期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
Particle size segregation in hopper at a bell-less top blast furnace with parallel hoppers
1
作者 KOU Mingyin,WU Shengli,XU Jian,FU Changliang,LIU Chengsong,GUO Xinying and DU Kaiping School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China 《Baosteel Technical Research》 CAS 2010年第S1期14-,共1页
Owing to a certain angle existing between a belt conveyor and the parallel hoppers,and the hoppers localizing away from the centerlines of a blast furnace,particles size segregation is likely to happen in a bell-less ... Owing to a certain angle existing between a belt conveyor and the parallel hoppers,and the hoppers localizing away from the centerlines of a blast furnace,particles size segregation is likely to happen in a bell-less top blast furnace with parallel hoppers.Mastering the law of particles size segregation in hoppers could help to choose better charging parameters and optimize production and technical indices.As for the previous works on burden segregation at a bell-less top blast furnace with parallel hoppers,more attention was paid to the falling point segregation and the circumferential mass flow segregation while charging from the tilting chute,but ignoring the particle size segregation in burden hoppers as burden falls from a belt conveyor,which is the right basis of analyzing the former,and plays a significant role in controlling the gas distribution in the blast furnace.The present work takes ternary mixtures of coke in three different particle sizes to simulate the size segregation of the coke charged into the hoppers by experiments.The effect of the main striking point on size segregation is also investigated.The research shows that there exists a good linear relation between segregation coefficient k and the dimensionless main striking point when using the equation C = C_0~k to express the degree of size segregation in hoppers.The linear relation is proposed for the first time and provides a new way to predict the size segregation in hoppers,which forms a theoretical basis and technical support for reducing the size segregation degree in hoppers. 展开更多
关键词 blast furnace bell-less top with parallel hoppers particle size segregation in hoppers
下载PDF
宝钢1号高炉并罐布料偏析的操业应对 被引量:4
2
作者 王俊 徐辉 朱锦明 《炼铁》 北大核心 2015年第4期4-7,共4页
针对宝钢1号高炉并罐无料钟布料过程中发生明显的炉料偏析现象,基于理论分析和现场测试结果,提出了有针对性的操业应对措施,得到了较为理想的煤气流分布,较大程度地减小了布料偏析对炉况的影响。并认识到,减小料罐内炉料粒度的偏析是基... 针对宝钢1号高炉并罐无料钟布料过程中发生明显的炉料偏析现象,基于理论分析和现场测试结果,提出了有针对性的操业应对措施,得到了较为理想的煤气流分布,较大程度地减小了布料偏析对炉况的影响。并认识到,减小料罐内炉料粒度的偏析是基础,可通过调整挡板位置和切换溜槽角度的方法实现;适当增大矿批,可减少并罐布料过程中心喉管的蛇形偏析;通过优化布料模式,并缩短切罐和换向周期,可有效降低并罐布料偏析对煤气流分布偏析的影响。 展开更多
关键词 特大型高炉 并罐无料钟 布料偏析 煤气流分布
下载PDF
大型高炉并罐无料钟炉顶的特点与选择 被引量:4
3
作者 张卫东 汪小龙 《炼铁》 北大核心 2012年第3期16-19,共4页
对三种类型的并罐无料钟炉顶形式的结构特点进行了比较分析,得出四罐无料钟炉顶能够实现多料种装料、分级入炉布料等方式,具有偏析小、调剂手段灵活、设备互换性强、可在线修复等诸多优点,更适合则代大型高炉采用分级入炉工艺的冶炼要求。
关键词 大型高炉 分级人炉 并罐无料钟 四罐无料钟
下载PDF
武钢8号高炉新两罐无料钟炉顶技术 被引量:4
4
作者 刘菁 《炼铁》 北大核心 2010年第3期9-12,共4页
结合武钢的原燃料条件和高炉操作习惯,从无料钟炉顶设备的选型、新两罐炉顶设备的组成及特性、有关炉顶系统工艺设计、炉顶框架和平台的设计、炉顶附属设施的设计等方面,对武钢8号高炉新两罐无料钟炉顶技术的特点进行了阐述。
关键词 大型高炉 无料钟炉顶 料罐 设计
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部