The Li3V2(PO4)3/C composite cathode material was synthesized via sol-gel method using three different chelating agents (citric acid, salicylic acid and polyacrylic acid) at pH value of 3 or 7. The crystal structur...The Li3V2(PO4)3/C composite cathode material was synthesized via sol-gel method using three different chelating agents (citric acid, salicylic acid and polyacrylic acid) at pH value of 3 or 7. The crystal structure, morphology, specific surface area and electrochemical performance of the prepared samples were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge test. The results show that the effects of pH value on the performance of the prepared materials are greatly related to the chelating agents. With salicylic acid or polyacrylic acid as the chelating reagent, the structure, morphology and electrochemical performance of the samples are greatly influenced by the pH values. However, the structure of the materials with citric acid as the chelating agent does not change as pH value changes, and the materials own uniform particle size distribution and good electrochemical performance. It delivers an initial discharge capacity of 113.58 mA·h/g at 10C, remaining as high as 108.48 mA·h/g after 900 cycles, with a capacity retention of 95.51%.展开更多
Bi4Ti3O12 (BIT) crystals were controllably synthesized via a facile hydrothermal process without adding any surfactant or template. The morphologies of BIT with nanosphere, nanoplate, nanobelt, and nanosheet can be ...Bi4Ti3O12 (BIT) crystals were controllably synthesized via a facile hydrothermal process without adding any surfactant or template. The morphologies of BIT with nanosphere, nanoplate, nanobelt, and nanosheet can be selectively obtained by adjusting the pH value of the reactant. The formation mechanisms of these distinctive morphologies were then discussed based on the structural analysis of samples obtained at different pH values. BIT sample prepared at pH=1 showed the highest photocatalytic activity under visible light irradiation. The photocatalytic activities difference for the BIT samples synthesized at different pH values was studied based on their shape, size, and the variation of local structure.展开更多
Ammonium adsorption and desorption properties by purple soils with dif- ferent pH were studied. The results showed that the adsorption and desorption amounts of NH4+ by purple soils increased with the increase of NH4...Ammonium adsorption and desorption properties by purple soils with dif- ferent pH were studied. The results showed that the adsorption and desorption amounts of NH4+ by purple soils increased with the increase of NH4+ concentration, regardless of soil pH values; the largest adsorption and desorption amounts of NH4+ by purple soil at pH 6.0 were 10.3 and 7.96 mg/g, respectively; the largest adsorp- tion and desorption amounts of NH4+ by purple soil at pH 7.2 were 12.8 and 4.62 mg/g, respectively; the largest adsorption and desorption amounts of NH4+ by purple soil at pH 8.0 were 13.5 and 2.23 mg/g, respectively. The isothermal adsorption ki- netics of NH4+ by purple soils fits the Freundlich equation best (R〉0.95). This study shows that the adsorption of NH4+ by purple soils with different pH values is multi- molecular layer uneven surface adsorption.展开更多
The effect of pH values on the extracellular protein and polysaccharide secretions of Acidithiobacillus ferrooxidans was comparatively investigated in different phases of bacterial growth during chalcopyrite bioleachi...The effect of pH values on the extracellular protein and polysaccharide secretions of Acidithiobacillus ferrooxidans was comparatively investigated in different phases of bacterial growth during chalcopyrite bioleaching. The results indicate that the extracellular protein is always more than the extracellular polysaccharide secreted by attached cells on the chalcopyrite, on the contrary, and is always less than the extracellular polysaccharide secreted by free cells in the solution at bacterial adaptive phase, logarithmic phase and stationary phase whenever pH value is at 1.0, 1.5, 2.0 or 2.5; free cells are mainly through the secretion of extracellular polysaccharide rather than the extracellular protein to fight against disadvantageous solution environment, such as high concentration of metal ions and unsuitable pH solution; both amounts of polysaccharide and protein secreted by attached cells are mainly positively related to the solution acidity rather than the total concentration of soluble metal ions. The experimental results imply that bacteria are mainly through secreting more extracellular polysaccharide to fight against disadvantageous environment and the extracellular protein perhaps plays an important role in oxidation?reduction reactions in the bioleaching system.展开更多
The corrosion behaviours of die-cast AZ91D magnesium alloys were investigated in 0.1 mol/L sodium sulphate (Na 2 SO 4 ) solutions with different pH values. The corrosion rates, morphologies, and compositions of the ...The corrosion behaviours of die-cast AZ91D magnesium alloys were investigated in 0.1 mol/L sodium sulphate (Na 2 SO 4 ) solutions with different pH values. The corrosion rates, morphologies, and compositions of the corrosion products were studied by means of scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffractometry (XRD). The results indicate that the order of corrosion rates in Na 2 SO 4 solutions with various pH values is pH 2pH 4pH 7pH 9pH 12. The corrosion rates in acidic solutions are higher than those in alkaline solutions, and the corrosion products are mainly magnesium hydroxide (Mg(OH) 2 ) and hydrated sulphate pickeringite (MgAl 2 (SO 4 ) 4 ·22H 2 O). The results also indicate that the solution pH can influence the corrosion rate and morphology of corrosion products. Chloride ions and sulphate ions have different pitting initiation time.展开更多
[Objective] The aim was to study the distribution characteristics of soil pH values and its correlation with soil nutrients in tobacco-growing areas. [Method] Soil nutrients of 43 samples from tobacco-growing areas in...[Objective] The aim was to study the distribution characteristics of soil pH values and its correlation with soil nutrients in tobacco-growing areas. [Method] Soil nutrients of 43 samples from tobacco-growing areas in Dali City were analyzed.[Results] The results showed that average pH value of tobacco-planting soil in Dali City was 6.52, soil samples which suited for flue-cured tobacco cultivation accounted for 72.09% of total soil samples. In four soil types of tobacco-growing areas, the pH values in a descending order were as follows: alluvial soil〉 paddy soil 〉purple soil〉 red soil. At the altitude range of 1 780-2 200 m, soil pH values showed a gradual decreasing trend. The average contents of soil organic matters were relatively abundant and generally suited for high-quality tobacco cultivation; the average contents of soil alkali-hydrolyzable nitrogen, available phosphorus, exchangeable calcium and exchangeable magnesium were generally at medium and abundant level, however,their rations under the medium level in some tobacco-growing areas were 6.98%,11.63%, 2.33% and 4.65%, respectively; moreover, soil with lower available potassium contents occupied a large proportion, namely 58.14%. [Conclusion] Soil pH values had significant correlation with exchangeable magnesium and exchangeable magnesium, however, they had no significant correlation with other soil nutrients.展开更多
Oxidative coupling of methane(OCM) was conducted over LaAlO3X catalysts that were prepared by a coprecipitation method using different co-precipitation pH values(X = 6–10). The aim is to investigate the effect of p H...Oxidative coupling of methane(OCM) was conducted over LaAlO3X catalysts that were prepared by a coprecipitation method using different co-precipitation pH values(X = 6–10). The aim is to investigate the effect of p H values on the catalytic activity of La AlO3 catalysts in this reaction. The results showed that the co-precipitation pH value affected greatly on the formation of chemical species of precipitate precursors in the co-precipitation step, leading to different phases of the finally obtained LaAlO3 catalysts.When the co-precipitation pH value increased up to 8, the lanthanum-related phases such as La2 O3 and La(OH)3 were gradually formed as by-products, preventing the formation of LaAlO3 perovskite crystalline structure and facilitating the formation of oxygen vacancies on catalyst surface. However, at pH value of9 or higher, the lanthanum content in the precipitate precursor was increased greatly. Not LaAlO3 perovskite but lanthanum-related phases were developed as main phases, reducing their catalytic activities in this reaction. Among LaAlO3 catalysts, the one prepared at pH = 8 showed the highest C2 yield due to its well-developed oxygen vacancies and electrophilic lattice oxygen. Therefore, the co-precipitation pH value strongly affected the LaAlO3 catalyst activity in OCM reaction. A precious pH control should be required to prepare various perovskite catalysts for the OCM.展开更多
Sol-gel technology was employed to synthesize nanosized precursors of La-Mg hydrogen storage alloy at different pH values (0.5, 1.5, 8.0 and 9.0) of reaction solution. The effect of pH value on microstructure of the n...Sol-gel technology was employed to synthesize nanosized precursors of La-Mg hydrogen storage alloy at different pH values (0.5, 1.5, 8.0 and 9.0) of reaction solution. The effect of pH value on microstructure of the nano precursors of La-Mg hydrogen storage alloy was studied by infrared radiation (IR), thermo-gravimetric and differential thermal analysis (TG/DTA), X-ray diffraction analyzer (XRD) and transmission electron microscopy (TEM). IR results indicate that the chelating agent, citric acid, is not fully ionized, and carboxyl groups are not entirely used to complex metal ions in acidic solutions. The efficiency of complexing metal ions is enhanced in basic solutions. TG/DTA results show that the combustion may take place with low rate of the flame propagation that causes the longer combustion time when pH<1.5. On the contrary, the dry gel synthesized in basic solution combusts at low ignition temperature and combustion reaction is violent; it is easy to form fine particles. XRD and TEM results reveal that the precursor powders are mainly two-phase mixture of La 2 O 3 and MgO. The morphology of the particles is almost flake with the size of ~30 nm when pH is 8.0.展开更多
The passive film-induced stress and the susceptibility to SCC of 7050 aluminum alloy in 3.5%sodium chloride solution at various pH values were investigated by slow strain rate testing(SSRT) and flowing stress differ...The passive film-induced stress and the susceptibility to SCC of 7050 aluminum alloy in 3.5%sodium chloride solution at various pH values were investigated by slow strain rate testing(SSRT) and flowing stress differential method.The results showed that the passive film-induced stress and the susceptibility to SCC decreased with increasing pH values when pH≤7,while they increased with increasing pH values when pH7.However,the corrosion type was interpreted as exfoliation corrosion when pH=l and 14,and there was no film formed on the surface of the specimens.The whole variation plots of film-induced stress and the SCC susceptibility with pH values were both presented as a valley shape.The symbol and amount of the film-induced stress were related to the compositions of the passive film,which were analyzed using X-ray photoelectron spectroscopy(XPS).展开更多
In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃...In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃ in 10℃ increments and pH values of 3,7,and 13.Then,the CPB mixture were subjected to rheological tests,thermogravimetric analysis(TG),derivative thermogravimetry analysis(DTG),Fourier-transform infrared spectroscopy(FT-IR),and scanning electron microscopy(SEM).Results demonstrated that the temperatures had significant effects on the rheological properties of CPB,whereas the effects of pH values were relatively unapparent.Higher temperatures(over 20℃)were prone to bring higher shear stress,yield stress,and apparent viscosity with the same pH value condition.However,an overly high temperature(50℃)cannot raise the apparent viscosity.Non-neutral conditions,for pH values of 3 and 13,could strengthen the shear stress and apparent viscosity at the same temperature.Two different yield stress curves could be discovered by uprising pH values,which also led to apparent viscosity of two various curves under the same temperatures(under 50℃).Microscopically,rheological properties of CPB were affected by temperatures and pH values which enhanced or reduced the cement hydration procedures,rates,products and space structures.展开更多
In order to assess the meat quality under different storage time and conditions, the pH value, TBA value, glycogen and lactic acid content in muscle of Landrace and Yorkshire were measured. The results showed that wit...In order to assess the meat quality under different storage time and conditions, the pH value, TBA value, glycogen and lactic acid content in muscle of Landrace and Yorkshire were measured. The results showed that within 10 h post slaughtering, post slaughtering time had extremely significant influence on pH value and lactic acid content of Landrace, but had no significant influence on glycogen content and TBA value. On the other hand, post slaughtering time had extremely significant influence on pH value of Yorkshire, but had no significant influence on glycogen, lactic acid content and TBA value. The pH values of Yorkshire at 3, 5 and 10 h post slaughtering were 5.21% ( P 〈 0.01 ), 5.64% ( P 〈 0.05 ) and 5.59% ( P 〈 0.05 ) higher than those of Landrace, respectively ; the lactic acid content in muscle of Landrace at 10 h post slaughtering was 56.04% (P 〈0.05) higher than that of Yorkshire; the TBA value in muscle of Yorkshire at 10 h post slaughtering was 89. 19% (P 〈 0.01 ) higher than that of Landrace; there was no significant difference in glycogen content between Yorkshire and Landrace. When pork stored at 4℃, storage time had no significant influence on pH value and glycogen content in muscle of Landrace, but had significant influence on drip loss, lactic acid content and TBA value ; storage time had no significant influence on pH value, glycogen content and TBA value in muscle of Yorkshire, but extremely significant influence on drip loss and significant influence on lactic acid content. The pH value in muscle of Yorkshire at 24 h post storage at 4℃ was 6.56% (P 〈0.05) higher than that of Landrace; the glycogen contents in muscle of Landrace at 24, 48, 72, 96, 120 and 144 h post storage at 4℃ were 84.90% (P〈0.05),78.40% (P〈0.01), 101.87% (P〈0.05), 83.80% (P〈0.05), 83.59% (P〈 0.05)and67.25% (P〈0.01)higher than those of York-shire, respectively; the drip loss of Landrace at 72 h post storage and TBA value at 144 h post storage were 55.70% ( P 〈 0.05 ) and 141.33 % ( P 〈 0.01 ) higher than those of Yorkshire, respectively; there was no significant difference in glycogen content between Yorkshire and Landrace. When pork stored at -20℃, storage time had significant influence on TBA value in muscle of Landrace, but had no significant influence on pH value, thawing water loss rate, glycogen and lactic acid content; storage time had no significant impact on pH value, thawing water loss rate, glycogen content and TBA value in muscle of Yorkshire, and had significant influence on lactic acid content. The pH value in muscle of Yorkshire at 24 h post storage at - 20℃ was 5.43 % ( P 〈 0.05 ) higher than that of I.andrace ; the glycogen contents in muscle of Landrace at 24, 48, 72, 96, 120 h post storage at - 20℃ were 85.08% ( P 〈0. 05 ), 108.66% ( P 〈 0.01 ), 72.69% ( P 〈 0.05 ), 90.31% ( P 〈 0.01 ), 70.38% ( P 〉 0.05 ) higher than those of Yorkshire, respectively ; the thawing water loss rates of Landrace at 24 and 72 h were 160.14% ( P 〈 0.05 ) and 74.32% ( P 〈 0.05 ) higher than those of Yorkshire, respectively ; there was no significant difference in lactic acid content and TBA value at the same time point between Yorkshire and Landrace.展开更多
[目的]探究三七土壤钾素、pH值对不同水肥处理的响应以及提高三七产量和品质的最佳水肥制度。[方法]以试验区云南省红河哈尼族彝族自治州泸西县大栗树村种植区三七为研究对象,试验设置4个施肥水平,施肥总量均为480 kg/hm^(2),根据苗期...[目的]探究三七土壤钾素、pH值对不同水肥处理的响应以及提高三七产量和品质的最佳水肥制度。[方法]以试验区云南省红河哈尼族彝族自治州泸西县大栗树村种植区三七为研究对象,试验设置4个施肥水平,施肥总量均为480 kg/hm^(2),根据苗期、花期、果期和根增重期的施肥占比不同,分别记为:F1(25%∶25%∶25%∶25%)、F2(25%∶30%∶20%∶25%)、F3(30%∶30%∶15%∶25%)、F4(40%∶20%∶10%∶30%);设置3个灌水水平W1(200m^(3)/hm^(2))、W2(300m^(3)/hm^(2))、W3(400m^(3)/hm^(2)),设置对照试验(CK),其灌水量为92 m^(3)/hm^(2),施肥总量为480 kg/hm^(2),各生育期施肥比例为苗期∶花期∶果期∶根增重期=25%∶25%∶25%∶25%。分析13种水肥制度下土壤钾素和pH值变化规律,以及钾素、pH值、三七产量、品质、水分利用效率和肥料偏生产力的影响,运用优劣解距离法(Technique for Order Preference by Similarity to Ideal Solution, TOPSIS)对各处理进行综合品质评价,探究三七最优水肥制度。[结果](1)相同灌水水平和施肥比例下,土壤pH值随土层增加而降低,随生育期增加变化小;随生育期增加和施肥的不同无明显变化规律;相同灌溉水平下,三七土壤pH值均小于对应CK。三七所有生育期0~60 cm土层13种处理pH值范围为4.80~8.66,结合三七最适土壤pH值,W3F1、W2F4处理和W2F3处理适宜三七生长。(2)相同处理土壤全钾量和速效钾量随土层增加而减小;0~60 cm土层全钾量平均值随生育期的增加而增加,速效钾量平均值先减小后增加,全钾量平均值随灌水水平增加而减小,速效钾量平均值先增加后减小,全钾量平均值随施肥比例不同先减小后增加,速效钾量平均值先增加后减小。不同生育期吸钾规律为:果期>花期>根增重期>苗期,W2F3处理为钾素中最优处理,其全钾量和速效钾量为10.40g/kg和56.69mg/kg。(3)三七产量和肥料偏生产力随灌水水平的增加先增加后减小,水分利用效率随灌水水平的增加而减小,产量、水分利用效率和肥料偏生产力随施肥比例的不同而增加;皂苷R1、Rg1、Re、Rb1和Rd以及总皂苷量在W2处理下较高,综合得分表明三七品质在W2处理下较好,W2F3处理品质最优。其灌水水平为200 m^(3)/hm^(2),苗期、花期、果期和根增重期施肥量为144、144、72 kg/hm^(2)和120 kg/hm^(2)。[结论]本研究结合最适土壤p H值范围,钾素及三七产量品质分析,W2F3处理为最优水肥制度,有利于三七生长和根系有效成分积累,为实现三七绿色可持续发展具有重要理论及指导意义。展开更多
Steel bar corrosion on electrolytes and the influence of cation were investigated. Three electrolytes of Ca(OH)2, NaOH and KOH with pH levels of 12.5, 11.5, 10.5, 9.5, 8.5 were prepared, meanwhile, the methods of fr...Steel bar corrosion on electrolytes and the influence of cation were investigated. Three electrolytes of Ca(OH)2, NaOH and KOH with pH levels of 12.5, 11.5, 10.5, 9.5, 8.5 were prepared, meanwhile, the methods of free corrosion potential and electrochemical impedance spectra (EIS) were used to evaluate the influence of cations on the depassivation of the steel bar in electrolytes. The experimental results indicate that the initial corrosion pH value of the steel bar is influenced by the cation in electrolyte and the influence of K+ in electrolyte is the most remarkable, followed by Na+ and Ca2+. The initial corrosion pH values are 10.5 in KOH electrolyte, 9.5 in NaOH electrolyte and lower than 8.5 in Ca(OH)2 electrolyte.展开更多
大豆分离蛋白(Soybean protein isolate,SPI)对外界环境的变化极其敏感,中和工段中pH值微小的变化就会改变蛋白质的结构和功能性质。通过添加NaOH调控凝乳的pH值,利用红外光谱和内源荧光光谱分析SPI的结构及功能性质,研究发现在中性条件...大豆分离蛋白(Soybean protein isolate,SPI)对外界环境的变化极其敏感,中和工段中pH值微小的变化就会改变蛋白质的结构和功能性质。通过添加NaOH调控凝乳的pH值,利用红外光谱和内源荧光光谱分析SPI的结构及功能性质,研究发现在中性条件下SPI具有较好的起泡性,碱性条件时SPI具有较好的乳化性,当体系pH值为7时,SPI的起泡性最佳,当体系pH值为8.5时,SPI的乳化性最佳。建立了25 L大豆SPI中和工段pH值精细调控体系,利用Matlab模拟生产过程,通过动态线性与静态非线性拟合,采用模糊自适应控制结合Wiener模型调控中和罐的加碱量,当将中和罐中pH值调控为7时,调节时间为37.4 s,生产的SPI起泡性指数为57.22%,将中和罐中pH值调控为8.5时,调节时间为33.4 s,生产的SPI乳化活性指数为69.35 m^(2)/g,体系无超调量用碱。展开更多
基金Project(2007BAQ01055)supported by the National Key Technology R&D Program of ChinaProject(2011SCU11081)supported by the Sichuan University Funds for Young Scientists,ChinaProject(20120181120103)supported by Ph.D.Programs Foundation of the Ministry of Education of China
文摘The Li3V2(PO4)3/C composite cathode material was synthesized via sol-gel method using three different chelating agents (citric acid, salicylic acid and polyacrylic acid) at pH value of 3 or 7. The crystal structure, morphology, specific surface area and electrochemical performance of the prepared samples were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge test. The results show that the effects of pH value on the performance of the prepared materials are greatly related to the chelating agents. With salicylic acid or polyacrylic acid as the chelating reagent, the structure, morphology and electrochemical performance of the samples are greatly influenced by the pH values. However, the structure of the materials with citric acid as the chelating agent does not change as pH value changes, and the materials own uniform particle size distribution and good electrochemical performance. It delivers an initial discharge capacity of 113.58 mA·h/g at 10C, remaining as high as 108.48 mA·h/g after 900 cycles, with a capacity retention of 95.51%.
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China (No.61308095), China Postdoctoral Science Foundation (No.2013M531286), the Key Laboratory of Preparation and Application Environmentally Friendly Materials of the Ministry of Education of China, and the Science Development Project of Jilin Province No.20130102004JC). (No.20130522071JH and
文摘Bi4Ti3O12 (BIT) crystals were controllably synthesized via a facile hydrothermal process without adding any surfactant or template. The morphologies of BIT with nanosphere, nanoplate, nanobelt, and nanosheet can be selectively obtained by adjusting the pH value of the reactant. The formation mechanisms of these distinctive morphologies were then discussed based on the structural analysis of samples obtained at different pH values. BIT sample prepared at pH=1 showed the highest photocatalytic activity under visible light irradiation. The photocatalytic activities difference for the BIT samples synthesized at different pH values was studied based on their shape, size, and the variation of local structure.
基金Supported by National Natural Science Foundation of China(41271267)National Key Technology Research and Development Program(2013BAJ11B03)Special Scientific Research Fund of Environment Friendly Public Welfare Profession of China(2013467036)~~
文摘Ammonium adsorption and desorption properties by purple soils with dif- ferent pH were studied. The results showed that the adsorption and desorption amounts of NH4+ by purple soils increased with the increase of NH4+ concentration, regardless of soil pH values; the largest adsorption and desorption amounts of NH4+ by purple soil at pH 6.0 were 10.3 and 7.96 mg/g, respectively; the largest adsorp- tion and desorption amounts of NH4+ by purple soil at pH 7.2 were 12.8 and 4.62 mg/g, respectively; the largest adsorption and desorption amounts of NH4+ by purple soil at pH 8.0 were 13.5 and 2.23 mg/g, respectively. The isothermal adsorption ki- netics of NH4+ by purple soils fits the Freundlich equation best (R〉0.95). This study shows that the adsorption of NH4+ by purple soils with different pH values is multi- molecular layer uneven surface adsorption.
基金Project(31200382)supported by the National Natural Science Foundation of China
文摘The effect of pH values on the extracellular protein and polysaccharide secretions of Acidithiobacillus ferrooxidans was comparatively investigated in different phases of bacterial growth during chalcopyrite bioleaching. The results indicate that the extracellular protein is always more than the extracellular polysaccharide secreted by attached cells on the chalcopyrite, on the contrary, and is always less than the extracellular polysaccharide secreted by free cells in the solution at bacterial adaptive phase, logarithmic phase and stationary phase whenever pH value is at 1.0, 1.5, 2.0 or 2.5; free cells are mainly through the secretion of extracellular polysaccharide rather than the extracellular protein to fight against disadvantageous solution environment, such as high concentration of metal ions and unsuitable pH solution; both amounts of polysaccharide and protein secreted by attached cells are mainly positively related to the solution acidity rather than the total concentration of soluble metal ions. The experimental results imply that bacteria are mainly through secreting more extracellular polysaccharide to fight against disadvantageous environment and the extracellular protein perhaps plays an important role in oxidation?reduction reactions in the bioleaching system.
基金Project(51044007)supported by the National Natural Science Foundation of ChinaProject(08121018)supported by the Science and Technology Project of Taiyuan City,China+2 种基金Project(20091402110010)supported by the Doctoral Found of Ministry of Education of ChinaProject(2008029)supported by the Shanxi Province Foundation for Returned Scholars,ChinaProject(20093007)supported by the Young Subject-Leader Foundation and the Innovative Project for Outstanding Post-graduate of Shanxi Province,China
文摘The corrosion behaviours of die-cast AZ91D magnesium alloys were investigated in 0.1 mol/L sodium sulphate (Na 2 SO 4 ) solutions with different pH values. The corrosion rates, morphologies, and compositions of the corrosion products were studied by means of scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffractometry (XRD). The results indicate that the order of corrosion rates in Na 2 SO 4 solutions with various pH values is pH 2pH 4pH 7pH 9pH 12. The corrosion rates in acidic solutions are higher than those in alkaline solutions, and the corrosion products are mainly magnesium hydroxide (Mg(OH) 2 ) and hydrated sulphate pickeringite (MgAl 2 (SO 4 ) 4 ·22H 2 O). The results also indicate that the solution pH can influence the corrosion rate and morphology of corrosion products. Chloride ions and sulphate ions have different pitting initiation time.
基金Supported by Dali Prefecture Science and Technology Planning Project--"Analysis and Evaluation on Tobacco-planting Soil of Dali Prefecture"~~
文摘[Objective] The aim was to study the distribution characteristics of soil pH values and its correlation with soil nutrients in tobacco-growing areas. [Method] Soil nutrients of 43 samples from tobacco-growing areas in Dali City were analyzed.[Results] The results showed that average pH value of tobacco-planting soil in Dali City was 6.52, soil samples which suited for flue-cured tobacco cultivation accounted for 72.09% of total soil samples. In four soil types of tobacco-growing areas, the pH values in a descending order were as follows: alluvial soil〉 paddy soil 〉purple soil〉 red soil. At the altitude range of 1 780-2 200 m, soil pH values showed a gradual decreasing trend. The average contents of soil organic matters were relatively abundant and generally suited for high-quality tobacco cultivation; the average contents of soil alkali-hydrolyzable nitrogen, available phosphorus, exchangeable calcium and exchangeable magnesium were generally at medium and abundant level, however,their rations under the medium level in some tobacco-growing areas were 6.98%,11.63%, 2.33% and 4.65%, respectively; moreover, soil with lower available potassium contents occupied a large proportion, namely 58.14%. [Conclusion] Soil pH values had significant correlation with exchangeable magnesium and exchangeable magnesium, however, they had no significant correlation with other soil nutrients.
基金supported by C1 Gas Refinery Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science,ICT&Future Planning(2015M3D3A1A01064908)
文摘Oxidative coupling of methane(OCM) was conducted over LaAlO3X catalysts that were prepared by a coprecipitation method using different co-precipitation pH values(X = 6–10). The aim is to investigate the effect of p H values on the catalytic activity of La AlO3 catalysts in this reaction. The results showed that the co-precipitation pH value affected greatly on the formation of chemical species of precipitate precursors in the co-precipitation step, leading to different phases of the finally obtained LaAlO3 catalysts.When the co-precipitation pH value increased up to 8, the lanthanum-related phases such as La2 O3 and La(OH)3 were gradually formed as by-products, preventing the formation of LaAlO3 perovskite crystalline structure and facilitating the formation of oxygen vacancies on catalyst surface. However, at pH value of9 or higher, the lanthanum content in the precipitate precursor was increased greatly. Not LaAlO3 perovskite but lanthanum-related phases were developed as main phases, reducing their catalytic activities in this reaction. Among LaAlO3 catalysts, the one prepared at pH = 8 showed the highest C2 yield due to its well-developed oxygen vacancies and electrophilic lattice oxygen. Therefore, the co-precipitation pH value strongly affected the LaAlO3 catalyst activity in OCM reaction. A precious pH control should be required to prepare various perovskite catalysts for the OCM.
基金supported by the Open Foundation of Key Laboratory of the Ministry of Educationof Nonferrous Metal Alloys and Processes(No.EKL09002)The Ph.D.Fund Project of Lanzhou University of Science and Technology(No.BS01200904)
文摘Sol-gel technology was employed to synthesize nanosized precursors of La-Mg hydrogen storage alloy at different pH values (0.5, 1.5, 8.0 and 9.0) of reaction solution. The effect of pH value on microstructure of the nano precursors of La-Mg hydrogen storage alloy was studied by infrared radiation (IR), thermo-gravimetric and differential thermal analysis (TG/DTA), X-ray diffraction analyzer (XRD) and transmission electron microscopy (TEM). IR results indicate that the chelating agent, citric acid, is not fully ionized, and carboxyl groups are not entirely used to complex metal ions in acidic solutions. The efficiency of complexing metal ions is enhanced in basic solutions. TG/DTA results show that the combustion may take place with low rate of the flame propagation that causes the longer combustion time when pH<1.5. On the contrary, the dry gel synthesized in basic solution combusts at low ignition temperature and combustion reaction is violent; it is easy to form fine particles. XRD and TEM results reveal that the precursor powders are mainly two-phase mixture of La 2 O 3 and MgO. The morphology of the particles is almost flake with the size of ~30 nm when pH is 8.0.
基金Funded by the National Natural Science Foundation of China(No.51371039)
文摘The passive film-induced stress and the susceptibility to SCC of 7050 aluminum alloy in 3.5%sodium chloride solution at various pH values were investigated by slow strain rate testing(SSRT) and flowing stress differential method.The results showed that the passive film-induced stress and the susceptibility to SCC decreased with increasing pH values when pH≤7,while they increased with increasing pH values when pH7.However,the corrosion type was interpreted as exfoliation corrosion when pH=l and 14,and there was no film formed on the surface of the specimens.The whole variation plots of film-induced stress and the SCC susceptibility with pH values were both presented as a valley shape.The symbol and amount of the film-induced stress were related to the compositions of the passive film,which were analyzed using X-ray photoelectron spectroscopy(XPS).
基金Project(2019zzts678)supported by the Fundamental Research Funds for the Central Universities,China。
文摘In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃ in 10℃ increments and pH values of 3,7,and 13.Then,the CPB mixture were subjected to rheological tests,thermogravimetric analysis(TG),derivative thermogravimetry analysis(DTG),Fourier-transform infrared spectroscopy(FT-IR),and scanning electron microscopy(SEM).Results demonstrated that the temperatures had significant effects on the rheological properties of CPB,whereas the effects of pH values were relatively unapparent.Higher temperatures(over 20℃)were prone to bring higher shear stress,yield stress,and apparent viscosity with the same pH value condition.However,an overly high temperature(50℃)cannot raise the apparent viscosity.Non-neutral conditions,for pH values of 3 and 13,could strengthen the shear stress and apparent viscosity at the same temperature.Two different yield stress curves could be discovered by uprising pH values,which also led to apparent viscosity of two various curves under the same temperatures(under 50℃).Microscopically,rheological properties of CPB were affected by temperatures and pH values which enhanced or reduced the cement hydration procedures,rates,products and space structures.
基金Supported by Shandong Swine Industry Technology System Innovation(SDAIT-08-03)Agricultural Improved Variety Project of Shandong Province(2011LZ013-01)National Swine Industry Technology System Innovation(CARS-36-09B)
文摘In order to assess the meat quality under different storage time and conditions, the pH value, TBA value, glycogen and lactic acid content in muscle of Landrace and Yorkshire were measured. The results showed that within 10 h post slaughtering, post slaughtering time had extremely significant influence on pH value and lactic acid content of Landrace, but had no significant influence on glycogen content and TBA value. On the other hand, post slaughtering time had extremely significant influence on pH value of Yorkshire, but had no significant influence on glycogen, lactic acid content and TBA value. The pH values of Yorkshire at 3, 5 and 10 h post slaughtering were 5.21% ( P 〈 0.01 ), 5.64% ( P 〈 0.05 ) and 5.59% ( P 〈 0.05 ) higher than those of Landrace, respectively ; the lactic acid content in muscle of Landrace at 10 h post slaughtering was 56.04% (P 〈0.05) higher than that of Yorkshire; the TBA value in muscle of Yorkshire at 10 h post slaughtering was 89. 19% (P 〈 0.01 ) higher than that of Landrace; there was no significant difference in glycogen content between Yorkshire and Landrace. When pork stored at 4℃, storage time had no significant influence on pH value and glycogen content in muscle of Landrace, but had significant influence on drip loss, lactic acid content and TBA value ; storage time had no significant influence on pH value, glycogen content and TBA value in muscle of Yorkshire, but extremely significant influence on drip loss and significant influence on lactic acid content. The pH value in muscle of Yorkshire at 24 h post storage at 4℃ was 6.56% (P 〈0.05) higher than that of Landrace; the glycogen contents in muscle of Landrace at 24, 48, 72, 96, 120 and 144 h post storage at 4℃ were 84.90% (P〈0.05),78.40% (P〈0.01), 101.87% (P〈0.05), 83.80% (P〈0.05), 83.59% (P〈 0.05)and67.25% (P〈0.01)higher than those of York-shire, respectively; the drip loss of Landrace at 72 h post storage and TBA value at 144 h post storage were 55.70% ( P 〈 0.05 ) and 141.33 % ( P 〈 0.01 ) higher than those of Yorkshire, respectively; there was no significant difference in glycogen content between Yorkshire and Landrace. When pork stored at -20℃, storage time had significant influence on TBA value in muscle of Landrace, but had no significant influence on pH value, thawing water loss rate, glycogen and lactic acid content; storage time had no significant impact on pH value, thawing water loss rate, glycogen content and TBA value in muscle of Yorkshire, and had significant influence on lactic acid content. The pH value in muscle of Yorkshire at 24 h post storage at - 20℃ was 5.43 % ( P 〈 0.05 ) higher than that of I.andrace ; the glycogen contents in muscle of Landrace at 24, 48, 72, 96, 120 h post storage at - 20℃ were 85.08% ( P 〈0. 05 ), 108.66% ( P 〈 0.01 ), 72.69% ( P 〈 0.05 ), 90.31% ( P 〈 0.01 ), 70.38% ( P 〉 0.05 ) higher than those of Yorkshire, respectively ; the thawing water loss rates of Landrace at 24 and 72 h were 160.14% ( P 〈 0.05 ) and 74.32% ( P 〈 0.05 ) higher than those of Yorkshire, respectively ; there was no significant difference in lactic acid content and TBA value at the same time point between Yorkshire and Landrace.
文摘[目的]探究三七土壤钾素、pH值对不同水肥处理的响应以及提高三七产量和品质的最佳水肥制度。[方法]以试验区云南省红河哈尼族彝族自治州泸西县大栗树村种植区三七为研究对象,试验设置4个施肥水平,施肥总量均为480 kg/hm^(2),根据苗期、花期、果期和根增重期的施肥占比不同,分别记为:F1(25%∶25%∶25%∶25%)、F2(25%∶30%∶20%∶25%)、F3(30%∶30%∶15%∶25%)、F4(40%∶20%∶10%∶30%);设置3个灌水水平W1(200m^(3)/hm^(2))、W2(300m^(3)/hm^(2))、W3(400m^(3)/hm^(2)),设置对照试验(CK),其灌水量为92 m^(3)/hm^(2),施肥总量为480 kg/hm^(2),各生育期施肥比例为苗期∶花期∶果期∶根增重期=25%∶25%∶25%∶25%。分析13种水肥制度下土壤钾素和pH值变化规律,以及钾素、pH值、三七产量、品质、水分利用效率和肥料偏生产力的影响,运用优劣解距离法(Technique for Order Preference by Similarity to Ideal Solution, TOPSIS)对各处理进行综合品质评价,探究三七最优水肥制度。[结果](1)相同灌水水平和施肥比例下,土壤pH值随土层增加而降低,随生育期增加变化小;随生育期增加和施肥的不同无明显变化规律;相同灌溉水平下,三七土壤pH值均小于对应CK。三七所有生育期0~60 cm土层13种处理pH值范围为4.80~8.66,结合三七最适土壤pH值,W3F1、W2F4处理和W2F3处理适宜三七生长。(2)相同处理土壤全钾量和速效钾量随土层增加而减小;0~60 cm土层全钾量平均值随生育期的增加而增加,速效钾量平均值先减小后增加,全钾量平均值随灌水水平增加而减小,速效钾量平均值先增加后减小,全钾量平均值随施肥比例不同先减小后增加,速效钾量平均值先增加后减小。不同生育期吸钾规律为:果期>花期>根增重期>苗期,W2F3处理为钾素中最优处理,其全钾量和速效钾量为10.40g/kg和56.69mg/kg。(3)三七产量和肥料偏生产力随灌水水平的增加先增加后减小,水分利用效率随灌水水平的增加而减小,产量、水分利用效率和肥料偏生产力随施肥比例的不同而增加;皂苷R1、Rg1、Re、Rb1和Rd以及总皂苷量在W2处理下较高,综合得分表明三七品质在W2处理下较好,W2F3处理品质最优。其灌水水平为200 m^(3)/hm^(2),苗期、花期、果期和根增重期施肥量为144、144、72 kg/hm^(2)和120 kg/hm^(2)。[结论]本研究结合最适土壤p H值范围,钾素及三七产量品质分析,W2F3处理为最优水肥制度,有利于三七生长和根系有效成分积累,为实现三七绿色可持续发展具有重要理论及指导意义。
基金Funded by the National Natural Science Foundation of China(No.50978085 and 50808066)the Six Talent Peak Project (Class A) of Jiangsu Provincethe Research Funds of Hohai University for the Central Universities(No. 2010B07514)
文摘Steel bar corrosion on electrolytes and the influence of cation were investigated. Three electrolytes of Ca(OH)2, NaOH and KOH with pH levels of 12.5, 11.5, 10.5, 9.5, 8.5 were prepared, meanwhile, the methods of free corrosion potential and electrochemical impedance spectra (EIS) were used to evaluate the influence of cations on the depassivation of the steel bar in electrolytes. The experimental results indicate that the initial corrosion pH value of the steel bar is influenced by the cation in electrolyte and the influence of K+ in electrolyte is the most remarkable, followed by Na+ and Ca2+. The initial corrosion pH values are 10.5 in KOH electrolyte, 9.5 in NaOH electrolyte and lower than 8.5 in Ca(OH)2 electrolyte.