Spatial distribution characteristics and influence factor analysis of landslides——case study of the Hanwang area in Qinba Mountains

The geological hazards of landslides in Hanwang Town, Ziyang County, Ankang City, Shaanxi Province, have emerged. Yet, the current understanding of the spatial distribution characteristics and influencing factors of landslides in this area remains unclear. Combining the results of remote sensing interpretation and field investigation, seven influencing factors, namely, elevation, slope direction, slope gradient, distance from rivers, distance from faults, engineering geologic lithology, and distance from roads, are selected for the study. The distribution characteristics of landslides in each influencing factor and the influence of the resolution of the Digital Elevation Model(DEM) on the results are statistically and analytically analyzed. Furthermore, two highrisk landslides within the study area were subjected to comprehensive analysis, integrating the findings from drilling and other field investigations in order to examine their deformation mechanisms. Based on this analysis,the following conclusions were derived:(1) 34 landslides in the study area, mainly small earth landslides, with a distribution density of 0.42/km~2, threatening 414 people and property of about 55.87 million Yuan.(2)The landslides in the study area easily occur in the <400 m elevation range;the landslides are developed in all slope directions, the gradient is mainly concentrated in the range of 10°–40°, the distribution density of the landslides is higher in the closer distance from the river and the faults(0–200 m), the landslide-prone strata are mainly the softer and weaker metamorphic rocks, and the landslides are mainly around roads.(3) The resolution of the DEM should be selected based on the specific conditions of the study area, the requirements of the investigation, and the scale of the landslide. Opting for an appropriate DEM resolution is advantageous for understanding the patterns of landslides and conducting risk assessments in the region.(4) The Zhengjiabian landslide is a traction Landslide. The landslide body is a binary structure of gravel soil and slate weathering layer, and the damage process can be divided into three stages:(1)damage to the leading edge and stress release,(2)continuous creep and cracking,(3)rainfall infiltration and damage. The predominant slope material in the Brickyard landslide comprises clay, and the landslide is triggered by a combination of the traction effect resulting from the excavation at the slope's base and the nudging effect caused by the stacking load of the brick factory. Additionally, the Brickyard landslide exhibits persistent creep deformation. The study results provide a scientific basis for disaster prevention and mitigation in the Hanwang Township area.

Detailed Inventory Mapping and Spatial Analyses to Landslides Induced by the 2013 Ms 6.6 Minxian Earthquake of China

On July 22, 2013, an earthquake （Ms 6.6） occurred in Minxian, Gansu Province of China, causing a large number of landslides. Based on high resolution remote sensing images before and after this event, we made the visual interpretation to these coseismic landslides, and prepared a detailed inventory. The inventory registers totally 6 478 landslides in the study area. Of them, 3 322 landslides are larger than 100 m2. Based on 5 m resolution DEM, these landslides were used to perform spatial analyses using landslide number density （LND） and landslide area percentage （LAP）. The results show that the highest LND and LAP values are in the elevation range of 2 300-2 500 m and steeper slopes. Slopes facing E, SE, S and SW directions, slopes with larger absolute curvature values, ridges, scopes of gravel beds of Late Pleistocene （Qp） and the VIII-degree seismic intensity are more prone to sliding with high LND and LAP values. The largest LND and LAP values are in the scopes of 0.08 and 0.24 g, respectively. According to landslide distribution, we infer that F2-2 branch of Lintan-Dangchang fault is the seismogenic fault. With the increasing distances to this branch fault and drainages, LND and LAP values tend to decrease.