期刊文献+
共找到34篇文章
< 1 2 >
每页显示 20 50 100
Nuclear fusion from Coulomb explosions of deuterated methane clusters subjected to ultraintense femtosecond laser pulses 被引量:1
1
作者 卢海洋 王成 +5 位作者 陈光龙 Kim Cheol-Jung 刘建胜 倪国权 李儒新 徐至展 《Chinese Physics B》 SCIE EI CAS CSCD 2009年第2期537-541,共5页
This paper reports that Coulomb explosions taken place in the experiment of heteronuclear deuterated methane clusters ((CD4)n) in a gas jet subjected to intense femtoseeond laser pulses (170 mJ, 70 fs) have led ... This paper reports that Coulomb explosions taken place in the experiment of heteronuclear deuterated methane clusters ((CD4)n) in a gas jet subjected to intense femtoseeond laser pulses (170 mJ, 70 fs) have led to table-top laser driven DD nuclear fusion. The clusters produced in supersonic expansion had an average size of about 5 nm in radius and the laser intensity used was 3 × 10^17 W/cm^2.The measured maximum and average energies of deuterons produced in the laser-cluster interaction were 60 and 13.5 keV, respectively. Prom DD collisions of energetic deuterons, a yield of 2.5(±0.4) × 10^4 fusion neutrons of 2.45 MeV per shot was realized, giving rise to a neutron production efficiency of about 1.5 × 10^5 per joule of incident laser pulse energy. Theoretical calculations were performed and a fairly good agreement of the calculated neutron yield with that obtained from the present experiment was found. 展开更多
关键词 molecular clusters Coulomb explosion DD nuclear fusion intense femtosecond lasers
下载PDF
A Way to Realize Controlled Nuclear Fusion by &gamma;-Laser or &gamma;-Ray
2
作者 Shihao Chen Ziwei Chen 《World Journal of Nuclear Science and Technology》 2018年第4期190-196,共7页
A way is proposed to realize controllable-nuclear fusion by &gamma;-laser or &gamma;-ray and ordinary laser with their certain frequencies and large enough intensities to irradiate a target ball. The function ... A way is proposed to realize controllable-nuclear fusion by &gamma;-laser or &gamma;-ray and ordinary laser with their certain frequencies and large enough intensities to irradiate a target ball. The function of ordinary laser is to heat the target nuclei and to realize the inertial confinement for the target nuclei. The target nuclei absorbing &gamma;-photons will be in a certain excited state. The scattering cross-sections will be larger and the ignition temperature will be lower to realize fusion of the nuclei in their excited states than those of the nuclei in their ground states. In contrast with the nuclei applied in conventional fusion, e.g., deutons and tritons, according to the way, the nuclei applied to fusion should have the following characters: the nuclei have their excited states, one of the excited states has higher energy and longer lifetime, and the masses of the nuclei are lesser. Thus, the Lawson conditions can more easily be realized so that the controllable nuclear fusion is possibly realized by the way. 展开更多
关键词 CONTROLLED nuclear fusion Excited States of a NUCLEUS laser Interaction of laser with Matter
下载PDF
Effect of laser spot size on fusion neutron yield in laser-deuterium cluster interactions 被引量:1
3
作者 陈光龙 卢海洋 +4 位作者 王成 刘建胜 李儒新 倪国权 徐至展 《Chinese Physics B》 SCIE EI CAS CSCD 2008年第6期2124-2129,共6页
The effect of the laser spot size on the neutron yield of table-top nuclear fusion from explosions of a femtosecond intense laser pulse heated deuterium clusters is investigated by using a simplified model, in which t... The effect of the laser spot size on the neutron yield of table-top nuclear fusion from explosions of a femtosecond intense laser pulse heated deuterium clusters is investigated by using a simplified model, in which the cluster size distribution and the energy attenuation of the laser as it propagates through the cluster jet are taken into account. It has been found that there exists a proper laser spot size for the maximum fusion neutron yield for a given laser pulse and a specific deuterium gas cluster jet. The proper spot size, which is dependent on the laser parameters and the cluster jet parameters, has been calculated and compared with the available experimental data. A reasonable agreement between the calculated results and the published experimental results is found. 展开更多
关键词 CLUSTERS femtosecond intense laser pulse table-top laser driven nuclear fusion
下载PDF
New Laser Fusion without Implosion
4
作者 K. Imasaki D. Li 《材料科学与工程(中英文A版)》 2015年第3期136-147,共12页
关键词 激光聚变 内爆 带电粒子束 能量增益 强激光场 直接转换 裂变反应堆 核反应
下载PDF
Positron Induced Fusion Pulsed Space Propulsion through an Ultra-Intense Laser
5
作者 Robert LeMoyne 《Journal of Applied Mathematics and Physics》 2017年第4期813-821,共9页
A pulsed space propulsion system using position antimatter to induce Deuterium-Tritium fusion through an ultra-intense laser incident on a gold target is conceptually presented through fundamental performance analysis... A pulsed space propulsion system using position antimatter to induce Deuterium-Tritium fusion through an ultra-intense laser incident on a gold target is conceptually presented through fundamental performance analysis. As opposed to traditional strategies positron antimatter is considered rather than antiproton antimatter. Positron antimatter can be produced by an ultra- intense laser incident on a high atomic number target, such as gold. The ultra-intense laser production of positron antimatter mechanism greatly alleviates constraints, such as requirements for antimatter storage imperative for antiproton antimatter. Also the ultra-intense laser and associated energy source can be stationary or positioned remote while the pulsed space propulsion system using position antimatter to induce Deuterium-Tritium fusion is in flight. Various mechanisms for antimatter catalyzed fusion are considered, for which the preferred mechanism is the antiproton hotspot ignition strategy. Fundamental performance analysis is subsequently applied to derive positron antimatter generation requirements and associated propulsion performance. The characteristics of the pulsed space propulsion system using position antimatter to induce Deuterium-Tritium fusion through an ultra-intense laser incident on a gold target imply a promising non-chemical propulsion alternative for the transport of bulk cargo to support space missions. 展开更多
关键词 Antimatter INDUCED fusion PULSED SPACE PROPULSION nuclear fusion Ultra-Intense laser Bethe-Heitler Process POSITRON Antiproton Hotspot Ignition
下载PDF
Approximating the Radial Distribution Function of the Electron in a Hydrogen Atom by a Normal Distribution Suggests That Magnetic Confinement Fusion Would Be Less Energy Efficient than Inertial Confinement Fusion
6
作者 Motohisa Osaka 《Applied Mathematics》 2024年第9期585-593,共9页
Since the position of the electron in a hydrogen atom cannot be determined, the region in which it resides is said to be determined stochastically and forms an electron cloud. The probability density function of the s... Since the position of the electron in a hydrogen atom cannot be determined, the region in which it resides is said to be determined stochastically and forms an electron cloud. The probability density function of the single electron in 1s orbit is expressed as φ2, a function of distance from the nucleus. However, the probability of existence of the electron is expressed as a radial distribution function at an arbitrary distance from the nucleus, so it is estimated as the probability of the entire spherical shape of that radius. In this study, it has been found that the electron existence probability approximates the radial distribution function by assuming that the probability of existence of the electron being in the vicinity of the nucleus follows a normal distribution for arbitrary x-, y-, and z-axis directions. This implies that the probability of existence of the electron, which has been known only from the distance information, would follow a normal distribution independently in the three directions. When the electrons’ motion is extremely restricted in a certain direction by the magnetic field of both tokamak and helical fusion reactors, the probability of existence of the electron increases with proximity to the nucleus, and as a result, it is less likely to be liberated from the nucleus. Therefore, more and more energy is required to free the nucleus from the electron in order to generate plasma. 展开更多
关键词 Electron Cloud Radial Distribution Function nuclear fusion TOKAMAK laser
下载PDF
Controlled Fusion Strategy Using Ultra-Intense Laser Derived Positron Generation for Initiation
7
作者 Robert Le Moyne 《Journal of Applied Mathematics and Physics》 2018年第4期693-703,共11页
A controllable strategy for eliciting nuclear fusion is presented through ultra-intenselaser derived positron generation by a conceptual first physics perspective. The capability to generate positrons on demand in a c... A controllable strategy for eliciting nuclear fusion is presented through ultra-intenselaser derived positron generation by a conceptual first physics perspective. The capability to generate positrons on demand in a controlled manner through an ultra-intense laser incident on a high atomic number target, such as gold, is the intrinsic core to the foundation of controllable nuclear fusion. Positron antimatter generated from the periphery of the fusion fuel pellet provides the basis for initiating the fusion reaction, which is regulated by controlling the operation of the ultra-intense laser. A dual pulsed Fast Ignition mechanism is selected to achieve the fusion reaction. Based on first physics performance analysis the controllable strategy for eliciting nuclear fusion through ultra-intenselaser derived positron generation offers a realizable means for achieving regulated nuclear fusion. A future perspective of the controllable fusion strategy addresses the opportunities and concerns of a pathway toward regulated nuclear fusion. 展开更多
关键词 Controllable nuclear fusion Ultra-Intense laser POSITRON POSITRON Generation ANTIMATTER TRIDENT PROCESS Bethe-Heitler PROCESS Breit-Wheeler PROCESS Volumetric IGNITION HOTSPOT IGNITION Fast IGNITION
下载PDF
Coulomb expansion of deuterated methane clusters irradiated by an ultrashort intense laser pulse
8
作者 李洪玉 刘建胜 +3 位作者 王成 倪国权 李儒新 徐至展 《Chinese Physics B》 SCIE EI CAS CSCD 2008年第4期1237-1241,共5页
The simulations of three-dimensional particle dynamics show that when irradiated by an ultrashort intense laser pulse, the deuterated methane cluster expands and the majority of deuterons overrun the more slowly expan... The simulations of three-dimensional particle dynamics show that when irradiated by an ultrashort intense laser pulse, the deuterated methane cluster expands and the majority of deuterons overrun the more slowly expanding carbon ions, resulting in the creation of two separated subelusters. The enhanced deuteron kinetic energy and a narrow peak around the energy maximum in the deuteron energy distribution make a considerable contribution to the efficiency of nuclear fusion compared with the ease of homonuelear deuterium clusters. With the intense laser irradiation, the nuclear fusion yield increases with the increase of the cluster size, so that deuterated heteronuelear clusters with larger sizes are required to achieve a greater neutron yield. 展开更多
关键词 deuterated methane cluster ultrashort intense laser pulse Coulomb explosion nuclear fusion
下载PDF
Fighting Climatic Change by NASEM with Help of Non-thermal Optical Laser Pressure
9
作者 Heinrich Hora 《Journal of Energy and Power Engineering》 2021年第5期163-168,共6页
For de-carbonisation of chemical energy generation,the use of ten million times higher nuclear energy per reaction is considered by the report of NASEM(National Academies of Science,Engineering and Medicine)of the USA... For de-carbonisation of chemical energy generation,the use of ten million times higher nuclear energy per reaction is considered by the report of NASEM(National Academies of Science,Engineering and Medicine)of the USA.This is considered with nuclear fusion reactions needing thermal pressures at many million degrees.This difficulty can be overcome by recent results of non-thermal pressures from very extreme CPA(Chirped Pulse Acceleration)laser pressures,with the clean fusion of hydrogen and boron=11 eliminating nuclear radiation problems. 展开更多
关键词 nuclear fusion using CPA lasers clean fusion of H with 11B non-thermal pressure
下载PDF
后加速内增强技术条纹相机及其非线性强度修正
10
作者 顾礼 杨方 杨勤劳 《深圳大学学报(理工版)》 CAS CSCD 北大核心 2024年第5期542-547,共6页
为实现X射线条纹相机大动态范围性能和精密化诊断,从光子密度探测阈值出发,研究条纹相机后加速内增强技术理论.降低记录系统灵敏度限制的光子密度探测阈值,有利于提高动态范围性能.研制后加速内增强技术条纹相机,组建超快实验标定系统,... 为实现X射线条纹相机大动态范围性能和精密化诊断,从光子密度探测阈值出发,研究条纹相机后加速内增强技术理论.降低记录系统灵敏度限制的光子密度探测阈值,有利于提高动态范围性能.研制后加速内增强技术条纹相机,组建超快实验标定系统,实验显示相机动态范围达2578∶1.相比具有饱和效应的微通道板内增强技术,该技术扩展了动态范围性能.方向角各不相同的电子入射栅网时,电子的透过率不同,从而导致电子在荧光屏上信号强度的非线性.给出成像区域强度误差分布及其修正方法,相比较未修正的动态范围,误差在7.7%.后加速内增强技术系统结构紧凑,有利于提高条纹相机动态范围,有助于实现中国激光惯性约束核聚变定量测量和精密化诊断目标. 展开更多
关键词 光电子学与激光技术 核仪器 惯性约束聚变 条纹相机 后加速技术 动态范围
下载PDF
全球可控核聚变发展态势研究
11
作者 温一村 《竞争情报》 2024年第4期60-65,共6页
核聚变技术因其巨大的潜力和环保优势而备受关注。回顾核聚变技术的发展历程,重点介绍激光约束核聚变和磁约束核聚变的最新进展。分析各国政府和私人企业在推动核聚变商业化方面的举措,并探讨未来实现商业化所面临的挑战。尽管技术和经... 核聚变技术因其巨大的潜力和环保优势而备受关注。回顾核聚变技术的发展历程,重点介绍激光约束核聚变和磁约束核聚变的最新进展。分析各国政府和私人企业在推动核聚变商业化方面的举措,并探讨未来实现商业化所面临的挑战。尽管技术和经济障碍仍然存在,但是国际合作和资金投入使得核聚变的实用化前景逐渐清晰。核聚变技术的商业化有望为全球能源供应带来革命性变化。 展开更多
关键词 可控核聚变 激光约束 磁约束 国际合作 私人投资
下载PDF
高陡度精密光学非球面CAM系统 被引量:6
12
作者 郑为民 曹天宁 +2 位作者 卢华云 江树木 朱小清 《光学技术》 EI CAS CSCD 1997年第4期35-40,共6页
本文提出了采用计算机控制光学表面成型(CCOS)技术用于高陡度精密光学非球面成型的一种方法,并阐述了CCOS的工艺流程,设计了相应的CAM系统。该系统具有五个运动自由度,通过使一个小磨盘作三维平动并同时摆动,旋转工件... 本文提出了采用计算机控制光学表面成型(CCOS)技术用于高陡度精密光学非球面成型的一种方法,并阐述了CCOS的工艺流程,设计了相应的CAM系统。该系统具有五个运动自由度,通过使一个小磨盘作三维平动并同时摆动,旋转工件而使磨头能始终垂直于加工点表面,以利加工高陡度非球面。此系统的加工口径可达φ300mm,相对孔径F=1.5。 展开更多
关键词 非球面 高陡度 光学表面 自动成型 CAM CCOS
下载PDF
实时监测激光核聚变靶球涂敷状态的CCD成像系统设计 被引量:2
13
作者 施柏煊 李彩凤 殷浩 《光电工程》 EI CAS CSCD 北大核心 2002年第1期30-33,共4页
介绍一种CCD成像系统的设计,它可应用于连续监测直径0.1-0.3mm的激光核聚变靶球涂敷时的实时状态。这个系统利用现成照相物镜和变焦显微物镜二次成像,配以场镜压缩轴外光线,和CCD传感器相组合,设计斜向视场上的二维扫描机构构成了可在8.... 介绍一种CCD成像系统的设计,它可应用于连续监测直径0.1-0.3mm的激光核聚变靶球涂敷时的实时状态。这个系统利用现成照相物镜和变焦显微物镜二次成像,配以场镜压缩轴外光线,和CCD传感器相组合,设计斜向视场上的二维扫描机构构成了可在8.2mm×44mm全视场扫描检测的CCD扫描成像系统,无论是空间分辨力或时间分辨力都达到了实时监测的要求,大大提高了靶球膜层的涂敷效率。 展开更多
关键词 CD成像系统 实时监测 激光核聚变 靶球 涂敷状态
下载PDF
超短超强激光及微团簇与大尺度团簇相互作用 被引量:7
14
作者 缪竞威 杨朝文 +13 位作者 安竹 袁学东 孙卫国 罗小兵 王虎 白立新 师勉恭 缪蕾 郑志坚 谷渝秋 刘洪杰 朱洲森 孙威立 廖雪花 《原子与分子物理学报》 CAS CSCD 北大核心 2007年第2期221-224,共4页
用2.5 MV静电加器提供的高品质微团簇束与固体、气体和大尺度团簇(100->1000原子/团簇)碰撞,超强飞秒激光与大尺度氘团簇相互作用,研究微团簇在大尺度团簇中的库仑爆炸特性,研究超短超强激光场中大尺度氘团簇的聚变机理.本文将介绍... 用2.5 MV静电加器提供的高品质微团簇束与固体、气体和大尺度团簇(100->1000原子/团簇)碰撞,超强飞秒激光与大尺度氘团簇相互作用,研究微团簇在大尺度团簇中的库仑爆炸特性,研究超短超强激光场中大尺度氘团簇的聚变机理.本文将介绍此项实验研究的进展. 展开更多
关键词 超短超强激光 原子团簇 库仑爆炸 核聚变
下载PDF
多量程X射线条纹相机研制 被引量:6
15
作者 顾礼 胡昕 +5 位作者 杨勤劳 廖华 蔡厚智 宗方轲 李翔 温龙燕 《深圳大学学报(理工版)》 EI CAS 北大核心 2011年第3期225-229,共5页
为满足惯性约束聚变(inertial confinement fusion,ICF)等离子体诊断的需求,研制多档位X射线条纹相机.该相机工作面积为25 mm×2 mm,8个工作量程,扫描速度可在16.11~0.11 mm/ns范围内变化,符合技术指标要求.搭建基于波长为266 nm... 为满足惯性约束聚变(inertial confinement fusion,ICF)等离子体诊断的需求,研制多档位X射线条纹相机.该相机工作面积为25 mm×2 mm,8个工作量程,扫描速度可在16.11~0.11 mm/ns范围内变化,符合技术指标要求.搭建基于波长为266 nm紫外激光器的X射线条纹相机联调实验系统,测试得到相机时间分辨优于45 ps,动态范围达到127,7个扫描速度非线性优于3%. 展开更多
关键词 光电子学与激光技术 核仪器 惯性约束聚变 条纹相机 标定 扫描速度 动态范围
下载PDF
激光焊接核电用CLF-1钢的组织与性能 被引量:3
16
作者 徐国建 井志成 +2 位作者 张国瑜 刘祥宇 廖洪彬 《沈阳工业大学学报》 CAS 北大核心 2022年第3期277-282,共6页
为了提高CLF-1钢的焊接质量,采用激光焊接技术获得了成形良好且无冶金缺陷的对接焊缝,研究了焊态与PWHT态下的焊缝组织和力学性能.结果表明:焊缝组织均由大量马氏体及少量δ-铁素体组成;焊态下有微量针状碳化物析出,PWHT态下析出的点状... 为了提高CLF-1钢的焊接质量,采用激光焊接技术获得了成形良好且无冶金缺陷的对接焊缝,研究了焊态与PWHT态下的焊缝组织和力学性能.结果表明:焊缝组织均由大量马氏体及少量δ-铁素体组成;焊态下有微量针状碳化物析出,PWHT态下析出的点状碳化物分布在δ-铁素体边界与板条马氏体内部;与焊态相比,PWHT态焊缝抗拉强度降低,而屈服强度、伸长率和断面收缩率均提高,维氏硬度均值降低;拉伸试样均断裂于远离焊接接头的母材处;由于δ-铁素体的存在,焊态和PWHT态焊缝冲击功均低于母材. 展开更多
关键词 激光焊接 CLF-1钢 核聚变 热处理 Δ-铁素体 析出相 显微组织 力学性能
下载PDF
人类首次实现聚变“点火”,激光聚变取得历史性突破 被引量:3
17
作者 郑万国 齐红基 《人工晶体学报》 CAS 北大核心 2023年第1期1-7,F0004,共8页
2022年12月13日,美国能源部(DOE)及其下属的国家核安全管理局(NNSA)宣布,劳伦斯利弗莫尔国家实验室(LLNL)利用其建立的国家“点火”装置(NIF),在人类历史上首次实现了聚变产能大于驱动聚变发生的激光能量这一“点火”里程碑,将为美国核... 2022年12月13日,美国能源部(DOE)及其下属的国家核安全管理局(NNSA)宣布,劳伦斯利弗莫尔国家实验室(LLNL)利用其建立的国家“点火”装置(NIF),在人类历史上首次实现了聚变产能大于驱动聚变发生的激光能量这一“点火”里程碑,将为美国核武器物理规律和效应研究、核武器库存管理等提供重要支撑,为未来清洁能源的发展铺平新的道路,并为高能量密度物理研究提供新的手段和平台。本文专访了中国工程物理研究院激光聚变研究中心郑万国研究员,就发布会传递信息、惯性约束聚变(ICF)实现途径及存在难点、激光聚变“点火”历程、未来ICF和惯性聚变能(IFE)发展前景,以及激光晶体在ICF和IFE中重要作用等业界广泛关心的几个问题进行解读,以期为读者提供专业的信息,使大家进一步了解ICF发展趋势和IFE发展前景,并针对相关晶体材料开展基础研究及关键技术攻关,牵引和支撑未来激光聚变驱动装置建设。 展开更多
关键词 聚变“点火” 国家“点火”装置 可控核聚变 惯性约束聚变 聚变能 激光晶体 非线性晶体
下载PDF
分压电路对X射线条纹相机成像稳定性的影响 被引量:2
18
作者 顾礼 李翔 +3 位作者 宗方轲 周军兰 杨勤劳 郭宝平 《深圳大学学报(理工版)》 EI CAS CSCD 北大核心 2017年第5期532-536,共5页
在X射线条纹相机静态测试中,发现分压电路的稳定性显著影响条纹相机成像性能.为提高成像稳定性,对分压电路进行测试,发现分压电路输出不稳定性由电流热效应导致,对此采用小电流分压电路方法,以降低电流热效应.测试和比较了两种分压电路... 在X射线条纹相机静态测试中,发现分压电路的稳定性显著影响条纹相机成像性能.为提高成像稳定性,对分压电路进行测试,发现分压电路输出不稳定性由电流热效应导致,对此采用小电流分压电路方法,以降低电流热效应.测试和比较了两种分压电路的电压和电流输出,条纹相机静态成像性能和系统调制传递函数.理论分析和实验结果表明,相机在使用小电流分压电路加电20 min后,工作电流、温度及电子透镜焦距分别改变了1.4%、7.5%和0.14%,静态成像以及系统调制传递函数均优于原有方法. 展开更多
关键词 光电子学与激光技术 惯性约束聚变 核仪器 X射线条纹相机 条纹变像管 分压电路 调制传递函数
下载PDF
托卡马克第一壁涂层工艺方法的比较 被引量:2
19
作者 张建中 刘常乐 《新技术新工艺》 2006年第9期73-75,共3页
托卡马克第一壁直接面向高温等离子体,它的性能优劣影响热核聚变的稳态反应。讨论了第一壁材料的选取情况,比较了几种常用的托卡马克第一壁涂层工艺,提出了应用宽带激光熔覆方法进行激光-粉末耦合第一壁的新思路,并对该制造方法进行了... 托卡马克第一壁直接面向高温等离子体,它的性能优劣影响热核聚变的稳态反应。讨论了第一壁材料的选取情况,比较了几种常用的托卡马克第一壁涂层工艺,提出了应用宽带激光熔覆方法进行激光-粉末耦合第一壁的新思路,并对该制造方法进行了设计。激光熔覆技术为制造第一壁涂层提供了一种新的工艺途径。 展开更多
关键词 核聚变 托卡马克 第一壁 激光熔覆 工艺设计
下载PDF
强激光场中氘团簇双重膨胀引发核聚变
20
作者 安伟科 邱锡钧 +1 位作者 蒋懿 朱志远 《原子核物理评论》 CAS CSCD 北大核心 2004年第2期180-182,共3页
在超强fs激光与氘团簇的相互作用中 ,分析了可以引发核聚变的高能氘核产生的原因 ,提出了团簇双重膨胀的机制 ,计算了氘核动能及团簇解体的时间 ,为选取合适的激光脉冲宽度参数提供参考 .
关键词 双重膨胀 核聚变 fs强激光 氘团簇 脉冲宽度
下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部