Fuzzy sliding mode control guidance law with terminal impact angle and acceleration constraints

In this paper, a novel fuzzy sliding mode control（FSMC） guidance law with terminal constraints of miss distance, impact angle and acceleration is presented for a constant speed missile against the stationary or slowly moving target. The proposed guidance law combines the sliding mode control algorithm with a fuzzy logic control scheme for the lag-free system and the first-order lag system. Through using Lyapunov stability theory, we prove the sliding surface converges to zero in finite time. Furthermore, considering the uncertain information and system disturbances, the guidance gains are on-line optimized by fuzzy logic technique. Numerical simulations are performed to demonstrate the performance of the FSMC guidance law and the results illustrate the validity and effectiveness of the proposed guidance law.

Overburden fracture evolution laws and water-controlling technologies in mining very thick coal seam under water-rich roof

Considering the danger of water inrush in mining very thick coal seam under water-rich roof in Majialiang Coal Mine,the universal discrete element(UDEC)software was used to simulate the overburden fracture evolution laws when mining 4#coal seam.Besides,this study researched on the influence of face advancing length,speed and mining height on the height of the water flowing fractured zones(HWFFZ),and analyzed the correlation of face advancing length and change rules of aquifer water levels and goaf water inflow.Based on those mentioned above,this research proposed the following water-controlling technologies:draining the roof water before mining,draining goaf water,reasonable advancing speed and mining thickness.These water-controlling technologies were successfully used in the feld,thus ensured safely mining the very thick coal seam under water-rich roof.

Approximation law for discrete-time variable structure control systems

Two approximation laws of sliding mode for discrete-time variable structure control systems are proposed to overcome the limitations of the exponential approximation law and the variable rate approximation law. By applying the proposed approximation laws of sliding mode to discrete-time variable structure control systems, the stability of origin can be guaranteed, and the chattering along the switching surface caused by discrete-time variable structure control can be restrained effectively. In designing of approximation laws, the problem that the system control input is restricted is also considered, which is very important in practical systems. Finally a simulation example shows the effectiveness of the two approximation laws proposed.

Practical Survey on Design and Testing of Flight Control Laws for Helicopter Engineering Simulators

A practical survey on engineering implementation of flight control laws on helicopter engineering simulators is proposed.Advances of helicopter engineering simulators are introduced.Practical flight control technologies are reviewed,with an emphasis on discussing the corresponding engineering simulation programs.Finally,the difficulties of implementing advanced control technologies are addressed,and the future development of helicopter engineering simulators are highlighted.

Remote Control Guidance Law Design Using Variable Structure Control

A method of sliding mode variable structure control for the missile body being a time varying system is presented. A remote control guidance law is designed. The method has strong robustness to target＇ s maneuver. To reduce the chattering phenomena, quasi-sliding mode variable structure control method is used. Simulation results show that the proposed method has small miss distance for any kind of maneuvering targets and requires small control energy.

Dynamical Correction of Control Laws for Marine Ships’ Accurate Steering

这个工作的目的是为海洋的车辆自动驾驶仪设计的分析合成问题。尽管有为一个解决方案的众多的已知的方法，提及的问题由于某些动态条件，要求和限制的一张广泛的人口的存在是很复杂的，它必须被一条驾驶控制法律的适当选择满足。这份报纸的目的是简化合成的过程，提供精确的与控制系统的理想的动力学驾驶。这里建议的途径基于允许去耦的特殊统一多种用途的控制法律结构的用法合成进更简单的特别优化问题。特别地，这结构包括一个动态修正者在海波浪骚乱的行动下面为车辆鈥檚 运动支持理想的特征。作为结果，为修正者设计的一个专业化新方法被建议提供精确驾驶或在轮船的精确驾驶并且节俭的驾驶之间的一宗交易。这个方法担保关于航行的实际环境的控制法律的某个灵活性；它的相应拐弯处能在实时被认识到在上。

Division of Gas Accumulation System and Laws Controlling Distribution of Natural Gas in Typical Petroliferous Basins of China

Considering the existing problems of the petroleum system, this paper brings forward the concept of natural gas accumulation system and presents the dividing principles. Then detailed statistics on the accumulation factors of the 32 typical natural gas accumulation systems in China and studies on the laws controlling distribution of gas are collected. The research shows that the petroleum accumulation system is the basic unit controlling petroleum generation, migration and accumulation. Generating intensity, generating amount, accumulating efficiency and migration distance plays an important role in the distribution of natural gas. Through analysis on results of resources evaluation, discovered reserves and residual reserves, potential areas in middle-scaled petroliferous basins in China are forecasted in this paper. Ordos, Sichuan, Tarim and Qaidam basins are found out to be the main basins developing and enriching gas accumulation systems.

Improving the Control Energy in Model Reference Adaptive Controllers Using Fractional Adaptive Laws

This paper presents the analysis of the control energy consumed in model reference adaptive control(MRAC)schemes using fractional adaptive laws, through simulation studies. The analysis is focused on the energy spent in the control signal represented by means of the integral of the squared control input(ISI). Also, the behavior of the integral of the squared control error(ISE) is included in the analysis.The orders of the adaptive laws were selected by particle swarm optimization(PSO), using an objective function including the ISI and the ISE, with different weighting factors. The results show that, when ISI index is taken into account in the optimization process to determine the orders of adaptive laws,the resulting values are fractional, indicating that control energy of the scheme might be better managed if fractional adaptive laws are used.

Error analysis and a new steering law design for spacecraft control system using SGCMGs

Based on the singular value decomposition theory,this paper analyzed the mechanism of escaping/avoiding singularity using generalized and weighted singularity-robust steering laws for a spacecraft that uses single gimbal control moment gyros （SGCMGs） as the actuator for the attitude control system.The expression of output-torque error is given at the point of singularity,proving the incompatible relationship between the gimbal rate and the output-torque error.The method of establishing a balance between the gimbal rate and the output-torque error is discussed,and a new steering law is designed.Simulation results show that the proposed steering law can effectively drive SGCMGs to escape away from singularities.

A novel reaching law approach of quasi-sliding-mode control for uncertain discrete-time systems

A novel discrete-time reaching law was proposed for uncertain discrete-time system,which contained process noise and measurement noise.The proposed method reserves all the advantages of discrete-time reaching law,which not only decreases the band width of sliding mode and strengthens the system robustness,but also improves the dynamic performance and stability capability of the system.Moreover,a discrete-time sliding mode control strategy based on Kalman filter method was designed,and Kalman filter was employed to eliminate the influence of system noise.Simulation results show that there is no chattering phenomenon in the output of controller and the state variables of controlled system,and the proposed algorithm is also feasible and has strong robustness to external disturbances.

Impact angle control over composite guidance law based on feedback linearization and finite time control

The impact angle control over guidance(IACG) law against stationary targets is proposed by using feedback linearization control(FLC) and finite time control(FTC). First, this paper transforms the kinematics equation of guidance systems into the feedbackable linearization model, in which the guidance law is obtained without considering the impact angle via FLC. For the purpose of the line of sight(LOS) angle and its rate converging to the desired values, the second-order LOS angle is considered as a double-integral system. Then, this paper utilizes FTC to design a controller which can guarantee the states of the double-integral system converging to the desired values. Numerical simulation illustrates the performance of the IACG, in contrast to the existing guidance law.

四川盆地南部地区五峰组—龙马溪组深层页岩气富集控制因素新认识

近年来,随着四川盆地五峰组—龙马溪组页岩气勘探开发迈向深层(埋深介于3500~4500 m),在四川盆地南部(下文简称川南)地区的泸州、长宁和渝西等区块深层页岩气不断取得了重要突破,展现了深层页岩气良好的开发前景。为了准确认识川南地区深层页岩在局部地区出现的低电阻率、高含水饱和度、测试微气现象,分别从页岩有机质成熟演化、页岩气源内运移特征和区域多期断裂活动影响等3个方面系统地分析了页岩气富集控制因素。研究结果表明:①高—过成熟度有机质石墨化造成了页岩电阻率和含气量明显降低,在有机质成熟度(Ro)大于3.6%以后,有机质生气能力衰竭,颗粒孔隙度明显降低,含水饱和度明显升高;②页岩气存在“源内侧向运移”特征,含气性与现今构造区带构造位置相对高低相关,表现为相对海拔高部位含气饱和度高,相对海拔低部位含气饱和度低;③Ⅰ级断裂对天然气的散失有显著的控制作用,建议距离Ⅰ级断裂1.5 km范围内勿部署实施井位,Ⅱ级断裂对含气性影响范围有限,距离Ⅱ级断层700 m以外时对页岩气体积压裂的影响较小。结论认为,充分考虑页岩有机质热演化程度、构造位置相对高低关系以及断裂发育特征等因素对深层页岩气富集的影响,有利于完善深层页岩气评价标准,对认识深层页岩气资源潜力以及优选有利区,具有重要现实意义,并可为推动实现深层页岩气规模增储和效益开发提供理论支撑。

软土地层三线小角度叠交盾构隧道施工影响规律及位移控制

天津地铁6号线入出段线盾构隧道上穿既有隧道,通过现场实测和数值模拟对既有隧道结构变形规律、变形影响因素、不同变形控制措施的效果进行了研究。结果表明:盾构上穿过程中既有隧道竖向位移整体呈现出隆起-沉降-隆起的变化规律;刀盘距叠交部位断面距离L=2.0D(D为隧道直径)时,叠交部位断面轴力达到最大值,L=0~2.0D时,叠交部位断面弯矩逐渐由L≤0时的横8字形转变为L≥2.0D时的三叶草形;新建隧道与既有隧道的叠交角度在15°~60°、竖向净距小于1.0D时,既有隧道竖向位移受新建隧道影响较大,实际工程中应使叠交角度大于60°,竖向净距大于1.0D;设置支撑台车后,支撑台车影响范围约为2倍台车长度,在影响范围内横断面位移得到控制,但随着支撑台车离开,原来位置处对位移的控制效果逐渐消失;与不注浆相比,深孔注浆加固后既有隧道竖向位移最大值和水平位移最大值分别减小了67.4%、76.0%。

基于新型趋近律的PMSM模糊滑模控制

针对永磁同步电机的调速系统动态品质易受参数变化、外部扰动以及摩擦力等不确定因素影响而导致伺服性能降低的问题,提出一种改进的幂次指数趋近律,对该趋近律的参数k和ε引入模糊规则控制,有效抑制传统滑模变结构控制中的固有抖振问题,提升收敛速度。为了消除系统内、外部扰动引起的控制精度问题,设计一种新型扰动观测器进行观测。仿真结果表明:该方法能够实现精确的速度控制;与传统的滑模控制相比,在保留其优势的基础上,有效降低了滑模的抖振。

一类不确定切换模糊系统的记忆保成本控制

针对一类具有状态时滞和不确定性的切换模糊系统,提出了该类系统的记忆保成本控制问题。利用引入系统过去的状态信息,构造有记忆状态反馈控制器,以消除系统时滞对于系统稳定性产生的不良影响。在保证成本函数指标小于某个上界及允许的不确定性条件下,结合多Lyapunov函数方法和线性矩阵不等式(linear matrix inequality,LMI)处理方法得到最终的充分条件,保证闭环系统能够渐近稳定;且得到满足设计的切换律的记忆状态反馈控制器增益。最后通过Simulink仿真验证了所提方法的正确性。

邻里噪声污染防治立法现状及江苏省立法建议

社会生活噪声污染来源多、成因复杂、影响范围广,对公众健康危害大。产生社会生活噪声污染纠纷时,其法律主体复杂,涉及部门多,受影响群众覆盖范围广,是社会各界较为关注的噪声类型之一。邻里噪声是社会生活噪声的重要组成部分。介绍了法国、德国、美国等国家邻里噪声的立法现状,我国国家层面有关邻里噪声的法律规定,以及地方邻里噪声的立法实践;系统分析了江苏省邻里噪声扰民的主要类型、特点和污染防治的现状;针对性地提出了邻里噪声污染防治的立法建议,可为江苏省噪声污染防治立法提供参考。

基于改进分数阶滑模控制的PMLSM直接推力控制

针对分数阶滑模控制在永磁直线同步电机(Permanent Magnet Linear Synchronous Motor, PMLSM)直接推力控制下转速环精度不高、磁链和推力波动大等问题,提出一种改进的分数阶滑模控制算法,即分数阶双幂次指数趋近律、分数阶变速趋近律相结合的组合趋近律,能有效减弱滑模控制引起的系统振荡,加快趋近速率。仿真结果表明:与分数阶滑模控制相比,在PMLSM直接推力控制系统中采取改进分数阶滑模控制,磁链和推力波动明显减弱,系统响应速度加快,提高了PMLSM推力响应的抗干扰能力。

码垛机器人的幂次指数趋近律变结构控制

为提高码垛机器人的控制精度,并保证系统在存在建模误差及扰动时的鲁棒性,设计了一种基于幂次指数趋近律的变结构控制算法。建立了二连杆机械臂数学模型,分析了三种趋近律的缺点,比较并提出了幂次指数趋近律。提出了使用求解微分方程的办法分三个阶段来研究算法的鲁棒性。分析了有界综合扰动极限值与控制器参数之间的关系。使用新算法得出了机器人在不含扰动时的仿真结果,解出了变结构控制三个阶段的微分方程,得出了机械臂在存有建模误差及扰动时的仿真结果。幂次指数趋近律变结构控制算法提高了码垛机器人的控制精度,在系统存在各种误差及扰动条件下具有极强鲁棒性并依然可以保证很高的控制精度。

Sliding mode control and Lyapunov based guidance law with impact time constraints

This paper analyses the issue of impact time control of super-cavitation weapons impact fixed targets which mainly refer to the ships or submarines who lost power, but still have combat capability. Control over impact time constraints of guidance law(ITCG) is derived by using sliding mode control(SMC) and Lyapunov stability theorem. The expected impact time is realized by using the notion of attack process and estimated time-to-go to design sliding mode surface(SMS). ITCG contains equivalent and discontinuous guidance laws, once state variables arrive at SMS,the equivalent guidance law keeps the state variables on SMS,then the discontinuous guidance law enforces state variables to move and reach SMS. The singularity problem of ITCG is also analyzed. Theoretical analysis and numerical simulation results are given to test the effectiveness of ITCG designed in this paper.