MOF-Like 3D Graphene-Based Catalytic Membrane Fabricated by One-Step Laser Scribing for Robust Water Purification and Green Energy Production

Increasing both clean water and green energy demands for survival and development are the grand challenges of our age.Here,we successfully fabricate a novel multifunctional 3D graphene-based catalytic membrane(3D-GCM)with active metal nanoparticles(AMNs)loading for simultaneously obtaining the water purification and clean energy generation,via a“green”one-step laser scribing technology.The as-prepared 3D-GCM shows high porosity and uniform distribution with AMNs,which exhibits high permeated fluxes(over 100 L m^(−2) h^(−1))and versatile super-adsorption capacities for the removal of tricky organic pollutants from wastewater under ultra-low pressure-driving(0.1 bar).After adsorption saturating,the AMNs in 3D-GCM actuates the advanced oxidization process to self-clean the fouled membrane via the catalysis,and restores the adsorption capacity well for the next time membrane separation.Most importantly,the 3D-GCM with the welding of laser scribing overcomes the lateral shear force damaging during the long-term separation.Moreover,the 3D-GCM could emit plentiful of hot electrons from AMNs under light irradiation,realizing the membrane catalytic hydrolysis reactions for hydrogen energy generation.This“green”precision manufacturing with laser scribing technology provides a feasible technology to fabricate high-efficient and robust 3D-GCM microreactor in the tricky wastewater purification and sustainable clean energy production as well.

High-rate metal-free MXene microsupercapacitors on paper substrates

MXene is a promising energy storage material for miniaturized microbatteries and microsupercapacitors(MSCs).Despite its superior electrochemical performance,only a few studies have reported MXene-based ultrahigh-rate(>1000 mV s^(−1))on-paper MSCs,mainly due to the reduced electrical conductance of MXene films deposited on paper.Herein,ultrahigh-rate metal-free on-paper MSCs based on heterogeneous MXene/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)-stack electrodes are fabricated through the combination of direct ink writing and femtosecond laser scribing.With a footprint area of only 20 mm^(2),the on-paper MSCs exhibit excellent high-rate capacitive behavior with an areal capacitance of 5.7 mF cm^(−2)and long cycle life(>95%capacitance retention after 10,000 cycles)at a high scan rate of 1000 mV s^(−1),outperforming most of the present on-paper MSCs.Furthermore,the heterogeneous MXene/PEDOT:PSS electrodes can interconnect individual MSCs into metal-free on-paper MSC arrays,which can also be simultaneously charged/discharged at 1000 mV s^(−1),showing scalable capacitive performance.The heterogeneous MXene/PEDOT:PSS stacks are a promising electrode structure for on-paper MSCs to serve as ultrafast miniaturized energy storage components for emerging paper electronics.

Laser scribed graphene for supercapacitors

Supercapacitors,with the merits of both capacitors for safe and fast charge and batteries for high energy storage have drawn tremendous attention.Recently,laser scribed graphene has been increasingly studied for supercapacitor applications due to its unique properties,such as flexible fabrication,large surface area and high electrical conductivity.With the laser direct writing process,graphene can be directly fabricated and patterned as the supercapacitor electrodes.In this review,facile laser direct writing methods for graphene were firstly summarized.Various precursors,mainly graphene oxide and polyimide were employed for laser scribed graphene and the modifications of graphene properties were also discussed.This laser scribed graphene was applied for electrochemical double-layer capacitors,pseudo-capacitors and hybrid supercapacitors.Diverse strategies including doping,composite materials and pattern design were utilized to enhance the electrochemical performances of supercapacitors.Featured supercapacitors with excellent flexible,ultrafinestructured and integrated functions were also reviewed.

Fabrication of Humidity Sensors Based on Laser Scribed Graphene Oxide/SnO Composite Layers

Humidity sensors have been widely applied to detect environment humidity in various fields. However, most of humidity sensors cannot provide performance needed for high sensitivity and fast response. We report one type of capacitive-type humidity sensors composed of laser-scribed graphene(LSG) as sensing electrodes and graphene oxide/tin dioxide(GO/SnO2) as a sensing layer. The LSG is reduced graphene oxide(rGO) electrodes resulted from selective reducing of GO within a GO/SnO2 composite layer by laser scribing method, and the sensing layer is the un-scribed GO/SnO2 composite. The sensor fabrication is a one-step process which is facile and cost-efficient. When a mass ratio of GO:SnO2 in the composite reaches 1:1, the humidity sensor(named as LSG-GS1) has the best properties than other ratios, which exhibits high sensitivity in the range of 11%~97% relative humidity(RH). In addition, the LSG-GS1 also has very quick response/recovery time(20 s for adsorption and 18 s for desorption) when RH changes from 23% to 84%, and very good stability after monitoring for 41 days. Such excellent performances of the humidity sensor can be attributed to synergistic effect of SnO2 and GO within the composite layer.