Analysis of Detection and Monitoring Technology in the Construction and Maintenance of Large Bridges

Currently,there is significant attention placed on the construction,management,and maintenance of large service bridges.Within the realm of bridge maintenance management,the utilization of detection and monitoring technology is indispensable.By employing these technologies,we can effectively identify any structural defects within the bridge,promptly uncover unknown risks,proactively establish maintenance strategies,and prevent the rapid deterioration of bridge conditions.This article aims to explore the advantages of applying bridge monitoring and testing technology and to discuss various methods for implementing detection and monitoring technology throughout the construction,management,and maintenance phases of large bridges.Ultimately,this will contribute to ensuring the safe operation of large bridges.

Development of steel dampers for bridges to allow large displacement through a vertical free mechanism

Isolation bearings and dampers are often installed between piers and superstructures to reduce the seismic responses of bridges under large earthquakes. This paper presents a novel steel damper for bridges. The damper employs steel plates as energy dissipation components, and adopts a vertical free mechanism to achieve a large deformation capacity. Quasi-static tests using displacement-controlled cyclic loading and numerical analyses using a finite element program called ABAQUS are conducted to investigate the behavior of the damper, and a design methodology is proposed based on the tests and numerical analyses. Major conclusions obtained from this study are as follows： （1） the new dampers have stable hysteresis behavior under large displacements; （2） finite element analyses are able to simulate the behavior of the damper with satisfactory accuracy; and （3） simplified design methodology of the damper is effective.

Improved methods for decreasing stresses of concrete slab of large-span through tied-arch composite bridge

Mechanical behavior of concrete slab of large-span through tied-arch composite bridge was investigated by finite element analysis (FEA). Improved methods to decrease concrete stresses were discussed based on comparisons of different deck schemes, construction sequences and measures, and ratios of reinforcement. The results show that the mechanical behavior of concrete slab gets worse with the increase of composite regions between steel beams and concrete slab. The deck scheme with the minimum composite region is recommended on condition that both strength and stiffness of the bridge meet design demands under service loads. Adopting in-situ-place construction method, concrete is suggested to be cast after removing the full-supported frameworks under the bridge. Thus, the axial tensile force of concrete slab caused by the first stage dead load is eliminated. Preloading the bridge before concrete casting and removing the load after the concrete reaching its design strength, the stresses of concrete slab caused by the second stage dead load and live load are further reduced or even eliminated. At last, with a high ratio of reinforcement more than 3%, the concrete stresses decrease obviously.

Sensor placement of long-term health monitoring for large bridges based on the real-time correction of finite element model

The process of optimized placement of long-term health monitoring sensors for large bridges generally begins with finite element models, but there will arise great discrepancies between theoretically-calculated results and actual measurements.Therefore, rectified finite element models need to be rectified by virtue of model rectifying technology. Firstly, the result of construction monitoring and finished state load test is used to real-time modification of finite element model. Subsequently, an accurate finite element model is established. Secondly, the optimizing the layout of sensor with following orthogonality guarantees orthogonal property and linear independence for the measured data. Lastly, the effectiveness and feasibility of method in the paper is tested by real-time modifying finite element model and optimizing the layout of sensor for Nujiang Bridge.

Rolling Fatigue Test of Large-Sized UHPC Member for Cable Stayed Bridge

Recently, research strives to apply Ultra High Performance Concrete (UHPC) to large-sized structures owing to its remarkable mechanical performance and durability compared to normal concrete. The Korea Institute of Construction Technology proposed SuperBridge800, an edge girder type UHPC cable stayed bridge with central span of 800 m, through its detailed design. The bridge is designed to be erected through the connection of precast UHPC segments. The precast UHPC segment is monolithically composed of one ribbed deck slab and edge girders at each side. The connection between the precast segments is achieved by steel bars at the edge girders and by UHPC cast-in-place wet joint at the slab. Despite of the outstanding mechanical performance of UHPC, the fabrication of large-sized members is a difficult task since UHPC hardens faster than normal concrete and requires a special curing process. Therefore, the constructability of large-sized UHPC segment should be secured to achieve SuperBridge800. Besides, the performance of the connection between segments should also be guaranteed, especially in terms of the fatigue performance of the UHPC cast-in-place joint, which constitutes a weak point. To that goal, two half-scaled UHPC segments are manufactured and the constructability is examined by fabricating a large-sized UHPC member connected with respect to the design conditions. This study conducts rolling fatigue test on the so-fabricated large-sized UHPC member. Rolling fatigue test is carried out up to 2 million cycles considering actual vehicle load at each center and quarter points of the member. The test results confirm that the service limit state is satisfied.

Analysis on the Structural Type of Large-span Steel Truss Bridge Spe­cially Designed for Cables

When the installation of cables and pipelines needs to go across rivers,bridges are usually adopted to support the cables and pipelines for crossing the rivers.The measure can make full use of the space resources and have no effect on the flow pattern of rivers.For this reason,analysis on the structural-type design of a large-span steel truss bridge specially used for cables has been performed.The numerical results indicate that the stayed-cable bridge with steel truss beam and concrete main tower has better performance and improved structural type caparisoned with that of the beam and arch bridges,and the construction of the major beam can be without the temporary support.

Bridging large gaps in the injured spinal cord: mechanical and biochemical tissue adaptation

Incidence and consequences of spinal cord injuries： World- wide, every year 250,000-500,000 people suffer from spinal cord injury （SCI; www.who.int, 2013）. Traumatic lesions of the spinal cord lead to primary and secondary injury mechanisms, which result in axon damage, loss of signal conduction, demyelination of axons and long-lasting deficits in motor and sensory func- tion. The extent of the damage and the subsequent functional loss depend on the spinal level and the severity of the primary injury. Furthermore, pathophysiological and pathomorpholog- ical responses in acute and chronic SCI share similar but also different requirements for treatment.

Load Reduction Test Method of Similarity Theory and BP Neural Networks of Large Cranes

Static load tests are an important means of supervising and detecting a crane＇s lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes.

The design philosophy and bridge＇s technical innovation of Hong Kong- Zhuhai-Macao Bridge

This article introduces the project overview, construction goal and design philosophy of Hong Kong- Zhuhai-Macao Bridge. Based on large scale, factory production, standardization and assemble line, the innova- tive concept is taken as the general principle for design with the emphasis on description of the new material, new technology, new construction method and new equipment used in the design. The application of innovative technology has provided a solid foundation and favorable guarantee for project quality and design service

Seismic response analysis of continuous rigid frame bridge considering canyon topography effects under incident SV waves

To evaluate the importance of the canyon topography effects on large structures, based on a rigid frame bridge across a 137-m-deep and 600-m-wide canyon, the seismic response of the canyon site is analyzed using a two-dimensional finite element model under different seismic SV waves with the assumptions of vertical incidence and oblique incidence to obtain the ground motions, which are used as the excitation input on the pier foundations of the bridge with improved large mass method. The results indicate that canyon topography has significant influences on the ground motions in terms of inci- dent angle. The peak ground acceleration values vary greatly from the bottom of the canyon to the upper comers. Under ver- tical incident SV waves, at the upper comers of canyon the peak ground accelerations greatly increase; whereas the peak ground accelerations diminish at the bottom comers of canyon. Under oblique incident SV waves, the shaking of the canyon slope perpendicular to the incidence direction is much more severe than that of the opposite side of canyon. And the ground surface has been characterized by larger deformations in the case of oblique incident waves. It is also concluded that the low piers and frame of the continuous rigid frame bridge ape more sensitive to the multi-support seismic excitations than the flexible high piers. The canyon topography as well as the oblique incidence of the waves brings the continuous rigid frame bridge severe responses, which should be taken into account in bridge design.

Research on the special lifting devices for steel box girders of Sutong Bridge

Sutong Bridge is a cable-stayed bridge with a steel box girder and a main span of 1 088 m.The steel box girder of main span includes five portions:back span large unit,large block of pylon,standard girder,back span closure girder and middle span closure girder.Each back span large unit is fabricated by welding several deck segments together in factory,and is erected by floating crane.As navigational clearance of the main bridge is high,the traditional truss lifting device can't satisfy the requirement of domestic lifting cranes for this kind of lifting height and weight.Hence,a kind of lighter lifting device for the erection of back span large units was accepted for this bridge.In this paper,the design and use of this lifting device is introduced.The upper structure used lifting gantry to install the standard girder segment by cantilever method.Because the bridge's navigation clearance is high,and the girder segment is wide and heavy,the meteorology and hydrology condition of the bridge district is abominable,and the requirements of long cable girder side pull-in,structure and performance propose high request to the lifting gantry.In this paper,the design and use key point of long cable pull-in angle adjustment device integrate into lifting gantry is introduced.

Assessment of Turbulence Models on Bridge-Pier Scour Using Flow-3D

The main purpose of this paper is to analyze the influence of different turbulence flow models on scouring pit of bridge-pier. Flow-3D software is applied in line with the purpose. The key motivation for this study is to contribute to the Flow-3D software by means of some modification and adjustment in the sediment scour model and shallow water model. An assessment of turbulence model adopted with the parameters of the Melville experiment to estimate the maximum scour-depth was performed. In the simulation results, the alternate eddy formation and shedding were repeated while the Karman vortex street formed behind the pier for the large eddy simulation LES turbulence model is more realistic in the flow phenomenon. The results of the scour development of large eddy simulation (LES) turbulence model were found to be more satisfied than the Renormalized group (RNG) turbulence model and close to the prior experiment results. The simulated scour results were significantly different with the observed data collected from previous literature in the reason of some unsuitability of meshing method in Flow-3D software.

深水钢桁梁无承台特大桥无应力状态法合龙应用研究

深水区域钢桁梁特大桥无承台桩基施工需要特别考虑施工工艺及其受力体系控制。依托四川汉源兰家湾特大桥工程,基于无应力状态方法分析计算钢桁梁特大桥的无桩基承台施工技术以及合龙施工的若干力学研究。结果表明,通过搭建深水区域无承台的特大桥桩墩结合施工,在其上进行钢桁梁安装拼接的无应力状态法合龙施工可取得良好受力整体性效果。所述方法可解决在较深水流条件下的特大桥桩基施工与整体受力控制难题,可为类似工程提供技术参考和借鉴。

Safety Limitations of Large New-Built Seagoing Vessels Towed through Bridge Area

The safety limitation of large new-built seagoing ves- sel design and operation is investigated to ensure safety of the new vessels towed through bridge area. We analyze the maneuverabil- ity characteristics of a towing fleet, and develop a mathematical drift model of ship motion for the fleet. Based on this drift model and the hydro-meteorological conditions in bridge area, we pro- pose a method to systematically ascertain the safety limitations of water stages, current, wind, speed and visibility. This method is conducive to the safety of both navigation and bridges when large towing fleets transit through bridges.

大倾角钢箱提篮拱桥总体设计

考虑施工技术、经济性和景观效果等方面,陕西蔡家坡渭河特大桥主桥采用(35+210+35) m大倾角钢箱提篮拱桥。该桥采用摩擦摆和环向钢丝绳阻尼支座综合减隔震约束体系,以降低结构的地震响应。拱肋为单室等宽钢箱截面,采用主、副拱肋2条悬链线,主、副拱肋共面,设计为横向内倾20°的大倾角,在提高桥梁景观效果的同时,又有效提高了结构的整体稳定性;拱肋设钢-混结合段连接拱脚与混凝土拱座。桥面系采用自重较轻的正交异性钢桥面板结构。吊杆采用抗拉强度1 860 MPa的环氧柔性钢绞线。基础采用Φ2.5 m的钻孔灌注群桩,以抵抗软弱地质条件下荷载的竖向及水平作用力。该桥总体采用先梁后拱的施工方案。整体及局部有限元分析结果表明,桥梁结构力学性能均满足规范要求,设计安全可靠。

Large-signal modeling of three-phase dual active bridge converters for electromagnetic transient analysis in DC grids

The three-phase dual active bridge(3 p-DAB)converter is widely considered in next-generation DC grid applications.As for traditional AC grids,the successful integration of power electronic converters in DC grids requires accurate time-domain system-level studies.As demonstrated in the existing literature,the development and efficient implementation of large-signal models of 3 pDAB converters are not trivial.In this paper,a generalized average model is developed,which enables system-level simulation of DC grids with 3 p-DAB converters in electromagnetic transient type(EMT-type)programs.The proposed model is rigorously compared with alternative modeling techniques:ideal-model,switching-function and state-space averaging.It is concluded that the generalized average model provides an optimal solution when accuracy of transient response,reduction in computation time,and wideband response factors are considered.

静风荷载下大跨斜拉桥上无缝线路受力与变形

大跨度斜拉桥在自然风场中易因自身柔度特性发生位移变形。为研究静风荷载作用下大跨斜拉桥上CRTS(China Railway Track System)双块式无砟轨道无缝线路桥梁及轨道结构在空间三向的力学性能分布规律,参照某一四线预应力混凝土斜拉桥工程实例,基于有限元法建立了大跨斜拉桥上无缝线路精细化空间耦合模型,分析了横桥向静风荷载作用下桥梁体系及桥上轨道结构的力学性能。分析结果表明:桥梁及桥上轨道结构三向(应)力最大值基本分布在斜拉桥跨中及边墩附近;各结构三向(应)力中,底座板、桥梁结构纵向应力峰值最大,约为横向应力峰值的8倍,约为竖向应力峰值的7倍、15倍,轨道板结构表现为横向应力峰值最大,且与其余两向应力峰值之间差距较小;各结构三向位移中,横向、竖向位移均在跨中及附近达到最大值,纵向位移在斜拉桥边墩附近达到最大值,其中,横向位移峰值是其余两向位移峰值的20余倍;桥梁两侧构件竖向、纵向位移方向相反,即桥梁表现为静风作用下的倾覆、弯曲倾向。研究成果可为风环境中大跨斜拉桥上线路设计、维护检修以及健康监测提供理论依据。

大跨度桥梁钢桥面板跨尺度疲劳损伤评估方法

大跨度斜拉桥正交异性钢桥面板的顶板与纵肋焊接构造细节在车辆荷载作用下易产生疲劳损伤进而导致服役性能降低、影响行车安全。为评估大跨度桥梁钢桥面板的疲劳性能,提出基于细观损伤力学的大跨度钢桥疲劳损伤跨尺度评估方法;推导了基于细观损伤力学的钢桥面板疲劳损伤演化模型,在此基础上,结合实测交通数据,实现了基于Monte-Carlo法的随机车流模拟;最后,将提出的方法应用于一座大跨度三塔斜拉桥。研究结果表明,大跨度斜拉桥钢桥面板体系焊缝周围区域的累积疲劳损伤程度明显高于桥面板体系的其他部位;顶板与纵肋焊接构造细节的疲劳损伤累积呈现明显的非线性,预测的疲劳寿命远小于Miner线性疲劳损伤累积准则的结果。

双线大直径输水隧道建设对既有桥梁及桩基的影响分析

为准确分析双线大直径输水隧道下穿对既有桥梁结构的影响,构建桥梁-地层-桩基-盾构隧道高精度数值仿真模型,对桥梁桩基结构及盾构过程进行精细化模拟,结合基于智能算法的土层参数反演模型,获取更接近真实情况的土层参数,以提高数值模拟精度。结果表明:输水隧道盾构开挖引起的地表最大沉降量为15.01 mm,基于反演的地表变形计算结果与实际监测值的误差减少约70%;盾构隧道双线开挖会引起地表二次沉降变形,两条盾构隧道中间区域的地表二次沉降量最大,约占总沉降量的60%,最大二次沉降量为5.06 mm;隧道两侧的桩基受到影响较大,最大位移为10.03 mm,位于桩基顶部,而隧道开挖对桩基内应力分布影响较小,可以认为无影响。

震陷土层变化下变截面单、群桩动力响应差异

为研究地震动作用下震陷土层厚度不同时大直径变截面单桩与群桩基础的动力响应差异,依托厦门第二东通道翔安大桥,通过振动台模型试验,开展震陷土层厚度30、40、50 cm时,单桩与群桩基础桩周土震陷量、桩顶水平位移、桩身加速度及弯矩动力响应差异研究.结果表明:随着震陷层厚度增大,单桩与群桩基础桩周土震陷量、桩顶水平位移、桩身加速度及弯矩均逐渐增大,且加速度及弯矩在变截面处突变;同一震陷层厚度下,群桩基础桩周土震陷量较单桩大,但群桩基础加速度、桩顶水平位移及桩身弯矩均小于单桩.震陷场地桩基础设计时,应着重考虑变截面单桩与群桩动力响应差异,保证桩基础抗震性能.