Identification and quantitative prediction of large and superlarge mineral deposits of solid mineral resources using the mineral resource prediction theory and method with comprehensive information is carried out nati...Identification and quantitative prediction of large and superlarge mineral deposits of solid mineral resources using the mineral resource prediction theory and method with comprehensive information is carried out nationwide in China at a scale of 1∶5 000 000. Using deposit concentrated regions as the model units and concentrated mineralization anomaly regions as prediction units, the prediction is performed on GIS platform. The technical route and research method of locating large and superlarge mineral deposits and principle of compiling attribute table of independent variables and functional variables are proposed. Upon methodology study, the qualitative locating and quantitative predicting mineral deposits are carried out with quantitative theory Ⅲ and characteristic analysis, respectively, and the advantage and disadvantage of two methods are discussed. This research is significant for mineral resource prediction in ten provinces of western China.展开更多
Objective The Suoluogou gold depositin Muli County of Sichuan Province is located in the southern section of the GanziLitang suture zone(Fig.la),which is the largest gold deposit discovered in this suture zone in rece...Objective The Suoluogou gold depositin Muli County of Sichuan Province is located in the southern section of the GanziLitang suture zone(Fig.la),which is the largest gold deposit discovered in this suture zone in recent years.At present,the exploration of the Suoluogou gold deposit is still in progress,and the amount of resource is increasing.展开更多
The Phlaythong large iron deposit in Shampasak of southern Laos,is located in the Kon Tum microblock (Fig.1A),central-southern part of the Indo-China block,and the geographic coordinate of the central mining area is...The Phlaythong large iron deposit in Shampasak of southern Laos,is located in the Kon Tum microblock (Fig.1A),central-southern part of the Indo-China block,and the geographic coordinate of the central mining area is 14°43′04″ N and 106°07′02″ E.展开更多
Located in Western Hubei Province,this deposit is a large-scale Ag-V ore deposit,listed among the fifth type of silver deposit in China.1 Geological Characteristics It lies in the NE sector of the Yangtze flat of the ...Located in Western Hubei Province,this deposit is a large-scale Ag-V ore deposit,listed among the fifth type of silver deposit in China.1 Geological Characteristics It lies in the NE sector of the Yangtze flat of the Yangtze paraplatform.There are sporadically magmatic rocks and fold basement made up of upper Archaeozoicmiddle and lower Proterozoic strata.The sedimentary cover consists of Sinian-lower Paleozoic marine sediments,Mesozoic-Cenozoic intercalated marine and nonmarine sediments or nonmarine sediments.展开更多
The paper focuses on geological and geochemical evidence of thermal brine genesis of Pb Zn deposits in Wuqia district, Xinjiang. The results suggest that the known Pb Zn deposits, such as Wulagen, are thermal brine ge...The paper focuses on geological and geochemical evidence of thermal brine genesis of Pb Zn deposits in Wuqia district, Xinjiang. The results suggest that the known Pb Zn deposits, such as Wulagen, are thermal brine genesis, which is supported by the features of tectonic setting, magma and regional metamorphism, and the characteristics of trace element distribution in strata and redistribution in the ore forming process, the REE patterns and their main parameters of main type ores, the composition features and the source indicators of Pb, S isotopes. Ore forming conditions of superlarge Pb Zn deposits studies show that there exists tectonic and sources setting of Jinding type superlarge Pb Zn deposits in this area. Five Pb Zn ore belts and central uplift belts discovered lately have not only confirmed that the genesis of Wulagen Pb Zn deposits is thermal genesis, but also further proved that there exists tectonic and source setting of Jinding type superlarge Pb Zn deposit in the study area. Mineral deposit model was described and prospecting potentiality of superlarge Pb Zn deposit and their significance were discussed.展开更多
Before intruding, primary magmas have undergone liquation and partial crystallization atdepth; as a result the magmas are partitioned into barren magma, ore-bearing magma, ore-richmagma and ore magma, which then ascen...Before intruding, primary magmas have undergone liquation and partial crystallization atdepth; as a result the magmas are partitioned into barren magma, ore-bearing magma, ore-richmagma and ore magma, which then ascend and are injected into the present locations once ormultiple times, thus forming ore deposits. The above-mentioned mineralizing process is knownas deep-seated magmatic liquation-injection mineralization. The volume of the barren magma isgenerally much larger than those of the ore-bearing magma, ore-rich magma and ore magma. Inthe ascending process, most of the barren magma intrudes into different locations or outpoursonto the ground surface, forming intrusions or lava flows. The rest barren magma, ore-bearingmagma, ore-rich magma and ore magma may either multiple times inject into the same space inwhich rocks and ores are formed or separately inject into different spaces in which rocks and oresare formed. The intrusions containing such deep-seated magmatic liquation-injection depositshave a much smaller volume, greater ore potential and higher ore grade than that of in-situmagmatic liquation deposits. Consequently this mineralizing process results in the formation oflarge deposits in small intrusions.展开更多
The late Permian Emeishan large igneous province (EL1P) covers -0.3× 10-6 kmL of the western margin of the Yangtze Block and Tibetan Plateau with displaced, correlative units in northern Vietnam (Song Da zone...The late Permian Emeishan large igneous province (EL1P) covers -0.3× 10-6 kmL of the western margin of the Yangtze Block and Tibetan Plateau with displaced, correlative units in northern Vietnam (Song Da zone). The ELIP is of particular interest because it contains numerous world-class base metal deposits and is contemporaneous with the late Capitanian (-260 Ma) mass extinction. The flood basalts are the signature feature of the ELIP but there are also ultramafic and silicic volcanic rocks and layered mafic- ultramafic and silicic plutonic rocks exposed. The EL1P is divided into three nearly concentric zones (i.e. inner, middle and outer) which correspond to progressively thicker crust from the inner to the outer zone. The eruptive age of the ELIP is constrained by geological, paleomagnetic and geochronological evidence to an interval of 〈3 Ma. The presence of picritic rocks and thick piles of flood basalts testifies to high temperature thermal regime however there is uncertainty as to whether these magmas were derived from the subcontinental lithospheric mantle or sub-lithospheric mantle (i.e. asthenosphere or mantle plume) sources or both. The range of Sr (Isr ≈ 0.7040-0.7132), Nd (ENd(t) ≈ -14 tO +8), Pb (206-pb/204-pb1 ≈ 17.9-20.6) and Os (Yos ≈ -5 to +11) isotope values of the ultramafic and mafic rocks does not permit a conclusive answer to ultimate source origin of the primitive rocks but it is clear that some rocks were affected by crustal contamination and the presence of near-depleted isotope compo- sitions suggests that there is a sub-lithospheric mantle component in the system. The silicic rocks are derived by basaltic magmas/rocks through fractional crystallization or partial melting, crustal melting or by interactions between mafic and crustal melts. The formation of the Fe-Ti-V oxide-ore deposits is probably due to a combination of fractional crystallization of Ti-rich basalt and fluxing of C02-rich fluids whereas the Ni-Cu-(PGE) deposits are related to crystallization and crustal contamination of mafic or ultramafic magmas with subsequent segregation of a sulphide-rich portion. The ELIP is considered to be a mantle plume-derived LIP however the primary evidence for such a model is less convincing (e.g. uplift and geochemistry) and is far more complicated than previously suggested but is likely to be derived from a relatively short-lived, plume-like upwelling of mantle-derived magmas. The emplacement of the ELIP may have adversely affected the short-term environmental conditions and contributed to the decline in biota durin~ the late Caoitanian.展开更多
The Jiaodong Peninsula is the largest repository of gold in China based on the production in history. It covers less than 0.2% of China's territory, but production of gold accounts for about one fourth of the whol...The Jiaodong Peninsula is the largest repository of gold in China based on the production in history. It covers less than 0.2% of China's territory, but production of gold accounts for about one fourth of the whole country. Thus, the Jiaodong Peninsula is a typical area or case of large-scale metallogenesis and a large clusters of mineral deposits in China. It is characterized by the large clusters of gold deposits in large scale, high reserve and short mineralizing stage. In this study, we suggest that the eastern boundary of the large clusters of gold deposits is as same as that of North China Block, the gold deposits are hosted by Archean metamorphic rocks or Mesozoic granites, and the age of gold mineralization is 121.6 to 122.7 Ma. Gold and related ore-forming materials are derived from multisources, i.e. Archean metamorphic rocks, granites and intermediate-mafic dikes, especially, intermediate-mafic dikes and calc-alkaline granites. The metallogenic geodynamic process is constrained by the tectonic evolution of eastern North China Block during Late Mesozoic, and it is the result of the interaction between mantle and crust as the boundary plates are playing role on the block.展开更多
This paper deals with the geology and geochemistry of the Gacun and Laochang large-sized marine volcanic rock-type Ag deposits in the Sanjiang(Tri-River) area of southwestern China and of the continental volcanic-subv...This paper deals with the geology and geochemistry of the Gacun and Laochang large-sized marine volcanic rock-type Ag deposits in the Sanjiang(Tri-River) area of southwestern China and of the continental volcanic-subvolcanic rock-type Ag deposits in the Tianshan area of Xinjiang, and in the East area,China. It is considered that the marine volcanic rock-type Ag deposits occur mainly in the second-ordered volcano-sedimentary basins developed in island-arc and rift tectonic environments.The Ag deposits show an obvious zonation,with vein-network mineralization in the lower parts and hot water sedimentary rock-hosted stratified mineralization in the upper parts. From the Earth抯 surface downwards the ore-forming elements follows the order of As(Au)→Ag,Pb,Zn→Cu. The whole rock Rb-Sr isotopic isochron age of layered orebodies in the Gacun deposit is 204±14 Ma, indicating that the main stage of mineralization is Late Triassic in age. The continental volcanic-subvolcanic (porphyry) rock-type Ag deposits were formed later than the country rocks. The ores exhibit disseminated, veinlet disseminated, network and lumped structures. In addition, this study also deals with the geochemical characteristics of the continental volcanic-subvolcanic rock-type Ag deposits and the relations between Ag deposits or silver itself and fluorite, halogen-family elements and manganese.展开更多
Economic concentrations of Fe–Ti oxides occurring as massive layers in the middle and upper parts of the Hongge intrusion are different from other layered intrusions(Panzhihua and Baima) in the Emeishan large igneous...Economic concentrations of Fe–Ti oxides occurring as massive layers in the middle and upper parts of the Hongge intrusion are different from other layered intrusions(Panzhihua and Baima) in the Emeishan large igneous province, SW China. This paper reports on the new mineral compositions of magnetite and ilmenite for selected cumulate rocks and clinopyroxene and plagioclase for basalts. We use these data to estimate the oxidation state of parental magmas and during ore formation to constrain the factors leading to the abundant accumulation of Fe–Ti oxides involved with the Hongge layered intrusion. The results show that the oxygen fugacities of parental magma are in the range of FMQ-1.56 to FMQ+0.14, and the oxygen fugacities during the ore formation of the Fe–Ti oxides located in the lower olivine clinopyroxenite zone(LOZ) and the middle clinopyroxenite zone(MCZ) of the Hongge intrusion are in the range of FMQ-1.29 to FMQ-0.2 and FMQ-0.49 to FMQ+0.82, respectively.The MELTS model demonstrates that, as the oxygen fugacity increases from the FMQ-1 to FMQ+1, the proportion of crystallization magnetite increases from 11 % to 16 % and the crystallization temperature of the Fe–Ti oxides advances from 1134 to 1164 °C. The moderate oxygen fugacities for the Hongge MCZ indicate that the oxygen fugacity was not the only factor affecting the crystallization of Fe–Ti oxides. We speculated that theinitial anhydrous magma that arrived at the Hongge shallow magma chamber became hydrous by attracting the H_2O of the strata. In combination with increasing oxygen fugacities from the LOZ(FMQ-1.29 to FMQ-0.2) to the MCZ(FMQ-0.49 to FMQ+0.82), these two factors probably account for the large-scale Fe–Ti oxide ore layers in the MCZ of the Hongge intrusion.展开更多
The introduction of a practical solar cell by Bell Laboratory,which had an efficiency of approximately 6%,signified photovoltaic technology as a potentially viable energy source.Continuous efforts have been made to in...The introduction of a practical solar cell by Bell Laboratory,which had an efficiency of approximately 6%,signified photovoltaic technology as a potentially viable energy source.Continuous efforts have been made to increase power conversion efficiency(PCE).In the present review,the advances made in solar cells(SCs)are summarized.Material and device engineering are described for achieving enhanced light absorption,electrical properties,stability and higher PCE in SCs.The strategies in materials and coating techniques for large area deposition are further elaborated,which is expected to be helpful for realizing high-efficiency SCs.The methods of lightharvesting in SCs via anti-reflecting coatings,surface texturing,patterned growth of nanostructure,and plasmonics are discussed.Moreover,progress in mechanical methods that are used for sun tracking are elaborated.The assistance of the above two protocols in maximizing the power output of SCs are discussed in detail.Finally,further research efforts needed to overcome roadblocks in commercialization were highlighted and perspectives on the future development of this rapidly advancing field are offered.展开更多
文摘Identification and quantitative prediction of large and superlarge mineral deposits of solid mineral resources using the mineral resource prediction theory and method with comprehensive information is carried out nationwide in China at a scale of 1∶5 000 000. Using deposit concentrated regions as the model units and concentrated mineralization anomaly regions as prediction units, the prediction is performed on GIS platform. The technical route and research method of locating large and superlarge mineral deposits and principle of compiling attribute table of independent variables and functional variables are proposed. Upon methodology study, the qualitative locating and quantitative predicting mineral deposits are carried out with quantitative theory Ⅲ and characteristic analysis, respectively, and the advantage and disadvantage of two methods are discussed. This research is significant for mineral resource prediction in ten provinces of western China.
基金financially supported by the Program of the China Geological Survey (grant No.121201010000150013 and 12120114012501)
文摘Objective The Suoluogou gold depositin Muli County of Sichuan Province is located in the southern section of the GanziLitang suture zone(Fig.la),which is the largest gold deposit discovered in this suture zone in recent years.At present,the exploration of the Suoluogou gold deposit is still in progress,and the amount of resource is increasing.
基金financially supported by the Special fund for Foreign Mineral Resources Risk Exploration (Grant No.Sichuan Financial Investment (2010)331)China Geological Survey (Grant No.12120114012501)
文摘The Phlaythong large iron deposit in Shampasak of southern Laos,is located in the Kon Tum microblock (Fig.1A),central-southern part of the Indo-China block,and the geographic coordinate of the central mining area is 14°43′04″ N and 106°07′02″ E.
文摘Located in Western Hubei Province,this deposit is a large-scale Ag-V ore deposit,listed among the fifth type of silver deposit in China.1 Geological Characteristics It lies in the NE sector of the Yangtze flat of the Yangtze paraplatform.There are sporadically magmatic rocks and fold basement made up of upper Archaeozoicmiddle and lower Proterozoic strata.The sedimentary cover consists of Sinian-lower Paleozoic marine sediments,Mesozoic-Cenozoic intercalated marine and nonmarine sediments or nonmarine sediments.
基金TheNationalNaturalScienceFoundationofChina (No .4 0 0 72 0 32 )
文摘The paper focuses on geological and geochemical evidence of thermal brine genesis of Pb Zn deposits in Wuqia district, Xinjiang. The results suggest that the known Pb Zn deposits, such as Wulagen, are thermal brine genesis, which is supported by the features of tectonic setting, magma and regional metamorphism, and the characteristics of trace element distribution in strata and redistribution in the ore forming process, the REE patterns and their main parameters of main type ores, the composition features and the source indicators of Pb, S isotopes. Ore forming conditions of superlarge Pb Zn deposits studies show that there exists tectonic and sources setting of Jinding type superlarge Pb Zn deposits in this area. Five Pb Zn ore belts and central uplift belts discovered lately have not only confirmed that the genesis of Wulagen Pb Zn deposits is thermal genesis, but also further proved that there exists tectonic and source setting of Jinding type superlarge Pb Zn deposit in the study area. Mineral deposit model was described and prospecting potentiality of superlarge Pb Zn deposit and their significance were discussed.
文摘Before intruding, primary magmas have undergone liquation and partial crystallization atdepth; as a result the magmas are partitioned into barren magma, ore-bearing magma, ore-richmagma and ore magma, which then ascend and are injected into the present locations once ormultiple times, thus forming ore deposits. The above-mentioned mineralizing process is knownas deep-seated magmatic liquation-injection mineralization. The volume of the barren magma isgenerally much larger than those of the ore-bearing magma, ore-rich magma and ore magma. Inthe ascending process, most of the barren magma intrudes into different locations or outpoursonto the ground surface, forming intrusions or lava flows. The rest barren magma, ore-bearingmagma, ore-rich magma and ore magma may either multiple times inject into the same space inwhich rocks and ores are formed or separately inject into different spaces in which rocks and oresare formed. The intrusions containing such deep-seated magmatic liquation-injection depositshave a much smaller volume, greater ore potential and higher ore grade than that of in-situmagmatic liquation deposits. Consequently this mineralizing process results in the formation oflarge deposits in small intrusions.
基金supported by NSC grant 102-2628-M-003-001-MY4 to JGS
文摘The late Permian Emeishan large igneous province (EL1P) covers -0.3× 10-6 kmL of the western margin of the Yangtze Block and Tibetan Plateau with displaced, correlative units in northern Vietnam (Song Da zone). The ELIP is of particular interest because it contains numerous world-class base metal deposits and is contemporaneous with the late Capitanian (-260 Ma) mass extinction. The flood basalts are the signature feature of the ELIP but there are also ultramafic and silicic volcanic rocks and layered mafic- ultramafic and silicic plutonic rocks exposed. The EL1P is divided into three nearly concentric zones (i.e. inner, middle and outer) which correspond to progressively thicker crust from the inner to the outer zone. The eruptive age of the ELIP is constrained by geological, paleomagnetic and geochronological evidence to an interval of 〈3 Ma. The presence of picritic rocks and thick piles of flood basalts testifies to high temperature thermal regime however there is uncertainty as to whether these magmas were derived from the subcontinental lithospheric mantle or sub-lithospheric mantle (i.e. asthenosphere or mantle plume) sources or both. The range of Sr (Isr ≈ 0.7040-0.7132), Nd (ENd(t) ≈ -14 tO +8), Pb (206-pb/204-pb1 ≈ 17.9-20.6) and Os (Yos ≈ -5 to +11) isotope values of the ultramafic and mafic rocks does not permit a conclusive answer to ultimate source origin of the primitive rocks but it is clear that some rocks were affected by crustal contamination and the presence of near-depleted isotope compo- sitions suggests that there is a sub-lithospheric mantle component in the system. The silicic rocks are derived by basaltic magmas/rocks through fractional crystallization or partial melting, crustal melting or by interactions between mafic and crustal melts. The formation of the Fe-Ti-V oxide-ore deposits is probably due to a combination of fractional crystallization of Ti-rich basalt and fluxing of C02-rich fluids whereas the Ni-Cu-(PGE) deposits are related to crystallization and crustal contamination of mafic or ultramafic magmas with subsequent segregation of a sulphide-rich portion. The ELIP is considered to be a mantle plume-derived LIP however the primary evidence for such a model is less convincing (e.g. uplift and geochemistry) and is far more complicated than previously suggested but is likely to be derived from a relatively short-lived, plume-like upwelling of mantle-derived magmas. The emplacement of the ELIP may have adversely affected the short-term environmental conditions and contributed to the decline in biota durin~ the late Caoitanian.
基金by the Ministry of Science and Technology of China (Grant No.G1999043207), Chinese Academy of Sciences (Grant No. KZCX1-07) and National Natural Science Foundation of China (Grant No. 49872064).
文摘The Jiaodong Peninsula is the largest repository of gold in China based on the production in history. It covers less than 0.2% of China's territory, but production of gold accounts for about one fourth of the whole country. Thus, the Jiaodong Peninsula is a typical area or case of large-scale metallogenesis and a large clusters of mineral deposits in China. It is characterized by the large clusters of gold deposits in large scale, high reserve and short mineralizing stage. In this study, we suggest that the eastern boundary of the large clusters of gold deposits is as same as that of North China Block, the gold deposits are hosted by Archean metamorphic rocks or Mesozoic granites, and the age of gold mineralization is 121.6 to 122.7 Ma. Gold and related ore-forming materials are derived from multisources, i.e. Archean metamorphic rocks, granites and intermediate-mafic dikes, especially, intermediate-mafic dikes and calc-alkaline granites. The metallogenic geodynamic process is constrained by the tectonic evolution of eastern North China Block during Late Mesozoic, and it is the result of the interaction between mantle and crust as the boundary plates are playing role on the block.
文摘This paper deals with the geology and geochemistry of the Gacun and Laochang large-sized marine volcanic rock-type Ag deposits in the Sanjiang(Tri-River) area of southwestern China and of the continental volcanic-subvolcanic rock-type Ag deposits in the Tianshan area of Xinjiang, and in the East area,China. It is considered that the marine volcanic rock-type Ag deposits occur mainly in the second-ordered volcano-sedimentary basins developed in island-arc and rift tectonic environments.The Ag deposits show an obvious zonation,with vein-network mineralization in the lower parts and hot water sedimentary rock-hosted stratified mineralization in the upper parts. From the Earth抯 surface downwards the ore-forming elements follows the order of As(Au)→Ag,Pb,Zn→Cu. The whole rock Rb-Sr isotopic isochron age of layered orebodies in the Gacun deposit is 204±14 Ma, indicating that the main stage of mineralization is Late Triassic in age. The continental volcanic-subvolcanic (porphyry) rock-type Ag deposits were formed later than the country rocks. The ores exhibit disseminated, veinlet disseminated, network and lumped structures. In addition, this study also deals with the geochemical characteristics of the continental volcanic-subvolcanic rock-type Ag deposits and the relations between Ag deposits or silver itself and fluorite, halogen-family elements and manganese.
基金supported by the National 973 Program of China (2012CB416804 and 2014CB440906)CAS/SAFEA International Partnership Program for Creative Research Teams (KZZD-EW-TZ-20)National Natural Sciences Foundations of China (41473051) to Tao yan
文摘Economic concentrations of Fe–Ti oxides occurring as massive layers in the middle and upper parts of the Hongge intrusion are different from other layered intrusions(Panzhihua and Baima) in the Emeishan large igneous province, SW China. This paper reports on the new mineral compositions of magnetite and ilmenite for selected cumulate rocks and clinopyroxene and plagioclase for basalts. We use these data to estimate the oxidation state of parental magmas and during ore formation to constrain the factors leading to the abundant accumulation of Fe–Ti oxides involved with the Hongge layered intrusion. The results show that the oxygen fugacities of parental magma are in the range of FMQ-1.56 to FMQ+0.14, and the oxygen fugacities during the ore formation of the Fe–Ti oxides located in the lower olivine clinopyroxenite zone(LOZ) and the middle clinopyroxenite zone(MCZ) of the Hongge intrusion are in the range of FMQ-1.29 to FMQ-0.2 and FMQ-0.49 to FMQ+0.82, respectively.The MELTS model demonstrates that, as the oxygen fugacity increases from the FMQ-1 to FMQ+1, the proportion of crystallization magnetite increases from 11 % to 16 % and the crystallization temperature of the Fe–Ti oxides advances from 1134 to 1164 °C. The moderate oxygen fugacities for the Hongge MCZ indicate that the oxygen fugacity was not the only factor affecting the crystallization of Fe–Ti oxides. We speculated that theinitial anhydrous magma that arrived at the Hongge shallow magma chamber became hydrous by attracting the H_2O of the strata. In combination with increasing oxygen fugacities from the LOZ(FMQ-1.29 to FMQ-0.2) to the MCZ(FMQ-0.49 to FMQ+0.82), these two factors probably account for the large-scale Fe–Ti oxide ore layers in the MCZ of the Hongge intrusion.
基金supported by an NPRP grant from Qatar National Research Fund under the grant number NPRP12S-0131-190030.
文摘The introduction of a practical solar cell by Bell Laboratory,which had an efficiency of approximately 6%,signified photovoltaic technology as a potentially viable energy source.Continuous efforts have been made to increase power conversion efficiency(PCE).In the present review,the advances made in solar cells(SCs)are summarized.Material and device engineering are described for achieving enhanced light absorption,electrical properties,stability and higher PCE in SCs.The strategies in materials and coating techniques for large area deposition are further elaborated,which is expected to be helpful for realizing high-efficiency SCs.The methods of lightharvesting in SCs via anti-reflecting coatings,surface texturing,patterned growth of nanostructure,and plasmonics are discussed.Moreover,progress in mechanical methods that are used for sun tracking are elaborated.The assistance of the above two protocols in maximizing the power output of SCs are discussed in detail.Finally,further research efforts needed to overcome roadblocks in commercialization were highlighted and perspectives on the future development of this rapidly advancing field are offered.