Cobalt ferrite CoxNi1-xFe2O4 (x = 0, 0.5, 1 ) particles with controllable magnetic properties have been prepared by calcination of co-substituted NiFe^2+Fe^3+ -layered double hydroxide (NiFe^2+Fe^3+-LDH) precu...Cobalt ferrite CoxNi1-xFe2O4 (x = 0, 0.5, 1 ) particles with controllable magnetic properties have been prepared by calcination of co-substituted NiFe^2+Fe^3+ -layered double hydroxide (NiFe^2+Fe^3+-LDH) precursors prepared via a scalable method involving separate nucleation and aging steps (SNAS). Their structural and magnetic characteristics were investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometry (VSM). Measurements of magnetic properties show that the saturation magnetization (Ms) and coercivity (He) of the calcined products increased with increasing cobalt content. The LDH precursor-based product obtained by calcination of a mixture of CoFe^2+Fe3^+-LDH and NiFe^2+Fe^3+ -LDH powders with a Co/Ni molar ratio of 1:1, exhibits a moderate value of Ms and an increased value of He compared to the corresponding values for an Ni0.5Co0.5Fe2O4 material prepared by calcination of a Co0.5Ni0.5Fe^2+Fe^3+-LDH precursor, and a physical mixture of CoFe2O4 and NiFe2O4 with a Co/Ni molar ratio of 1 : 1. These results may provide a way to regulate magnetic anisotropy of ferrite spinels by varying the composition of the LDH precursors.展开更多
Cathode materials Li[CoxNiyMn1-x-y]O2 for lithium secondary batteries have been prepared by a new route using layered double hydroxides (LDHs) as a precursor. The resulting layered phase with the α- NaFe02 structur...Cathode materials Li[CoxNiyMn1-x-y]O2 for lithium secondary batteries have been prepared by a new route using layered double hydroxides (LDHs) as a precursor. The resulting layered phase with the α- NaFe02 structure crystallizes in the rhombohedral system, with space group R-3m having an interlayer spacing close to 0.47 nm. X-ray photoelectron spectroscopy (XPS) was used to measure the oxidation states of Co, Ni and Mn. The effects of varying the Co[Ni[Mn ratio on both the structure and electrochemical properties of Li[CoxNiyMn1-x-y]O2 have been investigated by X-ray diffraction and electrochemical tests. The products demonstrated a rather stable cycling behavior, with a reversible capacity of 118 mAh/g for the layered material with Co/Ni/Mn = 1/1/1.展开更多
Developing efficient oxygen evolution reaction(OER) electrocatalysts such as transition metal sulfides(TMSs) is of great importance to advance renewable hydrogen fuel toward further practical applications.Herein,NiCoS...Developing efficient oxygen evolution reaction(OER) electrocatalysts such as transition metal sulfides(TMSs) is of great importance to advance renewable hydrogen fuel toward further practical applications.Herein,NiCoS_(2) nanoparticles well decorated on double-sided N-doped reduced graphene oxide sheets(NiCoS_(2)/rGO) are prepared from an Al-containing ternary NiCoAl-layered double hydroxide precursor(NiCoAl-LDH) grown on GO support as an OER electrocatalyst.The Al-confinementassisted sulfurization,followed by selective acid treatment,endows the resulting NiCoS_(2)/rGO composite with the advantages:well-dispersed NiCoS_(2) nanoparticles,dualsided rGO support,as well as a large specific surface area of 119.4 m^(2)·g^(-1) and meso-/macroporous size distribution.The NiCoS_(2)/rGO electrocatalyst exhibits an overpotential of 273 mV at 10 mA·cm^(-2) and a good stability of 24 h,which outperform those of the counterparts of NiS_(2)/rGO and CoS_(2)/rGO.The results of electrochemical active surface area and electrochemical impedance spectra experimentally provide convincing rationales of the information of active sites and good conductivity,both underpin the enhanced electrocatalytic performances.展开更多
A method of preparing continuous(Al+Al2O3)-coated SiC fiber reinforced nickel matrix composite was presented,in which the diffusion between SiC fiber and nickel matrix could be prevented.Magnetron sputtering is use...A method of preparing continuous(Al+Al2O3)-coated SiC fiber reinforced nickel matrix composite was presented,in which the diffusion between SiC fiber and nickel matrix could be prevented.Magnetron sputtering is used to deposit Ni coating on the surface of the(Al+Al2O3)-coated SiC fiber in preparation of the precursor wires.It is shown that the deposited Ni coating combines well with the(Al+Al2O3) coating and has little negative effect on the tensile strength of(Al+Al2O3)-coated SiC fiber.Solid-state diffusion bonding process is employed to prepare the(Al+Al2O3)-coated SiC fiber reinforced nickel matrix with 37% fibers in volume.The solid-state diffusion bonding process is optimized and the optimum parameters are temperature of 870,pressure of 50 MPa and holding time of 2 h.Under this condition,the precursor wires can diffuse well,composite of full density can be formed and the(Al+Al2O3) coating is effective to restrict the reaction between SiC fiber and nickel matrix.展开更多
基金supported by the National Natural Science Foundation of China, the 111 Project (B07004)the Program for New Century Excellent Talents in Universities, the Beijing Nova Program (2007B021)the Natural Science Foundation for Young Teachers of Beijing University of Chemical Technology
文摘Cobalt ferrite CoxNi1-xFe2O4 (x = 0, 0.5, 1 ) particles with controllable magnetic properties have been prepared by calcination of co-substituted NiFe^2+Fe^3+ -layered double hydroxide (NiFe^2+Fe^3+-LDH) precursors prepared via a scalable method involving separate nucleation and aging steps (SNAS). Their structural and magnetic characteristics were investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometry (VSM). Measurements of magnetic properties show that the saturation magnetization (Ms) and coercivity (He) of the calcined products increased with increasing cobalt content. The LDH precursor-based product obtained by calcination of a mixture of CoFe^2+Fe3^+-LDH and NiFe^2+Fe^3+ -LDH powders with a Co/Ni molar ratio of 1:1, exhibits a moderate value of Ms and an increased value of He compared to the corresponding values for an Ni0.5Co0.5Fe2O4 material prepared by calcination of a Co0.5Ni0.5Fe^2+Fe^3+-LDH precursor, and a physical mixture of CoFe2O4 and NiFe2O4 with a Co/Ni molar ratio of 1 : 1. These results may provide a way to regulate magnetic anisotropy of ferrite spinels by varying the composition of the LDH precursors.
基金supported by the National Natural Science Foun-dation of China, the 111 Project (grant no.: B07004) the Natural Science Foundation for Young Teachers of Beijing University of Chemical Technology (grant no.: QN0723)
文摘Cathode materials Li[CoxNiyMn1-x-y]O2 for lithium secondary batteries have been prepared by a new route using layered double hydroxides (LDHs) as a precursor. The resulting layered phase with the α- NaFe02 structure crystallizes in the rhombohedral system, with space group R-3m having an interlayer spacing close to 0.47 nm. X-ray photoelectron spectroscopy (XPS) was used to measure the oxidation states of Co, Ni and Mn. The effects of varying the Co[Ni[Mn ratio on both the structure and electrochemical properties of Li[CoxNiyMn1-x-y]O2 have been investigated by X-ray diffraction and electrochemical tests. The products demonstrated a rather stable cycling behavior, with a reversible capacity of 118 mAh/g for the layered material with Co/Ni/Mn = 1/1/1.
基金financially supported by the National Natural Science Foundation of China(No.U1607128)。
文摘Developing efficient oxygen evolution reaction(OER) electrocatalysts such as transition metal sulfides(TMSs) is of great importance to advance renewable hydrogen fuel toward further practical applications.Herein,NiCoS_(2) nanoparticles well decorated on double-sided N-doped reduced graphene oxide sheets(NiCoS_(2)/rGO) are prepared from an Al-containing ternary NiCoAl-layered double hydroxide precursor(NiCoAl-LDH) grown on GO support as an OER electrocatalyst.The Al-confinementassisted sulfurization,followed by selective acid treatment,endows the resulting NiCoS_(2)/rGO composite with the advantages:well-dispersed NiCoS_(2) nanoparticles,dualsided rGO support,as well as a large specific surface area of 119.4 m^(2)·g^(-1) and meso-/macroporous size distribution.The NiCoS_(2)/rGO electrocatalyst exhibits an overpotential of 273 mV at 10 mA·cm^(-2) and a good stability of 24 h,which outperform those of the counterparts of NiS_(2)/rGO and CoS_(2)/rGO.The results of electrochemical active surface area and electrochemical impedance spectra experimentally provide convincing rationales of the information of active sites and good conductivity,both underpin the enhanced electrocatalytic performances.
文摘A method of preparing continuous(Al+Al2O3)-coated SiC fiber reinforced nickel matrix composite was presented,in which the diffusion between SiC fiber and nickel matrix could be prevented.Magnetron sputtering is used to deposit Ni coating on the surface of the(Al+Al2O3)-coated SiC fiber in preparation of the precursor wires.It is shown that the deposited Ni coating combines well with the(Al+Al2O3) coating and has little negative effect on the tensile strength of(Al+Al2O3)-coated SiC fiber.Solid-state diffusion bonding process is employed to prepare the(Al+Al2O3)-coated SiC fiber reinforced nickel matrix with 37% fibers in volume.The solid-state diffusion bonding process is optimized and the optimum parameters are temperature of 870,pressure of 50 MPa and holding time of 2 h.Under this condition,the precursor wires can diffuse well,composite of full density can be formed and the(Al+Al2O3) coating is effective to restrict the reaction between SiC fiber and nickel matrix.