the simulation of transonic internal turbulent flows.

A K-εTWO-EQUATION TURBULENCE MODEL FOR THE SOLID-LIQUID TWO-PHASE FLOWS

A two-equation turbulence model has been dereloped for predicting two-phase flow the two equations describe the conserration of turbulence kinetic energy and dissipation rate of that energy for the incompressible carrier fluid in a two-phase flow The continuity, the momentum, K and εequations are modeled. In this model,the solid-liquid slip veloeites, the particle-particte interactions and the interactions between two phases are considered,The sandy water pipe turbulent flows are sueeessfuly predicted by this turbulince model.

Antisymmetric quadrupole mode of coherent structures in wall-bounded turbulence

Abstract Experiments were conducted in a water tunnel by tomographic time-resolved particle image velocimetry （Tomo-TRPIV）. The Reynolds number Reo is 2 460 on the base of momentum thickness. According to the physical mechanism of the stretch and compression of multi-scale vortex structures in the wall-bounded turbulence, the topological characteristics of turbulence statistics in logarithmic layer were illustrated by local-averaged velocity structure function. During coherent structures bursting, results reveal that the topological structures of velocity gradients, velocity strain rates and vorticities behave as antisymmetric quadrupole modes. A three-layer antisymmetric quadrupole vortex packet confirms that there is a tight relationship between the outer layer and the near-wall layer.

Gyro-Landau-fluid simulations of impurity effects on ion temperature gradient driven turbulence transport

The effects of impurities on ion temperature gradient(ITG)driven turbulence transport in tokamak core plasmas are investigated numerically via global simulations of microturbulence with carbon impurities and adiabatic electrons.The simulations use an extended fluid code(ExFC)based on a four-field gyro-Landau-fluid(GLF)model.The multispecies form of the normalized GLF equations is presented,which guarantees the self-consistent evolution of both bulk ions and impurities.With parametric profiles of the cyclone base case,well-benchmarked ExFC is employed to perform simulations focusing on different impurity density profiles.For a fixed temperature profile,it is found that the turbulent heat diffusivity of bulk ions in a quasi-steady state is usually lower than that without impurities,which is contrary to the linear and quasilinear predictions.The evolutions of the temperature gradient and heat diffusivity exhibit a fast relaxation process,indicating that the destabilization of the outwardly peaked impurity profile is a transient state response.Furthermore,the impurity effects from different profiles can obviously influence the nonlinear critical temperature gradient,which is likely to be dominated by linear effects.These results suggest that the improvement in plasma confinement could be attributed to the impurities,most likely through adjusting both heat diffusivity and the critical temperature gradient.

Theoretical analysis of the optical rotational Doppler effect under atmospheric turbulence by mode decomposition

The optical rotational Doppler effect associated with orbital angular momentum provides a new means for rotational velocity detection.In this paper,we investigate the influence of atmospheric turbulence on the rotational Doppler effect.First,we deduce the generalized formula of the rotational Doppler shift in atmospheric turbulence by mode decomposition.It is found that the rotational Doppler signal frequency spectrum will be broadened,and the bandwidth is related to the turbulence intensity.In addition,as the propagation distance increases,the bandwidth also increases.And when C_(n)^(2)≤5×10^(-15)m^(-2/3)and 2z≤2 km,the rotational Doppler signal frequency spectrum width d and the spiral spectrum width d_(0)satisfy the relationship d=2d_(0-1).Finally,we analyze the influence of mode crosstalk on the rotational Doppler effect,and the results show that it destroys the symmetrical distribution of the rotational Doppler spectrum about 2l·Ω/2π.This theoretical model enables us to better understand the generation of the rotational Doppler frequency and may help us better analyze the influence of the complex atmospheric environment on the rotational Doppler frequency.

Heat Transfer and Flow Characteristics Predictions with a Refined k-ε-f_u Turbulent Model in Impinging Jet

Local heat transfer and flow characteristics in a round turbulent impinging jet for Re≈23 000 is predicted numerically with the RANS approach and a k-ε-fu turbulence model. The heat transfer predictions and turbulence parameters are verified against the axis-symmetric free jet impingement measurements and compared with previous other turbulence models, and results show the k-ε-fu model has a good performance in predictions of the local wall heat transfer coefficient, and in agreement with measurements in mean velocity profiles at different radial positions as well. The numerical model is further used to examine the effect of the fully confined impingement jet on the local Nusselt number. Local Nusselt profiles in x and y-centerlines for the target plate over three separation distances are predicted. Compared with the experimental data, the numerical results are accurate in the central domain around the stagnation region and present a consistent structure distribution.

Diffraction deep neural network based orbital angular momentum mode recognition scheme in oceanic turbulence

Orbital angular momentum(OAM)has the characteristics of mutual orthogonality between modes,and has been applied to underwater wireless optical communication(UWOC)systems to increase the channel capacity.In this work,we propose a diffractive deep neural network(DDNN)based OAM mode recognition scheme,where the DDNN is trained to capture the features of the intensity distribution of the OAM modes and output the corresponding azimuthal indices and radial indices.The results show that the proposed scheme can recognize the azimuthal indices and radial indices of the OAM modes accurately and quickly.In addition,the proposed scheme can resist weak oceanic turbulence(OT),and exhibit excellent ability to recognize OAM modes in a strong OT environment.The DDNN-based OAM mode recognition scheme has potential applications in UWOC systems.

Numerical research on flow and thermal transport in cooling pool of electrical power station using three depth-averaged turbulence models

This paper describes a numerical simulation of thermal discharge in the cooling pool of an electrical power station, aiming to develop general-purpose computational programs for grid generation and flow/pollutant transport in the complex domains of natural and artificial waterways. Three depth-averaged two-equation closure turbulence models, k-ε, k- w, and k- w, were used to close the quasi three-dimensional hydrodynamic model. The k- w model was recently established by the authors and is still in the testing process. The general-purpose computational programs and turbulence models will be involved in a software that is under development. The SIMPLE （Semi-Implicit Method for Pressure-Linked Equation） algorithm and multi-grid iterative method are used to solve the hydrodynamic fundamental governing equations, which are discretized on non-orthogonal boundary-fitted grids with a variable collocated arrangement. The results calculated with the three turbulence models were compared with one another. In addition to the steady flow and thermal transport simulation, the unsteady process of waste heat inpouring and development in the cooling pool was also investigated.

Effects of Strong Turbulence on the Spiral Plane Mode of Whittaker-Gaussian Beam through Terrene-Atmosphere

The analytic formulae of probability distribution of spiral plane modes for the Whittaker-Gaussian （WG） beams with orbital angular momentum （OAM） in strong turbulence regime are modeled based on the modified Rytov approximation. Numerical results show that the erosstalk range of OAM modes in the vicinity of signal mode increases with the increasing refractive-index construction parameter. However, effects of change of the width of the Gaussian envelope and the parameter Wo of WG beams on normalization energy weight of signal mode can be ignored. We find theoretically that signal spiral plane mode of WG beams at each OAM level approximatively has the same normalization energy weight, implying that the channels with WG （pseudo non-diffraction） beam have higher channel capacity than the channels with the Laguerre-Gaussian beam.

Multi-scale interaction between tearing modes and micro-turbulence in the HL-2A plasmas

The influence of m/n=2/1(m and n are poloidal and toroidal mode numbers)tearing modes on plasma perpendicular flows and micro-fluctuations has been investigated in HL-2A neutral beam injection heated L-mode plasmas.It is found that the local perpendicular rotation velocity and turbulence energy are modulated by the alternation between the island X-point and O-point of the naturally rotating tearing modes.Cross-correlation analysis indicates that the modulation of density fluctuations by the tearing mode is not only limited to the island region,but also occurs in the edge region near the last closed flux surface.The turbulence exhibits distinct spectral characteristics inside and outside the island region.In addition,it is observed that the particle flux near the strike point is also significantly impacted by the tearing modes.The experimental evidence reveals that there are strong core-edge interactions between the core tearing modes and the edge transport.

CURVAURE SENSITIVE NONLINEAR TURBULENCE MODEL

By modifying the Rodi assumption to take account of the influence of flow curvature, a new curvature modified algebraic stress model(CMASM) is de- veloped from the second moment closure in the generalized curvilinear coordinate system. And the explicit form of this ASM, a new curvature modified nonlinear k-ε model (CMNKE), is derived in the orthogonal curvilinear coordinate system. This new nonlinear k-ε model is further validated by a numerical simulation of a two- dimensional U-type turnaround duct flow. The results show that the CMNKE can effectively capture the main characteristic of this curvature flow and simulate the damping effect of the shear stress by a convex curvature and the enhancing effect by a concave curvature. So, this model is a rational and effective simplification to the second moment closure.

Simulation Analysis of New Energy Vehicle Engine Cooling System Based on K-E Turbulent Flow Mathematical Model

New energy vehicles have better clean and environmental protection characteristics than traditional fuel vehicles.The new energy engine cooling technology is critical in the design of new energy vehicles.This paper used oneand three-way joint simulation methods to simulate the refrigeration system of new energy vehicles.Firstly,a k-εturbulent flow model for the cooling pump flow field is established based on the principle of computational fluid dynamics.Then,the CFD commercial fluid analysis software FLUENT is used to simulate the flow field of the cooling pump under different inlet flow conditions.This paper proposes an optimization scheme for new energy vehicle engines’“boiling”phenomenon under high temperatures and long-time climbing conditions.The simulation results show that changing the radiator’s structure and adjusting the thermostat’s parameters can solve the problem of a“boiling pot.”The optimized new energy vehicle engine can maintain a better operating temperature range.The algorithm model can reference each cryogenic system component hardware selection and control strategy in the new energy vehicle’s engine.

Solution of Self-similar Equations of the k-ε Model in the Shear Turbulent Mixing Problem and Its Numerical Simulation

The paper presents the k-ε model equations of turbulence with a single set of constants chosen by the authors, which is appropriate to simulate a wide range of turbulent flows. The model validation has been performed for a number of flows and its main results are given in the paper. The turbulent mixing of flow with shear in the tangential velocity component is discussed in details. An analytical solution to the system of ordinary differential equations of the k-ε model of turbulent mixing has been found for the self-similar regime of flow. The model coefficients were chosen using simulation results for some simplest turbulent flows. The solution can be used for the verification of codes. The numerical simulation of the problem has been performed by the 2D code EGAK using this model. A good agreement of the numerical simulation results with the self-similar solution, 3D DNS results and known experimental data has been achieved. This allows stating that the k-ε model constants chosen by the authors are acceptable for the considered flow.

Assessment of k–ε models using tetrahedral grids to describe the turbulent flow field of a PBT impeller and validation through the PIV technique

In turbulence modeling, the RNG and Realizable models have important improvements in the turbulent production and dissipation terms in comparison to the Standard. The selection of the appropriate turbulence model has an impact on the convergence and solution in STRs, and they are used in mixing, multiphase modeling or as starting solution of transient models as DES and LES. Although there are several studies with the pitched blade turbine(PBT) impeller, most of them used the Standard model as representative of all k–ε models, using structured hexahedral grids composed of low number of cells, and in some cases under axial symmetry assumptions.Accordingly, in this work the assessment of the Standard, RNG and Realizable models to describe the turbulent flow field of this impeller, using the Multiple Reference Frame(MRF) and Sliding Mesh(SM) approaches with tetrahedral domains in dense grids, is presented. This kind of cell elements is especially suitable to reproduce complex geometries. Flow velocities and turbulent parameters were verified experimentally by PIV and torque measurements. The three models were capable of predicting fairly the pumping number, the power number based on torque, and velocities. Although the RNG improved the predictions of the turbulent kinetic energy and dissipation rate, the Realizable model presented better performance for both approaches. All models failed in the prediction of the total dissipation rate, and a dependence of its value on the number of cells for the MRF was found.

Laminar-to-Turbulence Transition Revealed Through a Reynolds Number Equivalence

Flow transition from laminar to turbulent mode (and vice versa)—that is, the initiation of turbulence—is one of the most important research subjects in the history of engineering. Even for pipe flow, predicting the onset of turbulence requires sophisticated instrumentation and/or direct numerical simulation, based on observing the instantaneous flow structure formation and evolution. In this work, a local Reynolds number equivalence c (ratio of local inertia effect to viscous effect) is seen to conform to the Universal Law of the Wall, where c = 1 represents a quantitative balance between the abovementioned two effects. This coincides with the wall layer thickness (y+= 1, where y+ is the dimensionless distance from the wall surface defined in the Universal Law of the Wall). It is found that the characteristic of how the local derivative of c against the local velocity changes with increasing velocity determines the onset of turbulence. For pipe flow, c - 25, and for plate flow, c - 151.5. These findings suggest that a certain combination of c and velocity (nonlinearity) can qualify the source of turbulence (i.e., generate turbulent energy). Similarly, a re-evaluation of the previous findings reveals that only the geometrically narrow domain can act locally as the source of turbulence, with the rest of the flow field largely being left for transporting and dissipating. This understanding will have an impact on the future large-scale modeling of turbulence.

Three-dimensional turbulent model of heat transfer and fluid flow in GTAW process

A two-equation K-ε turbulent fluid flow model is built to model the heat transfer and fluid flow in gas tungsten arc welding （GTAW） process of stainless steel S US310 and S US316. This model combines the buoyancy force, lorentz force and marangni force as the driving forces of thefluidflow in the weld pool. The material properties are functions of temperature in this model. The simulated results show that the molten metal flowing outward is mainly caused by the marangoni convection, which makes the weld pool become wider and shallower. The comparison of the weld pool shape of SUS310 and SUS316 shows that the slight differences of the value of thermal conductivity mainly attributes to the difference of the weld pool shape and the distinction of heat transport in laminar and turbulent model makes large diversity in the simulated results.

Observation of Pedestal Plasma Turbulence on EAST Tokamak

Pedestal plasma turbulence was experimentally studied by microwave reflectometry on EAST tokamak. The characteristics of edge pedestal turbulence during dithering L-H transition, ELM-free H-mode phase and inter-ELM phase have recently been studied on EAST. An edge spatial structure of density fluctuation and its dithering temporal evolution is observed for the first time on the EAST tokamak during the L-H transition phase. A coherent mode usually appears during the ELM-free phase prior to the first ELM on EAST tokamak. The mode frequency gradually decreases as the pedestal evolves. Analysis shows that the coherent mode is in the pedestal region inside the separatrix. In plasma with type-III ELMs, a precursor mode before ELM is usually observed. The frequency of the precursor was initially about 150 kHz and gradually decreased till the next ELM. The mode amplitude increases or shows saturation before ELM. In the plasma with compound ELMs composed of high and low frequency ELMs, the precursor was also observed before the high frequency ELM while the harmonic oscillations with frequencies of 20 kHz, 40 kHz and 60 kHz appear before the low frequency ELM.