Configuration optimization of laser guide stars and wavefront correctors for multi-conjugation adaptive optics

Multi-conjugation adaptive optics（MCAOs） have been investigated and used in the large aperture optical telescopes for high-resolution imaging with large field of view（FOV）.The atmospheric tomographic phase reconstruction and projection of three-dimensional turbulence volume onto wavefront correctors,such as deformable mirrors（DMs） or liquid crystal wavefront correctors（LCWCs）,is a very important step in the data processing of an MCAO＇s controller.In this paper,a method according to the wavefront reconstruction performance of MCAO is presented to evaluate the optimized configuration of multi laser guide stars（LGSs） and the reasonable conjugation heights of LCWCs.Analytical formulations are derived for the different configurations and are used to generate optimized parameters for MCAO.Several examples are given to demonstrate our LGSs configuration optimization method.Compared with traditional methods,our method has minimum wavefront tomographic error,which will be helpful to get higher imaging resolution at large FOV in MCAO.

A high precision phase reconstruction algorithm for multi-laser guide stars adaptive optics

Adaptive optics（AO） systems are widespread and considered as an essential part of any large aperture telescope for obtaining a high resolution imaging at present.To enlarge the imaging field of view（FOV）,multi-laser guide stars（LGSs） are currently being investigated and used for the large aperture optical telescopes.LGS measurement is necessary and pivotal to obtain the cumulative phase distortion along a target in the multi-LGSs AO system.We propose a high precision phase reconstruction algorithm to estimate the phase for a target with an uncertain turbulence profile based on the interpolation.By comparing with the conventional average method,the proposed method reduces the root mean square（RMS） error from 130 nm to 85 nm with a 30% reduction for narrow FOV.We confirm that such phase reconstruction algorithm is validated for both narrow field AO and wide field AO.

Development and Demonstration of Australian First Working Sodium Guide Star Laser

The Australian first working sodium guide star laser system has been designed and developed for various astronomical and space-related applications. A completely diode-pumped pulsed system was developed initially followed by a largely fiber-based continuous wave (CW) system operating at 589 nm achieved through a unique wavelength conversion scheme by combining 1342 and 1050 nm through a sum frequency generation process. For the CW system, single-mode laser beams at both 1342 and 1050 nm are achieved from fiber-based seed oscillators and fiber amplifiers. The output power of ~25 W at 1342 nm is achieved from a single frequency fiber Raman amplifier. Output power up to 70 W at 1050 nm is achieved from a Yb-doped fiber pre-amplifier followed by a Yb-doped fiber power amplifier. For the sum frequency generation process, optimum focusing parameters are evaluated and determined. The CW system has generated more than 20 W output power at 589 nm, a circularly polarised beam with a good beam quality, spectral linewidth ≤ 2 MHz, and the laser output locked on the sodium D2 line at 589.159 nm. The system has been successfully demonstrated at EOS Space Research Centre, Mt Stromlo, Canberra, and become the Australian first working sodium guide star laser system.

Sodium guide star laser generation by single-pass frequency doubling in a periodically poled near-stoichiometric LiTaO_3 crystal

We report in this work a continuous wave(CW) narrowband 589 nm light generation for the purpose of laser guide assisted adaptive optics.A 39 mm long 1 mm thick periodically poled near stoichiometric LiTaO3 crystal with duty cycle near 50% was fabricated using electrical poling at room temperature and pumped by a Raman fiber amplifier.We tested two temperature control ovens,and a maximum conversion efficiency of about 14.3%,corresponding to 4 W of yellow light with 28 W of fundamental power,and bandwidth less than 0.18 GHz was achieved.