One-dimensional pseudo-homogeneous model of an axial flow converter and one-dimensional heteroge-neous model of a horizontal converter have been presented, which describe the distribution of gaseous composition,temper...One-dimensional pseudo-homogeneous model of an axial flow converter and one-dimensional heteroge-neous model of a horizontal converter have been presented, which describe the distribution of gaseous composition,temperature and pressure along the height in the two converters, respectively. Design optimization methods of the two converters have been proposed, by which the minimum catalyst volume can be obtained to satisfy the productive capacity of 1000 tons per day, when the operating pressure is 15.0, 10.0 and 7.5 MPa, respectively.展开更多
A scheme that optimizes the converter of an ammonia synthesis plant to determine optimal inlet temperatures of the catalyst beds has been developed. The optimizer maximizes an objective function—The fractional conver...A scheme that optimizes the converter of an ammonia synthesis plant to determine optimal inlet temperatures of the catalyst beds has been developed. The optimizer maximizes an objective function—The fractional conversion of nitrogen on the four catalyst beds of the converter subject to variation of the inlet temperature to each catalyst bed. An iterative procedure was used to update the initial values of inlet temperature thus ensuring accurate results and quick convergence. Converter model results obtained with optimized operating conditions showed significant increase in fractional conversion of 42.38% (from 0.1949 to 0.2586), increased rate of reaction evident in a 13.18% (0.5317 to 0.4616) and 23.84% (0.1946 to 0.1482) reduction in reactants (hydrogen and nitrogen) concentration respectively and a 56.48% increase (from 0.1181 to 0.1838) in ammonia concentration at the end of the fourth catalyst bed compared to results obtained with industrial operating conditions.展开更多
文摘One-dimensional pseudo-homogeneous model of an axial flow converter and one-dimensional heteroge-neous model of a horizontal converter have been presented, which describe the distribution of gaseous composition,temperature and pressure along the height in the two converters, respectively. Design optimization methods of the two converters have been proposed, by which the minimum catalyst volume can be obtained to satisfy the productive capacity of 1000 tons per day, when the operating pressure is 15.0, 10.0 and 7.5 MPa, respectively.
文摘A scheme that optimizes the converter of an ammonia synthesis plant to determine optimal inlet temperatures of the catalyst beds has been developed. The optimizer maximizes an objective function—The fractional conversion of nitrogen on the four catalyst beds of the converter subject to variation of the inlet temperature to each catalyst bed. An iterative procedure was used to update the initial values of inlet temperature thus ensuring accurate results and quick convergence. Converter model results obtained with optimized operating conditions showed significant increase in fractional conversion of 42.38% (from 0.1949 to 0.2586), increased rate of reaction evident in a 13.18% (0.5317 to 0.4616) and 23.84% (0.1946 to 0.1482) reduction in reactants (hydrogen and nitrogen) concentration respectively and a 56.48% increase (from 0.1181 to 0.1838) in ammonia concentration at the end of the fourth catalyst bed compared to results obtained with industrial operating conditions.
