Multi-sensor vision system plays an important role in the 3D measurement of large objects.However,due to the widely distribution of sensors,the problem of lacking common fields of view（FOV） arises frequently,which m...Multi-sensor vision system plays an important role in the 3D measurement of large objects.However,due to the widely distribution of sensors,the problem of lacking common fields of view（FOV） arises frequently,which makes the global calibration of the vision system quite difficult.The primary existing solution relies on large-scale surveying equipments,which is ponderous and inconvenient for field calibrations.In this paper,a global calibration method of multi-sensor vision system is proposed and investigated.The proposed method utilizes pairs of skew laser lines,which are generated by a group of laser pointers,as the calibration objects.Each pair of skew laser lines provides a unique coordinate system in space which can be reconstructed in certain vision sensor＇s coordinates by using a planar pattern.Then the geometries of sensors are computed under rigid transformation constrains by taking coordinates of each skew lines pair as the intermediary.The method is applied on both visual cameras with synthetic data and a real two-camera vision system;results show the validity and good performance.The prime contribution of this paper is taking skew laser lines as the global calibration objects,which makes the method simple and flexible.The method need no expensive equipments and can be used in large-scale calibration.展开更多
Two measuring methods, high-speed camera and optical monitoring system, were used to study processes of laser welding. Molten pool, cooling time and temperature field were analyzed based on real measured images and op...Two measuring methods, high-speed camera and optical monitoring system, were used to study processes of laser welding. Molten pool, cooling time and temperature field were analyzed based on real measured images and optical signal data. The results show that the width of molten pool is almost equal to the width of weld, and length is about 7. 8 mm. The solidification time is about 0. 5 s and the temperature gradient is great, so HAZ is very small. The method and results will be of benefit to build the relationship between welding parameters and microstructure.展开更多
A single-channel far-infrared （FIR） laser interferometer was developed to measure the line averaged electron density on the EAST tokamak. The structure of the single-channel FIR laser interferometer is described in ...A single-channel far-infrared （FIR） laser interferometer was developed to measure the line averaged electron density on the EAST tokamak. The structure of the single-channel FIR laser interferometer is described in detail. The evolution of density sawtooth oscillation was measured by means the FIR laser interferometer, and was identified by electron cyclotron emission （ECE） signals and soft X-ray intensity. The discharges with and without sawtooth were compared with each other in the Hugill diagram.展开更多
It is well known that the accuracy of camera calibration is constrained by the size of the reference plate,it is difficult to fabricate large reference plates with high precision.Therefore,it is non-trivial to calibra...It is well known that the accuracy of camera calibration is constrained by the size of the reference plate,it is difficult to fabricate large reference plates with high precision.Therefore,it is non-trivial to calibrate a camera with large field of view(FOV).In this paper,a method is proposed to construct a virtual large reference plate with high precision.Firstly,a high precision datum plane is constructed with a laser interferometer and one-dimensional air guideway,and then the reference plate is positioned at different locations and orientations in the FOV of the camera.The feature points of reference plate are projected to the datum plane to obtain a virtual large reference plate with high-precision.The camera is moved to several positions to get different virtual reference plates,and the camera is calibrated with the virtual reference plates.The experimental results show that the mean re-projection error of the camera calibrated with the proposed method is 0.062 pixels.The length of a scale bar with standard length of 959.778mm was measured with a vision system composed of two calibrated cameras,and the length measurement error is 0.389mm.展开更多
基金supported by National Natural Science Foundation of China (Grant No. 60804060)Research Fund for the Doctoral Program of Higher Education of China (Grant No. 200800061003)
文摘Multi-sensor vision system plays an important role in the 3D measurement of large objects.However,due to the widely distribution of sensors,the problem of lacking common fields of view（FOV） arises frequently,which makes the global calibration of the vision system quite difficult.The primary existing solution relies on large-scale surveying equipments,which is ponderous and inconvenient for field calibrations.In this paper,a global calibration method of multi-sensor vision system is proposed and investigated.The proposed method utilizes pairs of skew laser lines,which are generated by a group of laser pointers,as the calibration objects.Each pair of skew laser lines provides a unique coordinate system in space which can be reconstructed in certain vision sensor＇s coordinates by using a planar pattern.Then the geometries of sensors are computed under rigid transformation constrains by taking coordinates of each skew lines pair as the intermediary.The method is applied on both visual cameras with synthetic data and a real two-camera vision system;results show the validity and good performance.The prime contribution of this paper is taking skew laser lines as the global calibration objects,which makes the method simple and flexible.The method need no expensive equipments and can be used in large-scale calibration.
文摘Two measuring methods, high-speed camera and optical monitoring system, were used to study processes of laser welding. Molten pool, cooling time and temperature field were analyzed based on real measured images and optical signal data. The results show that the width of molten pool is almost equal to the width of weld, and length is about 7. 8 mm. The solidification time is about 0. 5 s and the temperature gradient is great, so HAZ is very small. The method and results will be of benefit to build the relationship between welding parameters and microstructure.
基金National Natural Science Foundation of China(Nos.10475078,10675127,10675126,10675124,10605028)
文摘A single-channel far-infrared （FIR） laser interferometer was developed to measure the line averaged electron density on the EAST tokamak. The structure of the single-channel FIR laser interferometer is described in detail. The evolution of density sawtooth oscillation was measured by means the FIR laser interferometer, and was identified by electron cyclotron emission （ECE） signals and soft X-ray intensity. The discharges with and without sawtooth were compared with each other in the Hugill diagram.
文摘It is well known that the accuracy of camera calibration is constrained by the size of the reference plate,it is difficult to fabricate large reference plates with high precision.Therefore,it is non-trivial to calibrate a camera with large field of view(FOV).In this paper,a method is proposed to construct a virtual large reference plate with high precision.Firstly,a high precision datum plane is constructed with a laser interferometer and one-dimensional air guideway,and then the reference plate is positioned at different locations and orientations in the FOV of the camera.The feature points of reference plate are projected to the datum plane to obtain a virtual large reference plate with high-precision.The camera is moved to several positions to get different virtual reference plates,and the camera is calibrated with the virtual reference plates.The experimental results show that the mean re-projection error of the camera calibrated with the proposed method is 0.062 pixels.The length of a scale bar with standard length of 959.778mm was measured with a vision system composed of two calibrated cameras,and the length measurement error is 0.389mm.
