Nanoparticles provide great advantages but also great risks. Risks associating with nanoparticles are the problem of all technologies, but they increase in many times in nanotechnologies. Adequate methods of outgoing ...Nanoparticles provide great advantages but also great risks. Risks associating with nanoparticles are the problem of all technologies, but they increase in many times in nanotechnologies. Adequate methods of outgoing production inspection are necessary to solve the problem of risks, and the inspection must be based on the safety standard. Existing safety standard results from a principle of “maximum permissible concentrations or MPC”. This principle is not applicable to nanoparticles, but a safety standard reflecting risks inherent in nanoparticles doesn’t exist. Essence of the risks is illustrated by the example from pharmacology, since its safety assurance is conceptually based on MPC and it has already come against this problem. Possible formula of safety standard for nanoparticles is reflected in many publications, but conventional inspection methods cannot provide its realization, and this gap is an obstacle to assumption of similar formulas. Therefore the development of nanoparticle industry as a whole (also development of the pharmacology in particular) is impossible without the creation of an adequate inspection method. There are suggested new inspection methods founded on the new physical principle and satisfying to the adequate safety standard for nanoparticles. These methods demonstrate that creation of the adequate safety standard and the outgoing production inspection in a large-scale manufacturing of nanoparticles are the solvable problems. However there is a great distance between the physical principle and its hardware realization, and a transition from the principle to the hardware demands great intellectual and material costs. Therefore it is desirable to call attention of the public at large to the necessity of urgent expansions of investigations associated with outgoing inspections in nanoparticles technologies. It is necessary also to attract attention, first, of representatives of state structures controlling approvals of the adequate safety standard to this problem, since it is impossible to compel producers providing the safety without the similar standard, and, second, of leaders of pharmacological industry, since their industry already entered into the nanotechnology era, and they have taken an interest in a forthcoming development of inspection methods.展开更多
Printing techniques hold great potential in the manufacture of electronics such as sensors,micro-supercapacitors,and flexible electronics.However,developing large-scale functional conductive inks with appropriate rheo...Printing techniques hold great potential in the manufacture of electronics such as sensors,micro-supercapacitors,and flexible electronics.However,developing large-scale functional conductive inks with appropriate rheological properties and active components still remains a challenge.Herein,through optimizing the formulations of ink,iron single sites supported N-doped carbon black(Fe_(1)-NC)inks can serve as both conductive electrodes and high-reactive catalysts to realize convenient glucose detection,which pronouncedly reduces the dosage of enzyme and simplifies the sensors preparation.In detail,utilizing in-situ pyrolysis method,Fe_(1)-NC single-atom catalysts(SACs)are prepared in bulk(dekagram-level).The batched Fe_(1)-NC SACs materials can be uniformly mixed with modulated ink to realize the screen printing with high resolution and uniformity.Also,the whole scalable preparation and ink-functional process can be extended to various metals(including Co,Ni,Cu,and Mn).The introduction of highly active Fe_(1)-NC sites reduces the amount of enzyme used in glucose detection by at least 50%,contributing to the cost reduction of sensors.The strategy in harnessing the SACs onto the carbon inks thus provides a broad prospect for the low-cost and large-scale printing of sensitive sensing devices.展开更多
To develop large-scale RP systems used to producing functional parts and large-sized models has become an urgentcall now. In this paper, a large-scale RP system, MEM600-l, based on the melted extrusion manufacturing (...To develop large-scale RP systems used to producing functional parts and large-sized models has become an urgentcall now. In this paper, a large-scale RP system, MEM600-l, based on the melted extrusion manufacturing (MEM)process has been developed successfully. And the key issues to develop such a system are discussed. Based on theactual forming experiment, it is concluded that the MEM600-l works reliably and the forming efficiency is muchhigher than its parallel equipments.展开更多
This research is aimed at investigating Corporate Environmental Responsibility in Manufacturing Enterprises in the Akaki River basin on protecting the urban environment with particular emphasis on twenty selected indu...This research is aimed at investigating Corporate Environmental Responsibility in Manufacturing Enterprises in the Akaki River basin on protecting the urban environment with particular emphasis on twenty selected industries.To attain its objective,the study employed a mixed methods research approach.Data were collected by employing tools such as questionnaire,key informant interview,group discussions and observation.The findings of the research show that corporate environmental responsibility is very low.The majority of Large Scale Industries encompassed in the survey did not show considerable effort on protecting the environment responsibly.The reasons identified by this research are among others the absence of corporate environmental responsibility,low pressure from the enforcing institutions,and lack of financial and human resources.As a result,the Akaki River is highly polluted mainly through toxic industrial effluents released with little or no prior treatment.The consequences are countless.The populations living across the river are facing health deteriorations and economic damages.Based on the findings of this study,setting up strong institutions which are capable of developing new laws and implementing the existing environmental legal framework is commended.展开更多
文摘Nanoparticles provide great advantages but also great risks. Risks associating with nanoparticles are the problem of all technologies, but they increase in many times in nanotechnologies. Adequate methods of outgoing production inspection are necessary to solve the problem of risks, and the inspection must be based on the safety standard. Existing safety standard results from a principle of “maximum permissible concentrations or MPC”. This principle is not applicable to nanoparticles, but a safety standard reflecting risks inherent in nanoparticles doesn’t exist. Essence of the risks is illustrated by the example from pharmacology, since its safety assurance is conceptually based on MPC and it has already come against this problem. Possible formula of safety standard for nanoparticles is reflected in many publications, but conventional inspection methods cannot provide its realization, and this gap is an obstacle to assumption of similar formulas. Therefore the development of nanoparticle industry as a whole (also development of the pharmacology in particular) is impossible without the creation of an adequate inspection method. There are suggested new inspection methods founded on the new physical principle and satisfying to the adequate safety standard for nanoparticles. These methods demonstrate that creation of the adequate safety standard and the outgoing production inspection in a large-scale manufacturing of nanoparticles are the solvable problems. However there is a great distance between the physical principle and its hardware realization, and a transition from the principle to the hardware demands great intellectual and material costs. Therefore it is desirable to call attention of the public at large to the necessity of urgent expansions of investigations associated with outgoing inspections in nanoparticles technologies. It is necessary also to attract attention, first, of representatives of state structures controlling approvals of the adequate safety standard to this problem, since it is impossible to compel producers providing the safety without the similar standard, and, second, of leaders of pharmacological industry, since their industry already entered into the nanotechnology era, and they have taken an interest in a forthcoming development of inspection methods.
基金supported by the Ministry of Science and Technology of China(No.2021YFA1500404)the National Natural Science Foundation of China(Nos.92261105 and 22221003)+1 种基金USTC Research Funds of the Double First-Class Initiative(No.YD9990002022)the Shanghai Sailing Program(No.22YF1413400).
文摘Printing techniques hold great potential in the manufacture of electronics such as sensors,micro-supercapacitors,and flexible electronics.However,developing large-scale functional conductive inks with appropriate rheological properties and active components still remains a challenge.Herein,through optimizing the formulations of ink,iron single sites supported N-doped carbon black(Fe_(1)-NC)inks can serve as both conductive electrodes and high-reactive catalysts to realize convenient glucose detection,which pronouncedly reduces the dosage of enzyme and simplifies the sensors preparation.In detail,utilizing in-situ pyrolysis method,Fe_(1)-NC single-atom catalysts(SACs)are prepared in bulk(dekagram-level).The batched Fe_(1)-NC SACs materials can be uniformly mixed with modulated ink to realize the screen printing with high resolution and uniformity.Also,the whole scalable preparation and ink-functional process can be extended to various metals(including Co,Ni,Cu,and Mn).The introduction of highly active Fe_(1)-NC sites reduces the amount of enzyme used in glucose detection by at least 50%,contributing to the cost reduction of sensors.The strategy in harnessing the SACs onto the carbon inks thus provides a broad prospect for the low-cost and large-scale printing of sensitive sensing devices.
基金The author would like to acknowledge the support by the National Natural Science Foundation of China (Grant No. 50105006)and the support by the 985 Foundation of Tsinghua University,Beijing, China.
文摘To develop large-scale RP systems used to producing functional parts and large-sized models has become an urgentcall now. In this paper, a large-scale RP system, MEM600-l, based on the melted extrusion manufacturing (MEM)process has been developed successfully. And the key issues to develop such a system are discussed. Based on theactual forming experiment, it is concluded that the MEM600-l works reliably and the forming efficiency is muchhigher than its parallel equipments.
文摘This research is aimed at investigating Corporate Environmental Responsibility in Manufacturing Enterprises in the Akaki River basin on protecting the urban environment with particular emphasis on twenty selected industries.To attain its objective,the study employed a mixed methods research approach.Data were collected by employing tools such as questionnaire,key informant interview,group discussions and observation.The findings of the research show that corporate environmental responsibility is very low.The majority of Large Scale Industries encompassed in the survey did not show considerable effort on protecting the environment responsibly.The reasons identified by this research are among others the absence of corporate environmental responsibility,low pressure from the enforcing institutions,and lack of financial and human resources.As a result,the Akaki River is highly polluted mainly through toxic industrial effluents released with little or no prior treatment.The consequences are countless.The populations living across the river are facing health deteriorations and economic damages.Based on the findings of this study,setting up strong institutions which are capable of developing new laws and implementing the existing environmental legal framework is commended.
