Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components direct...Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components directly affects manufacturing,operation and storage performances of the umbilical.For the multi-layer cross-sectional layout design of the umbilical,a quantifiable multi-objective optimization model is established according to the operation and storage requirements.Considering the manufacturing factors,the multi-layering strategy based on contact point identification is introduced for a great number of functional components.Then,the GA-GLM global optimization algorithm is proposed combining the genetic algorithm and the generalized multiplier method,and the selection operator of the genetic algorithm is improved based on the steepest descent method.Genetic algorithm is used to find the optimal solution in the global space,which can converge from any initial layout to the feasible layout solution.The feasible layout solution is taken as the initial value of the generalized multiplier method for fast and accurate solution.Finally,taking umbilicals with a great number of components as examples,the results show that the cross-sectional performance of the umbilical obtained by optimization algorithm is better and the solution efficiency is higher.Meanwhile,the multi-layering strategy is effective and feasible.The design method proposed in this paper can quickly obtain the optimal multi-layer cross-sectional layout,which replaces the manual design,and provides useful reference and guidance for the umbilical industry.展开更多
An increasing number of researchers have researched fixture layout optimization for thin-walled part assembly during the past decades.However,few papers systematically review these researches.By analyzing existing lit...An increasing number of researchers have researched fixture layout optimization for thin-walled part assembly during the past decades.However,few papers systematically review these researches.By analyzing existing literature,this paper summarizes the process of fixture layout optimization and the methods applied.The process of optimization is made up of optimization objective setting,assembly variation/deformation modeling,and fixture layout optimization.This paper makes a review of the fixture layout for thin-walled parts according to these three steps.First,two different kinds of optimization objectives are introduced.Researchers usually consider in-plane variations or out-of-plane deformations when designing objectives.Then,modeling methods for assembly variation and deformation are divided into two categories:Mechanism-based and data-based methods.Several common methods are discussed respectively.After that,optimization algorithms are reviewed systematically.There are two kinds of optimization algorithms:Traditional nonlinear programming and heuristic algorithms.Finally,discussions on the current situation are provided.The research direction of fixture layout optimization in the future is discussed from three aspects:Objective setting,improving modeling accuracy and optimization algorithms.Also,a new research point for fixture layout optimization is discussed.This paper systematically reviews the research on fixture layout optimization for thin-walled parts,and provides a reference for future research in this field.展开更多
Large cavity structures are widely employed in aerospace engineering, such as thin-walled cylinders, blades andwings. Enhancing performance of aerial vehicles while reducing manufacturing costs and fuel consumptionhas...Large cavity structures are widely employed in aerospace engineering, such as thin-walled cylinders, blades andwings. Enhancing performance of aerial vehicles while reducing manufacturing costs and fuel consumptionhas become a focal point for contemporary researchers. Therefore, this paper aims to investigate the topologyoptimization of large cavity structures as a means to enhance their performance, safety, and efficiency. By usingthe variable density method, lightweight design is achieved without compromising structural strength. Theoptimization model considers both concentrated and distributed loads, and utilizes techniques like sensitivityfiltering and projection to obtain a robust optimized configuration. The mechanical properties are checked bycomparing the stress distribution and displacement of the unoptimized and optimized structures under the sameload. The results confirm that the optimized structures exhibit improved mechanical properties, thus offering keyinsights for engineering lightweight, high-strength large cavity structures.展开更多
A document layout can be more informative than merely a document’s visual and structural appearance.Thus,document layout analysis(DLA)is considered a necessary prerequisite for advanced processing and detailed docume...A document layout can be more informative than merely a document’s visual and structural appearance.Thus,document layout analysis(DLA)is considered a necessary prerequisite for advanced processing and detailed document image analysis to be further used in several applications and different objectives.This research extends the traditional approaches of DLA and introduces the concept of semantic document layout analysis(SDLA)by proposing a novel framework for semantic layout analysis and characterization of handwritten manuscripts.The proposed SDLA approach enables the derivation of implicit information and semantic characteristics,which can be effectively utilized in dozens of practical applications for various purposes,in a way bridging the semantic gap and providingmore understandable high-level document image analysis and more invariant characterization via absolute and relative labeling.This approach is validated and evaluated on a large dataset ofArabic handwrittenmanuscripts comprising complex layouts.The experimental work shows promising results in terms of accurate and effective semantic characteristic-based clustering and retrieval of handwritten manuscripts.It also indicates the expected efficacy of using the capabilities of the proposed approach in automating and facilitating many functional,reallife tasks such as effort estimation and pricing of transcription or typing of such complex manuscripts.展开更多
With sustaining change of production mode,layout planning is no longer a thing built once for all.Cellular layout(CL) is becoming a hotspot in the research field of manufacturing system layout.Traditional researches o...With sustaining change of production mode,layout planning is no longer a thing built once for all.Cellular layout(CL) is becoming a hotspot in the research field of manufacturing system layout.Traditional researches on layout planning are mainly concentrating on aspects of layout arithmetic,style and evaluation,etc.Relatively seldom efforts are paid to CL and its specific problems as cell formation(CF),equipment sharing and CL analysis.Through problem analyzing of layout in cellular manufacturing system(CMS),research approach of cell formation,interactive layout and layout analysis threaded with process interconnection relationship(PIR) is proposed.Typical key technologies in CL like CF technology based on similarity analysis of part processes,interactive visual layout technology,layout evaluation technology founded on PIR analysis and algorithm of cell equipment sharing are put forward.Against the background of one enterprise which encounters problems of low utility of key equipments and disperse material logistic,an example of four-cell layout is given.The CL adjustment and analysis results show that equipment with high level of sharing degree should be disposed around the boundary of its main cell,and be near to other sharing cells as possible; process route should be centralized by all means,so equipment adjustment is to be implemented along direction that route intersection can be decreased; giving consideration to the existence of discrete cell,logistic route and its density should be centralized to cells formed.The proposed research can help improve equipment utility and material logistic efficiency of CL,and can be popularized to other application availably.展开更多
The meta-heuristic algorithm is a global probabilistic search algorithm for the iterative solution.It has good performance in global optimization fields such as maximization.In this paper,a new adaptive parameter stra...The meta-heuristic algorithm is a global probabilistic search algorithm for the iterative solution.It has good performance in global optimization fields such as maximization.In this paper,a new adaptive parameter strategy and a parallel communication strategy are proposed to further improve the Cuckoo Search(CS)algorithm.This strategy greatly improves the convergence speed and accuracy of the algorithm and strengthens the algorithm’s ability to jump out of the local optimal.This paper compares the optimization performance of Parallel Adaptive Cuckoo Search(PACS)with CS,Parallel Cuckoo Search(PCS),Particle Swarm Optimization(PSO),Sine Cosine Algorithm(SCA),Grey Wolf Optimizer(GWO),Whale Optimization Algorithm(WOA),Differential Evolution(DE)and Artificial Bee Colony(ABC)algorithms by using the CEC-2013 test function.The results show that PACS algorithmoutperforms other algorithms in 20 of 28 test functions.Due to the superior performance of PACS algorithm,this paper uses it to solve the problem of the rectangular layout.Experimental results show that this scheme has a significant effect,and the material utilization rate is improved from89.5%to 97.8%after optimization.展开更多
There are lots of researches on fixture layout optimization for large thin-walled parts.Current researches focus on the positioning problem,i.e.,optimizing the positions of a constant number of fixtures.However,how to...There are lots of researches on fixture layout optimization for large thin-walled parts.Current researches focus on the positioning problem,i.e.,optimizing the positions of a constant number of fixtures.However,how to determine the number of fixtures is ignored.In most cases,the number of fixtures located on large thin-walled parts is determined based on engineering experience,which leads to huge fixture number and extra waste.Therefore,this paper constructs an optimization model to minimize the number of fixtures.The constraints are set in the optimization model to ensure that the part deformation is within the surface profile tolerance.In addition,the assembly gap between two parts is also controlled.To conduct the optimization,this paper develops an improved particle swarm optimization(IPSO)algorithm by integrating the shrinkage factor and adaptive inertia weight.In the algorithm,particles are encoded according to the fixture position.Each dimension of the particle is assigned to a sub-region by constraining the optional position range of each fixture to improve the optimization efficiency.Finally,a case study on ship curved panel assembly is provided to prove that our method can optimize the number of fixtures while meeting the assembly quality requirements.This research proposes a method to optimize the number of fixtures,which can reduce the number of fixtures and achieve deformation control at the same time.展开更多
Perforation is a pivotal technique employed to establish main flow channels within the reservoir formation at the outset of hydraulic fracturing operations.Optimizing perforation designs is critical for augmenting the...Perforation is a pivotal technique employed to establish main flow channels within the reservoir formation at the outset of hydraulic fracturing operations.Optimizing perforation designs is critical for augmenting the efficacy of hydraulic fracturing and boosting oil or gas production.In this study,we employ a hybrid finite-discrete element method,known as the continuous–discontinuous element method(CDEM),to simulate the initiation of post-perforation hydraulic fractures and to derive enhanced design parameters.The model incorporates the four most prevalent perforation geometries,as delineated in an engineering technical report.Real-world perforations deviate from the ideal cylindrical shape,exhibiting variable cross-sectional profiles that typically manifest as an initial constriction followed by an expansion,a feature consistent across all four perforation types.Our simulations take into account variations in perforation hole geometries,cross-sectional diameters,and perforation lengths.The findings show that perforations generated by the 39g DP3 HMX perforating bullet yield the lowest breakdown pressure,which inversely correlates with increases in sectional diameter and perforation length.Moreover,this study reveals the relationship between breakdown pressure and fracture degree,providing valuable insights for engineers and designers to refine perforation strategies.展开更多
Reducing the process variation is a significant concern for resistive random access memory(RRAM).Due to its ultrahigh integration density,RRAM arrays are prone to lithographic variation during the lithography process,...Reducing the process variation is a significant concern for resistive random access memory(RRAM).Due to its ultrahigh integration density,RRAM arrays are prone to lithographic variation during the lithography process,introducing electrical variation among different RRAM devices.In this work,an optical physical verification methodology for the RRAM array is developed,and the effects of different layout parameters on important electrical characteristics are systematically investigated.The results indicate that the RRAM devices can be categorized into three clusters according to their locations and lithography environments.The read resistance is more sensitive to the locations in the array(~30%)than SET/RESET voltage(<10%).The increase in the RRAM device length and the application of the optical proximity correction technique can help to reduce the variation to less than 10%,whereas it reduces RRAM read resistance by 4×,resulting in a higher power and area consumption.As such,we provide design guidelines to minimize the electrical variation of RRAM arrays due to the lithography process.展开更多
The replacement of Lingnan Taoist Zuting Temples from Lingbao Sect to Quanzhen Sect in the Qing Dynasty has led to the change of the layout of Taoist temples on Luofu Mountain. Through literature review, field researc...The replacement of Lingnan Taoist Zuting Temples from Lingbao Sect to Quanzhen Sect in the Qing Dynasty has led to the change of the layout of Taoist temples on Luofu Mountain. Through literature review, field research, image comparison and other research methods, the paper explores how the layout of the Taoist temples on Luofu Mountain evolved from the Four Taoist Temples in the Gehong period to the Five Taoist Temples in the Qing Dynasty under the influence of different Taoist ideologies, aiming to explore the cultural implications of the evolution of the layout of Lingnan Taoism Zuting Temple in the Qing Dynasty.展开更多
With the increasing demand for electrical services,wind farm layout optimization has been one of the biggest challenges that we have to deal with.Despite the promising performance of the heuristic algorithm on the rou...With the increasing demand for electrical services,wind farm layout optimization has been one of the biggest challenges that we have to deal with.Despite the promising performance of the heuristic algorithm on the route network design problem,the expressive capability and search performance of the algorithm on multi-objective problems remain unexplored.In this paper,the wind farm layout optimization problem is defined.Then,a multi-objective algorithm based on Graph Neural Network(GNN)and Variable Neighborhood Search(VNS)algorithm is proposed.GNN provides the basis representations for the following search algorithm so that the expressiveness and search accuracy of the algorithm can be improved.The multi-objective VNS algorithm is put forward by combining it with the multi-objective optimization algorithm to solve the problem with multiple objectives.The proposed algorithm is applied to the 18-node simulation example to evaluate the feasibility and practicality of the developed optimization strategy.The experiment on the simulation example shows that the proposed algorithm yields a reduction of 6.1% in Point of Common Coupling(PCC)over the current state-of-the-art algorithm,which means that the proposed algorithm designs a layout that improves the quality of the power supply by 6.1%at the same cost.The ablation experiments show that the proposed algorithm improves the power quality by more than 8.6% and 7.8% compared to both the original VNS algorithm and the multi-objective VNS algorithm.展开更多
In order to deal with the special spatio-temporal environmental changes encountered in the process of open-cast mining,taking Huolinhe No.1 Open-cast Mine as the research object,this paper studied its typical problems...In order to deal with the special spatio-temporal environmental changes encountered in the process of open-cast mining,taking Huolinhe No.1 Open-cast Mine as the research object,this paper studied its typical problems in river reconstruction and cultural relics protection.The study focused on eight key core aspects,including the design optimization of the spatial layout of the mining area,the accurate estimation of the mineral resources reserves,the scientific theoretical demonstration of the mining scale,the fine analysis and calculation of the stripping ratio,the comprehensive consideration of the transport distance and efficiency,the accurate judgment of the best time for the implementation of the transformation,the analysis and evaluation of the slope stability,and the overall planning of the production system.The results show that the extracted problem-solving strategies and scheme system for special mining conditions can not only provide specific and practical guidance for Huolinhe No.1 Open-cast Mine,but also serve as a valuable reference and practical reference for other open-cast mine enterprises facing similar challenges.展开更多
Optimizing Flow Path Design(FPD)is a popular research area in transportation system design,but its application to Overhead Transportation Systems(OTSs)has been limited.This study focuses on optimizing a double-spine f...Optimizing Flow Path Design(FPD)is a popular research area in transportation system design,but its application to Overhead Transportation Systems(OTSs)has been limited.This study focuses on optimizing a double-spine flow path design for OTSs with 10 stations by minimizing the total travel distance for both loaded and empty flows.We employ transportation methods,specifically the North-West Corner and Stepping-Stone methods,to determine empty vehicle travel flows.Additionally,the Tabu Search(TS)algorithm is applied to branch the 10 stations into two main layout branches.The results obtained from our proposed method demonstrate a reduction in the objective function value compared to the initial feasible solution.Furthermore,we explore howchanges in the parameters of the TS algorithm affect the optimal result.We validate the feasibility of our approach by comparing it with relevant literature and conducting additional tests on layouts with 20 and 30 stations.展开更多
The quality and safety of residents’water rely heavily on the design of municipal water supply and drainage pipes.Therefore,this paper aims to enhance the optimization of municipal water supply and drainage pipe desi...The quality and safety of residents’water rely heavily on the design of municipal water supply and drainage pipes.Therefore,this paper aims to enhance the optimization of municipal water supply and drainage pipe design by focusing on design requirements,principles,and key elements.Drawing from relevant design optimization experiences,technology advancements,and optimization measures,the research will analyze and consolidate the essential aspects of municipal water supply and drainage pipe design.The goal is to fundamentally elevate the quality standards of these designs,ensuring they meet the criteria for engineering project excellence.Through this comprehensive approach,we aim to contribute to the improvement and sustainability of water supply and drainage systems,safeguarding the well-being of residents.展开更多
Over the past decade, Graphics Processing Units (GPUs) have revolutionized high-performance computing, playing pivotal roles in advancing fields like IoT, autonomous vehicles, and exascale computing. Despite these adv...Over the past decade, Graphics Processing Units (GPUs) have revolutionized high-performance computing, playing pivotal roles in advancing fields like IoT, autonomous vehicles, and exascale computing. Despite these advancements, efficiently programming GPUs remains a daunting challenge, often relying on trial-and-error optimization methods. This paper introduces an optimization technique for CUDA programs through a novel Data Layout strategy, aimed at restructuring memory data arrangement to significantly enhance data access locality. Focusing on the dynamic programming algorithm for chained matrix multiplication—a critical operation across various domains including artificial intelligence (AI), high-performance computing (HPC), and the Internet of Things (IoT)—this technique facilitates more localized access. We specifically illustrate the importance of efficient matrix multiplication in these areas, underscoring the technique’s broader applicability and its potential to address some of the most pressing computational challenges in GPU-accelerated applications. Our findings reveal a remarkable reduction in memory consumption and a substantial 50% decrease in execution time for CUDA programs utilizing this technique, thereby setting a new benchmark for optimization in GPU computing.展开更多
Non-pillar mining,top-coal caving and protected coal seam mining are the most popular mining methods in coal exploitation,and the different mining layouts will change the stress state and failure mechanism of coal in ...Non-pillar mining,top-coal caving and protected coal seam mining are the most popular mining methods in coal exploitation,and the different mining layouts will change the stress state and failure mechanism of coal in front of the working face.In this paper,mining-induced mechanical behaviors under three mining layouts have been simulated in the laboratory to investigate the effects of mining layouts on the deformation and strength of coal.Furthermore,the coal failure mechanism under different mining layouts is analyzed microscopically.The experimental results indicate that the stage characteristics of the coal deformation are obvious.Under the serial action of non-pillar mining,top-coal caving and protected coal seam mining layouts,the values of radial deformation,volume strain and Poisson's ratio increase,while the peak strength and deformation modulus decrease at the same buried depth,and the peak strength under non-pillar mining,top-coal caving and protected coal seam mining is about 3.0,2.5 and 2.0 times of the initial confining pressure,respectively.The results also indicate that the trend of the coal deformation decreases with the increase of the buried depth under the same mining layout,while the strength and deformation modulus increase,and the failure mechanism under three mining layouts is dominated with shear/tensile failure.展开更多
This paper discusses the major problems in urban green space system (UGSS) planning at both general and special planning levels in China. At general planning level, the problems of the UGSS are mainly from the ignor...This paper discusses the major problems in urban green space system (UGSS) planning at both general and special planning levels in China. At general planning level, the problems of the UGSS are mainly from the ignorance in the characteristics of urban nature spaces and the limitation factors of the urban planning system. Great importance is attached to the green spaces in the built area of city, but the green spaces in surrounding areas of the city is unnoticed. Furthermore, because the area of UGSS planning is strictly limited by the administrative zoning, the green space system loses its integrity and rationality in spatial patterns. The schedules of urban development planning mismatched the paces and progresses of the ecological restoration cycles. At special plan level, the problem of the UGSS in China is that the green spaces quantity was over emphasized but the rationality of their layouts is neglected.. Meanwhile, the requirement of the spatial structures and the green spaces layouts to balance between the urban development and the natural ecological environments is often ignored. With regard to the layouts in the UGSS planning practices, the existing problems are the compromising to the existing land-uses, the 'filling in' approach to plan green spaces and an over-emphasis on the layout patterns.展开更多
In current research,a series of triaxial tests,which were employed to simulate three typical mining layouts(i.e.,top-coal caving,non-pillar mining and protected coal seam mining),were conducted on coal by using MTS815...In current research,a series of triaxial tests,which were employed to simulate three typical mining layouts(i.e.,top-coal caving,non-pillar mining and protected coal seam mining),were conducted on coal by using MTS815 Flex Test GT rock mechanics test system,and the fracture networks in the broken coal samples were qualitatively and quantitatively investigated by employing CT scanning and 3D reconstruction techniques.This work aimed at providing a detail description on the micro-structure and fractureconnectivity characteristics of rupture coal samples under different mining layouts.The results show that:(i)for protected coal seam mining layout,the coal specimens failure is in a compression-shear manner and oppositely,(ii)the tension-shear failure phenomenon is observed for top-coal caving and non-pillar mining layouts.By investigating the connectivity features of the generated fractures in the direction ofσ_1,under different mining layouts,it is found that the connectivity level of the fractures of the samples corresponding to non-pillar mining layout was the highest.展开更多
The layout effects and optimization of runoff storage and filtration facilities are crucial to the efficiency and management of the cost of runoff control, but related research is still lacking. In this study, scenari...The layout effects and optimization of runoff storage and filtration facilities are crucial to the efficiency and management of the cost of runoff control, but related research is still lacking. In this study, scenarios with different layouts were simulated using the storm water management model(SWMM), to investigate the layout effects on control efficiency with different precipitations. In a rainfall event with 50 mm of precipitation in two hours, 1820 scenarios with different layouts of four facilities constructed in 16 sub-catchments were simulated, the reduction rates of internal flow presented a standard deviation of 10.9%, and the difference between the maximum and minimum reduction rates reached59.7%. Based on weighting analysis, an integrated ranking index was obtained and used to determine the optimal layout scenarios considering different rainfall events. In the optimal scenario(storage and filtration facilities constructed in sub-catchments 14, 12, 7, and 2), the reduction rates of the total outflow reached 31.4%, 26.4%, and 14.7%, respectively, with 30, 50, and 80 mm of precipitation. The reduction rate of the internal outflow reached 95% with 50 mm of precipitation and approximately 56% with 80 mm of precipitation.展开更多
Generally, the cooler life can determine the blast furnace life. Theslag-metal skull frozen on the cooler can separate the cooler from the hot gas flow in blastfurnace. The key problem is how to freeze liquid slag-met...Generally, the cooler life can determine the blast furnace life. Theslag-metal skull frozen on the cooler can separate the cooler from the hot gas flow in blastfurnace. The key problem is how to freeze liquid slag-metal on the cooler, and the main measure isto decrease the hot surface temperature of the cooler. The computational technology of heat transferwas practically used for long campaign blast furnace design. The optimum design of the cast ironstave, copper stave, plate-stave combined system and flange stave was given by the computingresults. According to the results, the optimum arrangement of different coolers (cast iron or copperstave, flange stave and plate-stave combined system) on different height of blast furnace wall canbe found through all these temperature fields.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52001088,52271269,U1906233)the Natural Science Foundation of Heilongjiang Province(Grant No.LH2021E050)+2 种基金the State Key Laboratory of Ocean Engineering(Grant No.GKZD010084)Liaoning Province’s Xing Liao Talents Program(Grant No.XLYC2002108)Dalian City Supports Innovation and Entrepreneurship Projects for High-Level Talents(Grant No.2021RD16)。
文摘Marine umbilical is one of the key equipment for subsea oil and gas exploitation,which is usually integrated by a great number of different functional components with multi-layers.The layout of these components directly affects manufacturing,operation and storage performances of the umbilical.For the multi-layer cross-sectional layout design of the umbilical,a quantifiable multi-objective optimization model is established according to the operation and storage requirements.Considering the manufacturing factors,the multi-layering strategy based on contact point identification is introduced for a great number of functional components.Then,the GA-GLM global optimization algorithm is proposed combining the genetic algorithm and the generalized multiplier method,and the selection operator of the genetic algorithm is improved based on the steepest descent method.Genetic algorithm is used to find the optimal solution in the global space,which can converge from any initial layout to the feasible layout solution.The feasible layout solution is taken as the initial value of the generalized multiplier method for fast and accurate solution.Finally,taking umbilicals with a great number of components as examples,the results show that the cross-sectional performance of the umbilical obtained by optimization algorithm is better and the solution efficiency is higher.Meanwhile,the multi-layering strategy is effective and feasible.The design method proposed in this paper can quickly obtain the optimal multi-layer cross-sectional layout,which replaces the manual design,and provides useful reference and guidance for the umbilical industry.
基金Supported by National Natural Science Foundation of China(Grant No.52005371)Shanghai Municipal Natural Science Foundation of China(Grant No.22ZR1463900)+1 种基金Fundamental Research Funds for the Central Universities of China(Grant No.22120220649)State Key Laboratory of Mechanical System and Vibration of China(Grant No.MSV202318).
文摘An increasing number of researchers have researched fixture layout optimization for thin-walled part assembly during the past decades.However,few papers systematically review these researches.By analyzing existing literature,this paper summarizes the process of fixture layout optimization and the methods applied.The process of optimization is made up of optimization objective setting,assembly variation/deformation modeling,and fixture layout optimization.This paper makes a review of the fixture layout for thin-walled parts according to these three steps.First,two different kinds of optimization objectives are introduced.Researchers usually consider in-plane variations or out-of-plane deformations when designing objectives.Then,modeling methods for assembly variation and deformation are divided into two categories:Mechanism-based and data-based methods.Several common methods are discussed respectively.After that,optimization algorithms are reviewed systematically.There are two kinds of optimization algorithms:Traditional nonlinear programming and heuristic algorithms.Finally,discussions on the current situation are provided.The research direction of fixture layout optimization in the future is discussed from three aspects:Objective setting,improving modeling accuracy and optimization algorithms.Also,a new research point for fixture layout optimization is discussed.This paper systematically reviews the research on fixture layout optimization for thin-walled parts,and provides a reference for future research in this field.
基金the National Natural Science Foundation of China and the Natural Science Foundation of Jiangsu Province.It was also supported in part by Young Elite Scientists Sponsorship Program by CAST.
文摘Large cavity structures are widely employed in aerospace engineering, such as thin-walled cylinders, blades andwings. Enhancing performance of aerial vehicles while reducing manufacturing costs and fuel consumptionhas become a focal point for contemporary researchers. Therefore, this paper aims to investigate the topologyoptimization of large cavity structures as a means to enhance their performance, safety, and efficiency. By usingthe variable density method, lightweight design is achieved without compromising structural strength. Theoptimization model considers both concentrated and distributed loads, and utilizes techniques like sensitivityfiltering and projection to obtain a robust optimized configuration. The mechanical properties are checked bycomparing the stress distribution and displacement of the unoptimized and optimized structures under the sameload. The results confirm that the optimized structures exhibit improved mechanical properties, thus offering keyinsights for engineering lightweight, high-strength large cavity structures.
基金This research was supported and funded by KAU Scientific Endowment,King Abdulaziz University,Jeddah,Saudi Arabia.
文摘A document layout can be more informative than merely a document’s visual and structural appearance.Thus,document layout analysis(DLA)is considered a necessary prerequisite for advanced processing and detailed document image analysis to be further used in several applications and different objectives.This research extends the traditional approaches of DLA and introduces the concept of semantic document layout analysis(SDLA)by proposing a novel framework for semantic layout analysis and characterization of handwritten manuscripts.The proposed SDLA approach enables the derivation of implicit information and semantic characteristics,which can be effectively utilized in dozens of practical applications for various purposes,in a way bridging the semantic gap and providingmore understandable high-level document image analysis and more invariant characterization via absolute and relative labeling.This approach is validated and evaluated on a large dataset ofArabic handwrittenmanuscripts comprising complex layouts.The experimental work shows promising results in terms of accurate and effective semantic characteristic-based clustering and retrieval of handwritten manuscripts.It also indicates the expected efficacy of using the capabilities of the proposed approach in automating and facilitating many functional,reallife tasks such as effort estimation and pricing of transcription or typing of such complex manuscripts.
基金supported by Defence Advanced Research Program of ChinaFoundation Research Program of Beijing Institute of Technology,China (Grant No. 20080342003)
文摘With sustaining change of production mode,layout planning is no longer a thing built once for all.Cellular layout(CL) is becoming a hotspot in the research field of manufacturing system layout.Traditional researches on layout planning are mainly concentrating on aspects of layout arithmetic,style and evaluation,etc.Relatively seldom efforts are paid to CL and its specific problems as cell formation(CF),equipment sharing and CL analysis.Through problem analyzing of layout in cellular manufacturing system(CMS),research approach of cell formation,interactive layout and layout analysis threaded with process interconnection relationship(PIR) is proposed.Typical key technologies in CL like CF technology based on similarity analysis of part processes,interactive visual layout technology,layout evaluation technology founded on PIR analysis and algorithm of cell equipment sharing are put forward.Against the background of one enterprise which encounters problems of low utility of key equipments and disperse material logistic,an example of four-cell layout is given.The CL adjustment and analysis results show that equipment with high level of sharing degree should be disposed around the boundary of its main cell,and be near to other sharing cells as possible; process route should be centralized by all means,so equipment adjustment is to be implemented along direction that route intersection can be decreased; giving consideration to the existence of discrete cell,logistic route and its density should be centralized to cells formed.The proposed research can help improve equipment utility and material logistic efficiency of CL,and can be popularized to other application availably.
基金funded by the NationalKey Research and Development Program of China under Grant No.11974373.
文摘The meta-heuristic algorithm is a global probabilistic search algorithm for the iterative solution.It has good performance in global optimization fields such as maximization.In this paper,a new adaptive parameter strategy and a parallel communication strategy are proposed to further improve the Cuckoo Search(CS)algorithm.This strategy greatly improves the convergence speed and accuracy of the algorithm and strengthens the algorithm’s ability to jump out of the local optimal.This paper compares the optimization performance of Parallel Adaptive Cuckoo Search(PACS)with CS,Parallel Cuckoo Search(PCS),Particle Swarm Optimization(PSO),Sine Cosine Algorithm(SCA),Grey Wolf Optimizer(GWO),Whale Optimization Algorithm(WOA),Differential Evolution(DE)and Artificial Bee Colony(ABC)algorithms by using the CEC-2013 test function.The results show that PACS algorithmoutperforms other algorithms in 20 of 28 test functions.Due to the superior performance of PACS algorithm,this paper uses it to solve the problem of the rectangular layout.Experimental results show that this scheme has a significant effect,and the material utilization rate is improved from89.5%to 97.8%after optimization.
基金Supported by National Natural Science Foundation of China(Grant No.52005371)Shanghai Pujiang Program of China(Grant No.2020PJD071)+1 种基金Shanghai Municipal Natural Science Foundation of China(Grant No.22ZR1463900)Fundamental Research Funds for the Central Universities of China.
文摘There are lots of researches on fixture layout optimization for large thin-walled parts.Current researches focus on the positioning problem,i.e.,optimizing the positions of a constant number of fixtures.However,how to determine the number of fixtures is ignored.In most cases,the number of fixtures located on large thin-walled parts is determined based on engineering experience,which leads to huge fixture number and extra waste.Therefore,this paper constructs an optimization model to minimize the number of fixtures.The constraints are set in the optimization model to ensure that the part deformation is within the surface profile tolerance.In addition,the assembly gap between two parts is also controlled.To conduct the optimization,this paper develops an improved particle swarm optimization(IPSO)algorithm by integrating the shrinkage factor and adaptive inertia weight.In the algorithm,particles are encoded according to the fixture position.Each dimension of the particle is assigned to a sub-region by constraining the optional position range of each fixture to improve the optimization efficiency.Finally,a case study on ship curved panel assembly is provided to prove that our method can optimize the number of fixtures while meeting the assembly quality requirements.This research proposes a method to optimize the number of fixtures,which can reduce the number of fixtures and achieve deformation control at the same time.
基金support from the National Natural Science Foundation of China(Grant Nos.52178324,12102059)the China Postdoctoral Science Foundation(Grant No.2023M743604)+1 种基金the Beijing Natural Science Foundation(Grant No.3212027),the National Key R&D Program of China(Grant No.2023YFC3007203)the 2019 Foreign Experts Plan of Hebei Province.
文摘Perforation is a pivotal technique employed to establish main flow channels within the reservoir formation at the outset of hydraulic fracturing operations.Optimizing perforation designs is critical for augmenting the efficacy of hydraulic fracturing and boosting oil or gas production.In this study,we employ a hybrid finite-discrete element method,known as the continuous–discontinuous element method(CDEM),to simulate the initiation of post-perforation hydraulic fractures and to derive enhanced design parameters.The model incorporates the four most prevalent perforation geometries,as delineated in an engineering technical report.Real-world perforations deviate from the ideal cylindrical shape,exhibiting variable cross-sectional profiles that typically manifest as an initial constriction followed by an expansion,a feature consistent across all four perforation types.Our simulations take into account variations in perforation hole geometries,cross-sectional diameters,and perforation lengths.The findings show that perforations generated by the 39g DP3 HMX perforating bullet yield the lowest breakdown pressure,which inversely correlates with increases in sectional diameter and perforation length.Moreover,this study reveals the relationship between breakdown pressure and fracture degree,providing valuable insights for engineers and designers to refine perforation strategies.
基金supported in part by the Open Fund of State Key Laboratory of Integrated Chips and Systems,Fudan Universityin part by the National Science Foundation of China under Grant No.62304133 and No.62350610271.
文摘Reducing the process variation is a significant concern for resistive random access memory(RRAM).Due to its ultrahigh integration density,RRAM arrays are prone to lithographic variation during the lithography process,introducing electrical variation among different RRAM devices.In this work,an optical physical verification methodology for the RRAM array is developed,and the effects of different layout parameters on important electrical characteristics are systematically investigated.The results indicate that the RRAM devices can be categorized into three clusters according to their locations and lithography environments.The read resistance is more sensitive to the locations in the array(~30%)than SET/RESET voltage(<10%).The increase in the RRAM device length and the application of the optical proximity correction technique can help to reduce the variation to less than 10%,whereas it reduces RRAM read resistance by 4×,resulting in a higher power and area consumption.As such,we provide design guidelines to minimize the electrical variation of RRAM arrays due to the lithography process.
文摘The replacement of Lingnan Taoist Zuting Temples from Lingbao Sect to Quanzhen Sect in the Qing Dynasty has led to the change of the layout of Taoist temples on Luofu Mountain. Through literature review, field research, image comparison and other research methods, the paper explores how the layout of the Taoist temples on Luofu Mountain evolved from the Four Taoist Temples in the Gehong period to the Five Taoist Temples in the Qing Dynasty under the influence of different Taoist ideologies, aiming to explore the cultural implications of the evolution of the layout of Lingnan Taoism Zuting Temple in the Qing Dynasty.
基金supported by the Natural Science Foundation of Zhejiang Province(LY19A020001).
文摘With the increasing demand for electrical services,wind farm layout optimization has been one of the biggest challenges that we have to deal with.Despite the promising performance of the heuristic algorithm on the route network design problem,the expressive capability and search performance of the algorithm on multi-objective problems remain unexplored.In this paper,the wind farm layout optimization problem is defined.Then,a multi-objective algorithm based on Graph Neural Network(GNN)and Variable Neighborhood Search(VNS)algorithm is proposed.GNN provides the basis representations for the following search algorithm so that the expressiveness and search accuracy of the algorithm can be improved.The multi-objective VNS algorithm is put forward by combining it with the multi-objective optimization algorithm to solve the problem with multiple objectives.The proposed algorithm is applied to the 18-node simulation example to evaluate the feasibility and practicality of the developed optimization strategy.The experiment on the simulation example shows that the proposed algorithm yields a reduction of 6.1% in Point of Common Coupling(PCC)over the current state-of-the-art algorithm,which means that the proposed algorithm designs a layout that improves the quality of the power supply by 6.1%at the same cost.The ablation experiments show that the proposed algorithm improves the power quality by more than 8.6% and 7.8% compared to both the original VNS algorithm and the multi-objective VNS algorithm.
文摘In order to deal with the special spatio-temporal environmental changes encountered in the process of open-cast mining,taking Huolinhe No.1 Open-cast Mine as the research object,this paper studied its typical problems in river reconstruction and cultural relics protection.The study focused on eight key core aspects,including the design optimization of the spatial layout of the mining area,the accurate estimation of the mineral resources reserves,the scientific theoretical demonstration of the mining scale,the fine analysis and calculation of the stripping ratio,the comprehensive consideration of the transport distance and efficiency,the accurate judgment of the best time for the implementation of the transformation,the analysis and evaluation of the slope stability,and the overall planning of the production system.The results show that the extracted problem-solving strategies and scheme system for special mining conditions can not only provide specific and practical guidance for Huolinhe No.1 Open-cast Mine,but also serve as a valuable reference and practical reference for other open-cast mine enterprises facing similar challenges.
基金funded by Ho Chi Minh City University of Technology(HCMUT),VNU-HCM under Grant Number B2021-20-04.
文摘Optimizing Flow Path Design(FPD)is a popular research area in transportation system design,but its application to Overhead Transportation Systems(OTSs)has been limited.This study focuses on optimizing a double-spine flow path design for OTSs with 10 stations by minimizing the total travel distance for both loaded and empty flows.We employ transportation methods,specifically the North-West Corner and Stepping-Stone methods,to determine empty vehicle travel flows.Additionally,the Tabu Search(TS)algorithm is applied to branch the 10 stations into two main layout branches.The results obtained from our proposed method demonstrate a reduction in the objective function value compared to the initial feasible solution.Furthermore,we explore howchanges in the parameters of the TS algorithm affect the optimal result.We validate the feasibility of our approach by comparing it with relevant literature and conducting additional tests on layouts with 20 and 30 stations.
文摘The quality and safety of residents’water rely heavily on the design of municipal water supply and drainage pipes.Therefore,this paper aims to enhance the optimization of municipal water supply and drainage pipe design by focusing on design requirements,principles,and key elements.Drawing from relevant design optimization experiences,technology advancements,and optimization measures,the research will analyze and consolidate the essential aspects of municipal water supply and drainage pipe design.The goal is to fundamentally elevate the quality standards of these designs,ensuring they meet the criteria for engineering project excellence.Through this comprehensive approach,we aim to contribute to the improvement and sustainability of water supply and drainage systems,safeguarding the well-being of residents.
文摘Over the past decade, Graphics Processing Units (GPUs) have revolutionized high-performance computing, playing pivotal roles in advancing fields like IoT, autonomous vehicles, and exascale computing. Despite these advancements, efficiently programming GPUs remains a daunting challenge, often relying on trial-and-error optimization methods. This paper introduces an optimization technique for CUDA programs through a novel Data Layout strategy, aimed at restructuring memory data arrangement to significantly enhance data access locality. Focusing on the dynamic programming algorithm for chained matrix multiplication—a critical operation across various domains including artificial intelligence (AI), high-performance computing (HPC), and the Internet of Things (IoT)—this technique facilitates more localized access. We specifically illustrate the importance of efficient matrix multiplication in these areas, underscoring the technique’s broader applicability and its potential to address some of the most pressing computational challenges in GPU-accelerated applications. Our findings reveal a remarkable reduction in memory consumption and a substantial 50% decrease in execution time for CUDA programs utilizing this technique, thereby setting a new benchmark for optimization in GPU computing.
基金funded by the State Key Basic Research Program of China(No.2011CB201201)the National Key TechnologyR&D Program(No.2008BAB36B07)the National Natural Science Foundation of China(Nos.51134018 and 50674092)
文摘Non-pillar mining,top-coal caving and protected coal seam mining are the most popular mining methods in coal exploitation,and the different mining layouts will change the stress state and failure mechanism of coal in front of the working face.In this paper,mining-induced mechanical behaviors under three mining layouts have been simulated in the laboratory to investigate the effects of mining layouts on the deformation and strength of coal.Furthermore,the coal failure mechanism under different mining layouts is analyzed microscopically.The experimental results indicate that the stage characteristics of the coal deformation are obvious.Under the serial action of non-pillar mining,top-coal caving and protected coal seam mining layouts,the values of radial deformation,volume strain and Poisson's ratio increase,while the peak strength and deformation modulus decrease at the same buried depth,and the peak strength under non-pillar mining,top-coal caving and protected coal seam mining is about 3.0,2.5 and 2.0 times of the initial confining pressure,respectively.The results also indicate that the trend of the coal deformation decreases with the increase of the buried depth under the same mining layout,while the strength and deformation modulus increase,and the failure mechanism under three mining layouts is dominated with shear/tensile failure.
文摘This paper discusses the major problems in urban green space system (UGSS) planning at both general and special planning levels in China. At general planning level, the problems of the UGSS are mainly from the ignorance in the characteristics of urban nature spaces and the limitation factors of the urban planning system. Great importance is attached to the green spaces in the built area of city, but the green spaces in surrounding areas of the city is unnoticed. Furthermore, because the area of UGSS planning is strictly limited by the administrative zoning, the green space system loses its integrity and rationality in spatial patterns. The schedules of urban development planning mismatched the paces and progresses of the ecological restoration cycles. At special plan level, the problem of the UGSS in China is that the green spaces quantity was over emphasized but the rationality of their layouts is neglected.. Meanwhile, the requirement of the spatial structures and the green spaces layouts to balance between the urban development and the natural ecological environments is often ignored. With regard to the layouts in the UGSS planning practices, the existing problems are the compromising to the existing land-uses, the 'filling in' approach to plan green spaces and an over-emphasis on the layout patterns.
基金financially supported by the Major State Fundamental Research Project of China(Nos.2011CB201201and2010CB226802)the National Natural Science Foundation of China(No.51204113)the Youth Science and Technology Fund of Sichuan Province(No.2012JQ0031)
文摘In current research,a series of triaxial tests,which were employed to simulate three typical mining layouts(i.e.,top-coal caving,non-pillar mining and protected coal seam mining),were conducted on coal by using MTS815 Flex Test GT rock mechanics test system,and the fracture networks in the broken coal samples were qualitatively and quantitatively investigated by employing CT scanning and 3D reconstruction techniques.This work aimed at providing a detail description on the micro-structure and fractureconnectivity characteristics of rupture coal samples under different mining layouts.The results show that:(i)for protected coal seam mining layout,the coal specimens failure is in a compression-shear manner and oppositely,(ii)the tension-shear failure phenomenon is observed for top-coal caving and non-pillar mining layouts.By investigating the connectivity features of the generated fractures in the direction ofσ_1,under different mining layouts,it is found that the connectivity level of the fractures of the samples corresponding to non-pillar mining layout was the highest.
基金supported by the Major Science and Technology Program for Water Pollution Control and Management of China(Grant No.2011ZX07301-002)
文摘The layout effects and optimization of runoff storage and filtration facilities are crucial to the efficiency and management of the cost of runoff control, but related research is still lacking. In this study, scenarios with different layouts were simulated using the storm water management model(SWMM), to investigate the layout effects on control efficiency with different precipitations. In a rainfall event with 50 mm of precipitation in two hours, 1820 scenarios with different layouts of four facilities constructed in 16 sub-catchments were simulated, the reduction rates of internal flow presented a standard deviation of 10.9%, and the difference between the maximum and minimum reduction rates reached59.7%. Based on weighting analysis, an integrated ranking index was obtained and used to determine the optimal layout scenarios considering different rainfall events. In the optimal scenario(storage and filtration facilities constructed in sub-catchments 14, 12, 7, and 2), the reduction rates of the total outflow reached 31.4%, 26.4%, and 14.7%, respectively, with 30, 50, and 80 mm of precipitation. The reduction rate of the internal outflow reached 95% with 50 mm of precipitation and approximately 56% with 80 mm of precipitation.
文摘Generally, the cooler life can determine the blast furnace life. Theslag-metal skull frozen on the cooler can separate the cooler from the hot gas flow in blastfurnace. The key problem is how to freeze liquid slag-metal on the cooler, and the main measure isto decrease the hot surface temperature of the cooler. The computational technology of heat transferwas practically used for long campaign blast furnace design. The optimum design of the cast ironstave, copper stave, plate-stave combined system and flange stave was given by the computingresults. According to the results, the optimum arrangement of different coolers (cast iron or copperstave, flange stave and plate-stave combined system) on different height of blast furnace wall canbe found through all these temperature fields.