In this research work,isolation of humic acid from coal of Northeastern region of India is reported.The study is also targeted for application of the coal-derived humic acid in acid mine drainage(AMD)water treatment a...In this research work,isolation of humic acid from coal of Northeastern region of India is reported.The study is also targeted for application of the coal-derived humic acid in acid mine drainage(AMD)water treatment and electrochemical devices.All the obtained results are compared with the standard humic acid and examined the formation of humic acid from the coal.The isolated coal-derived humic acid is found to be high degree of humifications and relatively stable up to about 200℃.The FTIR study indicates the formation of metal-humic acid complexes.On treatment with acidic water(AMD),the coal-derived humic acid was found to have the ability to remove toxic metal such as(in order)Pb>Cu>Zn>Cd.In addition,the preliminary electrochemical properties of the isolated humic acid are also discussed in the paper.The specific capacitance of the isolated coal-derived humic acid via cyclic voltammetry and charge-discharge analysis is found to be 7 mF/g at scan rate 10 mV/s and 22 mF/g within the potential window 0.4 V,respectively.The charge-discharge cycles are stable for more than 1000 cycles within the potential window 0.4 V.This study will create a new pathway for the further research in this field.展开更多
In order to effectively control the dust at the transshipment point with foam-sol, this paper attempted to study the characteristics of dust diffusion at transshipment point and the foam-sol foaming device with diffus...In order to effectively control the dust at the transshipment point with foam-sol, this paper attempted to study the characteristics of dust diffusion at transshipment point and the foam-sol foaming device with diffusion outlet was also designed in this paper. To study the diffusion rules of coal dust, fluent discrete phase model was utilized in the numerical simulation, as the coal dust was thrown down at a horizontal velocity of 2.5 m/s. A foam-sol foaming device was designed, through which foaming agent could be automatically sucked into the Venturi by the negative pressure. The automatic controller was also equipped,which could transform the energy of the compressed air into the constant pressure difference so that the gelling agent could be qualitatively added into the gel container. The diffusion outlet that could spray out foam-sol in a continuous, conical and 3D manner was also designed. Moreover, this paper also carried out the contrast experiments on dust removal efficiency among water, aqueous foam and foam-sol. The results clearly show that the symmetrical whirlpools appeared below the inlet where the largest whirlpool diameter was 0.52 m, and the horizontal distance from swirl range to the inlet was approximately0.69 m. By using the self-designed foaming device, the foaming was multiplied by 30 times and the volume ratio with water and foaming agent reached 95%:5%. In this context, the gas pressure was controlled at 0.3 MPa, with gas flow at 15 m3/h and water flow at 0.5 m3/h, with water pressure controlled between0.34 and 0.36 MPa. The foam-sol has the highest dust removal efficiency than other agents.展开更多
基金Authors are very much thankful to the Director of CSIR-NEIST,Jorhat for encouragement and CSIR,New Delhi for financial support(OLP-2031)to carry out the work.The authors are also very much thankful to Dr.Ponchami Sharma for her assistance during the samples collections and analysis and Dr.Jugal Bori for assistance in electron beam analysis of the samples.Authors express thanks to Dr.Jim Hower for his comments and English corrections.
文摘In this research work,isolation of humic acid from coal of Northeastern region of India is reported.The study is also targeted for application of the coal-derived humic acid in acid mine drainage(AMD)water treatment and electrochemical devices.All the obtained results are compared with the standard humic acid and examined the formation of humic acid from the coal.The isolated coal-derived humic acid is found to be high degree of humifications and relatively stable up to about 200℃.The FTIR study indicates the formation of metal-humic acid complexes.On treatment with acidic water(AMD),the coal-derived humic acid was found to have the ability to remove toxic metal such as(in order)Pb>Cu>Zn>Cd.In addition,the preliminary electrochemical properties of the isolated humic acid are also discussed in the paper.The specific capacitance of the isolated coal-derived humic acid via cyclic voltammetry and charge-discharge analysis is found to be 7 mF/g at scan rate 10 mV/s and 22 mF/g within the potential window 0.4 V,respectively.The charge-discharge cycles are stable for more than 1000 cycles within the potential window 0.4 V.This study will create a new pathway for the further research in this field.
基金supported by the National Natural Science Fund of China (No. 51304146)131 Innovative Talents Cultivation Engineering for Tianjin Province of Chinathe National Innovation Training Project of Undergraduate Student of China (No. 201210060042)
文摘In order to effectively control the dust at the transshipment point with foam-sol, this paper attempted to study the characteristics of dust diffusion at transshipment point and the foam-sol foaming device with diffusion outlet was also designed in this paper. To study the diffusion rules of coal dust, fluent discrete phase model was utilized in the numerical simulation, as the coal dust was thrown down at a horizontal velocity of 2.5 m/s. A foam-sol foaming device was designed, through which foaming agent could be automatically sucked into the Venturi by the negative pressure. The automatic controller was also equipped,which could transform the energy of the compressed air into the constant pressure difference so that the gelling agent could be qualitatively added into the gel container. The diffusion outlet that could spray out foam-sol in a continuous, conical and 3D manner was also designed. Moreover, this paper also carried out the contrast experiments on dust removal efficiency among water, aqueous foam and foam-sol. The results clearly show that the symmetrical whirlpools appeared below the inlet where the largest whirlpool diameter was 0.52 m, and the horizontal distance from swirl range to the inlet was approximately0.69 m. By using the self-designed foaming device, the foaming was multiplied by 30 times and the volume ratio with water and foaming agent reached 95%:5%. In this context, the gas pressure was controlled at 0.3 MPa, with gas flow at 15 m3/h and water flow at 0.5 m3/h, with water pressure controlled between0.34 and 0.36 MPa. The foam-sol has the highest dust removal efficiency than other agents.