Engineering shallow,large-span rock tunnels challenges deformation control and escalates construction costs.This study investigates the excavation compensation method(ECM)and its associated technologies to address the...Engineering shallow,large-span rock tunnels challenges deformation control and escalates construction costs.This study investigates the excavation compensation method(ECM)and its associated technologies to address these issues.Utilizing five key technologies,the ECM effectively modulates radial stress post-excavation,redistributes stress in the surrounding rock,and eliminates tensile stress at the excavation face.Pre-tensioning measures further enhance the rock’s residual strength,establishing a new stability equilibrium.Field tests corroborate the method’s effectiveness,demonstrating a crown settlement reduction of 3–8 mm,a nearly 50%decrease compared to conventional construction approaches.Additionally,material consumption and construction duration were reduced by approximately 30%–35%and 1.75 months per 100 m,respectively.Thus,the ECM represents a significant innovation in enhancing the stability and construction efficiency of large-span rock tunnels,marking a novel contribution to the engineering field.展开更多
The precise control of the shape of transversely stiffened suspended cable systems is crucial. However, existing form-finding methods primarily rely on iterative calculations that treat loads as fixed known conditions...The precise control of the shape of transversely stiffened suspended cable systems is crucial. However, existing form-finding methods primarily rely on iterative calculations that treat loads as fixed known conditions. These methods are inefficient and fail to accurately control shape results. In this study, we propose a form-finding method that analyzes the load response of models under different sag and stress levels, taking into account the construction process. To analyze the system, a structural finite element model was established in ANSYS, and geometric nonlinear analysis was conducted using the Newton-Raphson method. The form-finding analysis results demonstrate that the proposed method achieves precise control of shape, with a maximum shape error ranging from 0.33% to 0.98%. Furthermore, the relationships between loads and tension forces are influenced by the deformed shape of the structures, exhibiting significant geometric nonlinear characteristics. Meanwhile, the load response analysis reveals that the stress level of the self-equilibrium state in the transversely stiffened suspended cable system is primarily governed by strength criteria, while shape is predominantly controlled by stiffness criteria. Importantly, by simulating the initial tensioning process as an initial condition, this method solves for a counterweight that satisfies the requirements and achieves a self-equilibrium state with the desired shape. The shape of the self-equilibrium state is precisely controlled by simulating the construction process. Overall, this work presents a new method for analyzing the form-finding process of large-span transversely stiffened suspended cable system, considering the construction process which was often overlooked in previous studies.展开更多
With the purpose of making calculation more efficient in practical hydraulic simulations, an improved algorithm was proposed and was applied in the practical water distribution field. This methodology was developed by...With the purpose of making calculation more efficient in practical hydraulic simulations, an improved algorithm was proposed and was applied in the practical water distribution field. This methodology was developed by expanding the traditional loop-equation theory through utilization of the advantages of the graph theory in efficiency. The utilization of the spanning tree technique from graph theory makes the proposed algorithm efficient in calculation and simple to use for computer coding. The algorithms for topological generation and practical implementations are presented in detail in this paper. Through the application to a practical urban system, the consumption of the CPU time and computation memory were decreased while the accuracy was greatly enhanced compared with the present existing methods.展开更多
Mechanical behavior of concrete slab of large-span through tied-arch composite bridge was investigated by finite element analysis (FEA). Improved methods to decrease concrete stresses were discussed based on compariso...Mechanical behavior of concrete slab of large-span through tied-arch composite bridge was investigated by finite element analysis (FEA). Improved methods to decrease concrete stresses were discussed based on comparisons of different deck schemes, construction sequences and measures, and ratios of reinforcement. The results show that the mechanical behavior of concrete slab gets worse with the increase of composite regions between steel beams and concrete slab. The deck scheme with the minimum composite region is recommended on condition that both strength and stiffness of the bridge meet design demands under service loads. Adopting in-situ-place construction method, concrete is suggested to be cast after removing the full-supported frameworks under the bridge. Thus, the axial tensile force of concrete slab caused by the first stage dead load is eliminated. Preloading the bridge before concrete casting and removing the load after the concrete reaching its design strength, the stresses of concrete slab caused by the second stage dead load and live load are further reduced or even eliminated. At last, with a high ratio of reinforcement more than 3%, the concrete stresses decrease obviously.展开更多
The instability of trapezoidal Ⅰ-steel support is analysed for the compound roof of main coal seam in Shaqu Colliery, and the mechanism of bolt supporting is studied. A scheme of bolt supporting has been given and pu...The instability of trapezoidal Ⅰ-steel support is analysed for the compound roof of main coal seam in Shaqu Colliery, and the mechanism of bolt supporting is studied. A scheme of bolt supporting has been given and put into practice, remarkable technical and economic benefits have been got.展开更多
A t-container Ct(u,v)is a set of t internally disjoint paths between two distinct vertices u and v in a graph G,i.e.,Ct(u,v)={P_(1),P_(2),···,Pt}.Moreover,if V(P_(1))∪V(P_(2))∪···∪V(Pt...A t-container Ct(u,v)is a set of t internally disjoint paths between two distinct vertices u and v in a graph G,i.e.,Ct(u,v)={P_(1),P_(2),···,Pt}.Moreover,if V(P_(1))∪V(P_(2))∪···∪V(Pt)=V(G)then Ct(u,v)is called a spanning t-container,denoted by C_(t)^(sc)(u,v).The length of C_(t)^(sc)(u,v)={P_(1),P_(2),···,Pt}is l(C_(t)^(sc)(u,v))=max{l(P_(i))|1≤i≤t}.A graph G is spanning t-connected if there exists a spanning t-container between any two distinct vertices u and v in G.Assume that u and v are two distinct vertices in a spanning t-connected graph G.Let D_(t)^(sc)(u,v)be the collection of all C_(t)^(sc)(u,v)’s.Define the spanning t-wide distance between u and v in G,d_(t)^(sc)(u,v)=min{l(C_(t)^(sc)(u,v))|C_(t)^(sc)(u,v)∈D_(t)^(sc)(u,v)},and the spanning t-wide diameter of G,D_(t)^(sc)(G)=max{d_(t)^(sc)(u,v)|u,v∈V(G)}.In particular,the spanning wide diameter of G is D_(κ)^(sc)(G),whereκis the connectivity of G.In the paper we provide the upper and lower bounds of the spanning wide diameter of a graph,and show that the bounds are best possible.We also determine the exact values of wide diameters of some well known graphs including Harary graphs and generalized Petersen graphs et al..展开更多
When the installation of cables and pipelines needs to go across rivers,bridges are usually adopted to support the cables and pipelines for crossing the rivers.The measure can make full use of the space resources and ...When the installation of cables and pipelines needs to go across rivers,bridges are usually adopted to support the cables and pipelines for crossing the rivers.The measure can make full use of the space resources and have no effect on the flow pattern of rivers.For this reason,analysis on the structural-type design of a large-span steel truss bridge specially used for cables has been performed.The numerical results indicate that the stayed-cable bridge with steel truss beam and concrete main tower has better performance and improved structural type caparisoned with that of the beam and arch bridges,and the construction of the major beam can be without the temporary support.展开更多
The reverse microemulsion system of Span 80-Tw ee n 80/liquid paraffin/acrylamide-H 2O was prepared, and the effects of n-b utanol,NaCl,Nc were studied with the conductivity method.The stability of re verse microemuls...The reverse microemulsion system of Span 80-Tw ee n 80/liquid paraffin/acrylamide-H 2O was prepared, and the effects of n-b utanol,NaCl,Nc were studied with the conductivity method.The stability of re verse microemulsion was reflected, and the information of its dynamic process wa s obtained by measuring its state changes continuously through testing its elect ronic conductivity by using electrochemistry.The results showed that the Span 80 -Tween 80/liquid paraffin/acrylamide-H 2O system was most stable when the HLB value approached 7.5, and its stability was enhanced when 5.0% (mass) NaCl or 10% (mass) Nc was added into this system.展开更多
基金Projects(42377148,51674265)supported by the National Natural Science Foundation of ChinaProject(2018YFC0603705)supported by the National Key Research and Development Program of China。
文摘Engineering shallow,large-span rock tunnels challenges deformation control and escalates construction costs.This study investigates the excavation compensation method(ECM)and its associated technologies to address these issues.Utilizing five key technologies,the ECM effectively modulates radial stress post-excavation,redistributes stress in the surrounding rock,and eliminates tensile stress at the excavation face.Pre-tensioning measures further enhance the rock’s residual strength,establishing a new stability equilibrium.Field tests corroborate the method’s effectiveness,demonstrating a crown settlement reduction of 3–8 mm,a nearly 50%decrease compared to conventional construction approaches.Additionally,material consumption and construction duration were reduced by approximately 30%–35%and 1.75 months per 100 m,respectively.Thus,the ECM represents a significant innovation in enhancing the stability and construction efficiency of large-span rock tunnels,marking a novel contribution to the engineering field.
文摘The precise control of the shape of transversely stiffened suspended cable systems is crucial. However, existing form-finding methods primarily rely on iterative calculations that treat loads as fixed known conditions. These methods are inefficient and fail to accurately control shape results. In this study, we propose a form-finding method that analyzes the load response of models under different sag and stress levels, taking into account the construction process. To analyze the system, a structural finite element model was established in ANSYS, and geometric nonlinear analysis was conducted using the Newton-Raphson method. The form-finding analysis results demonstrate that the proposed method achieves precise control of shape, with a maximum shape error ranging from 0.33% to 0.98%. Furthermore, the relationships between loads and tension forces are influenced by the deformed shape of the structures, exhibiting significant geometric nonlinear characteristics. Meanwhile, the load response analysis reveals that the stress level of the self-equilibrium state in the transversely stiffened suspended cable system is primarily governed by strength criteria, while shape is predominantly controlled by stiffness criteria. Importantly, by simulating the initial tensioning process as an initial condition, this method solves for a counterweight that satisfies the requirements and achieves a self-equilibrium state with the desired shape. The shape of the self-equilibrium state is precisely controlled by simulating the construction process. Overall, this work presents a new method for analyzing the form-finding process of large-span transversely stiffened suspended cable system, considering the construction process which was often overlooked in previous studies.
文摘With the purpose of making calculation more efficient in practical hydraulic simulations, an improved algorithm was proposed and was applied in the practical water distribution field. This methodology was developed by expanding the traditional loop-equation theory through utilization of the advantages of the graph theory in efficiency. The utilization of the spanning tree technique from graph theory makes the proposed algorithm efficient in calculation and simple to use for computer coding. The algorithms for topological generation and practical implementations are presented in detail in this paper. Through the application to a practical urban system, the consumption of the CPU time and computation memory were decreased while the accuracy was greatly enhanced compared with the present existing methods.
基金Project(2005k002-c-2) supported by the Science and Technology Development Program of Railways Department, China
文摘Mechanical behavior of concrete slab of large-span through tied-arch composite bridge was investigated by finite element analysis (FEA). Improved methods to decrease concrete stresses were discussed based on comparisons of different deck schemes, construction sequences and measures, and ratios of reinforcement. The results show that the mechanical behavior of concrete slab gets worse with the increase of composite regions between steel beams and concrete slab. The deck scheme with the minimum composite region is recommended on condition that both strength and stiffness of the bridge meet design demands under service loads. Adopting in-situ-place construction method, concrete is suggested to be cast after removing the full-supported frameworks under the bridge. Thus, the axial tensile force of concrete slab caused by the first stage dead load is eliminated. Preloading the bridge before concrete casting and removing the load after the concrete reaching its design strength, the stresses of concrete slab caused by the second stage dead load and live load are further reduced or even eliminated. At last, with a high ratio of reinforcement more than 3%, the concrete stresses decrease obviously.
文摘The instability of trapezoidal Ⅰ-steel support is analysed for the compound roof of main coal seam in Shaqu Colliery, and the mechanism of bolt supporting is studied. A scheme of bolt supporting has been given and put into practice, remarkable technical and economic benefits have been got.
基金supported by the National Natural Science Foundation of the People's Republic of China“On disjoint path covers of graphs and related problems”(12261085)Natural Science Foundation of Xinjiang Uygur Autonomous Region of China“On spanning wide diameter and spanning cycle ability of interconnection networks”(2021D01C116)。
文摘A t-container Ct(u,v)is a set of t internally disjoint paths between two distinct vertices u and v in a graph G,i.e.,Ct(u,v)={P_(1),P_(2),···,Pt}.Moreover,if V(P_(1))∪V(P_(2))∪···∪V(Pt)=V(G)then Ct(u,v)is called a spanning t-container,denoted by C_(t)^(sc)(u,v).The length of C_(t)^(sc)(u,v)={P_(1),P_(2),···,Pt}is l(C_(t)^(sc)(u,v))=max{l(P_(i))|1≤i≤t}.A graph G is spanning t-connected if there exists a spanning t-container between any two distinct vertices u and v in G.Assume that u and v are two distinct vertices in a spanning t-connected graph G.Let D_(t)^(sc)(u,v)be the collection of all C_(t)^(sc)(u,v)’s.Define the spanning t-wide distance between u and v in G,d_(t)^(sc)(u,v)=min{l(C_(t)^(sc)(u,v))|C_(t)^(sc)(u,v)∈D_(t)^(sc)(u,v)},and the spanning t-wide diameter of G,D_(t)^(sc)(G)=max{d_(t)^(sc)(u,v)|u,v∈V(G)}.In particular,the spanning wide diameter of G is D_(κ)^(sc)(G),whereκis the connectivity of G.In the paper we provide the upper and lower bounds of the spanning wide diameter of a graph,and show that the bounds are best possible.We also determine the exact values of wide diameters of some well known graphs including Harary graphs and generalized Petersen graphs et al..
文摘When the installation of cables and pipelines needs to go across rivers,bridges are usually adopted to support the cables and pipelines for crossing the rivers.The measure can make full use of the space resources and have no effect on the flow pattern of rivers.For this reason,analysis on the structural-type design of a large-span steel truss bridge specially used for cables has been performed.The numerical results indicate that the stayed-cable bridge with steel truss beam and concrete main tower has better performance and improved structural type caparisoned with that of the beam and arch bridges,and the construction of the major beam can be without the temporary support.
文摘The reverse microemulsion system of Span 80-Tw ee n 80/liquid paraffin/acrylamide-H 2O was prepared, and the effects of n-b utanol,NaCl,Nc were studied with the conductivity method.The stability of re verse microemulsion was reflected, and the information of its dynamic process wa s obtained by measuring its state changes continuously through testing its elect ronic conductivity by using electrochemistry.The results showed that the Span 80 -Tween 80/liquid paraffin/acrylamide-H 2O system was most stable when the HLB value approached 7.5, and its stability was enhanced when 5.0% (mass) NaCl or 10% (mass) Nc was added into this system.
