Mental disorders such as depression and anxiety inflict significant burdens on individuals and society.Commonly prescribed treatments often involve cognitive therapy and medications.However,for patients resistant to t...Mental disorders such as depression and anxiety inflict significant burdens on individuals and society.Commonly prescribed treatments often involve cognitive therapy and medications.However,for patients resistant to these conventional methods,alternative therapies like the Ketogenic Diet(KD)offer a promising avenue.KD and its key metabolite,β-hydroxybutyrate(BHB),have been hypothesized to alleviate mental disorders through antiinflammatory actions,a crucial pathway in the pathophysiology of depression.This mini-review examines 15 clinical trials exploring the influence of KD and BHB on inflammation and their potential roles in managing mental disorders.Both human and animal studies were scrutinized to elucidate possible cellular and molecular mechanisms.Out of the 15 trials,10 reported reduced levels of at least one inflammatory mediator or mRNA post KD or BHB treatment,while two observed an elevation in anti-inflammatory agents.These findings suggest that KD and BHB could modulate cellular inflammatory pathways,highlighting their potential for therapeutic application in mental disorders.展开更多
A new and simple route for the synthesis of α,β-unsaturated ketones via cleavage of the C-C(O)C single bond of monoalkylated β-diketone has been described. The reaction was catalyzed by copper, a cheap transition m...A new and simple route for the synthesis of α,β-unsaturated ketones via cleavage of the C-C(O)C single bond of monoalkylated β-diketone has been described. The reaction was catalyzed by copper, a cheap transition metal in a weakly basic medium (K<sub>3</sub>PO<sub>4</sub>) at room temperature. To carry out this study, we first had to synthesize the monoalkylated β-diketones 1. Afterwards, α,β-unsaturated ketones 2 were obtained with high yields around 80%. Finally, all the products were characterized by 1H NMR, 13C NMR, and HRMS spectra. .展开更多
Di(4-bromophenyl)ketone and various aromatic diamines as the monomers,a series of novel poly(imino ketone)s (PIKs)have been synthesized via palladium-catalyzed aryl amination,which is Hartwig-Buchwald polycondensation...Di(4-bromophenyl)ketone and various aromatic diamines as the monomers,a series of novel poly(imino ketone)s (PIKs)have been synthesized via palladium-catalyzed aryl amination,which is Hartwig-Buchwald polycondensation reaction.The structures of PIKs are characterized by means of elemental analysis,FT-IR,~1H-NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structure.The general properties of PIKs are studied by DSC,TG and wide-angle X-ray diffraction,the solubility behavior is...展开更多
Chloromethylated poly(phthalazinone ether sulfone ketone) (CMPPESK) was prepared from poly(phthalazinone ether sulfone ketone) (PPESK) using chloromethyl octyl ethers (CMOE) with lower toxicity as chlorometh...Chloromethylated poly(phthalazinone ether sulfone ketone) (CMPPESK) was prepared from poly(phthalazinone ether sulfone ketone) (PPESK) using chloromethyl octyl ethers (CMOE) with lower toxicity as chloromethylated regent. CMPPESK was soluble in N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc) and chloroform. Quaternized poly(phthalazinone ether sulfone ketone) (QAPPESK) was prepared from CMPPESK by quaternization. QAPPESK had excellent solvent resistance, which was only partly soluble in sulfuric acid (98%) and swollen in N,N-dimethylformamide (DMF). The vanadium redox flow battery (V-RFB) using QAPPESK anion-exchange membrane had better performance with 88.3% of overall energy efficiency.展开更多
Photo-grafting of hydrophilic monomer was used to enhance the hydrophilicity of poly(ether ether ketone) (PEEK) with the aim of extending its applications to biological fields. PEEK sheets were surface modified by...Photo-grafting of hydrophilic monomer was used to enhance the hydrophilicity of poly(ether ether ketone) (PEEK) with the aim of extending its applications to biological fields. PEEK sheets were surface modified by grafting of acrylamide(AAm) with ultraviolet(UV) irradiation in the presence or absence of benzophenone(BP). The effects of BP, irradiation time and monomer concentration on the surface wettability of PEEK were investigated. Characteriza tion of modified PEEK using scanning electron microscopy(SEM), energy-disperse spectrometer(EDS) and water contact angle measurements shows that AAm was successfully grafted on PEEK surface both in presence and absence of BP. With the increase in irradiation time and monomer concentration, contact angles decrease to as low as 30°, demonstrating a significant improvement of surface hydrophilicity. In agreement with the decrease in contact angle, under identical conditions, the nitrogen concentration increases, suggesting the increase in grafting degree of the grafting polymerization. This investigation demonstrates a self-initiation of PEEK due to its BP-like structure in the backbone of the polymer. Though the graft polymerization proceeds more readily in the presence of BP, the self-initiated graft polymerization is clearly observed.展开更多
A novel series of poly(aryl ether sulfone ketone)s (PPESKs) containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were...A novel series of poly(aryl ether sulfone ketone)s (PPESKs) containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures (Tg) and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction (WAXD).展开更多
UV-induced graft polymerization of acrylic acid(AA) on poly(ether ether ketone)(PEEK) films was carried out to introduce ―COOH for the subsequent immobilization of bovine serum albumin(BSA).BSA was introduced...UV-induced graft polymerization of acrylic acid(AA) on poly(ether ether ketone)(PEEK) films was carried out to introduce ―COOH for the subsequent immobilization of bovine serum albumin(BSA).BSA was introduced on PEEK surface based on the condensation reaction between ―NH 2 and ―COOH.The modified surface(PEEK-BSA) was characterized by energy-disperse spectrometry(EDS),X-ray photoelectron spectroscopy(XPS),water contact angle measurement and UV spectrum analysis.The contact angle was found to decrease from 104° for the virgin PEEK films to 63° for the BSA-immobilized PEEK films,demonstrating a significant improvement of surface hydrophilicity.Moreover,the appearance of nitrogen on PEEK film confirmed by XPS and EDS indicates the immobilization of BSA on PEEK surface.展开更多
Trimethoxysilyl-functionalized PPEK(PKGS) films had been designed to serve as wear resistant coatings for silicon surfaces. These surface films were formed by a dip-coating technique applied to self-assembled monola...Trimethoxysilyl-functionalized PPEK(PKGS) films had been designed to serve as wear resistant coatings for silicon surfaces. These surface films were formed by a dip-coating technique applied to self-assembled monolayers(SAMs).The formation and wetting behavior of PKGS films were characterized by means of contact angle measurement.The friction coefficient of the film prepared is very low(about 0.1),and the anti-wear behavior is good,with a lack of failure after sliding over 1800 s.展开更多
A phosphrous-containing poly(aryl ether ketone) was synthesized derived from bisphenol-A and bis[4-(4- fluorobenzoyl)phenyl] phenyl phosphine oxide (FPPPO) by nucleophilic substitution reaction. The structure of...A phosphrous-containing poly(aryl ether ketone) was synthesized derived from bisphenol-A and bis[4-(4- fluorobenzoyl)phenyl] phenyl phosphine oxide (FPPPO) by nucleophilic substitution reaction. The structure of the polymer was characterized by FT-IR, ^1H-NMR and ^31p-NMR. The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature (Tg) of the polymer was 205℃, and the 5% weight loss temperature under nitrogen was 475℃. Good solubility of the polymer in organic solvents, such as N-methylpyrrolidone, dimethylformamide, dimethylacetamide, dimethylsulfoxide and chloroalkanes was observed, flexible film was obtained from the polymer's CH2Cl2 solution. The limiting oxygen index (LOI) of the PAEK was 40, which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.展开更多
Poly( aryl ether ketone) copolymers containing 2,7-naphthylene and hydroquinone(HQ) moieties with various compositions were prepared by the reaction of 4,4'-difluorobenzophenone(DFB) 2,7-naphthylene and hydroqu...Poly( aryl ether ketone) copolymers containing 2,7-naphthylene and hydroquinone(HQ) moieties with various compositions were prepared by the reaction of 4,4'-difluorobenzophenone(DFB) 2,7-naphthylene and hydroquinone in the presence of sodium carbonate and potassium carbonate ( 19: 1, mass ratio) in diphenyl sulfone (DPS). The thermal analysis results of the copolymers show that the glass transition temperatures(Tgs) increase, while the melting temperatures(Tra) and tile 5.0% weight loss temperatures ( Td ) decrease with the increase of the 2,7-naphthalene moieties. For the copolymers synthesized at a molar fraction of 2,7-naphthalene in the difluoro monomers being over 0.30, no peaks corresponding to the cold crystallization temperature and the melting temperature could be detected, indicating that these copolymers are almost amorphous. The crystal structures of the copolymers with a molar fraction of 2,7-naphthalene being less than 0. 30 are rhombic.展开更多
A ternary hybrid membrane architecture consisting of sulfonated fluorinated multi-block copolymer (SFMC), sulfonated (poly ether ether ketone) (SPEEK) and I or 5 wt% graphene oxide (GO) was fabricated through ...A ternary hybrid membrane architecture consisting of sulfonated fluorinated multi-block copolymer (SFMC), sulfonated (poly ether ether ketone) (SPEEK) and I or 5 wt% graphene oxide (GO) was fabricated through a facile solution casting approach. The simple, but effective monomer sulfonation was performed for SFMC to create compact and rigid hydrophobic backbone structures, while conventional random sulfonation was carried-out for SPEEK. Hydrophilic-hydrophobic-hydrophilic structure of SFMC enhances the compatibility with SPEEK and GO and allows for an unprecedented approach to alter me- chanical strength and proton conductivity of ternary hybrid membrane, as verified from universal test machine (UTM) curves and alternating current (AC) impedance plots. The impact of GO integration on the morphology and roughness of hybrid membrane was scrutinized using field emission scanning electron microscope (FE-SEM) and atomic force microscope (AFM). Ternary hybrid showed uniform intercalation of GO nanosheets throughout the entire surface of membrane with an increased surface roughness of 8.91 nm. The constructed ternary hybrid membrane revealed excellent water absorption, ion exchange capacity and gas barrier properties, while retaining reasonable dimensional stability. The well-optimized ternary hybrid membrane containing 5 wt% GO revealed a maximum proton conductivity of 111.9 mS/cm, which is higher by a factor of two-fold with respect to that of bare SFMC membrane. The maximum PEMFC power density of 528.07mW/cm2 was yielded by ternary hybrid membrane at a load current density of 1321.1 mA/cm2 when operating the cell at 70 ℃ under 100% relative humidity (RH). In comparison, a maximum power density of only 182.06 mW/cm2 was exhibited by the bare SFMC membrane at a load current density of 455.56 mA/cm2 under same operating conditions.展开更多
Poly(Imino Ketone) (PIK) is a group of novel high performance polymer material with excellent thermal properties and dissolubility. Aiming at the requirements of inertial confined fusion (ICF) studies on low den...Poly(Imino Ketone) (PIK) is a group of novel high performance polymer material with excellent thermal properties and dissolubility. Aiming at the requirements of inertial confined fusion (ICF) studies on low density polymer foams, we firstly synthesized poly(imino imino ketone) (PIIK) by palladium catalyzed C-N cross-coupling reaction, and successfully prepared the PIIK foam material with a density of 80-300 mg/cm3 by using PIIK as the raw material with thermal-induced phase separation and lyophilization technique. Mercury injection method was used to determine the structure of PIIK foams, and the results indicated that the mean pore diameter was lower than 5 ~tm and it had relatively high voidage and specific surface area.展开更多
The authors presented a novel synthetic route for the imidazolium functionalized poly(arylene ether ke- tone)s, derived from an engineering plastics polymer, a poly(arylene ether ketone) with 3,3',5,5'- tetramet...The authors presented a novel synthetic route for the imidazolium functionalized poly(arylene ether ke- tone)s, derived from an engineering plastics polymer, a poly(arylene ether ketone) with 3,3',5,5'- tetramethyl-4,4'-dihydroxybiphenyl moiety(PAEK-TM). The preparation of anion exchange membranes comprised converting benzylic methyl groups to bromomethyl groups by a radical reaction, followed by the functionalization of bromomethylated PAEK with alkyl imidazoles, i.e., methyl, butyl or vinyl imidazole. The structure of imidazolium functionalized PAEK was proved by 1H NMR spectra. A class of flexible and tough membranes was then achieved by subsequent film-forming and anion exchange processes. The water uptake and hydroxide conductivities of mem- branes are comparable or superior to those of quaternary ammonium(QA) anion exchange membranes. This work demonstrated a new route for non-QA anion exchange membrane design, avoiding the chloromethylation reagent and oreciselv controlling the degree and location of imidazolium grouos.展开更多
A new kind of optically active polymer bearing chiral amino alcohol was prepared by means of graft. The resulting grafted polymer was obtained as follows. First, the carbonyl of optically active helical poly(menthyl ...A new kind of optically active polymer bearing chiral amino alcohol was prepared by means of graft. The resulting grafted polymer was obtained as follows. First, the carbonyl of optically active helical poly(menthyl vinyl ketone)(poly-MVK) was reduced to hydroxyl group with lithium aluminum hydride as a reductant to yield poly(1-menthyl-2-propen-1-ol)(poly-MPO). Second, the hydroxyl group of poly-MPO reacted with epichlorohydrin to yield methyloxirane-loading poly-MPO[(poly-MPO)-MO]. Third, the(poly-MPO)-MO reacted with amine to pro- duce optically active polymer bearing chiral amino alcohol[(poly-MPO)-APO]. The (poly-MPO)-APO was applied to the asymmetric addition of phenylacetylene to aromatic ketone. Good enantioselectivities were achieved and the catalyst could be recovered and reused 5 times with unchanged enantioselectivity and slightly decreased activity.展开更多
High performance polymers have received considerable attention over the past decade owing to their increased demands as replacements for metals or ceramics in automotive, aerospace, and microelectronic industries. Pol...High performance polymers have received considerable attention over the past decade owing to their increased demands as replacements for metals or ceramics in automotive, aerospace, and microelectronic industries. Poly(aryl ether ketone)s(PAEKs) are a class of important high-performance aromatic polymers with excellent mechanical properties, good solvent resistance, size-accuracy, electrical characteristics, and superior thermal stability. However,展开更多
A novel type of aromatic poly( ether ether ketone) s with carboxyl groups were prepared by polycondensation of 4,4-bis(4-hydroxyphenyl)pentanoic acid with difluoro-monomers. Their mo- lecular structures were deter...A novel type of aromatic poly( ether ether ketone) s with carboxyl groups were prepared by polycondensation of 4,4-bis(4-hydroxyphenyl)pentanoic acid with difluoro-monomers. Their mo- lecular structures were determined by ^1H-NMR and IR, respectively. Their molecular weights were measured by gel permeation chromatography ( GPC ), which showed that all the polymers had high molecule weights ( 〉 42 000). Due to the long side chains of polymers, all the polymers had good solubility (soluble in NMP, DMAc, THF, etc. ). The differential scanning calorimeter (DSC) detected their excellent glass transition temperatures ( Tg ) up to 195 ℃. The Tg increased with the content of carboxylic units in the polymer chains, because the interactions of H bonds increased with increasing content of carboxylic. The polymers could form transparent and flexible films, which make them a candidate for membrane materials.展开更多
Two types of antioxidants(a primary antioxidant and a secondary antioxidant) were used to improve the stability of poly(ether ether ketone)(PEEK). The effects of the antioxidants on the properties of PEEK and th...Two types of antioxidants(a primary antioxidant and a secondary antioxidant) were used to improve the stability of poly(ether ether ketone)(PEEK). The effects of the antioxidants on the properties of PEEK and the stabilization mechanism were investigated by some characterization methods, such as rheometer, thermogravimetric ana- lysis(TGA), universal tester and electron spin resonance(ESR). The results indicate that the efficiency of the phosphorous antioxidant(DS) in improving the stability of PEEK was better than that of the phenolic antioxidant(DN) in both melting stability and thermal stability, and the thermal stability of PEEK sample containing 0.07%(mass fraction) DS was the best among all the samples due to the decrease of the free radicals density, as proven by ESR measurement. Additionally, no obvious changes could be observed in mechanical properties of PEEK containing antioxidants compared to those of virgin PEEK.展开更多
A novel La complex with methyl-2-pyridyl ketone benzoyl hydrazone has been synthesized and determined by single crystal X-ray diffraction. The crystal is monoclinic with space group C2/c, a =1 7081(3) nm, b =1 ...A novel La complex with methyl-2-pyridyl ketone benzoyl hydrazone has been synthesized and determined by single crystal X-ray diffraction. The crystal is monoclinic with space group C2/c, a =1 7081(3) nm, b =1 5660(3) nm, c =1 3512(3) nm, α=90 00°, β=94 39(1)°, γ=90 00°, V =3 6037(12) nm 3, Z =4 . The complex is a ten-coordinated one with a lanthanum ion surrounded by a N 4O 6 set. The crystal structure is stabilized by hydrogen bonds between water molecules and NO - 3 anions.展开更多
Michael addition of indole and pyrrole to a variety of α, β-unsaturated ketones was efficiently promoted by a catalytic amount of GaCl3 in aqueous media to afford the corresponding products in good to excellent yields.
基金Department of Science and Technology of Jilin Province,No.20210402019GH,Fundamental Research Funds of Jilin University,Seed Fund,No.2021ZZ021Jilin Province Education Science Planning Project,No.GH21006 and the Fundamental Research Funds for the Central Universities,No.2022CXTD03.
文摘Mental disorders such as depression and anxiety inflict significant burdens on individuals and society.Commonly prescribed treatments often involve cognitive therapy and medications.However,for patients resistant to these conventional methods,alternative therapies like the Ketogenic Diet(KD)offer a promising avenue.KD and its key metabolite,β-hydroxybutyrate(BHB),have been hypothesized to alleviate mental disorders through antiinflammatory actions,a crucial pathway in the pathophysiology of depression.This mini-review examines 15 clinical trials exploring the influence of KD and BHB on inflammation and their potential roles in managing mental disorders.Both human and animal studies were scrutinized to elucidate possible cellular and molecular mechanisms.Out of the 15 trials,10 reported reduced levels of at least one inflammatory mediator or mRNA post KD or BHB treatment,while two observed an elevation in anti-inflammatory agents.These findings suggest that KD and BHB could modulate cellular inflammatory pathways,highlighting their potential for therapeutic application in mental disorders.
文摘A new and simple route for the synthesis of α,β-unsaturated ketones via cleavage of the C-C(O)C single bond of monoalkylated β-diketone has been described. The reaction was catalyzed by copper, a cheap transition metal in a weakly basic medium (K<sub>3</sub>PO<sub>4</sub>) at room temperature. To carry out this study, we first had to synthesize the monoalkylated β-diketones 1. Afterwards, α,β-unsaturated ketones 2 were obtained with high yields around 80%. Finally, all the products were characterized by 1H NMR, 13C NMR, and HRMS spectra. .
基金This work was financially supported by the National Natural Science Foundation of China(No.15076017).
文摘Di(4-bromophenyl)ketone and various aromatic diamines as the monomers,a series of novel poly(imino ketone)s (PIKs)have been synthesized via palladium-catalyzed aryl amination,which is Hartwig-Buchwald polycondensation reaction.The structures of PIKs are characterized by means of elemental analysis,FT-IR,~1H-NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structure.The general properties of PIKs are studied by DSC,TG and wide-angle X-ray diffraction,the solubility behavior is...
基金partly financed by the Major State Basic Research Development Program of China(No.2003 CB615700)the National Natural Science Foundation of China(No.20604005).
文摘Chloromethylated poly(phthalazinone ether sulfone ketone) (CMPPESK) was prepared from poly(phthalazinone ether sulfone ketone) (PPESK) using chloromethyl octyl ethers (CMOE) with lower toxicity as chloromethylated regent. CMPPESK was soluble in N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc) and chloroform. Quaternized poly(phthalazinone ether sulfone ketone) (QAPPESK) was prepared from CMPPESK by quaternization. QAPPESK had excellent solvent resistance, which was only partly soluble in sulfuric acid (98%) and swollen in N,N-dimethylformamide (DMF). The vanadium redox flow battery (V-RFB) using QAPPESK anion-exchange membrane had better performance with 88.3% of overall energy efficiency.
基金Supported by the Scientific and Technological Development Programs of Beijing Municipal Education Commission, China (No.KM201010011004)the Scientific Research Foundation for the Returned Overseas Chinese Scholars, Ministry of Education, China, the 2011 Merit-based Research Funding for Picked Returned Overseas Scholars, Beijing Municipality, ChinaBeijing Technology and Business University Through a Research Project Approved for Undergraduates
文摘Photo-grafting of hydrophilic monomer was used to enhance the hydrophilicity of poly(ether ether ketone) (PEEK) with the aim of extending its applications to biological fields. PEEK sheets were surface modified by grafting of acrylamide(AAm) with ultraviolet(UV) irradiation in the presence or absence of benzophenone(BP). The effects of BP, irradiation time and monomer concentration on the surface wettability of PEEK were investigated. Characteriza tion of modified PEEK using scanning electron microscopy(SEM), energy-disperse spectrometer(EDS) and water contact angle measurements shows that AAm was successfully grafted on PEEK surface both in presence and absence of BP. With the increase in irradiation time and monomer concentration, contact angles decrease to as low as 30°, demonstrating a significant improvement of surface hydrophilicity. In agreement with the decrease in contact angle, under identical conditions, the nitrogen concentration increases, suggesting the increase in grafting degree of the grafting polymerization. This investigation demonstrates a self-initiation of PEEK due to its BP-like structure in the backbone of the polymer. Though the graft polymerization proceeds more readily in the presence of BP, the self-initiated graft polymerization is clearly observed.
文摘A novel series of poly(aryl ether sulfone ketone)s (PPESKs) containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures (Tg) and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction (WAXD).
基金Supported by the Scientific and Technological Development Programs of Beijing Municipal Education Commission,China(No.KM201010011004)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education,China,the 2011 Merit-based Research Funding for Picked Returned Overseas Scholars,Beijing Municipality(China)the Research Project Approved for Graduate Students of Beijing Technology and Business University,China(No.19000101026)
文摘UV-induced graft polymerization of acrylic acid(AA) on poly(ether ether ketone)(PEEK) films was carried out to introduce ―COOH for the subsequent immobilization of bovine serum albumin(BSA).BSA was introduced on PEEK surface based on the condensation reaction between ―NH 2 and ―COOH.The modified surface(PEEK-BSA) was characterized by energy-disperse spectrometry(EDS),X-ray photoelectron spectroscopy(XPS),water contact angle measurement and UV spectrum analysis.The contact angle was found to decrease from 104° for the virgin PEEK films to 63° for the BSA-immobilized PEEK films,demonstrating a significant improvement of surface hydrophilicity.Moreover,the appearance of nitrogen on PEEK film confirmed by XPS and EDS indicates the immobilization of BSA on PEEK surface.
基金This project was financially supported by National High Technology and Development Program of China(863 Program)(No.2003AA33G030)
文摘Trimethoxysilyl-functionalized PPEK(PKGS) films had been designed to serve as wear resistant coatings for silicon surfaces. These surface films were formed by a dip-coating technique applied to self-assembled monolayers(SAMs).The formation and wetting behavior of PKGS films were characterized by means of contact angle measurement.The friction coefficient of the film prepared is very low(about 0.1),and the anti-wear behavior is good,with a lack of failure after sliding over 1800 s.
基金This work was supported by the National Natural Science Foundation of China(No.50203008).
文摘A phosphrous-containing poly(aryl ether ketone) was synthesized derived from bisphenol-A and bis[4-(4- fluorobenzoyl)phenyl] phenyl phosphine oxide (FPPPO) by nucleophilic substitution reaction. The structure of the polymer was characterized by FT-IR, ^1H-NMR and ^31p-NMR. The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature (Tg) of the polymer was 205℃, and the 5% weight loss temperature under nitrogen was 475℃. Good solubility of the polymer in organic solvents, such as N-methylpyrrolidone, dimethylformamide, dimethylacetamide, dimethylsulfoxide and chloroalkanes was observed, flexible film was obtained from the polymer's CH2Cl2 solution. The limiting oxygen index (LOI) of the PAEK was 40, which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.
文摘Poly( aryl ether ketone) copolymers containing 2,7-naphthylene and hydroquinone(HQ) moieties with various compositions were prepared by the reaction of 4,4'-difluorobenzophenone(DFB) 2,7-naphthylene and hydroquinone in the presence of sodium carbonate and potassium carbonate ( 19: 1, mass ratio) in diphenyl sulfone (DPS). The thermal analysis results of the copolymers show that the glass transition temperatures(Tgs) increase, while the melting temperatures(Tra) and tile 5.0% weight loss temperatures ( Td ) decrease with the increase of the 2,7-naphthalene moieties. For the copolymers synthesized at a molar fraction of 2,7-naphthalene in the difluoro monomers being over 0.30, no peaks corresponding to the cold crystallization temperature and the melting temperature could be detected, indicating that these copolymers are almost amorphous. The crystal structures of the copolymers with a molar fraction of 2,7-naphthalene being less than 0. 30 are rhombic.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.20164030201070)supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science,ICT and future Planning(NRF-2017R1A2B4005230)
文摘A ternary hybrid membrane architecture consisting of sulfonated fluorinated multi-block copolymer (SFMC), sulfonated (poly ether ether ketone) (SPEEK) and I or 5 wt% graphene oxide (GO) was fabricated through a facile solution casting approach. The simple, but effective monomer sulfonation was performed for SFMC to create compact and rigid hydrophobic backbone structures, while conventional random sulfonation was carried-out for SPEEK. Hydrophilic-hydrophobic-hydrophilic structure of SFMC enhances the compatibility with SPEEK and GO and allows for an unprecedented approach to alter me- chanical strength and proton conductivity of ternary hybrid membrane, as verified from universal test machine (UTM) curves and alternating current (AC) impedance plots. The impact of GO integration on the morphology and roughness of hybrid membrane was scrutinized using field emission scanning electron microscope (FE-SEM) and atomic force microscope (AFM). Ternary hybrid showed uniform intercalation of GO nanosheets throughout the entire surface of membrane with an increased surface roughness of 8.91 nm. The constructed ternary hybrid membrane revealed excellent water absorption, ion exchange capacity and gas barrier properties, while retaining reasonable dimensional stability. The well-optimized ternary hybrid membrane containing 5 wt% GO revealed a maximum proton conductivity of 111.9 mS/cm, which is higher by a factor of two-fold with respect to that of bare SFMC membrane. The maximum PEMFC power density of 528.07mW/cm2 was yielded by ternary hybrid membrane at a load current density of 1321.1 mA/cm2 when operating the cell at 70 ℃ under 100% relative humidity (RH). In comparison, a maximum power density of only 182.06 mW/cm2 was exhibited by the bare SFMC membrane at a load current density of 455.56 mA/cm2 under same operating conditions.
基金Funded by the National Natural Science Foundation of China(No.11447215)Scientific Research Project of Mianyang Normal University(No.2013A02)Research Fund of Education Department of Sichuan Province(No.13ZB0118)
文摘Poly(Imino Ketone) (PIK) is a group of novel high performance polymer material with excellent thermal properties and dissolubility. Aiming at the requirements of inertial confined fusion (ICF) studies on low density polymer foams, we firstly synthesized poly(imino imino ketone) (PIIK) by palladium catalyzed C-N cross-coupling reaction, and successfully prepared the PIIK foam material with a density of 80-300 mg/cm3 by using PIIK as the raw material with thermal-induced phase separation and lyophilization technique. Mercury injection method was used to determine the structure of PIIK foams, and the results indicated that the mean pore diameter was lower than 5 ~tm and it had relatively high voidage and specific surface area.
基金Sui~ported by the National Natural Science Foundation of China(No.21104022) and the Special Fund for Basic Scientific Research of Central Colleges, Jilin University, China(No.450060491017).
文摘The authors presented a novel synthetic route for the imidazolium functionalized poly(arylene ether ke- tone)s, derived from an engineering plastics polymer, a poly(arylene ether ketone) with 3,3',5,5'- tetramethyl-4,4'-dihydroxybiphenyl moiety(PAEK-TM). The preparation of anion exchange membranes comprised converting benzylic methyl groups to bromomethyl groups by a radical reaction, followed by the functionalization of bromomethylated PAEK with alkyl imidazoles, i.e., methyl, butyl or vinyl imidazole. The structure of imidazolium functionalized PAEK was proved by 1H NMR spectra. A class of flexible and tough membranes was then achieved by subsequent film-forming and anion exchange processes. The water uptake and hydroxide conductivities of mem- branes are comparable or superior to those of quaternary ammonium(QA) anion exchange membranes. This work demonstrated a new route for non-QA anion exchange membrane design, avoiding the chloromethylation reagent and oreciselv controlling the degree and location of imidazolium grouos.
基金Supported by the National Natural Science Foundation of China(No.21172186) and the Higher Education Doctoral Science Foundation of China(No.20134301110004).
文摘A new kind of optically active polymer bearing chiral amino alcohol was prepared by means of graft. The resulting grafted polymer was obtained as follows. First, the carbonyl of optically active helical poly(menthyl vinyl ketone)(poly-MVK) was reduced to hydroxyl group with lithium aluminum hydride as a reductant to yield poly(1-menthyl-2-propen-1-ol)(poly-MPO). Second, the hydroxyl group of poly-MPO reacted with epichlorohydrin to yield methyloxirane-loading poly-MPO[(poly-MPO)-MO]. Third, the(poly-MPO)-MO reacted with amine to pro- duce optically active polymer bearing chiral amino alcohol[(poly-MPO)-APO]. The (poly-MPO)-APO was applied to the asymmetric addition of phenylacetylene to aromatic ketone. Good enantioselectivities were achieved and the catalyst could be recovered and reused 5 times with unchanged enantioselectivity and slightly decreased activity.
基金Supported by the National High Technology Research and Development Program of China(No.2006AA03Z543).
文摘High performance polymers have received considerable attention over the past decade owing to their increased demands as replacements for metals or ceramics in automotive, aerospace, and microelectronic industries. Poly(aryl ether ketone)s(PAEKs) are a class of important high-performance aromatic polymers with excellent mechanical properties, good solvent resistance, size-accuracy, electrical characteristics, and superior thermal stability. However,
基金Supported by Open Project of State Key Laboratory of Supramolecular Structure and Materials(SKLSSM201114)the National Natural Science Foundation of China(51103010)
文摘A novel type of aromatic poly( ether ether ketone) s with carboxyl groups were prepared by polycondensation of 4,4-bis(4-hydroxyphenyl)pentanoic acid with difluoro-monomers. Their mo- lecular structures were determined by ^1H-NMR and IR, respectively. Their molecular weights were measured by gel permeation chromatography ( GPC ), which showed that all the polymers had high molecule weights ( 〉 42 000). Due to the long side chains of polymers, all the polymers had good solubility (soluble in NMP, DMAc, THF, etc. ). The differential scanning calorimeter (DSC) detected their excellent glass transition temperatures ( Tg ) up to 195 ℃. The Tg increased with the content of carboxylic units in the polymer chains, because the interactions of H bonds increased with increasing content of carboxylic. The polymers could form transparent and flexible films, which make them a candidate for membrane materials.
基金Supported by the National Natural Science Foundation of China(No.51073066)
文摘Two types of antioxidants(a primary antioxidant and a secondary antioxidant) were used to improve the stability of poly(ether ether ketone)(PEEK). The effects of the antioxidants on the properties of PEEK and the stabilization mechanism were investigated by some characterization methods, such as rheometer, thermogravimetric ana- lysis(TGA), universal tester and electron spin resonance(ESR). The results indicate that the efficiency of the phosphorous antioxidant(DS) in improving the stability of PEEK was better than that of the phenolic antioxidant(DN) in both melting stability and thermal stability, and the thermal stability of PEEK sample containing 0.07%(mass fraction) DS was the best among all the samples due to the decrease of the free radicals density, as proven by ESR measurement. Additionally, no obvious changes could be observed in mechanical properties of PEEK containing antioxidants compared to those of virgin PEEK.
基金Supported by the National Natural Science Foundation of China( No. 2 98710 14 ) and the Foundation of Doctor byL anzhou U niversit
文摘A novel La complex with methyl-2-pyridyl ketone benzoyl hydrazone has been synthesized and determined by single crystal X-ray diffraction. The crystal is monoclinic with space group C2/c, a =1 7081(3) nm, b =1 5660(3) nm, c =1 3512(3) nm, α=90 00°, β=94 39(1)°, γ=90 00°, V =3 6037(12) nm 3, Z =4 . The complex is a ten-coordinated one with a lanthanum ion surrounded by a N 4O 6 set. The crystal structure is stabilized by hydrogen bonds between water molecules and NO - 3 anions.
基金support by the Natural Science Foundation of Zhejiang Province(No.Y4051137,Y405015 and Y4080177)
文摘Michael addition of indole and pyrrole to a variety of α, β-unsaturated ketones was efficiently promoted by a catalytic amount of GaCl3 in aqueous media to afford the corresponding products in good to excellent yields.