Measurement of the surface morphology of plasma facing components on the EAST tokamak by a laser speckle interferometry approach

The laser speckle interferometry approach provides the possibility of an in situ optical noncontacted measurement for the surface morphology of plasma facing components(PFCs),and the reconstruction image of the PFC surface morphology is computed by a numerical model based on a phase unwrapping algorithm.A remote speckle interferometry measurement at a distance of three meters for real divertor tiles retired from EAST was carried out in the laboratory to simulate a real detection condition on EAST.The preliminary surface morphology of the divertor tiles was well reproduced by the reconstructed geometric image.The feasibility and reliability of this approach for the real-time measurement of PFCs have been demonstrated.

Laser speckle contrast imaging to predict the effect of temporary spinal cord stimulation in postherpetic neuralgia patients: A prospective observational study

Temporary spinal cord stimulation(tSCS)can effectively reduce the pain and severity of postherpetic neuralgia(PHN).However,there are no effective and objective methods for predicting the effects of tSCS on PHN.Laser speckle contrast imaging(LSCI)is frequently used in neurology to evaluate the effectiveness of treatment.To assess the accuracy of LSCI in predicting the impact of tSCS on PHN,14 adult patients receiving tSCS treatments for spinal nerve-innervated(C6-T2)PHN participated in this observational study.Visual analog scale(VAS)assessments and LSCI bloodflow images of the-ngers were recorded after the tSCS procedure.The results showed that the VAS scores of all patients decreased signi-cantly.Moreover,the bloodflow index(BFI)values were signi-cantly higher than they were before the procedure.Increased bloodflow and pain alleviation were positively correlated.The-ndings indicated that spinal nerve PHN(C6-T2)was signi-cantly reduced by tSCS.Pain alleviation by tSCS was positively correlated with increased bloodflow in the hand.The effect of tSCS on PHN may thus be predicted using an independent and consistent indicator such as LSCI.

Diagnosis of the surface morphology of laser-ablated materials using the weightedDCT approach in laser speckle interferometry for application to plasma facing materials

To implement on-line, real-time monitoring for the surface morphology of Plasma-Facing Materials(PFMs) in tokamak, we developed a Laser Speckle Interferometry measurement approach. A laser ablation method was used to simulate the erosion process during Plasma-Wall Interactions in a tokamak. In the present investigation, we evaluated the results of laser ablation morphology changes on the surface of Mo material reconstructed by four different approaches(Flood-fill, Quality-guided, Discrete Cosine Transform(DCT) and Weighted-DCT). The morphology results measured by the weighted-DCT approach are very close to the measurement results from confocal microscopy with an average error rate within 7%. It is verified that the weighted-DCT algorithm has high accuracy and can efficiently reduce the influence of noise pollution coming from laser ablation, which is used as a proxy for erosion from plasma wall interaction. Additionally, the CPU computer time has been shortened. This is of great significance for the real-time monitoring of PFMs’ morphology in the Experimental Advanced Superconducting Tokamak(EAST) in the future.

Transmissive multifocal laser speckle contrast imaging through thick tissue

Laser speckle contrast imaging(LSCI)is a powerful tool for monitoring blood flow changes in tissue or vessels in vivo,but its applications are limited by shallow penetration depth under reflective imaging configuration.The traditional LSCI setup has been used in transmissive imaging for depth extension up to 2l_(t)–3l_(t)(l_(t)is the transport mean free path),but the blood flow estimation is biased due to the depth uncertainty in large depth of field(DOF)images.In this study,we propose a transmissive multifocal LSCI for depth-resolved blood flow in thick tissue,further extending the transmissive LSCI for tissue thickness up to 12lt.The limited-DOF imaging system is applied to the multifocal acquisition,and the depth of the vessel is estimated using a robust visibility parameter V_(r)in the coherent domain.The accuracy and linearity of depth estimation are tested by Monte Carlo simulations.Based on the proposed method,the model of contrast analysis resolving the depth information is established and verified in a phantom experiment.We demonstrated its effectiveness in acquiring depth-resolved vessel structures and flow dynamics in in vivo imaging of chick embryos.

Application of Laser Speckle Technology on the Detection of Agricultural Products

[Objective] The research aimed at investigating the application of laser speckle technology in agricultural products detection.[Method] This article described the basic principle of the laser speckle technology,provided a review of application development of the laser speckle technology in agricultural products detection,analyzed the problems in agriculture products detection using laser speckle technology and described the prospects of laser speckle technology in agricultural products detection.[Result] The laser speckle technology is a non-destructive detection technology for quality determination of agricultural products,which can be used to classify the agricultural products reasonably according to the quality of agricultural products.[Conclusion] The article provided reference and consult for laser speckle detection technology research.

Modified Laser Speckle Imaging with Adaptive Window

One of the advantages of laser speckle is detecting microvascular through image processing. This paper proposes a new image processing method for laser speckle, adaptive window method that adaptively processes laser speckle images in the space. Disadvantage of conventional fixed window method is that it uses the same window size regardless of target areas. Inherently laser speckle contains undesired noise. Thus a large window is helpful for removing the noise, but it results in low resolution of image. Otherwise a small window may detect micro vascular but it has limits in noise removal. To overcome this trade-off, the concept of adaptive window method is newly introduced to conventional laser speckle image analysis. In addition, the modified adaptive window method applied to other selection images. We have compared conventional Laser Speckle Contrast Analysis （LASCA） and its variants with the proposed method in terms of image quality and processing complexity, Moreover compared the result of the accompamed changing sdection images have also been compared.

Laser speckle contrast imaging for monitoring of acutepancreatitis at ischemia-reperfusion injury of thepancreas in rats

The influence of ischemia-reperfusion(I/R)action on pancreatic blood flow(PBF)and the development of acute pancreatitis(AP)in laboratory rats is evaluated in vivo by using the laser speckle contrast imaging(LSCI).Additionally,the optical properties in norm and under condition of AP in rats were assessed using a modied integrating sphere spectrometer and inverse Monte Carlo(IMC)software.The results of the experimental study of microcirculation of the pancreas in 82 rats in the ischemic model are presented.The data obtained conrm the fact that local ischemia and changes in the blood°ow velocity of the main vessels cause and provoke acute pancreatitis.

A New Method for Evaluating Regional Cerebral Blood Flow Changes:Laser Speckle Contrast Imaging in a C57BL/6J Mouse Model of Photothrombotic Ischemia

The present study aimed to improve the processing of data acquired from laser speckle contrast imaging（LSCI） to provide a standardization method to explore changes in regional cerebral blood flow（r CBF） and to determine the correlations among r CBF, cerebral ischemic lesion volume and microvascular density over time in a focal ischemic region. C57BL/6J mice were subjected to focal photothrombotic（PT） ischemia. r CBF was measured using LSCI at different time points before and after PT ischemia through an intact skull. Standardized r CBF（Sr CBF）, defined as the ratio of r CBF measured in the ipsilateral region of interest（ROI） to that in the corresponding contralateral region, was calculated to evaluate potential changes. In addition, the volume of the ischemic lesion and the microvascular density were determined using Nissl staining and immunofluorescence, respectively. The relationships among the ischemic lesion volume, microvascular density and Sr CBF were analyzed over time. The results showed that the cortical r CBF measured using LSCI following PT ischemia in the C57BL/6J mice gradually increased. Changes in the cerebral ischemic lesion volume were negatively correlated with Sr CBF in the ischemic region. Changes in the microvascular density were similar to those observed in Sr CBF. Our findings indicate that LSCI is a practical technique for observing changes in murine cortical r CBF without skull opening and for analyzing the relationships among the ischemic lesion volume, microvascular density and Sr CBF following focal cerebral ischemia. Preliminary results also suggest that the use of LSCI to observe the formation of collateral circulation is feasible.

Confocal laser speckle autocorrelation imaging of dynamic flow in microvasculature

Laser speckle imaging has been widely used for in-vivo visualization of blood perfusion in biological tissues.However,existing laser speckle imaging techniques suffer from limited quantification accuracy and spatial resolution.Here we re-port a novel design and implementation of a powerful laser speckle imaging platform to solve the two critical limitations.The core technique of our platform is a combination of line scan confocal microscopy with laser speckle autocorrelation imaging,which is termed Line Scan Laser Speckle Autocorrelation Imaging(LS-LSAI).The technical advantages of LS-LSAI include high spatial resolution(~4.4μm)for visualizing and quantifying blood flow in microvessels,as well as video-rate imaging speed for tracing dynamic flow.

Improving sampling depth of laser speckle imaging by topical optical clearing:A theoretical and in vivo study

The effect of optical cleaning method combined with laser speckle imaging(LSI)was discussed to improve the detection depth of LSI due to high scattering characteristics of skin,which limit its clinical application.A double-layer skin tissue model embedded with a single blood vessel was established,and the Monte Carlo method was used to simulate photon propagation under the action of light-permeating agent.808 nm semiconductor and 632.8 nm He–Ne lasers were selected to study the e®ect of optical clearing agents(OCAs)on photon deposition in tissues.Results show that the photon energy deposition density in the epidermis increases with the amount of tissue°uid replaced by OCA.Compared with glucose solution,polyethylene glycol 400(PEG 400)and glycerol can considerably increase the average penetration depth of photons in the skin tissue,thereby raising the sampling depth of the LSI.After the action of glycerol,PEG 400,and glucose,the average photon penetration depth is increased by 51.78%,51.06%,and 21.51%for 808nm,68.93%,67.94%,and 26.67%for 632.8 nm lasers,respectively.In vivo experiment by dorsal skin chamber proves that glycerol can cause a substantial decrease in blood°ow rate,whereas PEG 400 can signicantly improve the capability of light penetration without a®ecting blood velocity,which exhibits considerable potential in the monitoring of blood°ow in skin tissues.

ASSESSMENT OF OPTICAL CLEARING INDUCED IMPROVEMENT OF LASER SPECKLE CONTRAST IMAGING

Laser Speckle Contrast Imaging(LSCI)plays an important role in studying blood flow,but suffers from limited penetration depth of light in turbid tissue.The strong scattering of tissue obviously reduces the image contrast which decreases the sensitivity to flow velocity.Some image processing or optical clearing methods have been proposed to lessen the deficiency,but quantitative assessment of improvement is seldom given.In this study,LSCI was applied to monitor the blood flow through a capillary embedded within various tissue phantoms at depths of 0.25,0.45,0.65,0.85 and 1.05 mm,and the flow velocity in capillary was controllable from 0 to 4mm/s.Here,glycerol,a common optical clearing agent,was mixed with Intralipid at different volume ratio to make the reduced scattering coefficient of tissue phantom decrease from 13.00 to 0.50 cm−1.The quantitative analysis demonstrates that the optical clearing method can obviously enhance the image contrast,imaging depth,and sensitivity to blood flow velocity.Comparing the Laser Speckle Contrast Analysis methods and the optical clearing method,we find that for typical turbid tissue,the sensitivity to velocity estimated by the Laser Speckle Temporal Contrast Analysis(LSTCA)is twice of that by the Laser Speckle Spatial Contrast Analysis(LSSCA);while the sensitivity to velocity estimated by using the two analysis methods has a 10-fold increase,respectively,if addition of glycerol makes the reduced scattering coefficient of tissue phantom decrease by 30%.Combining the LSTCA and the optical clearing method,the sensitivity to flow velocity will be further enhanced.

LASER SPECKLE MOVEMENT CAUSED BY SURFACE DEFORMATION AND LIGHT WAVELENGTH CHANGE

When a surface is illuminated by laser,the field of diffusing reflective light can be described by Fresnel-Kirchhoff integration in the region of Fresnel.If the correlation,before and after the change of intensity field,is analysed by statistical method,three governing equations for variations of intensity field and speckle movement formulas can be obtained.In these equations,the surface motion,deformation and wavelength change are all considered to cause the speckle movement.

Hidden stage of intracranial hemorrhage in newborn rats studied with laser speckle contrast imaging and wavelets

Using the laser speckle contrast imaging and wavelet-based analyses,we investigate a latent("hidden")stage of the development of intracranial hemorrhages(ICHs)in newborn rats.We apply two measures based on the continuous wavelet-transform of blood flow velocity in the sagittal sinus,namely,the spectral energy in distinct frequency ranges and a multiscality degree characterizing complexity of experimental data.We show that the wavelet-based multifractal formalism reveals changes in the cerebrovascular blood flow at the development of ICH.

IN VIVO MAPPING BRAIN MICROCIRCULATION BY LASER SPECKLE CONTRAST IMAGING:A MAGNETIC RESONANCE PERSPECTIVE OF THEORETICAL FRAMEWORK

The fundamental limitations of most vascular-based functional neuroimaging techniques are placed by the fact how fine the brain regulates the blood supply system.In vivo mapping of the cerebral microcirculation with high resolution and sensitivity hence becomes unprecedentedly compelling.This paper reviews the theoretical background of the laser speckle contrast imaging(LSCI)technique and attempts to present a complete framework stemming from a simple biophysical model.Through the sensitivity analysis,more insights into the tool optimization are attained for in vivo applications.Open questions of the technical aspects are discussed within this unified framework.Finally,it concludes with a brief perspective of future research in a way analogous to the magnetic resonance imaging(MRI)technique.Such exploration could catalyze their development and initiate a technological fusion for precise assessment of blood flow across various spatial scales.

Measuring Vibration of Body with Speckle Interferometry

Speckle interferometry is an efficient method to analyze a vibration. In certain conditions, this technique has some outstanding advantage, and need not strict shock--proof condition, compared with the holographic method for measuring vibration. Therefore,it is suitable to analyze a vibration with a large amplitude.Real-time interferometry is a rapid and simple method for measuring vibration of a body, gives speckle pattern containing amplitude distribution of body-surface. By means of time-averaged method, the speckle pattern is recorded in Fourier transform plane, or vibration lines are seen directly with eyes, so as to analyze efficiently amplitude, phase, and model of a vibration. This paper deduces the intensity distribution function with real-time method, and gives experimental demonstration of vibration body-the vibration lines with different frequencies.

Plasma-based X-ray laser speckle and its application on ferroelectric material

A new type of soft X-ray source, i.e. a plasma-based X-ray laser, is found to be promising to conduct transient measurement. By means of picosecond X-ray laser speckles, the dynamic microscopic polarization clusters within cubic (paraelectric) BaTiO3 was directly observed and characterized in a microscopic scale for the first time. This opens a way to study this type of clusters, which usually manifest large external-field response for ferroelectric materials.

Taking the pulse of a plant:dynamic laser speckle analysis of plants

Ideally, to achieve optimal production in agriculture, crop stress needs to be measured in real-time, and plant inputs managed in response. However, many important physiological responses like photosynthesis are difficult to measure, and current trade-offs between cost, robustness, and spatial measurement capacity of available plant sensors may prevent practical in-field application of most current sensing techniques. This paper investigates a novel application of laser speckle imaging of a plant leaf as a sensor with an aim, ultimately, to detect indicators of crop stress: changes to the dynamic properties of leaf topography on the scale of the wavelength of laser light. In our previous published work, an initial prototype of the laser speckle acquisition system specific for plant status measurements together with data processing algorithms were developed. In this paper, we report a new area based statistical method that improves robustness of the data processing against disturbances from various sources. Water and light responses of the laser speckle measurements from cabbage leaves taken by the developed apparatus are exhibited via growth chamber experiments. Experimental evidence indicates that the properties of the laser speckle patterns from a leaf are closely related to the physiological status of the leaf. This technology has the potential to be robust, cost effective, and relatively inexpensive to scale.

Hydro-Adsorption Study by Dynamic Laser Speckle of Natural Zeolite for Adsorbent and Fertilizer Applications

The dynamic behavior caused by hydro-adsorption process of materials based on a rich mineral clinoptilolite together with their acidic, basic and calcinated forms has been studied by the dynamic laser speckle (DLS) technique. We propose a modified Peleg’s equation to improve fitting of DLS data. Textural (BET), structural (XRD) and spectroscopic (FTIR) properties were also studied and compared. We demonstrated that DLS was the most sensitive, simple and inexpensive method for comparing the performance of adsorptive materials with slightly modified surfaces. It also allowed the correlation with physicochemical properties.

Laser speckle contrast imaging based on uniting spatiotemporal Fourier transform

We propose a laser speckle contrast imaging method based on uniting spatiotemporal Fourier transform.First,the raw speckle images are entirely transformed to the spatiotemporal frequency domain with a three-dimensional(3D)fast Fourier transform.Second,the dynamic and static speckle components are extracted by applying 3D low-pass and high-pass filtering in the spatiotemporal frequency domain and inverse 3D Fourier transform.Third,we calculate the time-averaged modulation depth with the average of both components to map the two-dimensional blood flow distribution.The experiments demonstrate that the proposed method could effectively improve computational efficiency and imaging quality.

Laser speckle grayscale lithography:a new tool for fabricating highly sensitive flexible capacitive pressure sensors

Achieving a high sensitivity for practical applications has always been one of the main developmental directions for wearable flexible pressure sensors.This paper introduces a laser speckle grayscale lithography system and a novel method for fabricating random conical array microstructures using grainy laser speckle patterns.Its feasibility is attributed to the autocorrelation function of the laser speckle intensity,which adheres to a first-order Bessel function of the first kind.Through objective speckle size and exposure dose manipulations,we developed a microstructured photoresist with various micromorphologies.These microstructures were used to form polydimethylsiloxane microstructured electrodes that were used in flexible capacitive pressure sensors.These-1 sensors exhibited an ultra-high sensitivity:19.76 kPa for the low-pressure range of 0-100 Pa.Their minimum detection threshold was 1.9 Pa,and they maintained stability and resilience over 10,000 test cycles.These sensors proved to be adept at capturing physiological signals and providing tactile feedback,thereby emphasizing their practical value.