Metal rubber （MR） is a kind of homogeneous poroelastic damping material made of metal wire. In this paper, by ana- lyzing the forces on the MR isolator and the MR element, the hysteresis loops of the force and defor...Metal rubber （MR） is a kind of homogeneous poroelastic damping material made of metal wire. In this paper, by ana- lyzing the forces on the MR isolator and the MR element, the hysteresis loops of the force and deformation are studied and verified by experiments. The results show that the force and displacement hysteresis loop of the MR isolator is described by the force and deformation hysteresis loops of the MR elements. In addition, the relationship between the energy dissipation coefficient of the MR element and that of the MR isolator is derived. The energy dissipation coefficient is programmed and calculated by MATLAB using experimental data, and the results are compared with the theoretical value. It is the basis for the design and applied research of the MR isolator in a future study.展开更多
A squeeze film damper (SFD) with metal rubber (MR) ring installed on the end and the radial direction of rotor are implemented in this paper. Based on the hypothesis of π film, the description of the new SFD/MR flux ...A squeeze film damper (SFD) with metal rubber (MR) ring installed on the end and the radial direction of rotor are implemented in this paper. Based on the hypothesis of π film, the description of the new SFD/MR flux and nonlinear oil film damping force is derived according to the Reynolds Eq. and Darcy’s law. It proves that the SFD/MR has better damping characteristics than the traditional SFD after comparatively analyzing characteristics of oil film between the traditional short SFD and the SFD/MR.展开更多
A metal rubber（MR） dry friction damper was designed based on the load supported by the rotor. An experimental apparatus for obtaining hysteresis loops of support under the precession load was designed. The elastic-d...A metal rubber（MR） dry friction damper was designed based on the load supported by the rotor. An experimental apparatus for obtaining hysteresis loops of support under the precession load was designed. The elastic-damping characteristics of the ring-shaped MR damper used as a rotor support under variable loads were presented by studying the hysteresis loops of the damper. The vibration rigidity and the energy dissipation coefficient were calculated from the hysteresis loops, based on the description of the deformation process of the MR element with simple structure in a dimensionless coordinating system. The calculation results showed that the energy dissipation coefficient in the inner of MR element and on the boundary between the damper and the frame of the rotor support were approximately equal. The comparison of the hysteresis loops for a precession load and a one-axial load indicated a large difference when the coefficient of the energy dissipation and the stiffness of the MR damper were concerned.展开更多
The lifetime of metal rubber isolator and its characteristics during lifetime experiment were studied. The stepped-up test principle was adopted to study the lifetime of resonant frequency, the breakage form of metal ...The lifetime of metal rubber isolator and its characteristics during lifetime experiment were studied. The stepped-up test principle was adopted to study the lifetime of resonant frequency, the breakage form of metal rubber isolator was obtained, and the relation between the energy dissipation, resonant frequency and stiffness was obtained in (available) lifetime of the isolator. Furthermore, the reason for the changes of properties of metal rubber isolator was analyzed with contact model of metal rubber material. The results show that if the resonant amplitude is large, the stiffness of metal rubber isolator will be kept steadily for a long time, its resonant frequency will be stable and the effective working time in the protecting area will be long. The lifetime of metal rubber isolator is more than 1376 h in the experiment. The main failure forms of metal rubber isolator are accumulative wear and breaking of metal wires and spirals. In protecting area the metal rubber isolator can work effectively for a long time, and the effective working time depends on the concrete working condition.展开更多
Based on the analysis of the preparation of metal rubber （MR） and two pivotal hypotheses, the uniform distribution and the unaltered topological structure of wires in the radial direction of columns in the punch pro...Based on the analysis of the preparation of metal rubber （MR） and two pivotal hypotheses, the uniform distribution and the unaltered topological structure of wires in the radial direction of columns in the punch process, a 3D parametrical model was established based on four approaches： helix-making, planar roughcast-weaving, planar roughcast-rolling, and 3D roughcast punching. In the modeling process, 5 lattice types of weave patterns in planar roughcast were put forward, and 10 quantificational modeling parameters were picked up to exclusively define the column MR component structure. The wire distribution was visualized by CAD techniques. The important performance parameter of column MR components （relative density ρ^- ） can be forecasted by modeling computing, which provides the necessary foundation for the design and optimization of MR materials.展开更多
Recent advances in the application of the nonlinear energy sink under a sinusoidal excitation make it possible to investigate metal-rubber vibration absorber. To provide such a vibration absorber for the integrated sp...Recent advances in the application of the nonlinear energy sink under a sinusoidal excitation make it possible to investigate metal-rubber vibration absorber. To provide such a vibration absorber for the integrated spacecraft platform,we analyze the targeted energy transfer of the simplified model with nonlinear energy sink using the complex-variables averaging method. Theoretical study shows two quasi-periodic responses that are essentially different in this nonlinear system. The steady-state response which is one of two quasi-periodic responses is caused by the linear instability of system,and another one appears as a result of the nonlinear normal modes between the linear and nonlinear oscillators,resulting from the energy transfer of different oscillators,and it can be used to vibration absorber. Secondly,this paper also discusses the performance of the proposed nonlinear absorber by using the phase portraits. All conclusion derived by the analytic model is verified numerically and the results are consistent with numerical simulations.展开更多
Nano-enabled silicone-rubber articles for feeding or chewing could be a source of metallic nanoparticles(NPs)directly exposed to infants and young children.However,the impact of steam disinfection on release of NPs an...Nano-enabled silicone-rubber articles for feeding or chewing could be a source of metallic nanoparticles(NPs)directly exposed to infants and young children.However,the impact of steam disinfection on release of NPs and the related potential risks to children's health are unknown.Here,we investigated contents and form of Ag and Zn in 57 nano-enabled silicone-rubber baby bottle teats,pacifiers,and teethers of seven countries and examined the impacts of steam disinfection on in vitro bioaccessibility(IVBA)of Ag and Zn in the articles.Nearly 89%articles had a mixture of Ag-and Zn-containing NPs and the teethers had relatively high Ag and Zn contents(up to 501 and 254μg/g,respectively).Steam disinfection caused rubber decomposition into micro(nano)plastics(0.54-15.7μm)and NP release from the interior of bulk rubber and micro-sized plastics,thus enhancing the IVBA of Ag and Zn by up to 5.5 times.The findings provide insights into mechanisms for NP release by steam disinfection.Though oral exposure risk assessment suggested low health concerns on individual metal release,our study points out the need to assess the potential health risks of child co-exposure to metallic NPs and micro(nano)plastics.展开更多
文摘Metal rubber （MR） is a kind of homogeneous poroelastic damping material made of metal wire. In this paper, by ana- lyzing the forces on the MR isolator and the MR element, the hysteresis loops of the force and deformation are studied and verified by experiments. The results show that the force and displacement hysteresis loop of the MR isolator is described by the force and deformation hysteresis loops of the MR elements. In addition, the relationship between the energy dissipation coefficient of the MR element and that of the MR isolator is derived. The energy dissipation coefficient is programmed and calculated by MATLAB using experimental data, and the results are compared with the theoretical value. It is the basis for the design and applied research of the MR isolator in a future study.
文摘A squeeze film damper (SFD) with metal rubber (MR) ring installed on the end and the radial direction of rotor are implemented in this paper. Based on the hypothesis of π film, the description of the new SFD/MR flux and nonlinear oil film damping force is derived according to the Reynolds Eq. and Darcy’s law. It proves that the SFD/MR has better damping characteristics than the traditional SFD after comparatively analyzing characteristics of oil film between the traditional short SFD and the SFD/MR.
基金This project is supported by National Natural Science Foundation of China (No.50675042).
文摘A metal rubber（MR） dry friction damper was designed based on the load supported by the rotor. An experimental apparatus for obtaining hysteresis loops of support under the precession load was designed. The elastic-damping characteristics of the ring-shaped MR damper used as a rotor support under variable loads were presented by studying the hysteresis loops of the damper. The vibration rigidity and the energy dissipation coefficient were calculated from the hysteresis loops, based on the description of the deformation process of the MR element with simple structure in a dimensionless coordinating system. The calculation results showed that the energy dissipation coefficient in the inner of MR element and on the boundary between the damper and the frame of the rotor support were approximately equal. The comparison of the hysteresis loops for a precession load and a one-axial load indicated a large difference when the coefficient of the energy dissipation and the stiffness of the MR damper were concerned.
基金Project(50075017) supported by the National Natural Sceince Foundation of China
文摘The lifetime of metal rubber isolator and its characteristics during lifetime experiment were studied. The stepped-up test principle was adopted to study the lifetime of resonant frequency, the breakage form of metal rubber isolator was obtained, and the relation between the energy dissipation, resonant frequency and stiffness was obtained in (available) lifetime of the isolator. Furthermore, the reason for the changes of properties of metal rubber isolator was analyzed with contact model of metal rubber material. The results show that if the resonant amplitude is large, the stiffness of metal rubber isolator will be kept steadily for a long time, its resonant frequency will be stable and the effective working time in the protecting area will be long. The lifetime of metal rubber isolator is more than 1376 h in the experiment. The main failure forms of metal rubber isolator are accumulative wear and breaking of metal wires and spirals. In protecting area the metal rubber isolator can work effectively for a long time, and the effective working time depends on the concrete working condition.
文摘Based on the analysis of the preparation of metal rubber （MR） and two pivotal hypotheses, the uniform distribution and the unaltered topological structure of wires in the radial direction of columns in the punch process, a 3D parametrical model was established based on four approaches： helix-making, planar roughcast-weaving, planar roughcast-rolling, and 3D roughcast punching. In the modeling process, 5 lattice types of weave patterns in planar roughcast were put forward, and 10 quantificational modeling parameters were picked up to exclusively define the column MR component structure. The wire distribution was visualized by CAD techniques. The important performance parameter of column MR components （relative density ρ^- ） can be forecasted by modeling computing, which provides the necessary foundation for the design and optimization of MR materials.
基金Sponsored by the Open Fund of National Defense Key Discipline Laboratory of Micro-Spacecraft Technology(Grant No.HIT.KLOF.MST.201302)
文摘Recent advances in the application of the nonlinear energy sink under a sinusoidal excitation make it possible to investigate metal-rubber vibration absorber. To provide such a vibration absorber for the integrated spacecraft platform,we analyze the targeted energy transfer of the simplified model with nonlinear energy sink using the complex-variables averaging method. Theoretical study shows two quasi-periodic responses that are essentially different in this nonlinear system. The steady-state response which is one of two quasi-periodic responses is caused by the linear instability of system,and another one appears as a result of the nonlinear normal modes between the linear and nonlinear oscillators,resulting from the energy transfer of different oscillators,and it can be used to vibration absorber. Secondly,this paper also discusses the performance of the proposed nonlinear absorber by using the phase portraits. All conclusion derived by the analytic model is verified numerically and the results are consistent with numerical simulations.
基金supported by the Key-Area Research and Development Program of Guangdong Province (No.2020B1111380003)the National Natural Science Foundation of China (Nos.42177377 and 31861133003)。
文摘Nano-enabled silicone-rubber articles for feeding or chewing could be a source of metallic nanoparticles(NPs)directly exposed to infants and young children.However,the impact of steam disinfection on release of NPs and the related potential risks to children's health are unknown.Here,we investigated contents and form of Ag and Zn in 57 nano-enabled silicone-rubber baby bottle teats,pacifiers,and teethers of seven countries and examined the impacts of steam disinfection on in vitro bioaccessibility(IVBA)of Ag and Zn in the articles.Nearly 89%articles had a mixture of Ag-and Zn-containing NPs and the teethers had relatively high Ag and Zn contents(up to 501 and 254μg/g,respectively).Steam disinfection caused rubber decomposition into micro(nano)plastics(0.54-15.7μm)and NP release from the interior of bulk rubber and micro-sized plastics,thus enhancing the IVBA of Ag and Zn by up to 5.5 times.The findings provide insights into mechanisms for NP release by steam disinfection.Though oral exposure risk assessment suggested low health concerns on individual metal release,our study points out the need to assess the potential health risks of child co-exposure to metallic NPs and micro(nano)plastics.
