LARGE DEFLECTION PROBLEM OF THIN ORTHOTROPIC CIRCULAR PLATE ON ELASTIC FOUNDATION WITH VARIABLE THICKNESS UNDER UNIFORM PRESSURE

Basic equations for large deflection theory of thin orthotropic circular plate on elastic foundation with variable thickness under uniform pressure are derived in this paper. The second opproximation solutions are obtained by means of the modified iteration method. The relation curves of the nondimensional loading and foe deflection, as to the differential ε and μrθ and λ are shown in Figs. 2, 3, 4. In special circumstance, the results are in accordance with those in [1], [6].

APPLICATION OF THE MODIFIED METHOD OF MULTIPLE SCALES TO THE BENDING PROBLEMS FOR CIRCULAR THIN PLATE AT VERY LARGE DEFLECTION ANDTHE ASYMPTOTICS OF SOLUTIONS (Ⅰ)

In this paper, the modified method of multiple scales is applied to study the bending problems for circular thin plate with large deflection under the hinged and simply supported edge conditions. Theseries solutions are constructed, the boundary layer effects are analysed and their asymptotics are proved.

A NEW TECHNIQUE FOR SOLVING NON-AXIALLY SYMMETRICALLARGE DEFLECTION OF ELASTIC AND THIN CIRCULAR PLATES

A new technique for solving large deflection problem of circular plates flexural non-axisymmetrically is proposed in this paper. The large deflection problem of a circular plate with built-in edge under non-axisymmetrical load is taken as an example to clarify the principle and procedure of the technique mentioned here. The technique given here can also be used to solve large deflection problem of circular plates under other non-axisymmetrical loads and boundary conditions.

Two-Dimensional Large Deformation Finite Element Analysisfor the Pulling-up of Plate Anchor

Based on mesh regeneration and stress interpolation from an old mesh to a new one, a large deformation finite element model is developed for the study of the behaviour of circular plate anchors subjected to uplift loading. For the deterruination of the distributions of stress components across a clay foundation, the Recovery by Equilibrium in Patches is extended to plastic analyses. ABAQUS, a commercial finite element package, is customized and linked into our program so as to keep automatic and efficient running of large deformation calculation. The quality of stress interpolation is testified by evaluations of Tresca stress and nodal reaction forces. The complete pulling-up processes of plate anchors buried in homogeneous clay arc simulated, and typical pulling force-displacement responses of a deep anchor and a shallow anchor are compared. Different from the results of previous studies, large deformation analysis is of the capability of estimating the breakaway between the anchor bottom and soils. For deep anchors, the variation of mobilized uplift resistance with anchor settlement is composed of three stages, and the initial buried depths of anchors affect the separation embedment slightly. The uplift bearing capacity of deep anchors is usually higher than that of shallow anchors.

ANALYSIS OF THE LARGE DEFLECTION DYNAMIC PLASTIC RESPONSE OF SIMPLY-SUPPORTED CIRCULAR PLATES BY THE“MEMBRANE FACTOR METHOD”

Based on energy equilibrium,a new procedure called the Membrane Factor Method is devel- oped to analyze the dynamic plastic response of plates with deflections in the range where both bending mo- ments and membrane forces are important.The final deflection of a simply -supported circular rigid-plastic plate loaded by a uniformly distributed impulse is obtained.In comparison with other approximate solutions, the present results are found to be simpler and in better agreement with the corresponding experimental values reoorded by Florence.

Buckling and large deflection behaviors of radially functionally graded ring-stiffened circular plates with various boundary conditions

The buckling and large deflection behaviors of axis-symmetric radially functionally graded （RFG） ring-stiffened circular plates are investigated by the dynamic relaxation （DR） method combined with the finite difference discretization technique. The material properties of the constituent components of the RFG plate are assumed to vary continuously according to the Mori-Tanalka distribution along the radial direction. The nonlinear governing equations are obtained in the incremental form based on the firstorder shear deformation plate theory （FSDT） and the von Karman relations for large deflection. In the buckling analysis, an external in-plane load is applied to the plate in- crementally so that, in each load-step, the incremental form of the governing equations can be solved by a numerical code prepared based on the DR method. After converging the DR code in the first increment, the latter load-step is added to the previous one, and the program is repeated again. The critical buckling load is determined from the compressive load-displacement curve obtained by solving the incremental form of the governing equations. Based on the present incremental form of formulation, a bending analysis can also be conducted if the whole load is applied simultaneously. Finally, a detailed parametric study is carried out to investigate the influences of various boundary conditions, grading indices, thickness-to-radius ratios, stiffener＇s positions and depths on the critical buckling load, and displacements and stresses resulted from the bending analysis. It is observed that the effect of the stiffener on the results is much greater in the functionally graded plate with higher material grading indices. The results also reveal that, by increasing the depth of the stiffer, the values of ascending the critical buckling load are approximately identical for both simply supported and clamped boundary conditions.

Dynamic plastic response of clamped stiffened plates with large deflection

Study on the dynamic response, and especially the nonlinear dynamic response of stiffened plates is complicated by their discontinuity and inhomogeneity. The finite element method (FEM) and the finite strip method are usually adopted in their analysis. Although many useful conclusions have been obtained, the computational cost is enormous. Based on some assumptions, the dynamic plastic response of clamped stiffened plates with large deflections was theoretically investigated herein by a singly symmetric beam model. Firstly, the deflection conditions that a plastic string must satisfy were obtained by the linearized moment-axial force interaction curve for singly symmetric cross sections and the associated plastic flow rule. Secondly, the possible motion mechanisms of the beam under different load intensity were analysed in detail. For structures with plastic deformations, a simplified method was then given that the arbitrary impact load can be replaced equivalently by a rectangular pulse. Finally, to confirm the validity of the proposed method, the dynamic plastic response of a one-way stiffened plate with four fully clamped edges was calculated. The theoretical results were in good agreement with those of FEM. It indicates that the present calculation model is easy and feasible, and the equivalent substitution of load almost has no influence on the final deflection.

FURTHER STUDY ON LARGE DEFLECTION OF CIRCULAR SANDWICH PLATES

In this paper, a nonlinear solution is first presented for a circular sandwich plate with the flexure rigidity of the face layers taken into account. In solving the nonlinear bending equations, a modified power series method is proposed. The uniformly distributed loading and the clamped but sliding boundary condition are also assumed. Then our results are compared with those from Liu Ren-huai and Shi-Yun-fang[15]. The present solution can be used ax a more accurate basis in engineering applications.

UNSYMMETRICAL LARGE DEFORMATION PROBLEM OF ORTHOTROPIC PLATES

Based upon the theory of ardsotropic plates, the unsymmetrical large deformation equations of orthotropic circular plates were derived. By using Fourier series, the partial differential equations of this problem can be transformed into sets of nonlinear differential equations . And the procedure to solve the problem using the iterative method is given .

LARGE DEFLECTION PROBLEM OF A CLAMPED ELLIPTICAL PLATE SUBJECTED TO UNIFORM PRESSURE

In this paper, the perturbation solution of large deflection problem of clampedelliptical plate subjected to uniform pressure is given on the basis of the perturbationsolution of large deflection problem of similar clamped circular plate (1948)[1], (1954)[2]. The analytical solution of this problem was obtained in 1957. However, due to social difficulties, these results have never been published. Nash and Cooley (1959)[3] published a brief note of similar nature, in which only the case λ=a/b=2 is given. In this paper, the analytical solution is given in detail up to the 2nd approximation. The numerical solutions are given for various Poisson ratios v =0.25, 0.30, 0.35 and for various eccentricities λ= 1, 2, 3, 4, 5, which can be used in the calculation of engineering designs.

ON THE METHOD OF ORTHOGONALITY CONDITIONS FOR SOLVING THE PROBLEM OF LARGE DEFLECTION OF CIRCULAR PLATE

In this paper, we reexamine the method of successive approximation presented by Prof. Chien Wei-zangfor solving the problem of large deflection of a circular plate, and find that the method could be regarded as the method of strained parameters in the singular perturbation theory. In terms of the parameter representing the ratio of the center deflection to the thickness of the plate, we make the asymptotic expansions of the deflection, membrane stress and the parameter of load as in Ref. [1], and then give the orthogonality conditions (i.e. the solvability conditions) for the resulting equations, by which the stiffness characteristics of the plate could be determined. It is pointed out that with the solutions for the small deflection problem of the circular plate and the orthogonality conditions, we can derive the third order approximate relations between the parameter of load and the center deflection and the first-term approximation of membrane stresses at the center and edge of the plate without solving the differential equations. For some special cases (i.e. under uniform load, under compound toad, with different boundary conditiors), we deduce the specific expressions and obtain the results in agreement with the previous ones given by Chien Wei-zang, Yeh kai-yuan and Hwang Chien in Refs. [1 - 4J.

ANALYSIS OF THE LARGE DEFLECTION DYNAMIC RESPONSE OF RIGID-PLASTIC CIRCULAR PLATE RESTING ON FLUID

A study is presented for the large deflection dynamic response of rigid- plastic circular plate resting on potential fluid under a rectangular pressure pulse load. By virtue of Hankel integral transform technique,this interaction problem is reduced to a problem of dynamic plastic response of the plate in vacuum.The closed-form solutions are derived for both middle and high pressure loads by solving the equations of motion with the large deflection in the range where both bending moments and membrane forces are important.Some numerical results are given.

ITERATIVE METHOD FOR LARGE DEFLECTION NONLINEAR PROBLEM OF LAMINATED COMPOSITE SHALLOW SHELLS AND PLATES

Based on the results by Wang,in this paper, the iterative method is presented for the study of large deflection nonlinear problem of laminated composite shallow shells and plates. The rectangular laminated composite shallow shells have been analyzed. The results have been compared with the small deflection linear analytical solution and finite element nonlinear solution. The results proved that the solution coincide with small deflection linear analytical solution in the condition of the low loads and finite element nonlinear solution in the condition of the high loads.

LARGE DEFLECTION DYNAMIC PLASTIC RESPONSE OF CLAMPED SQUARE PLATES WITH STIEEENERS

The large deflection dynamic plastic response of fully clamped square plates with stiffeners under blast load is analyzed in detail in this paper. Various relevant motion patterns and criterions are presented. The formulas of maximum permanent deformation of the plates with stiffeners are derived. The results of calculation are compared with those of experiment in [3], with good agreement shown in most cases.

Comparison Between Two Solutions Based on the Relationship of Load-deflection Character of a Large Deflection Rubber Circular Plate

The rubber circular plate is considered as a kind of membrane. Based on the character that there exists no bending moment inside a membrane, the geometric behavior of the rubber circular plate in expanding state was described with the aid of a group of mathematic method. The relationship between deflection and load was attained by means of calculating stress and strain inside the curved surface of rubber plate. Meantime, based on Hencky method, the relationship between deflection and load was attained and considered as the Hencky solution. The different results given rise by the two different resolving methods were compared. The deviation results from the Hencky method was discussed, and a kind of correcting method was put forward.

THE SOLUTION OF RECTANGULAR PLATES WITH LARGE DEFLECTION BY SPLINE FUNCTIONS

In this paper, Von Karman's set of nonlinear equations for rectangular plates with large deflection is divided into several sets of linear equations by perturbation method, the dimensionless center deflection being taken as a perturbation parameter. These sets of linear equations are solved by the spline finite-point (SFP) method and by the spline finite element (SFE) method. The solutions for rectangular plates having any length-to-width ratios under a uniformly distributed load and with various boundary conditions are presented, and the analytical formulas for displacements and deflections are given in the paper. The computer programs are worked out by ourselves. Comparison of the results with those in other papers indicates that the results of this paper are satisfactorily better.

LARGE DEFLECTION PROBLEM OF CIRCULAR PLATES WITH VARIABLE THICKNESS UNDER THE ACTION OF COMBINED LOADS

By using the modified iteration method of large deflection theory of plates with variable thichness[1], we solve the problem of circular plates with variable thickness subjected to combined loads under the boundary conditions of the clamped edges and get comparatively more accurate second-order approximate analytical solution. If the results of this paper are degraded into the special cases, the results coinciding with those of papers [1,2] can be obtained. In this paper, the characteristic curves are plotted and some comparisons are made. The results of this paper are satisfactory.

A MIXED VARIATIONAL FORMULATION FOR LARGE DEFORMATION ANALYSIS OF PLATES

A mixed vuriational formulation for large deformation analysis of plates is introduced. In this formulation the equilibrium ami compatibility equations are satisfied identically by means of stress functions and displacement components, respectively, and the constitu,lye equations are satisfied in a least square sense. An example is solved and the results are compared with those available in the literature.Further, the functional is particularized for buckling analysis of plates and a simple example is solved to illustrate the theory.

Large Amplitude Flexural Vibration of the Orthotropic Composite Plate Embedded with Shape Memory Alloy Fibers

The free and forced vibration of large deformation composite plate embedded with shape memory alloy （SMA） fibers is investigated. A thermo-mechanical constitutive equation of SMA proposed by Brinson et al. is employed and the constitutive equations for evaluation of the properties of a hybrid SMA composite laminate are obtained. Based on the nonlinear theory of symmetrically laminated anisotropic plates, the governing equations of flexural vibration in terms of displacement and stress functions are derived. The Galerkin method has been used to convert the original partial differential equation into a nonlinear ordinary differential equation, which is then solved with harmonic balance method. The numerical results show that the relationship between nonlinear natural frequency ratio and temperature for the nonlinear plate has similar characteristics compared with that of the linear one, and the effects of temperature on forced response behavior during phase transformation from Martensite to Austenite are significant. The effects of the volume fraction of the SMA fiber, aspect ratio and free vibration amplitude on the dynamical behavior of the plate are also discussed.

Axisymmetrical Nonlinear Bending and Buckling of a Circular Plate Under Large Load

With the terms of the exact series solution taken as trial functions, the method of point collocation was used to calculate the large deflection of a circular plate. The axisymmetrical bending formulae were developed for the calculation of a circular plate subjected to polynomial distributed loads, a concentrated load at the center, uniform radial forces and moments along the edge or their combinations. The support may be elastic. The buckling load was calculated. Under action of uniformly distributed load, central load or their compound load, solutions were compared with those obtained by other methods. Buckling beyond critical thrust was compared with that calculated by the power series method. The method presented in this paper has advantages of wide convergent range, high precision and short computing time. Moreover, the computing time is nearly independent of the complexity of the loads.