Study on thermal decomposition kinetics of azobenzene-4,4′-dicarboxylic acid by using compensation parameter method and nonlinear fitting evaluation

Recently,azobenzene-4,4'-dicarboxylic acid(ADCA)has been produced gradually for use as an organic synthesis or pharmaceutical intermediate due to its eminent performance.With large quantities put into application in the future,the thermal stability of this substance during storage,transportation,and use will become quite important.Thus,in this work,the thermal decomposition behavior,thermal decomposition kinetics,and thermal hazard of ADCA were investigated.Experiments were conducted by using a SENSYS evo DSC device.A combination of differential iso-conversion method,compensation parameter method,and nonlinear fitting evaluation were also used to analyze thermal kinetics and mechanism of ADCA decomposition.The results show that when conversion rate α increases,the activation energies of ADCA's first and main decomposition peaks fall.The amount of heat released during decomposition varies between 182.46 and 231.16 J·g^(-1).The proposed kinetic equation is based on the Avrami-Erofeev model,which is consistent with the decomposition progress.Applying the Frank-Kamenetskii model,a calculated self-accelerating decomposition temperature of 287.0℃is obtained.

An Investigation on Hydrogen Storage Kinetics of the Nanocrystalline and Amorphous LaMg12-type Alloys Synthesized by Mechanical Milling

Nanocrystalline and amorphous LaMg_（12）-type LaMg_（11）Ni ＋ x wt% Ni（x = 100, 200） alloys were synthesized by mechanical milling. Effects of Ni content and milling time on the gaseous and electrochemical hydrogen storage kinetics of as-milled alloys were investigated systematically. The electrochemical hydrogen storage properties of the as-milled alloys were tested by an automatic galvanostatic system. And the gaseous hydrogen storage properties were investigated by Sievert apparatus and a differential scanning calorimeter（DSC） connected with a H_2 detector. Hydrogen desorption activation energy of alloy hydrides was estimated by using Arrhenius and Kissinger methods. It is found that the increase of Ni content significantly improves the gaseous and electrochemical hydrogen storage kinetic performances of as-milled alloys. Furthermore, as ball milling time changes, the maximum of both high rate discharge ability（HRD） and the gaseous hydriding rate of as-milled alloys can be obtained. But the hydrogen desorption kinetics of alloys always increases with the extending of milling time. Moreover, the improved gaseous hydrogen storage kinetics of alloys are ascribed to a decrease in the hydrogen desorption activation energy caused by increasing Ni content and milling time.

A reduced combustion mechanism of ammonia/diesel optimized with multi-objective genetic algorithm

For the deep understanding on combustion of ammonia/diesel,this study develops a reduced mechanism of ammonia/diesel with 227 species and 937 reactions.The sub-mechanism on ammonia/interactions of N-based and C-based species(N—C)/NOx is optimized using the Non-dominated Sorting Genetic Algorithm II(NSGA-II)with 200 generations.The optimized mechanism(named as 937b)is validated against combustion characteristics of ammonia/methane(which is used to examine the accuracy of N—C interactions)and ammonia/diesel blends.The ignition delay times(IDTs),the laminar flame speeds and most of key intermediate species during the combustion of ammonia/methane blends can be accurately simulated by 937b under a wide range of conditions.As for ammonia/diesel blends with various diesel energy fractions,reasonable predictions on the IDTs under pressures from 1.0 MPa to5.0 MPa as well as the laminar flame speeds are also achieved by 937b.In particular,with regard to the IDT simulations of ammonia/diesel blends,937b makes progress in both aspects of overall accuracy and computational efficiency,compared to a detailed ammonia/diesel mechanism.Further kinetic analysis reveals that the reaction pathway of ammonia during the combustion of ammonia/diesel blend mainly differs in the tendencies of oxygen additions to NH_2 and NH with different equivalence ratios.

Syntheses,Crystal Structures and Kinetic Mechanisms of Thermal Decomposition of Rare Earth Complexes with Schiff Base Derived from o-Vanillin and p-Toluidine

Three complexes, [Pr（NO3）3（HL）2] （1）, [Nd（NO3）3（HL）2] （2） and [Er（NO3）3（HL）2] ·0.5H2O （3）, were synthesized from the reaction of a Schiff base ligand 2-[ （4-methylphenylimino）methyl ]-6-methoxyphenol （C15 H15 NO2, HL） with Ln（NO3）3·6H2O （Ln = Pr, Nd, Er）. Characterization by single-crystal X-ray diffraction technique, elemental analysis, molar conductance, FT-IR, UV-Vis, ^1H NMR and thermal analysis shows the title complexes are neutral molecules where the central Ln（ Ⅲ） ion is ten-coordinated in biapical anti-hexahedron prism geometry, with four oxygen atoms of the phenolic hydroxy and methoxy groups in the two bidentate Schiff base ligands and six oxygen atoms provided by the three bidentate NO3 - anions. Additionally, the kinetic mechanism of thermal decomposition of complex 3 was determined with a TG-DTG curves by both integral and differential methods. The functions of thermal decomposition reaction mechanism and the equation of kinetic compensation effect were obtained.

Kinetics and Mechanism of Decomposition of Nano-sized Calcium Carbonate under Non-isothermal Condition

Experiments on thermal decomposition of nano-sized calcium carbonate were carried out in a thermo-gravimetric analyzer under non-isothermal condition of different heating rates (5 to 20K·min-1). The Coats and Redfern's equation was used to determine the apparent activation energy and the pre-exponential factors. The mechanism of thermal decomposition was evaluated using the master plots, Coats and Redfern's equation and the kinetic compensation law. It was found that the thermal decomposition property of nano-sized calcium carbonate was different from that of bulk calcite. Nano-sized calcium carbonate began to decompose at 640℃, which was 180℃lower than the reported value for calcite. The experimental results of kinetics were compatible with the mechanism of one-dimensional phase boundary movement. The apparent activation energy of nano-sized calcium carbonate was estimated to be 151kJ·mol-1 while the literature value for normal calcite was approximately 200kJ·mol-1. The order of magnitude of pre-exponential factors was estimated to be 10~9 s-1.

Kinetic mechanism of magnesium production by silicothermic reduction of CaO·MgO in vacuum

The investigation of silicothermic reduction of CaO·MgO was carried out using a self-developed thermogravimetric analysis(TGA)instrument under vacuum and high temperature conditions.The TG data of pellets prepared with calcined dolomite,ferrosilicon and fluorite were determined at the heating rates of 1.5,2.0,2.5 and 3.0℃/min in 5 Pa vacuum at 300−1400℃,respectively.Model-free analysis and model-based analysis were applied for simulating the kinetic mechanism.By analyzing the characteristics of the initial and final reaction temperatures of TG curve,ratio of half-width of derivative TG curve and kinetic parameters,a conclusion was made that the most probable mechanism function is the first order formal chemical reaction with activation energy of 233.42 kJ/mol and pre-exponential factor of 5.14×1010 s−1.This study provides the basic data of dynamics of silicothermic magnesium production under vacuum conditions.

Kinetics and Mechanism of Oxidation of Glycol by Dihydroxydiperiodatonickelate ( Ⅳ )Complex in Aqueous Alkaline Medium

The kinetics of oxidation of glycol by dihydroxydiperiodato nickelate ( Ⅳ) complex (DDN) was studied by spectrophotometry in aqueous alkaline medium in a temperature range of 25-40℃. The reaction was found to be first order with respect to Ni( Ⅳ ) and also to be first order with respect to glycol. The rate increases with the increase in [OH ] and decreases with the increase in [IO-4], showing that dihydroxymonoperiodatonickelate ( Ⅳ )(DMN) is the reactive species of oxidant. Salt effect indicated that the reaction is of ion-dipole type. No free radical was detected. A mechanism of an inner-sphere two-electron transfer reaction involving a preequilibrium between DDN and DMN is proposed, and the rate equation derived from the mechanism can explain all experimental observations. Activation parameters of the rate-determing step and the equilibrium constants were calculated.

Topography,structure,and formation kinetic mechanism of carbon deposited onto nickel in the temperature range from 400 to 850°C

The carbon deposition behavior on nickel particles was observed within the temperature range from 400 to 800°C in a pure methane atmosphere. The topography, properties, and molecular structure of the deposited carbon were investigated using field-emission scanning electron microscopy (FESEM), temperature-programmed oxidation (TPO) technology, X-ray diffraction (XRD), and Raman spectroscopy. The deposited carbon is present in the form of a film at 400-450°C, as fibers at 500-600°C, and as particles at 650-800°C. In addition, the structure of the deposited carbon becomes more ordered at higher temperatures because both the TPO peak temperature of deposited carbon and the Raman shift of the G band increase with the increase in experimental temperature, whereas the intensity ratio between the D bands and the G band decreases. An interesting observation is that the carbon deposition rate is suppressed in the medium-temperature range (M-T range) and the corresponding kinetic mechanism changes. Correspondingly, the FWHM of the G and D1 bands in the Raman spectrum reaches a maximum and the intensities of the D2, D3, and D4 bands decrease to low limits in the M-T range. These results indicate that carbon structure parameters exhibit two different tendencies with respect to varying temperature. Both of the two group parameters change dramatically as a peak function with increasing reaction temperature within the M-T range.

Synthesis, Crystal Structure and Kinetic Mechanism of Thermal Decomposition of a Zinc(II) Complex with N-Salicylidene-p-toluidine

The title complex, Zn（C24H13NO）2Cl21, has been synthesized by the reaction of zinc chloride with Schiff base ligand N-salicylidene-p-toluidine and its structure was determined by single-crystal X-ray diffraction. The crystal is of monoclinic, space group Cc with a = 14.896（3）, b = 12.506（2）, c = 15.352（3） A,β = 114.711 （4）°, V = 2598.0（8） A^3, C28H26ZnCl2N2O2, Mr = 558.80, Z = 4, Dc = 1 .429 g/cm^3,μ = 1.179 mm^-1, Flack parameter = 0.027（19）, F（000） = 1152, R = 0.0709 and wR = 0.1041 for 3117 observed reflections （Ⅰ 〉 2σ（Ⅰ））. In complex 1, the center Zn ion is four-coordinated by two O atoms from two Schiff base ligands and two Cl atoms in a distorted tetrahedral geometry. Additionally, the thermal decomposition of complex 1 as well as its kinetic mechanisms and equations is studied under the non-isothermal integral and differential methods in air by TG-DTG curves.

Reaction condition optimization and kinetic investigation of roasting zinc oxide ore using (NH_4)_2SO_4

An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of（NH_4）_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for（NH_4）_2SO_4 and zinc mixed in a molar ratio of 1.4：1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.

Kinetics and Mechanism of the Oxidation of Glycol by Dihydroxyditelluratoargentate(Ⅲ) with Spectrophotometry

The kinetics of the oxidation of glycol by dihydroxyditelluratoargentate (Ⅲ) complex(DDA) was studied in alkaline medium with spectrophotometry(in a temperature range of 16\^6—40 ℃). The first order rates with respect to glycol and Ag(Ⅲ) were all found. The rates increased with the increase in [OH -] and decreased with the increase in [TeO 2- 4]. No effect was found with the addition of KNO 3 and no free radical was detected. In view of this, the dihydroxymonotelluratoargentate(Ⅲ) species(DMA) is assumed to be the active species. A plausible mechanism involving a two electron transfer is proposed, and the rate equation derived from the mechanism can explain all experimental observations. Activation parameters of the rate determining step and constants are evaluated.

SIMULTANEOUS POLYMERIZATION AND FORMATION OF POLYPHENYLACETYLENE FILMS BY RARE-EARTH COORDINATION CATALYSIS Ⅳ.KINETICS AND MECHANISM OF POLYMERIZATION

The CO_2 quenching method has been used for the first time to determine the active complex concen- tration in Nd(naph)_3-Al(i-Bu)_3 catalyst system for polymerization of phenylacetylene into polyphenylacetylene(PPA)films.The kinetics and mechanism of this polymerization have been investigated by CO_2 quenching and IR,UV analytical methods.The kinetic equation can be expressed as Rp=k[M][Cp],and the apparent activation energy is about 13.6 kJ/mol.There is self-termination of chain propagating.Models for formation of the active complex and polymerization mechanism are proposed.

Mechanism and Kinetics of Phase Transformation in Two-phase TiAl-based Alloys

The aged and quenched microstructures of both alloys, Ti-42at-%Al and Ti-45at -%Al,homogenized in the disordered single phase field. were investigated And the results show that the quinched microstructure is a supersaturated single phase of ordered 22. When the supersaturated phase is aged in the two phase range at 1273 and 1373 K, it will transform to a lamellar microstructure of γ+α2. with a discontinuous decomposition mechanism in Ti-42at-%Al alloy and a semicontinuous decomposition mechanism in T1-45at-%Al alloy. With the methods of quantitative metallograph examination and X-ray diffraction analysis. the relationship between the amount of γ, phase precipitation and the time of isothermal transformation is agreed

Kinetics and Mechanism of Oxidation of Lactic Acid by Dihydroxyditelluratoargentate(Ⅲ) in Alkaline Medium

The kinetics of the oxidation of lactic acid(Lac) by dihydroxyditelluratoargentate(Ⅲ)[abbreviated as DDA of Ag(Ⅲ)] anions was studied in an aqueous alkaline medium by conventional spectrophotometry in a temperature range of 25- 40 ℃ . The order of the redox reaction of lactic acid and DDA was found to be first order. The rates increased with the increase in and decreased with the increase in . No free radical was detected. In the view of this the dihydroxymonotelluratoargentate(Ⅲ) species(DMA) is assumed to be the active species. A plausible mechanism involving a two electron transfer is proposed, and the rate \{equation\} derived from the mechanism can be used to explain all the experimental results. The activation parameters(25 ℃) and the rate constants of the rate determining step along with the preequilibrium constants at different temperatures were evaluated.

Kinetics of the Thermal Decomposition of Wangjiatan Siderite

The thermal decomposition processes of Wangjiatan siderite samples were studied in nitrogen by thermogravimetric（TG）analysis.The mechanism of thermal decomposition of the siderite obeyed an F n kinetic law and the n-order was between 1.16 and 1.29.The results from non-isothermal experiments show that the size of particles has an obvious effect on the logarithm of pre-exponential factor in kinetics parameter of the thermal decomposition of Wangjiatan siderite.A linear relationship is shown between the size of particles and the logarithm of pre-exponential factor.An F 1 kinetic model containing size factor describes the thermal decomposition of Wangjiatan siderite well.

Kinetics and Mechanism of Iridium(Ⅲ)-Catalyzed Oxidation of Ethanol Amine by Cerium(Ⅳ) in Sulfuric Acid Media

In this study, the kinetics and mechanism of the iridium（ Ⅲ ） -catalyzed oxidation of ethanol amine（EAN） by cerium（Ⅳ） in a sulfuric acid medium was investigated using titrimetric technique of redox in a temperature range of 298--313 K. It was found that the reaction is of first order with respect to Ce（ Ⅳ ） and It（ Ⅲ ）, and a positive fractional order with respect to EAN. It was also found that the pseudo-first-order （ [EAN ] 〉〉 [ Ce （ Ⅳ） ] ） rate constant koba decreases with the increase of [ H^＋ ] and [ HSO^-4 ]. Under the protection of nitrogen gas, the reaction system can initiate the polymerization of acrylonitrile, indicating the generation of free radicals. On the basis of the experimental results, a suitable mechanism was proposed. From the dependence of koba on the concentration of hydrogen sulfate, Ce（SO4）2 was found to be the kinetically active species. The rate constants of the rote-determining step together with the activation parameters were evaluated.

Boosted Storage Kinetics in Thick Hierarchical Micro-Nano Carbon Architectures for High Areal Capacity Li-Ion Batteries

A practical and effective approach to increase the energy storage capacity of lithium ion batteries(LIBs)is to boost their areal capacity.Developing thick electrodes is one of the most crucial ways to achieve high areal capacity but limited by sluggish ion/electron transport,poor mechanical stability,and high-cost manufacturing strategies.Here we address these constraints by engineering a unique hierarchical-networked 10 mm thick all-carbon electrode,providing a scalable strategy to produce high areal capacity LIB electrodes.The hierarchical-networked structure utilizes micrometer-sized carbon fibers(MCFs)as building blocks,nano-sized carbon nanotubes(CNTs)as good continuous network with excellent electrical conductivity,and pyrolytic carbon as the binder and active material with excellent storage capacity.The combination of the above features endows our HNT-MCF/CNT/PC electrode with excellent performance including high reversible capacity of 15.44 mAh cm^(-2) at 2.0 mA cm^(-2) and exhibits excellent rate capability of 2.50 mAh cm^(-2) under 10.0 mA cm^(-2) current density.The Li-ion storage mechanism in HNT-MCF/CNT/PC involves dual-storage mechanism including intercalation and surface adsorption(pseudocapacitance)confirmed by the cyclic voltammetry and symmetric cell analysis.This work provides insights into the construction of high mechanical stability thick electrode for the next generation high areal capacity LIBs and beyond.

Self-organized evolution of mechanism kinetic scheme based on axiomatic design

The self-organized evolution technology of the mechanism kinetic scheme based on axiomatic design is presented. This technology tries to express the constraints between kinetic mechanisms briefly in a semantic form which is more familiar to the designers. Through the mapping process between the kinetic chain unit and the unit instance, the evolution from abstract unit to concrete engineering instance is achieved. The subdivision of unit coupling semantics is studied, and the evolution of semantics is finished. Also, the semantic constraints evolution of unit coupling semantics is described. The product structure models with function and assembly meanings are constructed based on the kinematic chain unit and unit coupling. It provides a basis to realize the inheritance and transfer of constraint information from conceptual design to design for assembly （DFA）. As the engineering practice result shows, the method can help the engineers express their And the automation, recursion and design intension more clearly and naturally in a high semantic level. visualization of the mechanism kinetic scheme design are realized

Kinetic Studies on Axial Coordination Reaction of Tetraphenylporphinatocobalt（Ⅱ） Chloride

he axial coordination reactions of tetraphenylporphinatocobalt (Ⅲ) chloride(Co TPPC1) with various imidazoles RIm ( HIm . imidazole; Melm , 2-methylimida-zole) were investigated in acetone and dichloromethand solvents at different temper-atures. The reaction mechanisms were proposed and the differences between experi-mental results in the two solvents h ave been interpreted using the proposed mecha-nisms and rate equations for the first time , and the reaction scheme for the axial re-action of the metalloporphyrin has been developed. Hydrogen bonding plays an im-portant role in the reactions. The effects of various imidazoles for these reactionsand the solvents are reported. The comparison between iron and cobalt porphyrinsin the kinetics are discussed.

Kinetics and Mechanism of Adsorption of Phosphate on Fluorine-containing Calcium Silicate

The nanowires-reticulated calcium silicate with a specific surface area more than 100 m^2/g was prepared by a hydrothermalprocess using hydrated lime（Ca（OH）_2,HL）and silica containing soluble fluoride,which was a by-product of fluorine industry,and the soluble fluoride in raw silica was fixed as CaSiF_6 at the same time.The kinetic characteristics and mechanism of adsorbing phosphate by fluorine-containing calcium silicate were investigated in the experiments of phosphorus（P）removalfrom aqueous solution.The results show that the prepared fluorine-containing calcium silicate has excellent performance for adsorbing phosphate,the adsorption process appears to follow pseudo-second-order reaction kinetics and the process is mainly controlled by chemisorption.The product resulted from P adsorption is mainly composed of hydroxyapatite（HAP）and fluorapatite（FAP）,which are further used as adsorbents of heavy metalion Cd^（2＋） in aqueous solution and display excellent performance.