Prediction of the thermo-elastic properties of knitted structural composites using FEM

It is a very important and complex task to estimate the thermo-elasticproperties of a textile structural composite. In this paper, the finite element method (FEM) wasused for the prediction of the orthotropic thermo-elastic properties of a composite reinforced byglass fiber knitted fabric. In order to define the final 3-D configuration of the loop reinforcingstructure, the interactions between the adjacent loops, the large displacement and the contactelements without friction were considered. The values predicted were compared with the experimentalresults.

Study on the Flame-retardant Properties of High Flame-retardant Acrylic Fiber Knitted Fabrics

This paper involved five kinds of weft-knitted fabrics made from high flame-retardant acrylic/cotton(0/100,30/70,50/50,70/30,100/0).The article adopted the vertical burning method,limiting oxygen index method and Cone Calorimeter test method for testing fabric flame retardant property.By comparison with these five fabrics,the effects on the properties of high flame-retardant acrylic fiber knitted fabrics due to the content of high flame-retardant acrylic fiber were analyzed.

A MICRO-MECHANICAL MODEL OF KNITTED FABRIC AND ITS APPLICATION TO THE ANALYSIS OF BUCKLING UNDER TENSION IN WALE DIRECTION:MICRO-MECHANICAL MODEL

The typical micro-knitting structure of knitted fabric,which makes it very different from woven fabric,is described.The tensile tests of knitted fabric are reported.The deformations of the micro-knitting structures are carefully studied.The study indicates that when a knitted fabric sheet is subjected to a tension along w-direction an extra compressive stress field inside loop in c-direction is induced.The extra stress field is also determined through analysis.Finally,a micro-mechanical model of knitted fabric is proposed.This work paves the way for the simulations of buckling modes of a knitted fabric sheet as are observed in experiments.

Tensile Properties of Weft Knitted Fabric Reinforced Composites

Seven kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/epoxy composite laminates. Tensile tests were carried out to examine and compare the mechanical properties in course and wale direction of these composites. On the basis of experimental results, attempts have been made to analyze some main factors influencing stress-strain curve, ultimate tensile strength and initial elastic modulus of specimens.

Wet Permeability and Moisture Vapor Transmission Characteristics of Soybean Knitted Fabrics

Wet permeability of fibrous assembly is mainly influenced by the properties of liquid and the configurations of the fiber which consist of diameter of fiber, twist angle and fiber alignment in a yarn. It can be seen from experimental results that the knitted fabric made of soybean (SB) fiber has goodproperties both in wet permeability and vapor transmission so that the knitting technology and fabric characteristics can be improved.

Investigation on the Dimensional Properties of Relaxed Plain Knitted Fabrics

A geometric model of relaxed plain-nitted fabric isproposed.A method based on the model for predictingthe loop length from the course spacing,wale spacing offabric and the diameter of yarn is deduced,as well as a computer program is developed to graphically represent the structures of plain knitted fabric with various struc-tural parameters.

Finishing Effect on Warmth Property of Cotton/Kapok Blended Knitted Fabric

Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has hollow body and sealed tail,which exhibits desirable features required for functional textiles of this nature. In this study,cotton / kapok( 80 /20 by mass) blended yarn with two types of yarn size 18. 5 and 14. 8 tex,respectively are knitted into plain stitches. The fabrics are undergone with an optimal preparation plan according to orthogonal design. Then,after dyeing and softening,fabric properties including thermal and water-vapour resistances, wicking property, pilling behaviour, and surface morphology,are tested and scrutinized for their candidacy for thermal underwear. The results showed that cotton / kapok blended fabrics have good thermal resistance which is significantly higher than those of cotton / modal blended fabrics,and the same water vapour resistance compared with cotton / modal blended fabrics which are normally used as underwear. Cotton / modal blended knitted fabrics has better pilling grade than cotton / kapok blended fabrics. Meanwhile, the cotton / kapok blends fabrics have good wicking property. Collectively,it was concluded that cotton / kapok blended fabric was appropriate for thermal underwear. However,the main limitation of these fabrics is their pilling properties.

A micro-mechanical model of knitted fabric and its application to the analysis of buckling under tension in wale direction:buckling analysis

With the aid of the micro-mechanical model of knitted fabric proposed in Part 1 we analyze the buckling of a knitted fabric sheet when it is subjected to a tension along the wale direction. The large deformation of the fabric sheet in the critical configuration is considered and, to avoid possible deviation due to the approximation of the theory of thin plate, the three-dimensional theory of instability is used. The fabric sheet is considered as a three-dimensional body and all boundary conditions are satisfied. It is shown that the buckling of the fabric sheet is possible, two buckling modes and the corresponding buckling conditions are obtained, but only the flexural mode is physically possible as observed in experiments.

Effect of Run - in Ratios on the Mechanical Properties of Two - Guide Bars Warp - Knitted Fabrics

Warp knitting technology gets rapid development at present and becomes one of the most important parts of the textiles.But it is less known how the parameters of warp knitting technology affect the mechanical properties of warp-knitted fabrics.This paper presents discuss a research on the relationships between run-in ratio and mechanical properties of the two-bar warp-knittedfabrics through the measurement and analysis of the mechanical properties of various samples with different run-in ratios.The optimal run一in ratios for the reasonable mechanical properties are obtained from above dis-

Fabrication of a Knitted Biodegradable Stents for Tracheal Regeneration

Endoluminal stents for reinforcement and regeneration of human trachea have been developed by weft-knitting method on a small-diameter circular knitting machine. The constituent materials of the stent are Polyglactin, Polypropylene and Chitosan with Polyglactin and Polypropylene plate-stitched fabric acting as backbone while chitosan as matrix, respectively. The fabrication procedures including knitting and coating are described in this paper. Mechanical and animal tests have been carried out to evaluate the mechanical properties of the stents.

Flexural Properties of Weft Knitted Fabric Reinforced Composites

Several different kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/polyester composite laminates. Flexural tests were carried out to examine stress- deflection process and compare the mechanical properties in course and wale directions of these composites. The experimental results indicate that the numbers of load-bearing yarn in course and wale direction and the fabric density are the main factors influencing the ultimate tensile strength and initial elastic modulus of specimens.

Application of Bi-axial Warp Knitted Structures in Concrete Constructions

The warp knitted bi-axial directionally oriented structure (D. O. S. ) reinforcement substrates applied to building construction are discussed in comparison to woven fabrics. One of usage barriers of reinforced cement with gloss-grid is its sensitivity to alkali existed in the cement which will lead to the reduction of its service-life. The tests show that the treatment by sol-gel method to protect the composite from alkali corrosion is effective. Then two formulae of sol-gel solution are also recommended here for application.

Study on How to Design Knitted Fabric Pattern with Mathematical Theory

To improve design capabilities for the knitted fabric pattern,a preliminary study is carried out for the design method.Based on mathematical theory,pattern could be created automatically by computer with inputting different parameters for mathematical functions.The knitted fabric simulation is realized by M1 CAD pattern preparation system of STOLL Company.In the pattern,different color unit is replaced by obverse stitch with different color,or by obverse stitch and reverse stitch with the same color separately,after that the effects of knitted fabrics could be simulated.Designing with this method,it would not only help to acquire a great of diversity patterns,but also improve design efficiency and save cost.

Effect of Knitted Structures and Yarn Count on the Properties of Weft Knitted Fabrics

This paper is focused on change in shrinkage, GSM, Wales per Inch and Course per Inch due to structure and count variation and state variation. This work was carried out with 12 samples of single jersey, single lacoste and weft lock knit fabrics of different counts which were scoured with NaOH. After pretreatment process the samples were tested for widthwise shrinkage, width, GSM, Wales per Inch and Course per Inch and compared between different states like grey state and finished state. The result obtained in this research indicated that physical properties like structures with tuck stitch possess higher value of widthwise shrinkage, width, GSM and Wales per Inch and Course per Inch value lowers prominently in those structures having float or miss stitches. In both cases i.e. grey state and RFD state values of those properties are high in coarser yarn and low in finer yarn. During project knitted fabrics specification along with machine specification and major factors which are necessary to calculate different types of variation and variables on which the whole fabric construction depends were managed to watch carefully. Main efforts were to develop a dependable way so that the resulting fabric specifications with required configuration can be easily visualized and be forecasted. A great emphasization was provided to the adjustable points on which fabric GSM, stitch length, fabric width and shrinkage percentage directly or indirectly depends.

Investigation of Different Washing Effects on Physical and Mechanical Properties of Cotton Knitted Garments

This paper deals with three types of washing (enzyme, softener, Silicone) effects on 100% cotton Single Jersey T-shirt, Slub Single Jersey T-shirt, Double Lacoste (5% Lycra) Polo shirt, Single jersey CVC (T-shirt) and PC single Jersey (T-shirt). Typical industrial washing procedures and techniques were followed and then physico-mechanical properties were analyzed under standard condition. It is observed that after washing, weight of each garments has increased from 5% to 36%;stitch length of the constituted fabric has decreased from 1% to 10% approximately;CPI has increased 23% for CVC fabric only for enzyme treatment and for other process it has a little bit or no wash effects. Same effects found for WPI except 100% cotton and Double Lacoste. Shrinkage property both for lengthwise and widthwise remains the same except CVC and Double Lacoste knitted garments and spirality has almost unchanged except 100% cotton and slub fabric. Both the dry and wet rubbing properties have improved after any types of wash except 100% cotton on Silicone wash. Water absorbency property has increased;pH of all the samples is under controlled and lies between 4.5 and 5.0. But there is no significant change of colorfastness to wash and stain after these washing treatments.

Research on the Dyeing Properties of Silk-like Knitted Fabric of Ultra-fine Polyester Fiber

In this paper, dyeing processes of silk-like fabric of ultra-fine polyester fiber are studied through orthogonal experiment, dyeing properties (K/S value, L* value, and C* value) of the fabric are tested under different dyeing conditions (pH value, time, and bath ratlo), and optimum dyeing conditions are arrived at through analysis.

Experimental Study on the Mechanical Properties of Novel Plate-knitted Composite Tracheal Stents

A new knitted composite artificial tracheal stent made of polyglactin(PGLA) and polypropylene (PP) filaments for reinforcement and regeneration of human trachea has been developed by plated-knitting technique on a small-diameter circular knitting machine.Both tensile and compressive tests were carried out to determine the Young's modulus and the critical pressure corresponding to crushing of the stent.The experimental results confirmed that the new type of knitted composite artificial stent is mechanically feasible.

Modeling Locking Angle of the Multi-layered Biaxial Weft Knitted Fabric in Shear Deformation

This paper introduces the construction of the multi-layered biaxial weft knitted fabric （MBWK fabric） and studies the locking angle of this kind of fabric. Moreover, a locking angle model of the MBWK fabric is established for the first time according to its unique construction. Two kinds of locking angles are considered under different restraint conditions: the locking angle θ1 controlled by the inserting yarns and the locking angle θ2 controlled by the stitch yarns. It is concluded that the ultimate value of the locking angle θ is the larger one of the two angles.

A Distributed Online Custom System for Knitted Sweater

A new application of Sun ONE architecture — an online custom system for Knitted Sweaters is presented, which links sweater design, manufacturing and sales in different places to share information through the Internet.The framework and characteristics of J2EE and Sun ONE are analyzed. Having studied the requirements of the online custom system for knitted sweaters, the paper presents a detailed and original system design based on J2EE technology and Web Services. This paper also gives descriptions on how to assemble and deploy the whole system under the Sun ONE architecture.

Development of Warp Knitted Products on RSJ Machine

Products made by Raschel Jacquard(RSJ)high-speed jacquard warp knitting machine are used in ornament and apparel fabrics.However,most products are produced according to the existing samples.The capability of creative design is not enough at home.In this paper,based on the basic features,the knitting methods and the working principles of warp knitting jacquard machines,the rules for manufacturing jacquard products are summarized.The article provides the new thoughts for the development of fabrics,such as the pattern design,changing the cams,power-net and a special technology of without pillar,which were obtained from the practices in a factory.