Interaction between the normal shock wave and the turbulent boundary layer in a supersonic nozzle becomes complex with an increase of a Mach number just before the shock wave. When the shock wave is strong enough to s...Interaction between the normal shock wave and the turbulent boundary layer in a supersonic nozzle becomes complex with an increase of a Mach number just before the shock wave. When the shock wave is strong enough to separate the boundary layer, the shock wave is bifurcated, and the 2nd and 3rd shock waves are formed downstream of the shock wave. The effect of a series of shock waves thus formed, called shock train, is considered to be similar to the effect of one normal shock wave, and the shock train is called pseudo-shock wave. There are many researches on the configuration of the shock wave. However, so far, very few researches have been done on the asymmetric characteristics of the leading shock wave in supersonic nozzles. In the present study, the effect of nozzle geometry on asymmetric shock wave in supersonic nozzles has been investigated experimentally.展开更多
Striation-free laser cutting, especially for thick section steel, is hard to obtain due to several factors. The inside shape of the gas nozzle is considered to be one of the most vital factors in striation-free fiber ...Striation-free laser cutting, especially for thick section steel, is hard to obtain due to several factors. The inside shape of the gas nozzle is considered to be one of the most vital factors in striation-free fiber laser cutting. 0.8 mm normal nozzle and a supersonic nozzle are used to cut 0.8 mm AISI316L stainless steel (022Cr17Ni12Mo2) separately. The orthogonal experiment takes nozzle standoff distance, cutting speed, Laser power and gas pressure as its impacting factors. The same orthogonal table is adopted in different condition, using normal nozzle and using supersonic nozzle. In the mean time, Ar gas is used as assisted cutting gas in the experiment. The data from this experiment show that supersonic nozzle seems to be a strong helper for fiber laser cutting. Feed rate’s effect seems stable and inconspicuous under the condition of using supersonic nozzle.展开更多
Double pulsed-laser-ablation is a promising method to prepare nanoparticle composites. The backward movement of the plume after the collision with counter-propagating shock wave has been observed in experiments. In th...Double pulsed-laser-ablation is a promising method to prepare nanoparticle composites. The backward movement of the plume after the collision with counter-propagating shock wave has been observed in experiments. In the present study, collision dynamics of the oppositely injected Si and Ge jets into a He background gas was numerically calculated as a simulation for double pulsed-laser-ablation. The experimentally observed backward movement was reproduced. The effect of distance between two jet exits on the distance of backward movement of the jet, B<sub>L</sub>, after the collision with the counter-propagating shock front was calculated to discuss the collision dynamics and to optimize the target distance for the experiment. We found that B<sub>L </sub>does not decrease monotonically with increasing distance between two jet exits, but has a maximum value at a certain distance. This behavior is discussed by calculating the expansion dynamics of an individual jet. Shock wave grows with time at the initial stage of the jet expansion and then attenuates;the density just behind the shock front for individual jet has a maximum value at a certain time and position. B<sub>L</sub> has a maximum value when the densities just behind the shock fronts for the individual jets have maximum values. This result is important for designing the appropriate distance between the two jet exits, i.e., the distance between the targets of double pulsed-laser-ablation.展开更多
Influence of the shock wave on the turbulence in a supersonic nozzle was investigated for a SF6 puffer circuit breaker interruption process. Turbulence is enlarged through the shock wave. Baroclinic generation of vort...Influence of the shock wave on the turbulence in a supersonic nozzle was investigated for a SF6 puffer circuit breaker interruption process. Turbulence is enlarged through the shock wave. Baroclinic generation of vortex causes flow separation and broadening of the arc cross section. V-I characteristics are slightly modified due to the shock wave＇s influence.展开更多
The present study focuses on numerical simulation of the gas-solid suspension flow in a supersonic nozzle. The Euler- Lagrange approach using a Discrete Phase Model (DPM) has been used to solve the compressible Navier...The present study focuses on numerical simulation of the gas-solid suspension flow in a supersonic nozzle. The Euler- Lagrange approach using a Discrete Phase Model (DPM) has been used to solve the compressible Navier-Stokes equa- tions. A fully implicit finite volume scheme has been employed to discretize the governing equations. Based upon the present CFD results, the particle loading effect on gas-solid suspension flow was investigated. The results show that the presence of particles has a big influence on the gas phase behavior. The structure of shock train, the separation point, and the vortex of the backflow are all related to particle loading. As the particle loading increases the flow characteris- tics behave differently such as 1) the strength of shock train decreases, 2) the separation point moves toward the nozzle exit, 3) the number and strength of vortex increase, 4) the strength of first shock also increases while the other pseudo shocks decreases. The change of gas flow behavior in turn affects the particle distribution. The particles are concen- trated at the shear layers separated from the upper wall surface.展开更多
In recent years, hysteretic phenomena in fluid flow systems drew attention for their great variety of industrial and engineering applications. When the high-pressure gas is exhausted to atmosphere from the nozzle exit...In recent years, hysteretic phenomena in fluid flow systems drew attention for their great variety of industrial and engineering applications. When the high-pressure gas is exhausted to atmosphere from the nozzle exit, the expanded supersonic jet with the Mach disk is formed at a specific condition. In two-dimensional expanded supersonic jet, the hysteresis phenomenon for the reflection type of shock wave is occurred under the quasi-steady flow and the transitional pressure ratio between the regular reflection and Mach reflection is affected by this phe- nomenon. However, so far, there are very few researches for the hysteretic phenomenon of shock wave in a supersonic internal flow and the phenomenon has not been investigated satisfactorily. The present study was concemed with the experimental and numerical investigations of hysteretic phenomena of shock wave in a supersonic nozzle, and discussed the relationship between hysteresis phenomenon and rate of the change of pressure ratio with time.展开更多
The supersonic nozzle is the most important device of an ejector-diffuser system.The best operation condition and optimal structure of supersonic nozzle are hardly known due to the complicated turbulent mixing,compres...The supersonic nozzle is the most important device of an ejector-diffuser system.The best operation condition and optimal structure of supersonic nozzle are hardly known due to the complicated turbulent mixing,compressibility effects and even flow unsteadiness which are generated around the nozzle extent.In the present study,the primary stream nozzle was redesigned using convergent nozzle to activate the shear actions between the primary and secondary streams,by means of longitudinal vortices generated between the Chevron lobes.Exactly same geometrical model of ejector-diffuser system was created to validate the results of experimental data.The operation characteristics of the ejector system were compared between Chevron nozzle and conventional convergent nozzle for the primary stream.A CFD method has been applied to simulate the supersonic flows and shock waves inside the ejector.It is observed that the flow structure and shock system were changed and primary numerical analysis results show that the Chevron nozzle achieve a positive effect on the supersonic ejector-diffuser system performance.The ejector with Chevron nozzle can entrain more secondary stream with less primary stream mass flow rate.展开更多
文摘Interaction between the normal shock wave and the turbulent boundary layer in a supersonic nozzle becomes complex with an increase of a Mach number just before the shock wave. When the shock wave is strong enough to separate the boundary layer, the shock wave is bifurcated, and the 2nd and 3rd shock waves are formed downstream of the shock wave. The effect of a series of shock waves thus formed, called shock train, is considered to be similar to the effect of one normal shock wave, and the shock train is called pseudo-shock wave. There are many researches on the configuration of the shock wave. However, so far, very few researches have been done on the asymmetric characteristics of the leading shock wave in supersonic nozzles. In the present study, the effect of nozzle geometry on asymmetric shock wave in supersonic nozzles has been investigated experimentally.
文摘Striation-free laser cutting, especially for thick section steel, is hard to obtain due to several factors. The inside shape of the gas nozzle is considered to be one of the most vital factors in striation-free fiber laser cutting. 0.8 mm normal nozzle and a supersonic nozzle are used to cut 0.8 mm AISI316L stainless steel (022Cr17Ni12Mo2) separately. The orthogonal experiment takes nozzle standoff distance, cutting speed, Laser power and gas pressure as its impacting factors. The same orthogonal table is adopted in different condition, using normal nozzle and using supersonic nozzle. In the mean time, Ar gas is used as assisted cutting gas in the experiment. The data from this experiment show that supersonic nozzle seems to be a strong helper for fiber laser cutting. Feed rate’s effect seems stable and inconspicuous under the condition of using supersonic nozzle.
文摘Double pulsed-laser-ablation is a promising method to prepare nanoparticle composites. The backward movement of the plume after the collision with counter-propagating shock wave has been observed in experiments. In the present study, collision dynamics of the oppositely injected Si and Ge jets into a He background gas was numerically calculated as a simulation for double pulsed-laser-ablation. The experimentally observed backward movement was reproduced. The effect of distance between two jet exits on the distance of backward movement of the jet, B<sub>L</sub>, after the collision with the counter-propagating shock front was calculated to discuss the collision dynamics and to optimize the target distance for the experiment. We found that B<sub>L </sub>does not decrease monotonically with increasing distance between two jet exits, but has a maximum value at a certain distance. This behavior is discussed by calculating the expansion dynamics of an individual jet. Shock wave grows with time at the initial stage of the jet expansion and then attenuates;the density just behind the shock front for individual jet has a maximum value at a certain time and position. B<sub>L</sub> has a maximum value when the densities just behind the shock fronts for the individual jets have maximum values. This result is important for designing the appropriate distance between the two jet exits, i.e., the distance between the targets of double pulsed-laser-ablation.
文摘Influence of the shock wave on the turbulence in a supersonic nozzle was investigated for a SF6 puffer circuit breaker interruption process. Turbulence is enlarged through the shock wave. Baroclinic generation of vortex causes flow separation and broadening of the arc cross section. V-I characteristics are slightly modified due to the shock wave＇s influence.
文摘The present study focuses on numerical simulation of the gas-solid suspension flow in a supersonic nozzle. The Euler- Lagrange approach using a Discrete Phase Model (DPM) has been used to solve the compressible Navier-Stokes equa- tions. A fully implicit finite volume scheme has been employed to discretize the governing equations. Based upon the present CFD results, the particle loading effect on gas-solid suspension flow was investigated. The results show that the presence of particles has a big influence on the gas phase behavior. The structure of shock train, the separation point, and the vortex of the backflow are all related to particle loading. As the particle loading increases the flow characteris- tics behave differently such as 1) the strength of shock train decreases, 2) the separation point moves toward the nozzle exit, 3) the number and strength of vortex increase, 4) the strength of first shock also increases while the other pseudo shocks decreases. The change of gas flow behavior in turn affects the particle distribution. The particles are concen- trated at the shear layers separated from the upper wall surface.
文摘In recent years, hysteretic phenomena in fluid flow systems drew attention for their great variety of industrial and engineering applications. When the high-pressure gas is exhausted to atmosphere from the nozzle exit, the expanded supersonic jet with the Mach disk is formed at a specific condition. In two-dimensional expanded supersonic jet, the hysteresis phenomenon for the reflection type of shock wave is occurred under the quasi-steady flow and the transitional pressure ratio between the regular reflection and Mach reflection is affected by this phe- nomenon. However, so far, there are very few researches for the hysteretic phenomenon of shock wave in a supersonic internal flow and the phenomenon has not been investigated satisfactorily. The present study was concemed with the experimental and numerical investigations of hysteretic phenomena of shock wave in a supersonic nozzle, and discussed the relationship between hysteresis phenomenon and rate of the change of pressure ratio with time.
文摘The supersonic nozzle is the most important device of an ejector-diffuser system.The best operation condition and optimal structure of supersonic nozzle are hardly known due to the complicated turbulent mixing,compressibility effects and even flow unsteadiness which are generated around the nozzle extent.In the present study,the primary stream nozzle was redesigned using convergent nozzle to activate the shear actions between the primary and secondary streams,by means of longitudinal vortices generated between the Chevron lobes.Exactly same geometrical model of ejector-diffuser system was created to validate the results of experimental data.The operation characteristics of the ejector system were compared between Chevron nozzle and conventional convergent nozzle for the primary stream.A CFD method has been applied to simulate the supersonic flows and shock waves inside the ejector.It is observed that the flow structure and shock system were changed and primary numerical analysis results show that the Chevron nozzle achieve a positive effect on the supersonic ejector-diffuser system performance.The ejector with Chevron nozzle can entrain more secondary stream with less primary stream mass flow rate.
