Surface Geophysical Methods used to Verify the Karst Geological Structure in the Built-up Area:A Case Study of Specific Engineering-Geological Conditions

This article presents a research study of complex limestone karst engineering-geological conditions in the municipality Valaskanear Banska Bystrica in Slovakia.The aim of the study is to demonstrate the impossibility of spatial identification of cave spaces using surface geophysical methods due to the specific engineering-geological conditions of a thick surface layer of anthropogenic fill containing highly heterogeneous anthropogenic material.Its maximum thickness is 3 m.Another specificific condition of the study area is its location in the built-up area,due to which the applicability of geophysical methods was limited.The article contains methodological recommendations to be used in analogous geological conditions with karst structures topped with anthropogenic fill,which complicates the identification of cave spaces.The recommended solution herein is the identification of the cave system using underground mapping of the karst and its projection onto the surface for which surface geophysical methods have been combined.

Research on in situ stress inversion of deep-buried tunnel based on pressure/tension axis mechanism and geological structure

The investigation of the in situ stress distribution has always been a key condition for engineering design of deep tunnels and analysis of surrounding rock stability.In this paper,a comprehensive judgment method coupled with pressure/tension(P/T)axis mechanism and geological structure is proposed to invert the in situ stress in the Duoxiongla tunnel in Tibet.In the process of TBM tunnel excavation,3887 groups of microseismic events were collected by means of microseismic monitoring technology.By studying the temporal and spatial distribution of 3887 groups of microseismic events,42 groups of microseismic data were selected for in situ stress inversion.Then the focal mechanisms of 42 groups of microseisms were inverted.Combined with the analysis of the previous geological survey,the inversion results of the in situ stress were analyzed.According to the focal mechanism of the tunnel area,the linear in situ stress inversion method was used to invert the in situ stress in the source area.Finally,according to the PTGS(pressure/tension axis mechanism and geological structure)comprehensive judgment method proposed in this paper,the in situ stress of the tunnel microseismic region was determined.The results show that there are mainly three groups of fissures and joint surfaces in the tunnel area,and the in situ stress is dominated by the horizontrun tectonic stress;the main driving force of the rupture surface in the excavation process of Duoxiongla tunnel is the horizontal tectonic stress;the distribution of the maximum and minimum principal stress obtained by the inversion is consistent with the distribution of the P/T axis;combined with the linear in situ stress inversion method and the comprehensive judgment of PTGS,the azimuth and dip angles of the three principal stresses are finally determined as N90.71°E,4.06°,N5.35°W,3.06°,and N8.10W,85.32°,respectively.The study verifies the feasibility of microseismic inversion of in situ stress.

Application of geophysical methods in fine detection of urban concealed karst:A case study of Wuhan City,China

The construction of modern livable cities faces challenges in karst areas,including ground collapse and engineering problems.Wuhan,with a population of 13.74×10^(6) and approximately 1161 km^(2)of soluble rocks in the urban area of 8569.15 km^(2),predominantly consists of concealed karst areas where occasional ground collapse events occur,posing significant threats to underground engineering projects.To address these challenges,a comprehensive geological survey was conducted in Wuhan,focusing on major karstrelated issues.Geophysical methods offer advantages over drilling in detecting concealed karst areas due to their efficiency,non-destructiveness,and flexibility.This paper reviewed the karst geological characteristics in Wuhan and the geophysical exploration methods for karst,selected eight effective geophysical methods for field experimentation,evaluated their suitability,and proposed method combinations for different karst scenarios.The results show that different geophysical methods have varying applicability for karst detection in Wuhan,and combining multiple methods enhances detection effectiveness.The specific recommendations for method combinations provided in this study serve as a valuable reference for karst detection in Wuhan.

Differential structure of Ordovician karst zone and hydrocarbon enrichment in paleogeomorphic units in Tahe area,Tarim Basin,NW China

Based on a large number of drilling,logging,seismic and production data,the differential structures of karst zone and hydrocarbon distribution in different paleogeomorphic units of the Tahe area,Tarim Basin,are discussed by analyzing the karst drainages and flowing channels.The karst paleogeomorphy of Ordovician in Tahe area is composed of watershed,karst valley and karst basin.The watershed has epikarst zone of 57.8 m thick on average and vadose karst zone of 115.2 m thick on average with dense faults,fractures and medium-small fracture-caves,and 76.5%of wells in this area have cumulative production of more than 5×10^(4) t per well.The karst valleys have epikarst zone,vadose karst zone and runoff karst zone,with an average thickness of 14.6,26.4 and 132.6 m respectively.In the runoff karst zone,the caves of subsurface river are mostly filled by fine sediment,with a filling rate up to 86.8%,and 84.9%of wells in this area have cumulative production of less than 2×10^(4) t per well.The karst basin has no karst zone,but only fault-karst reservoirs in local fault zones,which are up to 600 m thick and closely developed within 1 km around faults.Different karst landforms have different water flowing pattern,forming different karst zone structures and resulting in differential distribution of oil and gas.The watershed has been on the direction of oil and gas migration,so medium-small sized connected fracture-caves in this area have high filling degree of oil and gas,and most wells in this area have high production.Most caves in subsurface river are filled due to strong sedimentation and transportation of the river,so the subsurface river sediment has low hydrocarbon abundance and more low production oil wells.The faults linking source rock are not only the water channels but also the oil-gas migration pathways,where the karst fractures and caves provide huge reservoir space for oil and gas accumulation.

Relationship between Geological Structures and Hydrocarbon Enrichment of Different Depressions in the Bohai Bay Basin

The Bohai Bay Basin contains many depressions with varying degrees of hydrocarbon enrichment associated with the geological structures of different depressions. This study discussed the relationship between the geological structures and hydrocarbon enrichment of the depressions in the Bohai Bay Basin. Based on the Paleogene strata distribution and the length to width ratio of different depressions, their geological structures are divided into three types in plan-view： open（length/width 〈 2）, narrow（length/width 〉 4） and transitional types（length/width 2-4）. In cross section, the geological structures can be divided into dustpan I, dustpan II and double-faulted types. Based on tectonic evolution and sedimentary characteristics, the depressions are classified into early-formed, inherited and late-formed categories. Generally, narrow depressions are mainly located in the northeast and southwest of the Bohai Bay Basin, while open depressions are dominantly distributed in the central area of the basin; late-formed depressions are mainly around the Bohai sea area, and early-formed depressions are mostly located in the periphery of the basin. Geological structures of the depressions control the formation of the source, reservoir and cap rocks as well as hydrocarbon accumulation setting, and further influence the pay zones and oil-bearing sequence. In detail, dustpan II and doublefaulted depressions mainly have A-type sags, which often possess better hydrocarbon generation conditions than dustpan I ones; hydrocarbons in open dustpan II depressions tend to accumulate in the central uplift areas or buried hill, while those in narrow dustpan I depressions always accumulate in gentle slope belts. The oil-bearing sequence for different evolutional depressions corresponds well with the sedimentary strata of the main development stages of depressions. In early-formed depressions, hydrocarbons are mainly enriched in deeply buried reservoirs, while in late-formed depressions hydrocarbons are abundant in the relatively shallow traps. In summary, most inherited and late-formed dustpan II depressions are enriched in hydrocarbons due to their extensive source rocks and good source-reservoir-seal assemblages, whereas dustpan I and early-formed depressions are relatively poor in hydrocarbons.

Framework system and research flow of uncertainty in 3D geological structure models

Uncertainty in 3D geological structure models has become a bottleneck that restricts the development and application of 3D geological modeling.In order to solve this problem during periods of accuracy assessment,error detection and dynamic correction in 3D geological structure models,we have reviewed the current situation and development trends in 3D geological modeling.The main context of uncertainty in 3D geological structure models is discussed.Major research issues and a general framework system of uncertainty in 3D geological structure models are proposed.We have described in detail the integration of development practices of 3D geological modeling systems,as well as the implementation process for uncertainty evaluation in 3D geological structure models.This study has laid the basis to build theoretical and methodological systems for accuracy assessment and error correction in 3D geological models and can assist in improving 3D modeling techniques under complex geological conditions.

Geological structures of ridges with relation to the definition of three types of seafloor highs stipulated in Article 76

The ridge like seafloor highs with various geological origins can be classed into mid-ocean ridges,transverse ridges related to transform faults,hot spot/mantle plume originated ridges,microcontinent rifted from major continent,intra-plate arc formed by interaction of two oceanic plates,and tectonic ridges uplifted by later tectonic activity.Those ridges moved towards the convergent continental margins along with the underlain plate drifting and formed so-called accreted ridges commonly trending at a high angle to the continental margins.At divergent continental margins,the continental crusts were extended and thinned accompanying with magmatism,which formed high terrains protruding or parallel to the coastal line.The ridges worldwide have various origins and the crustal thicknesses and structures of them are diversity.The crusts beneath the microcontinents,and the transverse ridges along the transform margin,and the seafloor highs beside the passive continental margins are continental,while the crusts of other ridges are oceanic.Article 76 of the United Nations Convention on the Law of the Sea （UNCLOS） has classed the seafloor highs worldwide into three legal categories,namely oceanic ridges,submarine ridges and submarine elevations,for the purpose to delineate the outer limit of the coastal States＇ continental shelf beyond 200 nautical miles.To define the categories of the legal seafloor highs to which the ridges with various geological origins belong,the continuities in morphology and geology including the rock types,crustal structures,origins and tectonic setting of the ridges and the coastal States＇ land mass with its submerged prolongation should be taken into account.If a ridge is continuous both in morphology and geology with the coastal States＇ land mass and its submerged prolongation,it is a submarine elevation stipulated in Article 76.If it is discontinuous in morphology,the ridge should be regarded as oceanic ridges.If a ridge is continuous in morphology but discontinuous in geology with the coastal States＇ land mass and its submerged prolongation,then it is a submarine ridge as stipulated in Article 76.

Hydrogeological Characteristics of a Karst Mountainous Catchment in the Northwest of Vietnam

This paper presents a preliminary assessment of the hydrogeological characteristics of a karst mountainous catchment, the Suoi Muoi River catchment, in the northwest of Vietnam. The catchment is located at 600–700 m a.s.l. and covers an area of 284 km. Exposed limestone occupies 32% of the total catchment area. Various types of assessments have been carried out, including geological and hydrogeological field surveys, cave surveys, dye-tracer tests, meteorological and surface water monitoring. Geological studies and cave surveys have identified the most important active cave/conduit systems within the catchment. Although these data are essential, they are insufficient to make a comprehensive appraisal of the hydrologic nature of the catchment under interest. An attempt was made to calculate a global water balance of the catchment, based on short-term (15 months) meteorological and streamflow records. The results show that, despite the existence of a number of substantial cavern conduit systems, the groundwater system of the catchment is governed by the fracture/fissure matrix. The cavern conduit systems only collect groundwater from the adjacent fracture matrix and/or connect topographically isolated surface watercourses. The groundwater storage of the cavern conduit systems appears to be regionally insignificant in comparison with the governed fracture matrix groundwater system.

The geological structure background and the crustal structure in the northeastern margin of the Qinghai-Tibetan plateau

The geological structure background, the crustal structure and the shape of Moho in the northeastern margin of the Qinghai-Tibetan plateau are studied. Based on artificial seismic sounding profile as well as geological data. The main results are summarized as follows: (1) The geotectonic subdivisions and the characteristics of main deep and large faults in the northeastern margin of the Qinghai-Tibetan plateau are presented; (2) The general features of the Moho are obtained mainly based on artificial seismic sounding data; (3) There exists well corresponding relation between surface faults and some features of the Moho, which suggests that such complex crustal structure might be the preparation environment of strong earthquakes.

Landscape structures of different rural landscape connectivity in typical plateau karst regions: Taking the Houzhai River area of Anshun City, Guizhou Province as an example

Landscape connectivity is important for energy and material flow in ecosystems as well as for the survival of species. The landscape structure influences and reflects the degree of landscape connectivity. In order to study the coupling relationship between landscape structure and connectivity and reveal the succession relationship between its structure and connectivity in the typical karst plateau area. The study analyzed the typical area of Houzhai River in Puding County, Anshun City, Guizhou Province, according to the landscape pattern index and probability landscape connectivity index. The results show:(1) The landscape structure of the study area A is mainly characterized by large patches and uniform distribution. The main land is woodland and cultivated land, and the overall landscape is low fragmentation.(2) The landscape structure of the study area B is mainly characterized by the clustering of a certain type of land cover and the uneven distribution of the patches, for example, cultivated land. Other types of patches are scatteredly distributed, and the overall landscape is highly fragmented.(3) The study area A, B in 100, 500, 1000, 2000, 3000, 5 distance thresholds of landscape connectivity were 1.55, 1.99, 2.26, 2.49, 2.58 and 0.02, 0.10, 0.15, 0.19, 0.20, respectively. The average landscape connectivity is 2. 18 and 0. 13, respectively. Study Area A has a higher degree of landscape connectivity than B. Landscape pattern indicators can represent the landscape structure and probability landscape connectivity index calculates the landscape connectivity in the study area. The results of the study can provide a basis for ecological restoration of plateau karst regions and well-oriented rural development planning.

RESEARCH ON THE SPATIAL STRUCTURE OF KARST MASSIF——Taking the Basin of the Houzhai Subterranean Stream in Puding Country for Example

Ｉ．ＩＮＴＲＯＤＵＣＴＩＯＮＵｐｔｏｔｈｅｐｒｅｓｅｎｔ，ｓｅｖｅｒａｌｔｈｅｏｒｅｔｉｃａｌａｎｄｉｍｐｏｒｔａｎｔｐｒａｃｔｉｃａｌｐｒｏｂｌｅｍｓｈａｖｅｂｅｅｎｓｏｌｖｅｄｉｎｋａｒｓｔｇｅｏｍｏｒｐｈｏｌｏｇｙ．Ｈｏｗｅｖｅｒ，ａｌｏｎｇｗ...

Engineering-Geological Problems in the Moravian Karst,Czech Republic

The Moravian karst belongs to one of the famous karst regions in Central Europe. It is situated in Moravia in the eastern part of the Czech Republic. According to the geology it is of Devonian age and the main rocks are of different types of limestones. The process of karstification is still active. They are many caves with rich stalagmites and stalactites and the Macocha abyss, the depth of which is 138.5 m. The underground Punkva River flows through the main part of the karst, forming beautiful underground lakes. Typical karst phenomena, such as sinkholes and deep canyons, may be observed on the surface of the terrain. Because of the karstification, water erosion and frost weathering, many steep unstable slopes and walls originated. To solve the stability from a geotechnical point of view is not easy. This requests a special engineering-geological knowledge and experience.

Investigation on the Concurrent-Business Behavior of Peasant Households during the Planting Structure Adjustment in Karst Mountainous Area

Based on the survey data of 150 peasant households in typical Karst mountainous area in the year 2009, causations, characteristics and influence factors of the concurrent-business behavior of peasant households during planting structure adjustment are analyzed. Result shows that there is significant positive correlation between the concurrent-business income and the household income of farmers. And the concurrent-business behavior has the tendency to be popular among the young farmers with the characteristics of relative concentration, strong will of farmers and the significant impact of education degree on the concurrent-business income. Information, capital, skill, and market awareness are the main factors affecting the concurrent-business behavior of peasant households. Countermeasures to optimize the concurrent-business behavior of peasant households are put forward, such as strengthening the skills training for farmers to improve the cultural quality of peasant households, establishing modern rural financial service system to offer capital support for the development of peasant households, setting up information base of rural labor force to provide more information and channels for the concurrent-business behavior of peasant households, and enhancing the cultivation of farmers' market awareness to improve their ability to adapt to market economy.

Geological structure and dynamic mechanism of the Termit rift basin in West African rift system

Based on seismic and drilling data in the study area,the geological structure and kinematic process of the Termit rift basin were studied using seismic profile interpretation and balanced restoration to find out the dynamic mechanism of the basin.(1)The geological structure of the Termit Basin is represented as a narrow rift basin,with development of series of structural styles in extensional,extensional strike-slip and compressional stress setting.On plane,it is narrow in the north and wide in the south,and transitions from graben to half-graben from north to south;it features a graben controlled by the boundary faults in the north and a fault-overlapped half-graben in the south.(2)Before the Cretaceous,a series of hidden faults developed in the West African rift system,which laid the foundation for the development location and distribution direction of the Termit Basin;during the Cretaceous to Paleogene periods,the basin experienced two phases of rifting in Early Cretaceous and Paleogene,which controlled the initial structure and current structural shape of the basin respectively;during the Neogene to Quaternary,the basin was subjected to weak transformation.(3)In the Precambrian,the Pan-African movement gave rise to a narrow and long weak zone within the African plate,which provided the pre-existing structural conditions for the formation of the Termit Basin.In the Early Cretaceous,affected by the South Atlantic rifting,the Pan African weak zone was reactivated,resulting in the first stage of rifting and the basic structural framework of the Termit Basin.In the Paleogene,affected by the subduction and convergence of the Neo-Tethys Ocean,the African-Arabian plate extended in near E-W trending,and the Termit Basin experienced the second stage of rifting.The oblique extension in this period caused intense structural differentiation,and the current structural pattern of alternate uplifts and depressions took shape gradually.

Geological structures and potential petroleum exploration areas in the southwestern Sichuan fold-thrust belt, SW China

Based on the latest geological,seismic,drilling and outcrop data,we studied the geological structure,tectonic evolution history and deformation process of the southwestern Sichuan fold-thrust belt to find out the potential hydrocarbon exploration areas in deep layers.During key tectonic periods,the southwestern Sichuan fold-thrust belt developed some characteristic strata and structural deformation features,including the Pre-Sinian multi-row N-S strike rifts,step-shaped platform-margin structures of Sinian Dengying Formation,the western paleo-uplift in the early stage of Late Paleozoic,the Late Paleozoic–Middle Triassic carbonate platform,foreland slope and forebulge during Late Triassic to Cretaceous,and Cenozoic multi-strike rejuvenated fold-thrusting structures.The fold-thrust belt vertically shows a double-layer structural deformation controlled by the salt layer in the Middle Triassic Leikoupo Formation and the base detachment layer at present.The upper deformation layer develops the NE-SW strike thrusts propagating toward basin in long distance,while the deeper deformation layer had near north-south strike basement-involved folds,which deformed the detachment and thrusting structures formed earlier in the upper layer,with the deformation strength high in south part and weak in north part.The southern part of the fold-thrust belt is characterized by basement-involved fold-thrusts formed late,while the central-northern part is dominated by thin-skin thrusts in the shallow layer.The Wuzhongshan anticlinal belt near piedmont is characterized by over-thrust structure above the salt detachment,where the upper over-thrusting nappe consists of a complicated fold core and front limb of a fault-bend fold,while the deep layer has stable subtle in-situ structures.Favorable exploration strata and areas have been identified both in the upper and deeper deformation layers separated by regional salt detachment,wherein multiple anticlinal structures are targets for exploration.Other potential exploration strata and areas in southwestern Sichuan fold-thrust belt include the deep Sinian and Permian in the Wuzhongshan structure,pre-Sinian rifting sequences and related structures,platform-margin belt of Sinian Dengying Formation,and Indosinian paleo-uplift in the east of the Longquanshan structure.

Construction of Subsurface Geological Structures Using a Drilling Database: A Case Study for an Intra-Arc Basin, the Osaka Plain, Southwest Japan

Subsurface geological cross sections of 0 - 200 m depth were constructed using a dense drilling database of the Osaka Plain in the intra-arc Osaka Basin of the Japan island arc, an active plate margin. The cross sections revealed the subsurface geological structures and the geometry of folding and faulting in the basin. The comparison between the constructed subsurface cross sections and the seismic sections of the basement and basin fills at a depth of 1500 - 2000 m showed that the basement and shallow subsurface structures are similar;however, the shallow cross sections were of higher resolution than the deep seismic profiles.

Interpretation of Geological Structures Hosting Potential Gold Deposits in the Konongo Gold Mine Using Airborne Magnetic, Electromagnetic and Radiometric Datasets

The renewed interest in the reactivation of the defunct National Konongo Gold Mine located in the Ashanti Greenstone Belt, calls for a further probe into its geology and the associated mineral hosting structures to discover its mineralization potential. In order to achieve this, airborne magnetic, radiometric and electromagnetic datasets were interpreted to determine the potential gold hosting features in the studied area. The results show the area to consist of the metasediment, the metavolcanic, Tartwaian Formation and their associated granitoids. Results also show that the Tarkwaian sediments, observed largely in the north-eastern side of the site;widen out substantially and truncate in the south. The analysis of the structure lineaments using a rose diagram reveals three main tectonic structures trending in N-S, NNW-SSE, and third the structure trending in the NNE-SSW to NE-SW directions in the area. The dominant structures in the area, form 90% of all the delineated structures and trend in the NE-SW and NNE-SSW direction with the remaining 10% trending in the N-S and NNW-SSE. These structures are associated with the major shear and fracture zones located mainly at the contact between the basin sediments and volcanic belt and also associated with the Tarkwaian Formation. The mapped potential gold mineralization zones located mainly at the contact between the metasediment and the metavolcanic units of the Birimian Supergroup, as well as the Tarkwaian Formation, were mapped by integrating the structures, alteration zones as well as the complex dyke systems. This paper delineates the prominent geological structures with the potential of hosting economic gold mineralization in and around the Konongo Gold Mine.

Research on Geological Structure Mark of Coal and Gas Outbursts in Pingdingshan Mining Area

Based on the study of regional displaying rules of coal and gas outburst controlled by geological structure in Pingdingshan mining area, the geological structure features in outburst sites were investigated emphatically. The combination type, orientation and least seam thickness in outburst sites were put forward. This research provides a geological mark for forecasting gas outbursts in deep mining.

Baiyun Cave in Naigu Shilin,Yunnan Karst,China

The Baiyun cave is a 380 m long karst cave in the Naigu Shilin, situated 70 km southeast of Kunming, Yunnan Province, China. The prevailing orientations of the cave passages are N110°–120°E and N0°-10°W and those of the fissures in the cave are N30°–40°W and N20°–30°W. The cave is developed in the thick-bedded Lower Permian Qixia Formation. The cave has an active water flow and is currently at the near water-table stage. There are large amounts of different infills of cave sediments. The cave shows different stages of paragenesis. The palaeomagnetic analysis of cave sediments shows that their ages are younger than 780 ka B.P. (the Brunhes Chron). The upper part of the sampled profile belongs to the reverse Blake event (112.3–117.9 ka B.P.). The formation of the Baiyun cave is directly connected with the development of the Naigu Shilin. The formation of karst underground and surface features depends on the regional tectonic deformation and the Cenozoic extension of the study area.