Correlation between plate age and layer separation of double seismic zones

Global seismicity catalogs are sufficient for characterizing double seismic zones （DSZs） in subducting slab and facilitate to estimate layer separation without inconsistent uncertainties as local catalogs. Previous studies have shown the correlation between DSZs layer separation and plate age while correlation for those younger than -60 Ma is suspicious. The lacking of DSZs with layer separation less than 10 km further makes it difficult to precisely estimate such correlation. Thus, we incorporate eight DSZs data determined through local seismicity into globally-determined dataset and reexamine such correlation. The best fitting results show that both a linear model and a square root of plate age can mathematically fit the layer separation well. However, it is difficult to distinguish these two models when plate age is greater than -20 Ma since their difference is less than 2 km. However, if extrapolation is possible, both models should provide physical information that DSZs will not form if there is no subducting lithosphere. As a result, the DSZs cannot be produced until the oceanic lithospheric age becomes greater than 0.9 Ma in the square root model while the linear model gives a misleading result. As such the square root model demonstrates the relationship physically better than the linear one, it still needs further test in the future with more available data, nevertheless, our study might also provide evidence for the suggestion that the plate age is a primary control factor of the DSZs geometry as well as the subducting process which disregards any local tectonic stresses.

The research progress and prospect for the technology of controlling surface subsidence by grouting separated layer in overburden at coal mines in China

The developed process and theoretical achievement for the technology of controlling surface subsidence by grouting separated layer in overburden is summarized in this paper. The research progress of the technology is discussed synthetically on the basis of practice and research results obtained at coal mine of China in recent years. According to the development tendency of mining under buildings, water bodies and railroads and the properties of the technology, the future research direction is proposed.

Energetic Laser-Ion Acceleration by Strong Charge-Separation Field

The laser-ion acceleration from the ultra-short and ultra-intense laser-matter interactions attracts more and more interest nowadays. When a laser pulse interacts with a target, relativistic electrons are generated in a period of few femtoseconds and driven away by the ponderomotive force, then a huge charge-separation field forms. In general cases, the ion acceleration is determined by this charge-separation field and the scale length of the plasma density. A general time-dependent solution is obtained to describe laser-plasma isothermal expansions into a vacuum, which is the fundamental theory of the laser-ion acceleration. It is adequate for non-quasi-neutral plasmas and different types of the scale length of the density gradient. The previous solutions are some special cases of our general solution. It is found that there exist both a compression layer of the ion velocity distribution and a potential well for sorue initial conditions. However, many unaccounted idiographic solutions, which may be used to reveal new mechanisms of ion acceleration, may be deduced from our general solutions.

Study on Internal Supersonic Flows with Pseudo-shock Wave Using Liquid Crystal Flow Visualization Method

The flow visualization technique using shear-sensitive liquid crystal is applied to the investigation of a Mach 2 internal supersonic flow with pseudo-shock wave （PSW） in a pressure-vacuum supersonic wind tunnel. It provides qualitative information mainly concerning the overall flow structure, such as the turbulent boundary layer separation, reattachment locations and the dimensionalities of the flow. Besides, it can also give understanding of the surface streamlines, vortices in separation region and the corner effect of duct flow. Two kinds of crystals with different viscosities are used in experiments to analyze the viscosity effect. Results are compared with schlieren picture, confirming the effectiveness of liquid crystal in flow-visualization.

A study on characteristics of shock train inside a shock tube

Shock tubes are devices which are used in the investigation of high speed and high temperature flow of compressible gas. lnside a shock tube, the interaction between the reflected shock wave and boundary layer leads to a complex flow phenomenon. Initially a normal shock wave is formed in the shock tube which migrates toward the closed end of the tube and that in turn leads to the reflection of shock. Due to the boundary layer interaction with the reflected shock, the bifurcation of shock wave takes place. The bifurcated shock wave then approaches the contact surface and shock train is generated. Till date only a few studies have been conducted to investigate this shock train phenomenon inside the shock tube. For the present study a computational fluid dynamics （CFD） analysis has been performed on a two dimensional axi-symmetric model of a shock tube using unsteady, compressible Navier-Stokes equations. In order to investigate the detailed characteristics of shock train, parametric studies have been performed by varying different parameters such as the shock tube length, diameter, pressure ratio used inside the shock tube.

Application of Dual-blade Stator to Low-speed Ratio Performance Improvement of Torque Converters

With application of the lock-up clutch in the torque converter（TC）, fuel economy is not much determined by its high-speed ratio transmission efficiency. As a benefit, more researches are focused on its low-speed ratio performance so as to improve vehicle gradeability and launching acceleration performance. According to the results of computational fluid dynamics（CFD） analysis, hydrodynamic loss inside the stator cascade accounts for 42% of the total energy loss at stalling speed ratio. It is found that upstream flow with large impingement angle results in boundary layer separation at the leading edge, which aggregates hydrodynamic loss and decreases circular flow rate dramatically at low-speed ratio. In this paper, a dual-blade stator is proposed to suppress the boundary layer separation, which is parameterized by using the non-uniform rational B spline（NURBS） method. The mean camber line and blade profile curve are expressed by a three control points quadratic open NURBS and a cubic closed one respectively. The key design parameters included the slot width and suction side shape of the primary blade are analyzed. The most effective slot width is found to be between 4% and 8% chord length, and the boundary layer separation can be suppressed completely by decreasing distribution of momentum moment at the primary blade and adding it to the leading edge of the secondary blade. As a result, circular flow rate and impeller torque capacity is increased by 17.9% and 9.6% respectively at stalling speed ratio, meanwhile, low-speed ratio efficiency is also improved. Maximum efficiency at high-speed ratio decreases by 0.5%, which can be ignored as the work of lock-up clutch. This research focuses on using the dual-blade stator to optimize low-speed ratio performance of the TC, which is benefit to vehicle power performance.

Research on Design Method of the Full Form Ship with Minimum Thrust Deduction Factor

In the preliminary design stage of the full form ships, in order to obtain a hull form with low resistance and maximum propulsion efficiency, an optimization design program for a full form ship with the minimum thrust deduction factor has been developed, which combined the potential flow theory and boundary layer theory with the optimization technique. In the optimization process, the Sequential Unconstrained Minimization Technique（SUMT） interior point method of Nonlinear Programming（NLP） was proposed with the minimum thrust deduction factor as the objective function. An appropriate displacement is a basic constraint condition, and the boundary layer separation is an additional one. The parameters of the hull form modification function are used as design variables. At last, the numerical optimization example for lines of after-body of 50000 DWT product oil tanker was provided, which indicated that the propulsion efficiency was improved distinctly by this optimal design method.

TYPES OF FLOW OVER LEESIDE OF A SLENDER TAPERED WING AT SUPERSONIC SPEED

A flow visualization experiment is reported over the leeside of a slender tapered wing with a leading edge sweep back angle of 65°and a bicovex section. By using laser vapor-screen. schlieren and oil-flow techniques. the test was carried out at Mach numbers of 1.10, 1.53, 2.53, 3.01, and 4.01 for angles of attack from 5°through 25°.Photos of flow off-body and on the surface have been taken. The vapor-screen photos show seven distinct types of flow developed over the delta region on the wing. These types of flow are displayed in a plane of Mach number and angle of attack normal to the leading-edge. In the region of side-edge, there are side vortices formed, and in the downstream of trailing-edge. vortex wakes shed. The variety of bow shock positions at different Mach numbers and the positions of separating lines induced by shock wave with Mach numbers and angles of attack have been obtained. based upon the schlieren plus the vapor-screen photos in the sections. The oil-flow visualization clearly shows primary reattachment. secondary separation. secondary reattachment lines. and side edge vortices on the lee-surface. The results of this test shows in good agreement with other relevant experiments and numerical simulation results.

Off-Design Performance Analysis of Axial Flow Fan in Helicopter

A theoretical calculation method of off-design performance is developed for an axial flow fan of oil cooling system in helicopter,including calculation of aerodynamic parameters and performance parameters.When calculating inlet shock loss,the shock loss coefficient is obtained by comparing results of theoretical calculation,experimental and numerical calculation.The theoretical results and numerical results show that all air velocity components increase from hub to shroud in main flow area at rated condition.Tip leakage vortex moves downstream as flow rate increases.When flow rate decreases,Re decreases,and boundary layer thickness from hub to shroud area all increases gradually.Tip leakage vortex moves upstream,and secondary loss increases.Low speed area in the passage is widened along with high speed area moving to hub area,influenced by boundary layer separation.Consequently wake area and jet area at fan outlet are both larger than rated condition.Therefore optimization design for off-design performance of the fan is required on aerodynamic parameters influencing fan loss.A reliable method is supplied for estimating altitude performance of lubricating system in helicopter.

An INDEHISCENT-Controlled Auxin Response Specifies the Separation Layer in Early Arabidopsis Fruit

Seed dispersal is an important moment in the life cycle of a plant species. In Arabidopsis thaliana, it is dependent on transcription factor INDEHISCENT （IND）-mediated specification of a separation layer in the dehiscence zone found in the margin between the valves （carpel walls） and the central replum of the developing fruit. It was proposed that IND specifies the separation layer by inducing a local auxin minimum at late stages of fruit development. Here we show that morphological differences between the ind mutant and wild-type fruit already arise at early stages of fruit development, coinciding with strong IND expression in the valve margin. We show that IND-reduced PIN-FORMED3 （PIN3） auxin efflux carrier abundance leads to an increased auxin response in the valve margin during early fruit develop- ment, and that the concomitant cell divisions that form the dehiscence zone are lacking in ind mutant fruit. Moreover, IND promoter-driven ectopic expression of the AGC kinases PINOID （PID） and WAG2 induced indehiscence by expelling auxin from the valve margin at stages 14-16 of fruit development through increased PIN3 abundance. Our results show that IND, besides its role at late stages of Arabi- dopsis fruit development, functions at early stages to facilitate the auxin-triggered cell divisions that form the dehiscence zone.

INVESTIGATION OF DOMINANT FREQUENCIES IN TRANSITION REYNOLDS NUMBER RANGE OF FLOW AROUND A CIRCULAR CYLINDER PARTⅡ: THEORETICAL DETERMINATION OF THE RELATIONSHIP BETWEEN VORTEX SHEDDING AND TRANSITION FREQUENCIES AT DIFFERENT REYNOLDS NUMBERS

An attempt has been made to explore whether the power relation can be obtained from theoretical considerations. The classical laminar and turbulent boundary layer concepts have been employed to determine appropriate values of the scaling lengths associated with vortex shedding and shear layer frequencies to predict the power law relationship with Reynolds number. The predicted results are in good agreement with experimental results. The findings will provide a greater insight into the overall phenomenon involved.

Experimental Study of Flow around a Circular Cylinder inside a Bubble Plume

This study experimentally explores the flow around a cylinder with circular cross-section placed inside a bubble plume. Small gas bubbles with diameter smaller than 0.06 mm are released from electrodes on the bottom of a water tank by electrolysis of water. The bubbles induce water flow around them as they rise because of buoyancy. Inside the generated bubble plume, a cylinder with diameter D of 30 mm is placed at 6.5D above the electrodes. The bubbles and water flow around the cylinder are visualized, and the bubble velocity distribution is measured. The experiments elucidate the bubble behavior around the cylinder, the separated shear layers originating at the cylinder surface, their roll-up, the bubble entrainment in the resultant large-scale eddies behind the cylinder, and the vortex shedding from the cylinder.

Stress and noises of steel box girders in Sutong Bridge

Sutong Bridge is a cable-stayed bridge with a main span of 1 088 m. 370 high-precision stress monitoring measured data show that in the process of hoisting the steel box girders,the stress of the main girders is in the fluctuant and complex state and many meteorological factors,such as sunshine radiation,temperature and wind,have important influence on the change of stress of the steel box girders. According to the real-time weather data,the stress data after the process of wavelet denoising from representative measuring points in different weather conditions is picked to establish the stress response brought by meteorological factors with Layered Separation method,thereby basically eliminating the influence of meteorological factors on the stress of main girders,so that accurate and reliable stress data can be got for steel box girders adjustment and cable-tensioned construction control.

Experimental Investigation of Separation and Transition Processes on a High-Lift Low-Pressure Turbine Profile Under Steady and Unsteady Inflow at Low Reynolds Number

The effects induced by the presence of incoming wakes on the boundary layer developing over a high-lift low-pressure turbine profile have been investigated in a linear cascade at mid-span.The tested Reynolds number is 70000,typical of the cruise operating condition.The results of the investigations performed under steady and unsteady inflow conditions are analyzed.The unsteady investigations have been performed at the reduced frequency of f+=0.62,representative of the real engine operating condition.Profile aerodynamic loadings as well as boundary layer velocity profiles have been measured to survey the separation and transition processes.Spectral analysis has been also performed to better understand the phenomena associated with the transition process under steady inflow.For the unsteady case,a phase-locked ensemble averaging technique has been employed to reconstruct the time-resolved boundary layer velocity distributions from the hot-wire instantaneous signal output.The ensemble-averaging technique allowed a detailed analysis of the effects induced by incoming wakes-boundary layer interaction in separation suppression.Time-resolved results are presented in terms of mean velocity and unresolved unsteadiness time-space plots.

Designing metal sulfide-based cathodes and separators for suppressing polysulfide shuttling in lithium-sulfur batteries

Lithium-sulfur(Li-S)batteries,known for their high energy density,are attracting extensive research interest as a promising next-generation energy storage technology.However,their widespread use has been hampered by certain issues,including the dissolution and migration of polysulfides,along with sluggish redox kinetics.Metal sulfides present a promising solution to these obstacles regarding their high electrical conductivity,strong chemical adsorption with polysulfides,and remarkable electrocatalytic capabilities for polysulfide conversion.In this review,the recent progress on the utilization of metal sulfide for suppressing polysulfide shuttling in Li-S batteries is systematically summarized,with a special focus on sulfur hosts and functional separators.The critical roles of metal sulfides in realizing high-performing Li-S batteries have been comprehensively discussed by correlating the materials’structure and electrochemical performances.Moreover,the remaining issues/challenges and future perspectives are highlighted.By offering a detailed understanding of the crucial roles of metal sulfides,this review dedicates to contributing valuable knowledge for the pursuit of high-efficiency Li-S batteries based on metal sulfides.

Controllable magnetic properties of cobalt ferrite particles derived from layered double hydroxide precursors

Cobalt ferrite CoxNi1-xFe2O4 （x = 0, 0.5, 1 ） particles with controllable magnetic properties have been prepared by calcination of co-substituted NiFe^2＋Fe^3＋ -layered double hydroxide （NiFe^2＋Fe^3＋-LDH） precursors prepared via a scalable method involving separate nucleation and aging steps （SNAS）. Their structural and magnetic characteristics were investigated by powder X-ray diffraction （XRD）, scanning electron microscopy （SEM） and vibrating sample magnetometry （VSM）. Measurements of magnetic properties show that the saturation magnetization （Ms） and coercivity （He） of the calcined products increased with increasing cobalt content. The LDH precursor-based product obtained by calcination of a mixture of CoFe^2＋Fe3^＋-LDH and NiFe^2＋Fe^3＋ -LDH powders with a Co/Ni molar ratio of 1：1, exhibits a moderate value of Ms and an increased value of He compared to the corresponding values for an Ni0.5Co0.5Fe2O4 material prepared by calcination of a Co0.5Ni0.5Fe^2＋Fe^3＋-LDH precursor, and a physical mixture of CoFe2O4 and NiFe2O4 with a Co/Ni molar ratio of 1 ： 1. These results may provide a way to regulate magnetic anisotropy of ferrite spinels by varying the composition of the LDH precursors.

On bypass transition in separation bubbles:a review

Transition from laminar flow to turbulent flow is of great practical interest as it occurs in many engineering flows and often plays a critical role in aerodynamics and heat transfer performance of those flow devices.There could be many routes through transition,depending on flow configuration,geometry and the way in which transition is initiated by a wide range of possible background disturbances such as free-stream turbulence,pressure gradient,acoustic noise,wall roughness and obstructions,periodic unsteady disturbance and so on.This paper presents a brief overview of wall bounded flow transition in general and focuses more on the transition process in the free shear layer of separation bubbles,demonstrating that at elevated free-stream turbulent intensity the so called bypass transition could occur in geometrically induced separation bubbles where the separation point is fixed.

Supersonic Flow Structure in the Entrance Part of a Mixing Chamber of 2D Model Ejector

The paper deals with experimental and numerical results of investigation into supersonic and transonic flow past a two-dimensional model ejector. Results of optical measurements show a flow structure and flow parameter development in the entrance part of the mixing chamber of the ejector. Numerical results are obtained by means of both the straight solution of shock waves in supersonic flow field using classical relations of parameters of shock waves and the Fluent 6 program. Results of numerical solutions are compared with experimental pictures of flow fields. Flow structure development in the mixing chamber is analysed in detail.

Experimental characteristics of oblique shock train upstream propagation

The structure and dynamics of an oblique shock train in a duct model are investigated experimentally in a hypersonic wind tunnel.Measurements of the pressure distribution in front of and across the oblique shock train have been taken and the dynamics of upstream propagation of the oblique shock train have been analyzed from the synchronized schlieren imaging with the dynamic pressure measurements.The formation and propagation of the oblique shock train are initiated by the throttling device at the downstream end of the duct model.Multiple reflected shocks,expansion fans and separated flow bubbles exist in the unthrottled flow,causing three adversepressure-gradient phases and three favorable-pressure-gradient phases upstream the oblique shock train.The leading edge of the oblique shock train propagates upstream,and translates to be asymmetric with the increase of backpressure.The upstream propagation rate of the oblique shock train increases rapidly when the leading edge of the oblique shock train encounters the separation bubble near the shock reflection point and the adverse-pressure-gradient phase,while the oblique shock train slow movement when the leading edge of the oblique shock train is in the favorablepressure-gradient phase for unthrottled flow.The asymmetric flow pattern and oscillatory nature of the oblique shock train are observed throughout the whole upstream propagation process.

Assessment of the predictive capability of RANS models in simulating mean-dering open channel flows

The predictive capability of Reynolds-averaged numerical simulation （RANS） models is investigated by simulating the flow in meandering open channel flumes and comparing the obtained results with the measured data. The flow structures of the two experiments are much different in order to get better insights. Two eddy viscosity turbulence models and different wall treatment methods are tested. Comparisons show that no essential difference exists among the predictions. The difference of turbulence models has a limited effect, and the near wall refinement improves the predictions slightly. Results show that, while the longitudinal velo- cities are generally well predicted, the predictive capability of the secondary flow is largely determined by the complexity of the flow structure. In Case 1 of a simple flow structure, the secondary flow velocity is reasonably predicted. In Case 2, consisting of sharp curved consecutive reverse bends, the flow structure becomes complex after the first bend, and the complex flow structure leads to the poor prediction of the secondary flow. The analysis shows that the high level of turbulence anisotropy is related with the boundary layer separation, but not with the flow structure complexity in the central area which definitely causes the poor prediction of RANS models. The turbulence model modifications and the wall treatment methods barely improve the predictive capability of RANS models in simulating complex flow structures.