Stability of fiber laser-MIG hybrid welding of high strength aluminum alloy

The effect of fiber laser on MIG arc was investigated with 8 mm 7075-T6 high strength aluminum alloy as base material.The arc shape,droplet transfer form and electrical signal in the process of MIG welding and laser-MIG hybrid welding were analyzed.The stability of the hybrid welding process was evaluated by standard deviation analysis.The results show that with the increase of laser power,a large number of laser-induced plasma enters the arc column area,providing more conductive channels,which makes the heat of MIG arc more concentrated and the short circuit transition disappear.Due to the continuous effect of laser,the keyhole becomes a continuous electron emission source,and a stable cathode spot will be formed near the keyhole,which enhances the stability of MIG arc at the base current state.By using the method of standard deviation analysis,the voltage standard deviation of single MIG welding arc and laser-MIG hybrid arc within 4 seconds was calculated.The standard deviation of single MIG arc voltage was 1.05,and the standard deviation of MIG arc voltage in laser-MIG hybrid welding was 0.71–0.86,so the hybrid welding process was more stable.

CHARACTERISTICS OF DROPLET TRANSFER IN CO_2 LASER-MIG HYBRID WELDING WITH SHORTCIRCUITING MODE

LF6 aluminum alloy plates with 4.5 mm thickness are welded in this experiment. Welding is carried out by using the CO2 laser-MIG paraxial hybrid welding in fiat position. The experimental results indicate that the inherent droplet transfer cycle time of conventional MIG arc is changed due to the interaction between CO2 laser beam and MIG arc in the short-circuiting mode of laser-MIG hybrid welding. Because of the preheating action of CO2 laser to electrode and base material, the droplet transfer frequency of MIG arc is increased in the hybrid welding process. When laser power is increased to a certain degree, the droplet transfer frequency is decreased due to the effect of laser-induced keyhole. Furthermore, through analyzing the MIG welding current and arc voltage waveforms and the characteristics of droplet transfer in the hybrid welding process, the effect of laser energy and the action point between laser beam and arc on the frequency of droplet transfer and weld appearance is investigated in details.

Microstructure and mechanical properties of 6061 aluminum alloy laser-MIG hybrid welding joint

In this paper, 3 mm 6061 aluminum alloy sheets were welded by laser MIG hybrid welding. Based on the experiment, the best welding parameters were determined to ensure the penetration welding. The detailed microstructure,tensile and fatigue fracture morphology and surface fatigue damage of the welded joints were analyzed by optical microscope(OM), scanning electron microscope(SEM) and energy dispersive spectrometer(EDS). The results show that there are two main kinds of precipitates, one is the long Si rich precipitates at the grain boundaries, the other is the intragranular Cu rich precipitates. The tensile test results show that the tensile strength of the joint is 224 MPa, which is only 70.2% of the base metal. Through the analysis of tensile fracture, there are great differences in the formation of tensile dimple. In the tensile-tensile fatigue test with a stress rate of 0.1, the conditional fatigue limits of base metal and welded joint are 101.9 MPa and 54.4 MPa, respectively. By comparing the fatigue fracture of the welded joints under different stress amplitudes, it was found that the main factor leading to the fracture of the joint is porosity. Through further analysis of the pore defects, it was found that there are transgranular and intergranular propagation ways of microcracks in the pores, and the mixed propagation way was also found.

Mathematical analysis of the role of recoil pressure in weld pool dynamics during laser-MIG hybrid welding

A mathematical model was established to simulate the weld pool development and dynamic process in stationary iaser-MlG hybrid welding. Surface tension and buoyancy were considered to calculate liquid metal flow patter, moreover, typical phenomena of MIG welding, such as filler droplets impinging weld pool, electromagnetic force in the weld pool, and typical phenomena of laser beam welding, such as recoil pressure, Inverse Bremsstrahlung absorption, Fresnel absorption were all considered in the model. The laser beam and arc couple effect were introduced into this model by the plasma width during hybrid welding. The role of recoil pressure in the weld formation was discussed. Transient weld pool shape and complicated liquid metal velocity distribution from two kinds weld pool to an unified weld pool were calculated. The simulated weld bead geometry with consideration recoil pressure was in good agreement with experimental measurement.

Effect of Arc Energy on Morphology and Microstructure of Laser-MIG Hybrid Welded Joints of Invar Alloy

Laser-MIG hybrid welding experiments of 7 mm thick Invar alloy are carried out.The macro appearance of joints is observed and the influence of arc energy on the cross-section morphology is analyzed.The distribution of temperature field is simulated to explain the relationship between heat effect and microstructure.Besides,the average grain size of weld under different arc energies is quantitatively studied.The results indicate that welded joints with uniformity and good formation are obtained.The weld width and the weld seam area increase and the depth to width ratio decreases with the increase of arc heat input.The transition of columnar crystals to equiaxed crystals is observed from the fusion line to the weld center.It is found that the higher the arc energy,the coarser the columnar crystal.

Detection of butt weld of laser-MIG hybrid welding of thin-walled profile for high-speed train

Purpose–This study aims to solve the problem of weld quality inspection,for the aluminum alloy profile welding structure of high-speed train body has complex internal shape and thin plate thickness(2–4 mm),the conventional nondestructive testing method of weld quality is difficult to implement.Design/methodology/approach–In order to solve this problem,the ultrasonic creeping wave detection technology was proposed.The impact of the profile structure on the creeping wave detection was studied by designing profile structural test blocks and artificial simulation defect test blocks.The detection technology was used to test the actual welded test blocks,and compared with the results of X-ray test and destructive test(tensile test)to verify the accuracy of the ultrasonic creeping wave test results.Findings–It is indicated that that X-ray has better effect on the inspection of porosities and incomplete penetration defects.However,due to special detection method and protection,the detection speed is slow,which cannot meet the requirements of field inspection of the welding structure of aluminum alloy thin-walled profile for high-speed train body.It can be used as an auxiliary detection method for a small number of sampling inspection.The ultrasonic creeping wave can be used to detect the incomplete penetration welds with the equivalent of 0.25 mm or more,the results of creeping wave detection correspond well with the actual incomplete penetration defects.Originality/value–The results show that creeping wave detection results correspond well with the actual non-penetration defects and can be used for welding quality inspection of aluminum alloy thin-wall profile composite welding joints.It is recommended to use the echo amplitude of the 10 mm 30.2 mm 30.5 mm notch as the criterion for weld qualification.

The numerical simulation of laser-MIG hybrid welding for Invar alloy

Composites are widely applied to the manufacturing of aircraft in aviation. Forming of large-scale composite component in aircraft requires the corresponding mold with precise size. The laser-MIG hybrid welding has a significant advantage in the manufacturing of Invar mold for aircraft composites. This paper mainly introduces the application of the laser-MIG hybrid welding,and the distribution of thermal field and flow field on the Invar alloy laser-MIG hybrid three-layer welding is analyzed and discussed specifically.

Characteristic of laser-MIG hybrid welding with filling additional cold wire for aluminum alloy

The weld appearance, deposition rate, welding efficiency, stability of arc, laser keyhole characteristic, and weld property were studied by using a novel laser-MIG hybrid welding process with filling wire of aluminum alloy. The results were also compared with those by conventional laser-MIG hybrid welding process. It was found that with the suitable process parameters this novel welding process for aluminum alloy was stable and final weld bead had fine appearance. Compared to conventional laser-MIG hybrid welding process, during this novel welding process the stability of arc, the laser keyhole characteristic and the weld property were similar, while the keyhole cycle frequency and keyhole opening area had differences of 1.23% and 15.34%, respectively, and the welding efficiency increased by about 31% without increasing heat input.

Joint performance of CO2 laser-MIG hybrid welding 5083-H116 alloy

Laser-MIG hybrid welding process was dealt with 6 mm thick 5083Hl16 Al-Mg alloy plate in butt-joint configuration. Weld formation principle during hybrid welding was explained. The joint properties and microstructure characteristics of welded joints were analyzed by tensile tests, fractographs observed by optical microscopy and scanning electron microscopy （SEM）. Higher heat input could obtain better mechanical properties, and tensile strength and elongation reached 97.2%, 81% of the base metal, respectively. Fracture position traasited from fusion line to weld center in the higher heat input, and fracture location were only in the center of welded joints for the heat input relatively small.

颈椎前路Hybrid手术和颈椎后路单开门椎管扩大成形术治疗多节段脊髓型颈椎病临床疗效分析

目的:分析颈椎前路Hybrid手术和颈椎后路单开门椎管扩大成形术(EODL)治疗多节段脊髓型颈椎病的疗效,探讨多节段脊髓型颈椎病患者手术方式的选择。方法:对2017年7月—2020年7月在首都医科大学附属北京中医医院手术治疗的70例多节段脊髓型颈椎病患者进行回顾性分析,根据手术方式不同,分为前路组35例和后路组35例,前路组患者行Hybrid手术[颈椎前路椎间盘切除融合术(ACDF)联合人工颈椎间盘置换术(ACDR)],后路组患者行EODL。记录2组患者住院时间、手术时间、术中出血量和术后引流量,通过日本骨科协会(JOA)评分、JOA改善率、颈椎残障功能指数(NDI)、疼痛视觉模拟评分(VAS)和术后满意度评分进行疗效评价,统计2组患者术后并发症发生情况。结果:与后路组比较,前路组患者术中出血量、术后引流量、住院时间和手术时间均明显减少(P<0.01),术前各项评分差异无统计学意义(P>0.05)。末次随访时,与后路组比较,前路组患者JOA评分和JOA改善率明显升高(P<0.01),NDI评分和VAS评分明显降低(P<0.01)。与术前比较,末次随访时2组患者JOA评分明显升高(P<0.01),NDI和VAS评分均明显降低(P<0.01)。按术后满意度评分评价,2组患者术后满意度均较高。2组患者术后并发症发生率比较差异无统计学意义(P>0.05)。结论:颈椎前路Hybrid手术和EODL在治疗多节段脊髓型颈椎病方面均取得了较为满意的疗效。Hybrid手术具有出血量少和手术时间短等优点,临床上应根据患者实际情况选择最适宜的术式。

Activation Redistribution Based Hybrid Asymmetric Quantization Method of Neural Networks

The demand for adopting neural networks in resource-constrained embedded devices is continuously increasing.Quantization is one of the most promising solutions to reduce computational cost and memory storage on embedded devices.In order to reduce the complexity and overhead of deploying neural networks on Integeronly hardware,most current quantization methods use a symmetric quantization mapping strategy to quantize a floating-point neural network into an integer network.However,although symmetric quantization has the advantage of easier implementation,it is sub-optimal for cases where the range could be skewed and not symmetric.This often comes at the cost of lower accuracy.This paper proposed an activation redistribution-based hybrid asymmetric quantizationmethod for neural networks.The proposedmethod takes data distribution into consideration and can resolve the contradiction between the quantization accuracy and the ease of implementation,balance the trade-off between clipping range and quantization resolution,and thus improve the accuracy of the quantized neural network.The experimental results indicate that the accuracy of the proposed method is 2.02%and 5.52%higher than the traditional symmetric quantization method for classification and detection tasks,respectively.The proposed method paves the way for computationally intensive neural network models to be deployed on devices with limited computing resources.Codes will be available on https://github.com/ycjcy/Hybrid-Asymmetric-Quantization.

基于Hybrid A^(*)算法的变压器声级巡检系统研究与设计

随着国内变电站数目逐步增加,采用固定式声级监测终端对变压器声级检测的方式已经满足不了日常检测的需求。为解决固定式声级监测终端方式成本高、维护复杂、设备利用率低等问题,该文率先提出了一种变压器声级巡检系统,并设计了最优声级巡检路径。通过场地定位传感器生成变压器场地栅格图信息,采用Hybrid A^(*)算法将场地栅格图信息生成符合国标所要求的最优声级巡检路径检测点;针对所开发的变压器声级巡检装置,采用生成的巡检路径对变压器进行声级测定作业,对测定的声级数据进行分析处理。测试结果表明,该文开发的系统与设计算法的变压器声级巡检时间、检测效率以及数据的采集准确性都优于固定式声级监测终端方式,系统完成变压器声级巡检全过程的成功率可达95%。

复杂建设环境下基于Hybrid A^(*)算法的铁路平面线形绿色优化设计

随着“双碳经济下绿色铁路”理念的兴起,将“绿色生态”融入到铁路平面线路优化已成为近年来的研究热点。本文以铁路建设成本与生态破坏成本的协同优化为目标,引入并改进了一种自动驾驶导航算法(Hybrid A^(*)算法),以适应复杂的铁路设计问题,同时考虑最小曲线半径、最大曲线半径、最短曲线长度、最短夹直线长度、缓和曲线长度等铁路线形约束。研究结果表明:(1)改进后算法以离散网格方式整合外部环境因素,实现渐进式全局探索,获取接近全局最优的铁路线路设计结果;(2)该方法在复杂外部环境约束下,无需预设水平交点位置和数量,可自动生成符合线路-环境耦合约束的优化平面线路方案。

p-d Orbital Hybridization Engineered Single-Atom Catalyst for Electrocatalytic Ammonia Synthesis

The rational design of metal single-atom catalysts(SACs)for electrochemical nitrogen reduction reaction(NRR)is challenging.Two-dimensional metal-organic frameworks(2DMOFs)is a unique class of promising SACs.Up to now,the roles of individual metals,coordination atoms,and their synergy effect on the electroanalytic performance remain unclear.Therefore,in this work,a series of 2DMOFs with different metals and coordinating atoms are systematically investigated as electrocatalysts for ammonia synthesis using density functional theory calculations.For a specific metal,a proper metal-intermediate atoms p-d orbital hybridization interaction strength is found to be a key indicator for their NRR catalytic activities.The hybridization interaction strength can be quantitatively described with the p-/d-band center energy difference(Δd-p),which is found to be a sufficient descriptor for both the p-d hybridization strength and the NRR performance.The maximum free energy change(ΔG_(max))andΔd-p have a volcanic relationship with OsC_(4)(Se)_(4)located at the apex of the volcanic curve,showing the best NRR performance.The asymmetrical coordination environment could regulate the band structure subtly in terms of band overlap and positions.This work may shed new light on the application of orbital engineering in electrocatalytic NRR activity and especially promotes the rational design for SACs.

Enhancing rock fragmentation prediction in mining operations:A hybrid GWO-RF model with SHAP interpretability

In the mining industry,precise forecasting of rock fragmentation is critical for optimising blasting processes.In this study,we address the challenge of enhancing rock fragmentation assessment by developing a novel hybrid predictive model named GWO-RF.This model combines the grey wolf optimization(GWO)algorithm with the random forest(RF)technique to predict the D_(80)value,a critical parameter in evaluating rock fragmentation quality.The study is conducted using a dataset from Sarcheshmeh Copper Mine,employing six different swarm sizes for the GWO-RF hybrid model construction.The GWO-RF model’s hyperparameters are systematically optimized within established bounds,and its performance is rigorously evaluated using multiple evaluation metrics.The results show that the GWO-RF hybrid model has higher predictive skills,exceeding traditional models in terms of accuracy.Furthermore,the interpretability of the GWO-RF model is enhanced through the utilization of SHapley Additive exPlanations(SHAP)values.The insights gained from this research contribute to optimizing blasting operations and rock fragmentation outcomes in the mining industry.

Electrostatic Interaction-directed Construction of Hierarchical Nanostructured Carbon Composite with Dual Electrical Conductive Networks for Zinc-ion Hybrid Capacitors with Ultrastability

Metal-organic framework(MOF)-derived carbon composites have been considered as the promising materials for energy storage.However,the construction of MOF-based composites with highly controllable mode via the liquid-liquid synthesis method has a great challenge because of the simultaneous heterogeneous nucleation on substrates and the self-nucleation of individual MOF nanocrystals in the liquid phase.Herein,we report a bidirectional electrostatic generated self-assembly strategy to achieve the precisely controlled coatings of single-layer nanoscale MOFs on a range of substrates,including carbon nanotubes(CNTs),graphene oxide(GO),MXene,layered double hydroxides(LDHs),MOFs,and SiO_(2).The obtained MOF-based nanostructured carbon composite exhibits the hierarchical porosity(V_(meso)/V_(micro)∶2.4),ultrahigh N content of 12.4 at.%and"dual electrical conductive networks."The assembled aqueous zinc-ion hybrid capacitor(ZIC)with the prepared nanocarbon composite as a cathode shows a high specific capacitance of 236 F g^(-1)at 0.5 A g^(-1),great rate performance of 98 F g^(-1)at 100 A g^(-1),and especially,an ultralong cycling stability up to 230000 cycles with the capacitance retention of 90.1%.This work develops a repeatable and general method for the controlled construction of MOF coatings on various functional substrates and further fabricates carbon composites for ZICs with ultrastability.

Hybrid model for BOF oxygen blowing time prediction based on oxygen balance mechanism and deep neural network

The amount of oxygen blown into the converter is one of the key parameters for the control of the converter blowing process,which directly affects the tap-to-tap time of converter. In this study, a hybrid model based on oxygen balance mechanism (OBM) and deep neural network (DNN) was established for predicting oxygen blowing time in converter. A three-step method was utilized in the hybrid model. First, the oxygen consumption volume was predicted by the OBM model and DNN model, respectively. Second, a more accurate oxygen consumption volume was obtained by integrating the OBM model and DNN model. Finally, the converter oxygen blowing time was calculated according to the oxygen consumption volume and the oxygen supply intensity of each heat. The proposed hybrid model was verified using the actual data collected from an integrated steel plant in China, and compared with multiple linear regression model, OBM model, and neural network model including extreme learning machine, back propagation neural network, and DNN. The test results indicate that the hybrid model with a network structure of 3 hidden layer layers, 32-16-8 neurons per hidden layer, and 0.1 learning rate has the best prediction accuracy and stronger generalization ability compared with other models. The predicted hit ratio of oxygen consumption volume within the error±300 m^(3)is 96.67%;determination coefficient (R^(2)) and root mean square error (RMSE) are0.6984 and 150.03 m^(3), respectively. The oxygen blow time prediction hit ratio within the error±0.6 min is 89.50%;R2and RMSE are0.9486 and 0.3592 min, respectively. As a result, the proposed model can effectively predict the oxygen consumption volume and oxygen blowing time in the converter.

Production traits and fertility of reciprocal hybrids between Argopecten irradians irradians and A.i.concentricus

The two bay scallop subspecies,Argopecten irradians irradians(NN)and A.i.concentricus(SS),are fast growing and major cultured bivalves in China.However,their relatively small sizes and decreasing production traits caused by long-term inbreeding have been major concerns to the industry in the last two decades.Hybridization between the two bay scallop subspecies may provide a new approach to breed a new variety with superior production traits for the industry.For this end,in this study,we hybridized the two bay scallop subspecies in order to obtain a new strain that incorporates the genes of both subspecies.No significant difference was found in fertilization rate,hatching rate and metamorphosis rate between the purebred and crossbred cohorts(NN♀×SS♂,denoted as NS;SS♀×NN♂,denoted as SN).Both mating strategy(intra-vs.inter-population crosses)and egg origin had significant effects on growth and survival at the larval stage.Heterosis was observed in the crossbred and was more pronounced in older stages.Genetic diversity of the reciprocal hybrids,especially that of SN,was increased compared with the purebred cohorts.Almost all hybrids were completely fertile and able to reproduce by selffertilization or by backcrossing with either parent.Apparently,male sterile individuals whose gonads were fully occupied by the ovary part at mature stage were found in the hybrids for the first time.The hybrids,especially SN,may provide precious germplasm resources for the production of ternary hybrids with the Peruvian scallop,A.purpuratus.

Total Fat, Fatty Acid Composition, Tocopherol and Tocotrienol Profiles in Fermented Beans of Ten Controlled Pollinated Cocoa (Theobroma cacao L.) Hybrids from Cameroon

This study aimed to discriminate ten Cameroonian cocoa hybrids according to their total fat, fatty acid composition, tocopherol and tocotrienol profiles. Six cocoa clones from the gene banks of the Cameroon Cocoa Development Corporation were used to create hybrids. The determination of fatty acid composition was carried out by using a gas chromatography (GC) apparatus coupled by a flame ion detector (FID). Tocopherol and tocotrienol analysis was performed by upper high-performance liquid chromatography (UHPLC). Information on the impact of the genotype on the cocoa fat composition was provided. The major fatty acids (FA) in fermented samples are stearic (34.57%), palmitic (26.13%), oleic (34.13%) and linoleic (3.16%) acids. (35.05% to 35.6%). SCA12 × ICS40, SCA12 × SNK13, SNK13 × T79/501 have the least hard cocoa butters. Tocopherols analysis showed a predominance of γ-tocopherols (94.64 ± 1.51 to 292.16 ± 3.17 µg∙g−1), whereas only a small amount of β and δ-tocopherol (from 0.46 to 2.78 µg∙g−1 and 0.12 to 5.82 respectively) was observed. No γ-tocotrienol was found in fermented samples. A differentiation in terms of total fat and tocopherol content was observed amongst hybrids with the same mother-clone, suggesting an impact of pollen on these compounds.

Hybrid Dynamic Variables-Dependent Event-Triggered Fuzzy Model Predictive Control

This article focuses on dynamic event-triggered mechanism(DETM)-based model predictive control(MPC) for T-S fuzzy systems.A hybrid dynamic variables-dependent DETM is carefully devised,which includes a multiplicative dynamic variable and an additive dynamic variable.The addressed DETM-based fuzzy MPC issue is described as a “min-max” optimization problem(OP).To facilitate the co-design of the MPC controller and the weighting matrix of the DETM,an auxiliary OP is proposed based on a new Lyapunov function and a new robust positive invariant(RPI) set that contain the membership functions and the hybrid dynamic variables.A dynamic event-triggered fuzzy MPC algorithm is developed accordingly,whose recursive feasibility is analysed by employing the RPI set.With the designed controller,the involved fuzzy system is ensured to be asymptotically stable.Two examples show that the new DETM and DETM-based MPC algorithm have the advantages of reducing resource consumption while yielding the anticipated performance.