Trajectory Design and Flight Result of Gravity-1 Launch Vehicle

Gravity-1(YL-1) launch vehicle completed its maiden flight from the Yellow Sea near Haiyang City, Shandong Province, on January 11, 2024, this mission successfully launched three Yunyao satellites into their 500 km orbit. The YL-1 has a performance of 4.2 tons for 500 km sun-synchronous orbit and 6.5 tons for low Earth orbit. The success of YL-1 has further enriched China's launch vehicle spectrum, and will facilitate the launch of medium and large satellites and satellite constellations. In this paper, the flight ballistic solution of YL-1 is introduced. The flight trajectory consists of seven flight segments. The trajectory design comprehensively considered the characteristics and safety requirements of the vehicle to achieve effective utilization of the performance. Through comparative analysis of the flight trajectory and the predicted trajectory, the result confirmed that the flight trajectory was consistent with the design results, the design methodology was correct, and the flight test met the expected requirements. Subsequently, the vehicle will be employed for commercial application launch services.

Technical Characteristics and Innovations of the Gravity-1 Launch Vehicle

On January 11, 2024, the Gravity-1 launch vehicle successfully carried out its maiden flight from a mobile sea platform off the coast of Haiyang in Shandong Province, sending three meteorological satellites, Yunyao-1 satellite No. 18-20, into an orbit about 500 km above the ground. The successful debut flight of Gravity-1 broke many records such as the world's largest solid launch vehicle, the first sea-launched strap-on launch vehicle in the world, with the maximum carrying capacity of current commercial launch vehicle in China. This flight marked a big step in the field of China's commercial space launch application. A new breakthrough has been made, which is of great significance for further expanding China's diversified and large-scale launch capabilities of medium and low orbit satellites, expanding the spectrum of China's launch vehicle types, and promoting the development of space science.

Study on the coupling calculation method for the launch dynamics of a self-propelled artillery multibody system considering engraving process

The launch dynamics theory for multibody systems emerges as an innovative and efficacious approach for the study of launch dynamics,capable of addressing the challenges of complex modeling,diminished computational efficiency,and imprecise analyses of system dynamic responses found in the dynamics research of intricate multi-rigid-flexible body systems,such as self-propelled artillery.This advancement aims to enhance the firing accuracy and launch safety of self-propelled artillery.Recognizing the shortfall of overlooking the band engraving process in existing theories,this study introduces a novel coupling calculation methodology for the launch dynamics of a self-propelled artillery multibody system.This method leverages the ABAQUS subroutine interface VUAMP to compute the dynamic response of the projectile and barrel during the launch process of large-caliber self-propelled artillery.Additionally,it examines the changes in projectile resistance and band deformation in relation to projectile motion throughout the band engraving process.Comparative analysis of the computational outcomes with experimental data evidences that the proposed method offers a more precise depiction of the launch process of self-propelled artillery,thereby enhancing the accuracy of launch dynamics calculations for self-propelled artillery.

Experimental research on the launching system of auxiliary charge with filter cartridge structure

A launching system with a filter cartridge structure was proposed to improve the muzzle velocity of the projectile.The combustion chamber of the launching system is divided into two fixed chambers,one is located in the breech chamber,and the other is arranged in the barrel.The breech chamber charge was ignited first,and the charges in the auxiliary chambers were ignited by the high-temperature,highpressure combustible gas trailing the projectile.In this way,the combustible gas in the auxiliary chambers could compensate for the pressure drop caused by the movement of the projectile.The proposed device features the advantage of launching a projectile with high muzzle velocity without exceeding the maximum pressure in the chamber.In order to obtain some internal ballistic characteristics of the launch system,some critical structure,such as the length of the filter cartridge auxiliary charge,the combustion degree of the propellant in the chamber,and the length of the barrel,are discussed.The experimental results show that with the increased auxiliary charge length,a pressure plateau or even a secondary peak pressure can be formed,which is less than the peak pressure.The projectile velocity increased by 23.57%,14.64%,and 7.65%when the diaphragm thickness was 0 mm,1 mm,and2 mm,respectively.The muzzle velocity of the projectile can be increased by 13.42%by increasing the length of the barrel.Under the same charge condition,with the increase of barrel length,the energy utilization rate of propellant increases by 28.64%.

A CombustionModel for Explosive Charge Affected by a Bottom Gap in the Launch Environment

Launch safety of explosive charges has become an urgent problem to be solved by all countries in the world aslaunch situation of ammunition becomes consistentlyworse.However, the existing numericalmodels have differentdefects. This paper formulates an efficient computational model of the combustion of an explosive charge affectedby a bottom gap in the launch environment in the context of the material point method. The current temperatureis computed accurately from the heat balance equation, and different physical states of the explosive charges areconsidered through various equations of state. Microcracks in the explosive charges are described with respectto the viscoelastic statistical crackmechanics (Visco–SCRAM) model. Themethod for calculating the temperatureat the bottomof the explosive charge with respect to the bottomgap is described. Based on this combustionmodel,the temperature history of a Composition B (COMB) explosive charge in the presence of a bottom gap is obtainedduring the launch process of a 155-mm artillery. The simulation results show that the bottom gap thickness shouldbe no greater than 0.039 cm to ensure the safety of the COM B explosive charge in the launch environment. Thisconclusion is consistent with previous results and verifies the correctness of the proposed model. Ultimately, thispaper derives amathematical expression for themaximumtemperature of the COMB explosive chargewith respectto the bottomgap thickness (over the range of 0.00–0.039 cm), and establishes a quantitative evaluationmethod forthe launch safety of explosive charges.The research results provide some guidance for the assessment and detectionof explosive charge safety in complex launch environments.

Configuration Synthesis and Grasping Performance Analysis of Multi-Loop Coupling Capture Mechanism for Launch and Recovery of Torpedo-Shaped Autonomous Underwater Vehicle

Research of capture mechanisms with strong capture adaptability and stable grasp is important to solve the problem of launch and recovery of torpedo-shaped autonomous underwater vehicles(AUVs).A multi-loop coupling capture mechanism with strong adaptability and high retraction rate has been proposed for the launch and recovery of torpedo-shaped AUVs with different morphological features.Firstly,the principle of capturing motion retraction is described based on the appearance characteristics of torpedo-shaped AUVs,and the configuration synthesis of the capture mechanism is carried out using the method of constrained chain synthesis.Secondly,the screw theory is employed to analyze the degree of freedom(DoF)of the capture mechanism.Then,the 3D model of the capture mechanism is established,and the kinematics and dynamics simulations are carried out.Combined with the capture orientation requirements of the capture mechanism,the statics and vibration characteristics analyses are carried out.Furthermore,considering the capture process and the underwater working environment,the motion characteristics and hydraulics characteristics of the capture mechanism are analyzed.Finally,a principle prototype is developed and the torpedo-shaped AUVs capture experiment is completed.The work provides technical reserves for the research and development of AUV capture special equipment.

A new method for evaluating the firing precision of multiple launch rocket system based on Bayesian theory

How to effectively evaluate the firing precision of weapon equipment at low cost is one of the core contents of improving the test level of weapon system.A new method to evaluate the firing precision of the MLRS considering the credibility of simulation system based on Bayesian theory is proposed in this paper.First of all,a comprehensive index system for the credibility of the simulation system of the firing precision of the MLRS is constructed combined with the group analytic hierarchy process.A modified method for determining the comprehensive weight of the index is established to improve the rationality of the index weight coefficients.The Bayesian posterior estimation formula of firing precision considering prior information is derived in the form of mixed prior distribution,and the rationality of prior information used in estimation model is discussed quantitatively.With the simulation tests,the different evaluation methods are compared to validate the effectiveness of the proposed method.Finally,the experimental results show that the effectiveness of estimation method for firing precision is improved by more than 25%.

The Launch of IEA Report World Energy Investment 2024 Successfully Held

On July 18,2024,the Launch of IEA Report World Energy Investment Report 2024 was released at Peking University.This conference was co-hosted by the International Energy Agency(IEA)and the Institute of Energy,Peking University.

Commercial Aerospace: The Next Launchpad For the Chinese Economy

On December 29,2023,the first launch service tower was completed at the Hainan International Commercial Aerospace Launch Center,marking a key step forward in building the launch capacity of China’s first commercial aerospace launch site.On December 10,a Hyperbola-2 methane-liquid oxygen reusable verification rocket was launched successfully,marking the first recovery of reusable carrier rockets in China.

Introduction and Prospects of Gravity-1 Launch Vehicle’s Sea-Based Three Verticals Testing and Launch Mode

Gravity-1 was the world's first carrier rocket to adopt the sea-based “three vertical” testing launch mode. This article introduces the overall layout of the launch site and the workflow of rocket testing and launch for its maiden flight mission. The process of vertical assembly, vertical testing, vertical transportation, and sea-based hot launches are explained. Additionally, it provides an outlook on the improved “three vertical” testing and launch mode for future missions, such as land-based launches, rapid launches, and remote sea launches.

Analysis of the Gravity-1 Sea Launch System and Technical Features

Sea launch has the characteristics of flexible launching points, high landing area safety, and good economy. In recent years, it has become one of the important launch methods. Since 2019, China has carried out a total of 11 successful sea launches. The Gravity-1(YL-1) sea launch system consists of a launch vehicle system and a sea launch platform. The sea launch program includes roll on/roll off boarding, sea mooring, sea maneuvering, anchoring and positioning, system testing, and formal launch. Through the maiden flight of YL-1, the design and manufacturing technology of large tonnage dedicated launch ship, launch vehicle vertical transfer and roll on/roll off boarding technology, anti-shake technology for sea launch, simple inflatable flexible insulation protective cover technology, and remote wireless measurement and control technology have been fully verified.

Supercritical carbon dioxide as a new working medium for pneumatic launch:A theoretical study

Compared with the conventionally gaseous or liquid working media,the specific internal energy of supercritical carbon dioxide(SCD)is higher at the same temperature and pressure,and the critical temperature of carbon dioxide is close to room temperature,making SCD a potential new working medium for pneumatic launch.To analyze the feasibility of this conception,an analytical model of a pneumatic catapult is established on basis of the conservations of mass and energy.The model consists of a high-pressure chamber and a low-pressure chamber connected by multiple valves,and there is a movable piston in the low-pressure chamber that can push an aircraft to accelerate.The effects of the launch readiness state of SCD in the high-pressure chamber,the initial volume of the low-pressure chamber and the valve control on the movement of the aircraft are analyzed.It is found that there is a restrictive relation between the temperature and pressure of the launch readiness state of SCD,i.e.,there is a maximum allowable launch readiness pressure when the launch readiness temperature is fixed.If this restrictive relation is not satisfied,the working medium in the low-pressure chamber will drop to its triple point within a few milliseconds,leading to a launch failure.Owing to this restrictive relation,there is an optimal launch readiness state of SCD with the highest working capacity for any allowable launch readiness temperature.The pressure of the low-pressure chamber will decrease significantly as the initial volume increases,leading to a decreased acceleration of the aircraft.The acceleration can be controlled below a critical value by a designed sequential blasting technique of multiple valves.The calculated results show that a 500 kg aircraft can be accelerated from 0 to 58 m/s in 0.9 s with 36 kg of carbon dioxide.This research provides a new technique for the controllable cold launch of an aircraft.

LM-11SL：A Sea-Launched Carrier Rocket for Small Satellites and Its Launch Service

Following the successful maiden flight of the Long March 11(LM-11) launch vehicle from the Jiuquan Satellite Launch Center in September 2015, the first sea-launched carrier rocket dedicated to provide a launch service for small satellites and their constellations, the Long March 11 Sea Launch(LM-11 SL) has been under development by the China Academy of Launch Vehicle Technology(CALT) and the China Great Wall Industry Corporation(CGWIC). It is planned to commence launch service in 2018. Based on the LM-11, a land-launched four-staged solid launch vehicle which has entered the market and accomplished launch missions for several small satellites in the past 3 years, the newly adopted sea launch technology enables transport and launch of LM-11 SL from maritime ships, providing flexible launch location selection.After inheriting the mature launch vehicle technologies from previous members of the Long March launch vehicle family and adopting a new way of launching from the sea, the LM-11 SL is capable of sending payloads into low Earth orbits with all altitudes and inclinations, from 200 km to 1000 km, from equatorial to sun synchronous, within a shortduration launch campaign. The LM-11 SL provides a flexible, reliable and economical launch service for the global small satellite industry.

Innovation and Outlook of the New Generation of Cryogenic and Quick-Launch Launch Vehicle

This paper introduces a launch vehicle scheme for the new generation of cryogenic and quick-launch launch vehicle(LM-6). The main technical innovations of LM-6 launch vehicle include the capability of twenty satellites launched by one vehicle, high-pressure staged combustion cycle engine and oxygen tank self-pressurization, sandwich bulkhead tank with 200 K temperature difference, and 7-day quick-launch using the "three horizontals" test and launch mode with integral transportation and erection. The future development of the quick-launch launch vehicle is predicted based upon the need for vehicle mission coverage improvement, better response speed, and stronger market competiveness.

Research on agile space emergency launching mission planning simulation and verification method

Space emergency launching is to send a satellite into space by using a rapid responsive solid rocket in the bounded time to implement the emergency Earth observation mission.The key and difficult points mainly include the business process construction of launching mission planning,validation of the effectiveness of the launching scheme,etc.This paper pro-poses the agile space emergency launching mission planning simulation and verification method,which systematically con-structs the overall technical framework of space emergency launching mission planning with multi-field area,multi-platform and multi-task parallel under the constraint of resource schedul-ing for the first time.It supports flexible reconstruction of mis-sion planning processes such as launching target planning,tra-jectory planning,path planning,action planning and launching time analysis,and can realize on-demand assembly of operation links under different mission scenarios and different plan condi-tions,so as to quickly modify and generate launching schemes.It supports the fast solution of rocket trajectory data and the accurate analysis of multi-point salvo time window recheck and can realize the fast conflict resolution of launching missions in the dimensions of launching position and launching window sequence.It supports lightweight scenario design,modular flexi-ble simulation,based on launching style,launching platform,launching rules,etc.,can realize the independent mapping of mission planning results to two-dimensional and three-dimen-sional visual simulation models,so as to achieve a smooth con-nection between mission planning and simulation.

Multi-agent Based Hierarchy Simulation Models of Carrier-based Aircraft Catapult Launch

With the aid of multi-agent based modeling approach to complex systems, the hierarchy simulation models of carrier-based aircraft catapult launch are developed. Ocean, carrier, aircraft, and atmosphere are treated as aggregation agents, the detailed components like catapult, landing gears, and disturbances are considered as meta-agents, which belong to their aggregation agent. Thus, the model with two layers is formed i.e. the aggregation agent layer and the meta-agent layer. The information communication among all agents is described. The meta-agents within one aggregation agent communicate with each other directly by information sharing, but the meta-agents, which belong to different aggregation agents exchange their information through the aggregation layer first, and then perceive it from the sharing environment, that is the aggregation agent. Thus, not only the hierarchy model is built, but also the environment perceived by each agent is specified. Meanwhile, the problem of balancing the independency of agent and the resource consumption brought by real-time communication within multi-agent system （MAS） is resolved. Each agent involved in carrier-based aircraft catapult launch is depicted, with considering the interaction within disturbed atmospheric environment and multiple motion bodies including carrier, aircraft, and landing gears. The models of reactive agents among them are derived based on tensors, and the perceived messages and inner frameworks of each agent are characterized. Finally, some results of a simulation instance are given. The simulation and modeling of dynamic system based on multi-agent system is of benefit to express physical concepts and logical hierarchy clearly and precisely. The system model can easily draw in kinds of other agents to achieve a precise simulation of more complex system. This modeling technique makes the complex integral dynamic equations of multibodies decompose into parallel operations of single agent, and it is convenient to expand, maintain, and reuse the program codes.

Robust Attitude Control for Reusable Launch Vehicles Based on Fractional Calculus and Pigeon-inspired Optimization

In this paper, a robust attitude control system based on fractional order sliding mode control and dynamic inversion approach is presented for the reusable launch vehicle RLV during the reentry phase. By introducing the fractional order sliding surface to replace the integer order one, we design robust outer loop controller to compensate the error introduced by inner loop controller designed by dynamic inversion approach. To take the uncertainties of aerodynamic parameters into account, stochastic robustness design approach based on the Monte Carlo simulation and Pigeon-inspired optimization is established to increase the robustness of the controller. Some simulation results are given out which indicate the reliability and effectiveness of the attitude control system. © 2014 Chinese Association of Automation.

An efficient and modular modeling for launch dynamics of tubed rockets on a moving launcher

This paper develops a modular modeling and efficient formulation of launch dynamics with marching fire(LDMF)using a mixed formulation of the transfer matrix method for multibody systems(MSTMM)and Newton-Euler formulation.Taking a ground-borne multiple launch rocket systems(MLRS),the focus is on the launching subsystem comprising the rocket,flexible tube,and tube tail.The launching subsystem is treated as a coupled rigid-flexible multibody system,where the rocket and tube tail are treated as rigid bodies while the flexible tube as a beam with large motion.Firstly,the tube and tube tail can be elegantly handled by the MSTMM,a computationally efficient order-N formulation.Then,the equation of motion of the in-bore rocket with relative kinematics w.r.t.the tube using the Newton-Euler method is derived.Finally,the rocket,tube,and tube tail dynamics are coupled,yielding the equation of motion of the launching subsystem that can be regarded as a building block and further integrated with other subsystems.The deduced dynamics equation of the launching subsystem is not limited to ground-borne MLRS but also fits for tanks,self-propelled artilleries,and other air-borne and naval-borne weapons undergoing large motion.Numerical simulation results of LDMF are given and partially verified by the experiment.

A novel launch dynamics measurement system for multiple launch rocket system and comparative analysis with numerical simulations

In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket’s departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.

A novel non-separation opening scheme of front cover for rocket launch canister

In view of that existing opening technologies of front cover for rocket launch canister have disadvantages such as causing damage on the ground equipment,not being reused and easily broken.A novel reusable non-separation spring-driven opening scheme is proposed to achieve rapid and reliable opening of the front cover.The mathematical model of the opening process of the front cover is established by the rigid body dynamics theory.To establish a response surface model to optimize the opening scheme,three main influencing factors of the opening process are obtained through the designed experiments,including the pre-compression,the stiffness of the thrust spring,and the thrust spring force arm length.In addition,the prescribed kinematic law was taken as constraint,and the smaller thrust spring preliminary pressure and angular velocity was taken as optimization expectations.The results show that the opening scheme meets the design requirements on opening process well.It also shows that the optimized scheme can reduce the kinetic energy of the front cover,and the impact on the canister effectively,achieving a reliable and rapid opening of the front cover.