Performance Analysis and Drying Kinetics of Maize in an AflaSTOP Dryer

The performance of an AflaSTOP dryer which utilises biomass energy for drying maize was investigated. The drying behaviour of maize grains in the dryer was also investigated using ten (10) thin-layer mathematical models. The models were compared based on coefficient of determination (R2) and Root Mean Square Error (RMSE) values between experimental and predicted moisture ratios. At an average drying air temperature of 50°C and drying air velocity of 2.5 m/s, maize at average moisture content (MC) of 17.5% (wb) was dried to an average MC of 11.5% (wb) in three (3) hours. The drying and thermal efficiency were calculated as 81.1% and 29.6% respectively. Overall, drying took place in the falling rate period. The Logistics model was best to describe the thin-layer drying kinetics of maize in the dryer with R2 value of 0.9902 and RMSE value of 0.04908.

Dried earth layers of artificial forestland in the Loess Plateau of Shaanxi Province

By determining the earth moisture content of artificial forestland between 0 and 6 m deep in the Loess Plateau of Shaanxi province, the vertical change of moisture content, distribution and formation causes of a dried earth layer are researched. The results show that the average moisture content is 9.3%-9.5% between 2 and 4 m under artificial forest of over 10 year＇s growth in Guanzhong Plain, and chronic weak dried earth layers are developed which show that the dried earth layers are distributed extensively on the Loess Plateau. The southern boundary of the dried earth layer has reached the northern foot of the Qinling Mountains. When precipitation reaches 600 mm, there are weak dried earth layers between 2 and 4 m under artificial forest of more than 10 years old. When the precipitation is between 400 and 500 mm, there are moderate dried earth layers. When precipitation is above 800 mm, there are no dried earth layers. There are no dried earth layers under meadow land, corn land and less than 5 years old of artificial forestland in central and southern parts of the Loess Plateau. The development of dried earth layers under cypress forest is weaker than broad-leaved forest. Under the same climatic conditions, the development of dried earth layers under the loess tableland is nearly at the same level as the 2nd and 3rd river terrace. Dried earth layers developed in membrane water zone, and the buried depth is small and motion velocity is slow in the Loess Plateau, which is the direct water factor of the formation of the dried earth layer, while differences of tree age and tree species are the plant factors that consumed much moisture. From the depth of the gravity water and the membrane water in Guanzhong Plain, it is clear that the formation cause of dried earth layers is mainly due to natural factors. The dried layers generally develop in middle-aged artificial forestland that consumed too much moisture, which is the general character of earth moisture in subhumid and semiarid zones. The appearance of dried layers doesn＇t show that the forest doesn＇t develop in this area; this is depended on their development intensity. Artificial forest of Chinese poplar, locust tree and Chinese scholartree consuming less water can be planted in the areas where dried earth layer developed weakly, but can not be planted in the areas where dried earth layer developed intensely.

Long Term Effects of Farming System on Soil Water Content and Dry Soil Layer in Deep Loess Profile of Loess Tableland in China

Soil water is strongly affected by land use/cover in the Loess Plateau in China. Water stored in thick loessal soils is one of the most important resources regulating vegetation growth. However, soil water in the deep loess proifle, which is critical for maintaining the function of the“soil water pool”is rarely studied because deep proifle soil samples are dififcult to collect. In this study, four experimental plots were established in 2005 to represent different farming systems on the Changwu Tableland：fallow land, fertilized cropland, unfertilized cropland, and continuous alfalfa. The soil water content in the 15-m-deep loess proifles was monitored continuously from 2007 to 2012 with the neutron probe technique. The results showed that temporal variations in soil water proifles differed among the four farming systems. Under fallow land, the soil water content increased gradually over time, ifrst in the surface layers and later in the deep soil layers. In contrast, the soil water content decreased gradually under continuous alfalfa. The distributions of soil water in deep soil layers under both fertilized and unfertilized cropland were relatively stable over time. Thus farming system signiifcantly affected soil water content. Seven years after the start of the experiment, the soil water contents in the 15-m-deep proifles averaged 23.4%under fallow land, 20.3%under fertilized cropland, 21.6%under unfertilized cropland, and 16.0%under continuous alfalfa. Compared to measurements at the start of the experiment, both fallow land and unfertilized cropland increased soil water storage in the 15-m loess proifles. In contrast, continuous alfalfa reduced soil water storage. Fertilized cropland has no signiifcant effect on soil water storage. These results suggest that deep soil water can be replenished under the fallow and unfertilized farming systems. Dry soil layers （i.e., those which have soil water content less than the stable ifeld water capacity） in the subsoil of the Changwu Tableland region can be classiifed as either temporary dry soil layers or persistent dry soil layers. Temporary dry soil layers, which typically form under annual crops, often disappear during wet years. Persistent dry soil layers generally develop under perennial vegetation. Even after removing the vegetation, persistent dry soil layers remain for several decades. This study provides information useful for the conservation and utilization of soil water resources in the Loess Tableland.

Development of a Single-Column Model in RegCM4 and Its Preliminary Application for Evaluating PBL Schemes in Simulating the Dry Convection Boundary Layer

A single-column model(SCM)is developed in the regional climate model RegCM4.The evolution of a dry convection boundary layer(DCBL)is used to evaluate this SCM.Moreover,four planetary boundary layer(PBL)schemes,namely the Holtslag-Boville scheme(HB),Yonsei University scheme(YSU),and two University of Washington schemes(UW01,Grenier-Bretherton-Mc Caa scheme and UW09,Bretherton-Park scheme),are compared by using the SCM approach.A large-eddy simulation(LES)of the DCBL is performed as a benchmark to examine how well a PBL parameterization scheme reproduces the LES results,and several diagnostic outputs are compared to evaluate the schemes.The results show that the SCM is properly constructed.In general,with the DCBL case,the YSU scheme performs best for reproducing the LES results,which include well-mixed features and vertical sensible heat fluxes;the simulated wind speed,turbulent kinetic energy,entrainment flux,and height of the entrainment zone are all underestimated in the UW09;the UW01 has all those biases of the UW09 but larger,and the simulated potential temperature is not well mixed;the HB is the least skillful scheme,by which the PBL height,entrainment flux,height of the entrainment zone,and the vertical gradients within the mixed layer are all overestimated,and a inversion layer near the top of the surface layer is wrongly simulated.Although more cases and further testing are required,these simulations show encouraging results towards the use of this SCM framework for evaluating the simulated physical processes by the RegCM4.

Numerical Study on Dry Deposition Processes in Canopy Layer

A coupling model between the canopy layer(CL) and atmospheric boundary layer (ABL) for the study of dry deposition velocity is developed. The model consists of six parts: chemical species conservation equation including absorptive factor; the species uptake action including detailed vertical variation of absorptive element in CL; momentum exchange in CL which is represented by a first-order closure momentum equation with an additional larger-scale diffusive term; momentum exchange in ABL which is described by a complete set of the ABL turbulent statistic parameters; absorptivity (or solubility or reflection) at the surface including effects of the physical and chemical characters of the species, land type, seasonal and diurnal variations of the meteorological variables; and deposition velocity derived by distributions of the species with height in CL. Variational rules of the concentration and deposition velocity with both height and time are simulated with the model for both corn and forest canopies. Results predicted with the bulk deposition velocity derived in the paper consist well with experimental data.

An analytical study on the Rayleigh wave generation in a stratified structure

In this paper,an analytical method is used to investigate the Rayleigh wave generation in a stratified structure and the wave generation in a dry sandy layer constrained between the couple stress and inhomogeneous orthotropic half-spaces.This study is devoted to analyzing the impact of various effective parameters associated with the media on the phase velocities of the wave.The displacement components for each medium are derived by implementing the separable variable method.The frequency equa-tion is secured by using the displacement components in the boundary conditions,imposed at the interfaces between the layer and half-spaces.Moreover,the secured equation is the relation between the phase velocity and the wave number.Numerical computations are performed,and graphical representations are demonstrated between the phase velocity and the wave number for both phase velocities with different values of the parameters.The comparison between the phase velocities is observed for the same value of each pa-rameter.