Lower Bounds of Decay Rates for Solution to the Single-Layer Quasi-Geostrophic Model

In this paper, we study the long-time behavior of solutions of the single-layer quasi-geostrophic model arising from geophysical fluid dynamics. We obtain the lower bound of the decay estimate of the solution. Utilizing the Fourier splitting method, under suitable assumptions on the initial data, for any multi-index α, we show that the solution Ψ satisfies .

2-D Modeling and Calculations of Stratospheric Ozone and Influences of Convection, Diffusion, and Time

An engineering system approach of 2-D cylindrical model of transient mass balance calculations of ozone and other concerned chemicals along with fourteen photolysis, ozone-generating and ozone-depleting chemical reaction equations was developed, validated, and used for studying the ozone concentrations, distribution and peak of the layer, ozone depletion and total ozone abundance in the stratosphere. The calculated ozone concentrations and profile at both the Equator and a 60˚N location were found to follow closely with the measured data. The calculated average ozone concentration was within 1% of the measured average, and the deviation of ozone profiles was within 14%. The monthly evolution of stratospheric ozone concentrations and distribution above the Equator was studied with results discussed in details. The influences of slow air movement in both altitudinal and radial directions on ozone concentrations and profile in the stratosphere were explored and discussed. Parametric studies of the influences of gas diffusivities of ozone DO3 and active atomic oxygen DO on ozone concentrations and distributions were also studied and delineated. Having both influences through physical diffusion and chemical reactions, the diffusivity (and diffusion) of atomic oxygen DO was found to be more sensitive and important than that of ozone DO3 on ozone concentrations and distribution. The 2-D ozone model present in this paper for stratospheric ozone and its layer and depletion is shown to be robust, convenient, efficient, and executable for analyzing the complex ozone phenomena in the stratosphere. .

LayeredModel:一个面向室内空间的移动对象数据模型

基于室内空间的移动对象管理或称室内移动对象管理,是一个崭新而又富有挑战的研究领域.如何建立语义完备并且支持多种应用的室内移动对象模型是一个重要的基础性问题.提出了一个分层的室内移动对象数据模型:LayeredModel.该模型提出了室内空间距离的概念,并使用不同的层次关系表达室内元素、传感器以及移动对象之间的关系.从而能支持多种基于室内空间的应用,例如移动对象的跟踪、监控、导航以及室内最近邻查询等.LayeredModel模型也为后续的室内移动对象的索引、查询的研究奠定了基础.

Determination of Natural Logarithm of Diffusion Coefficient and Activation Energy of Thin Layer Drying Process of Ginger Rhizome Slices

This study is an extension of the previous work done with ARS-680 Environmental Chamber. Drying is a complex operation that demands much energy and time. Drying is essentially important for preservation of ginger rhizome. Drying of ginger was modeled, and then the effective diffusion coefficient and activation energy were determined. For this purpose, the experiments were done at six levels of varied temperatures: 10°C, 20°C, 30°C, 40°C, 50°C and 60°C. The values of effective diffusion coefficients obtained in this work for the variously treated ginger rhizomes closely agreed with the average effective diffusion coefficients of other notable authors who determined the drying kinetics and convective heat transfer coefficients of ginger slices.

A three-layer structure model for the effect of a soft middle layer on Love waves propagating in layered piezoelectric systems

A three-layer structure model is proposed for investigating the effect of a soft elastic middle layer on the propagation behavior of Love waves in piezoelectric layered systems, with ＂soft＂ implying that the bulk-shear-wave velocity of the middle layer is smaller than that of the upper sensitive layer. Dispersion equations are obtained for unelectroded and traction-free upper surfaces which, in the limit, can be reduced to those for classical Love waves. Systematic parametric studies are subsequently carried out to quantify the effects of the soft middle layer upon Love wave propagation, including its thickness, mass density, dielectric constant and elastic coefficient. It is demonstrated that whilst the thickness and elastic coefficient of the middle layer affect significantly Love wave propagation, its mass density and dielectric constant have negligible influence. On condition that both the thickness and elastic coefficient of the middle layer are vanishingly small so that it degenerates into an imperfectly bonded interface, the three-layer model is also employed to investigate the influence of imperfect interfaces on Love waves propagating in piezoelectric layer/elastic sub- strate systems. Upon comparing with the predictions ob- tained by employing the traditional shear-lag model, the present three-layer structure model is found to be more ac- curate as it avoids the unrealistic displacement discontinuity across imperfectly bonded interfaces assumed by the shearlag model, especially for long waves when the piezoelectric layer is relatively thin.

A 31-year Global Diurnal Sea Surface Temperature Dataset Created by an Ocean Mixed-Layer Model

A dataset of hourly sea surface temperature(SST) from the period 1 January 1982 to 31 December 2012, and covering the global ocean at a resolution of 0.3°× 0.3°, was created using a validated ocean mixed-layer model(MLSST). The model inputs were heat flux and surface wind speed obtained from the Coupled Forecast System Reanalysis dataset. Comparisons with in-situ data from the Tropical Atmosphere Ocean array and the National Data Buoy Center showed that the MLSST fitted very well with observations, with a mean bias of 0.07℃, and a root-mean-square error(RMSE) and correlation coefficient of 0.37℃ and 0.98, respectively. Also, the MLSST fields successfully reproduced the diurnal cycle of SST in the in-situ data, with a mean bias of -0.005℃ and RMSE of 0.26℃. The 31-year climatology revealed that the diurnal range was small across most regions, with higher values in the eastern and western equatorial Pacific, northern Indian Ocean, western Central America, northwestern Australia, and several coastal regions. Significant seasonal variation of diurnal SST existed in all basins. In the Atlantic and Pacific basins, this seasonal pattern was oriented north–south, following the variation in solar insolation, whereas in the Indian basin it was dominated by monsoonal variability. At the interannual scale, the results highlighted the relationship between diurnal and interannual variations of SST, and revealed that the diurnal warming in the central equatorial Pacific could be a potential climatic indicator for ENSO prediction.

A Simplified Scheme of the Generalized Layered Radiative Transfer Model

In this paper, firstly, a simplified version （SGRTM） of the generalized layered radiative transfer model （GRTM） within the canopy, developed by us, is presented. It reduces the information requirement of inputted sky diffuse radiation, as well as of canopy morphology, and in turn saves computer resources. Results from the SGRTM agree perfectly with those of the GRTM. Secondly, by applying the linear superposition principle of the optics and by using the basic solutions of the GRTM for radiative transfer within the canopy under the condition of assumed zero soil reflectance, two sets of explicit analytical solutions of radiative transfer within the canopy with any soil reflectance magnitude are derived： one for incident diffuse, and the other for direct beam radiation. The explicit analytical solutions need two sets of basic solutions of canopy reflectance and transmittance under zero soil reflectance, run by the model for both diffuse and direct beam radiation. One set of basic solutions is the canopy reflectance αf （written as α1 for direct beam radiation） and transmittance βf （written as β1 for direction beam radiation） with zero soil reflectance for the downward radiation from above the canopy （i.e. sky）, and the other set is the canopy reflectance （αb） and transmittance βb for the upward radiation from below the canopy （i.e., ground）. Under the condition of the same plant architecture in the vertical layers, and the same leaf adaxial and abaxial optical properties in the canopies for the uniform diffuse radiation, the explicit solutions need only one set of basic solutions, because under this condition the two basic solutions are equal, i.e., αf = αb and βf = βb. Using the explicit analytical solutions, the fractions of any kind of incident solar radiation reflected from （defined as surface albedo, or canopy reflectance）, transmitted through （defined as canopy transmittance）, and absorbed by （defined as canopy absorptance） the canopy and other properties pertinent to the radiative transfer within the canopy can be estimated easily on the ground surface below the canopy （soil or snow surface） with any reflectance magnitudes. The simplified transfer model is proven to have a similar accuracy compared to the detailed model, as well as very efficient computing.

ATMOSPHERIC BOUNDARY LAYER CONCEPT MODEL OF THE PEARL RIVER DELTA AND ITS APPLICATION

Based on the geographical circumstance, climate and the boundary layer meteorology features of the Pearl River Delta, a boundary layer concept model of the Pearl River Delta was built. The concept model consists of four fundamental factors that affect the boundary layer meteorology of the Pearl River Delta and can convincingly explain the reason of the air quality change in the Pearl River Delta. The model can be used to the diffusion capability analysis, the air pollution potential forecasting or haze forecasting, etc.

A Micro-layer Model for the Lubrication Effect Near Collisions of Immersed Particles

A micro-layer model is proposed to account for the lubrication effect of liquid layer near collisions of immersed particles at moderate particle Reynolds number.This new model is to allow determination of the pressure profile within the micro-layer including the fluid inertia and viscosity.Then a correction based on the micro-layer model is applied to unsteady 3-D direct simulation of a particle approaching another one.The simulation is based on a modified immersed boundary method with direct force scheme.The quantitative agreement between numerical and experimental results validates the model presented in the study.The simulation results show that the fluid is squeezed prior to contact.When a particle approaches a flat wall or another particle,the lubrication force,obtained by integrating the pressure profile over the particle surface,is increased and prevents the particle from approaching.The model predicts that the velocity of approaching particle starts to decrease when separation distance of particles is less than 0.1dp,where dp is the particle diameter.

Arnol＇d＇s Second Nonlinear Stability Theorem for General Multilayer Quasi－geostrophic Model

Arnol'd's second nonlinear stability criterion for motions governed by a general multilayer quasi-geostrophic model is established. The model allows arbitrary density jumps and layer thickness, and at the top and the bottom of the nuid, the boundary condition is either free or rigid. The criterion is obtained by the establishment of the upper bounds of disturbance energy and potential enstrophy in terms of the initial disturbance field.

ALGEBRAIC TURBUL ENCE MODEL WITH MEM ORY FOR COMPUTATION OF 3-D TURBULENT BOUNDARY LAYERS WITH VALIDATION

Additional equations were found based on experiments for an algebraic turbulence model to improve the prediction of the behavior of three dimensional turbulent boundary layers by taking account of the effects of pressure gradient and the historical variation of eddy viscosity, so the model is with memory. Numerical calculation by solving boundary layer equations was carried out for the five pressure driven three dimensional turbulent boundary layers developed on flat plates, swept wing, and prolate spheroid in symmetrical plane. Comparing the computational results with the experimental data, it is obvious that the prediction will be more accurate if the proposed closure equations are used, especially for the turbulent shear stresses.

Three-Dimensional Simulations of RESET Operation in Phase-Change Random Access Memory with Blade-Type Like Phase Change Layer by Finite Element Modeling

An optimized device structure for reducing the RESET current of phase-change random access memory （PCRAM） with blade-type like （BTL） phase change layer is proposed. The electrical thermal analysis of the BTL cell and the blade heater contactor structure by three-dimensional finite element modeling are compared with each other during RESET operation. The simulation results show that the programming region of the phase change layer in the BTL cell is much smaller, and thermal electrical distributions of the BTL cell are more concentrated on the TiN/GST interface. The results indicate that the BTL cell has the superiorities of increasing the heating efficiency, decreasing the power consumption and reducing the RESET current from 0.67mA to 0.32mA. Therefore, the BTL cell will be appropriate for high performance PCRAM device with lower power consumption and lower RESET current.

Multi-layer Tectonic Model for Intraplate Deformation and Plastic-Flow Network in the Asian Continental Lithosphere

In a large area of the east—central Asian continent there is a unified seismic network system composed of two families of large—seismic belts that intersect conjugately. Such a seismic network in the middle—upper crust is actually a response to the plastic flow network in the lower lithosphere including the lower crust and lithospheric mantle. The existence of the unified plastic flow system confirms that the driving force for intraplate tectonic deformation results mainly from the compression of the India plate, while the long-range transmission of the force is carried out chiefly by means of plastic flow. The plastic flow network has a control over the intraplate tectonic deformation.

Asymptotic solution of a weak nonlinear model for the mid-latitude stationary wind field of a two-layer barotropic ocean

A weak nonlinear model of a two-layer barotropic ocean with Rayleigh dissipation is built.The analytic asymptotic solution is derived in the mid-latitude stationary wind field,and the physical meaning of the corresponding problem is discussed.

Experimental Study of Air Layer Drag Reduction with Bottom Cavity for A Bulk Carrier Ship Model

Air lubrication by means of a bottom cavity is a promising method for ship drag reduction. The characteristics of the bottom cavity are sensitive to the flow field around the ship hull and the effect of drag reduction, especially the depth of the bottom cavity. In this study, a ship model experiment of a bulk carrier is conducted in a towing tank using the method of air layer drag reduction (ALDR) with different bottom cavity depths. The shape of the air layer is observed, and the changes in resistance are measured. The model experiments produce results of approximately 20% for the total drag reduction at the ship design speed for a 25-mm cavity continuously supplied with air at Cq = 0.224 in calm water, and the air layer covers the whole cavity when the air flow rate is suitable. In a regular head wave, the air layer is easily broken and reduces the drag reduction rate in short waves, particularly when λ/Lw1 is close to one;however, it still has a good drag reduction effect in the long waves.

Turbulence Model Investigations on the Boundary Layer Flow with Adverse Pressure Gradients

在这份报纸，在骚乱边界层与的流动的数字研究不利并且压力坡度(APG ) 被使用平均 Reynolds 的海军司烧(RANS ) 进行方程。这研究选六为典型骚乱模型，它对计算精确，并且到评估 APG 的问题批评。本地摩擦抵抗系数在数字、试验性的结果之间被比较。无尺寸的平均速度侧面的一样的比较也被执行。威尔科克斯(2006 ) k-w 产生的结果离试验性的数据很靠近，这被发现。同时，象狂暴的动能和 Reynolds 压力那样的狂暴的数量也被学习。

Critical properties of XY model dimensional layered magnetic on two- films

Using Monte Carlo simulations, we have investigated the classical XY model on triangular lattices of ultra-thin film structures with middle ferromagnetic layers sandwiched between two antiferromagnetic layers. The internal energy, the specifc heat, the chirality and the chiral susceptibility are calculated in order to clarify phase transitions and critical phenomena. Prom the finite-size scaling analyses, the values of critical exponents are determined. In a range of interaction parameters, we find that the chirality steeply goes up as temperature increases in a temperature range; correspondingly the value of a critical exponent for this change is estimated.

A rapid and accurate two-point ray tracing method in horizontally layered velocity model

A rapid and accurate method for two-point ray tracing in horizontally layered velocity model is presented in this paper. Numerical experiments show that this method provides stable and rapid convergence with high accuracies, regardless of various 1-D velocity structures, takeoff angles and epicentral distances. This two-point ray tracing method is compared with the pseudobending technique and the method advanced by Kim and Baag (2002). It turns out that the method in this paper is much more efficient and accurate than the pseudobending technique, but is only applicable to 1-D velocity model. Kim's method is equivalent to ours for cases without large takeoff angles, but it fails to work when the takeoff angle is close to 90°. On the other hand, the method presented in this paper is applicable to cases with any takeoff angles with rapid and accurate convergence. Therefore, this method is a good choice for two-point ray tracing problems in horizontally layered velocity model and is efficient enough to be applied to a wide range of seismic problems.

The three-layer model of the thermohaline structure in the shallow seas

A three-layer model of the thermohaline structure is developed on the basis of the two -layer model of thermocline. The model is able to simulate the depth,thickness and intensity of both thermocline and halocline, and the temperature and salinity of both upper layer and lower layer in the shallow seas.Camparison of simulation with data is favorable.Detailed analysis is made on a variety of factors affecting the intensity of the thermocline.

A New Ocean Mixed-Layer Model Coupled into WRF

A new mesoscale air-sea coupled model (WRF- OMLM-Noh) was constructed based on the Weather Research and Forecasting (WRF) model and an improved Mellor-Yamada ocean mixed-layer model from Noh and Kim (OMLM-Noh). Through off-line tests and a simulation of a real typhoon, the authors compared the performance of the WRF-OMLM-Noh with another existing ocean mixed-layer coupled model (WRF-OMLM-Pollard). In the off-line tests with Tropical Ocean Global Atmosphere Program's Coupled Ocean Atmosphere Response Experiment (TOGA-COARE) observational data, the results show that OMLM-Noh is better able to simulate sea surface temperature (SST) variational trends than OMLM -Pollard. Moreover, OMLM-Noh can sufficiently reproduce the diurnal cycle of SST. Regarding the typhoon case study, SST cooling due to wind-driven ocean mixing is underestimated in WRF-OMLM-Pollard, which artificially increases the intensity of the typhoon due to more simulated air-sea heat fluxes. Compared to the WRF- OMLM-Pollard, the performance of WRF-OMLM-Noh is superior in terms of both the spatial distribution and temporal variation of SST and air-sea heat fluxes.