Selective leaching of lithium from spent lithium-ion batteries using sulfuric acid and oxalic acid

Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a series of separation steps such as precipitation,extraction,and stripping to separate the individual valuable metals.In this study,we present a process for selectively leaching lithium through the synergistic effect of sulfuric and oxalic acids.Under optimal leaching conditions(leaching time of 1.5 h,leaching temperature of 70°C,liquid-solid ratio of 4 mL/g,oxalic acid ratio of 1.3,and sulfuric acid ratio of 1.3),the lithium leaching efficiency reached89.6%,and the leaching efficiencies of Ni,Co,and Mn were 12.8%,6.5%,and 21.7%.X-ray diffraction(XRD)and inductively coupled plasma optical emission spectrometer(ICP-OES)analyses showed that most of the Ni,Co,and Mn in the raw material remained as solid residue oxides and oxalates.This study offers a new approach to enriching the relevant theory for selectively recovering lithium from spent LIBs.

Recovery of Li, Ni, Co and Mn from spent lithium-ion batteries assisted by organic acids: Process optimization and leaching mechanism

The proper recycling of spent lithium-ion batteries(LIBs)can promote the recovery and utilization of valuable resources,while also negative environmental effects resulting from the presence of toxic and hazardous substances.In this study,a new environmentally friendly hydro-metallurgical process was proposed for leaching lithium(Li),nickel(Ni),cobalt(Co),and manganese(Mn)from spent LIBs using sulfuric acid with citric acid as a reductant.The effects of the concentration of sulfuric acid,the leaching temperature,the leaching time,the solid-liquid ratio,and the reducing agent dosage on the leaching behavior of the above elements were investigated.Key parameters were optimized using response surface methodology(RSM)to maximize the recovery of metals from spent LIBs.The maxim-um recovery efficiencies of Li,Ni,Co,and Mn can reach 99.08%,98.76%,98.33%,and 97.63%.under the optimized conditions(the sulfuric acid concentration was 1.16 mol/L,the citric acid dosage was 15wt%,the solid-liquid ratio was 40 g/L,and the temperature was 83℃ for 120 min),respectively.It was found that in the collaborative leaching process of sulfuric acid and citric acid,the citric acid initially provided strong reducing CO_(2)^(-),and the transition metal ions in the high state underwent a reduction reaction to produce transition metal ions in the low state.Additionally,citric acid can also act as a proton donor and chelate with lower-priced transition metal ions,thus speeding up the dissolution process.

Leaching of vanadium from stone coal with sulfuric acid

The effects of roasting, mass ratio of H2SO4 to stone coal, leaching temperature, liquid-to-solid ratio, grinding fineness of stone coal, and two-stage counter-current leaching on the vanadium leaching ratio were studied. The results show that the vanadium leaching ratio of roasted stone coal through two-stage counter-current leaching can reach 65.1% at the mass ratio of H2SO4 to stone coal of 20%, leaching temperature of 95℃, leaching time of 30 h, liquid-to-solid ratio of 1.1 mL·g^-1, and grinding fineness of 0.1 mm, which can serve as an experimental basis for the production of vanadium from stone coal.

Kinetics of nickel leaching from roasting-dissolving residue of spent catalyst with sulfuric acid

Sulfuric acid leaching process was applied to extract nickel from roasting-dissolving residue of a spent catalyst, the effect of different parameters on nickel extraction was investigated by leaching experiments, and the leaching kinetics of nickel was analyzed. The experimental results indicate that the effects of particle size and sulfuric acid concentration on the nickel extraction are remarkable; the effect of reaction temperature is mild; while the effect of stirring speed in the range of 400-1 200 r/min is negligible. Decreasing particle size or increasing sulfuric acid concentration and reaction temperature, the nickel extraction efficiency is improved. 93.5% of nickel in residue is extracted under suitable leaching conditions, including particle size （0.074-0.100） mm, sulfuric acid concentration 30% （mass fraction）, temperature 80 ~C, reaction time 180 min, mass ratio of liquid to solid 10 and stirring speed 800 r/min. The leaching kinetics analyses shows that the reaction rate of leaching process is controlled by diffusion through the product layer, and the calculated activation energy of 15.8 kJ/mol is characteristic for a diffusion controlled process.

Effects of mechanical activation and oxidation-reduction on hydrochloric acid leaching of Panxi ilmenite concentration

The effects of oxidation-reduction treatment and mechanical activation on the hydrochloric acid leaching performance of Panxi ilmenite concentration were investigated.The results show that both of oxidation-reduction treatment and mechanical activation significantly accelerate the extraction of Fe,Ca and Mg from Panxi ilmenite concentration;however,the CaO and MgO contents of the calcined residues obtained from oxidized-reduced ilmenite concentration are higher than the standard values required by chlorination process.The Ca and Mg in oxidized-reduced ilmenite concentration can be leached much faster after mechanical activation,yielding a synthetic rutile which meets the requirements of chlorination process containing 90.50% TiO2 and 1.37% total iron as well as combined CaO and MgO of 1.00%.The optimum oxidation and reduction conditions are as follows：oxidization at 900 ℃ in the presence of oxygen for 15 min and reduction at 750 ℃ by hydrogen for 30 min.

Reductive acid leaching of valuable metals from spent lithium-ion batteries using hydrazine sulfate as reductant

Hydrazine sulfate was used as a reducing agent for the leaching of Li,Ni,Co and Mn from spent lithium-ion batteries.The effects of the reaction conditions on the leaching mechanism and kinetics were characterized and examined.97%of the available Li,96%of the available Ni,95%of the available Co,and 86%of the available Mn are extracted under the following optimized conditions:sulfuric acid concentration of 2.0 mol/L,hydrazine sulfate dosage of 30 g/L,solid-to-liquid ratio of 50 g/L,temperature of 80℃,and leaching time of 60 min.The activation energies of the leaching are determined to be 44.32,59.37 and 55.62 k J/mol for Li,Ni and Co,respectively.By performing X-ray diffraction and scanning electron microscopy in conjunction with energy dispersive X-ray spectroscopy,it is confirmed that the main phase in the leaching residue is MnO2.The results show that hydrazine sulfate is an effective reducing agent in the acid leaching process for spent lithium-ion batteries.

Pressure leaching of zinc silicate ore in sulfuric acid medium

Zinc silicate ore was characterized mineralogically and the results showed that zinc exists mainly as hemimorphite and smithsonite in the sample.Sulfuric acid pressure leaching of zinc silicate ore was carried out to assess the effect of particle size,sulfuric acid concentration,pressure,reaction time and temperature on the extraction of zinc and the dissolution of silica.Under the optimum conditions employed,up to 99.25% of zinc extraction and 0.20% silica dissolution are obtained.The main minerals in leaching residue are quartz and small amounts of undissolved oxide minerals of iron,lead and aluminum are associated with quartz.

Study on mechanisms of different sulfuric acid leaching technologies of chromite

The extraction of chromate from chromite via the sulfuric acid leaching process has strong potential for practical use because it is a simple and environmentally friendly process. This paper aims to study the sulfuric acid leaching process using chromite as a raw material via either microwave irradiation or in the presence of an oxidizing agent. The results show that the main phases in Pakistan chromite are ferrichromspinel, chrompicotite, hortonolite, and silicate embedded around the spinel phases. Compared with the process with an oxidizing agent, the process involving microwaves has a higher leaching efficiency. When the mass fraction of sulfuric acid was 80% and the leaching time was 20 min, the efficiency could exceed 85%. In addition, the mechanisms of these two technologies fundamentally differ. When the leaching was processed in the presence of an oxidizing agent, the silicate was leached first and then expanded. By contrast, in the case of leaching under microwave irradiation, the chromite was dissolved layer by layer and numerous cracks appeared at the particle surface because of thermal shock. In addition, the silicate phase shrunk instead of expanding.

Sulfuric acid leaching of high iron-bearing zinc calcine

Sulfuric acid leaching of high iron-bearing zinc calcine was investigated to assess the effects of sulfuric acid concentration, liquid-to-solid ratio, leaching time, leaching temperature, and the stirring speed on the leaching rates of zinc and iron. The results showed that the sulfuric acid concentration, liquid-to-solid ratio, leaching time, and leaching temperature strongly influenced the leaching of zinc and iron, whereas stirring speed had little influence. Zinc was mainly leached and the leaching rate of iron was low when the sulfuric acid concentration was less than 100 g/L. At sulfuric acid concentrations higher than 100 g/L, the leaching rate of iron increased quickly with increasing sulfuric acid concentration. This behavior is attributed to iron-bearing minerals such as zinc ferrite in zinc calcine dissolving at high temperatures and high sulfuric acid concentrations but not at low temperatures and low sulfuric acid concentrations.

Kinetic study of high-pressure acid leaching of Mg and Ni from serpentine

Inner Mongolian serpentine ore was subjected to sulfuric acid leaching tests,and the effects of the leaching process parameters on the leaching efficiency of different metals were investigated.The leaching efficiency of Mg,Fe,Al,Ni,and Co reaches 93.98%,60.09%,82.08%,90.58%,and 94.06%,respectively,under the leaching conditions of 5 mol/L H_(2)SO_(4),liquid/solid ratio of 4 mL/g,and leaching temperature 100℃.Hence,the valuable metals in serpentine were effectively recovered by sulfuric acid leaching.The leaching behaviors of Mg,Fe,and a small amount of Al were analyzed using X-ray diffraction.The results show that the unreacted Mg and Fe remained as MgFe_(2)O_(4),and Al formed Al_(2)Si_(2)O_(5)(OH)_(4) in the leaching residue.The kinetics of Mg and Ni in the leaching process was studied respectively.The leaching kinetics of Mg conformed to the shrinking core model with an activation energy of 16.95 kJ/mol,which was controlled by the combination of the diffusion and chemical reaction.The leaching kinetics of Ni accorded with the Avrami equation with an activation energy of 11.57 kJ/mol,which was controlled by diffusion.In the study,the valuable metal elements were extracted from serpentine minerals with high efficiency and low cost,which possessed important practical values.

Mechanochemical leaching of chalcopyrite concentrate by sulfuric acid

This study aimed to introduce a new cost-effective methodology for increasing the leaching efficiency of chalcopyrite concentrates at ambient temperature and pressure. Mechanical activation was employed during the leaching（mechanochemical leaching） of chalcopyrite concentrates in a sulfuric acid medium at room temperature and atmospheric pressure. High energy ball milling process was used during the leaching to provide the mechanochemical leaching condition, and atomic absorption spectroscopy and cyclic voltammetry were used to determine the leaching behavior of chalcopyrite. Moreover, X-ray diffraction and scanning electron microscopy were used to characterize the chalcopyrite powder before and after leaching. The results demonstrated that mechanochemical leaching was effective; the extraction of copper increased significantly and continuously. Although the leaching efficiency of chalcopyrite was very low at ambient temperature, the percentages of copper dissolved in the presence of hydrogen peroxide（H2O2） and ferric sulfate（Fe2（SO4）3） after 20 h of mechanochemical leaching reached 28% and 33%, respectively. Given the efficiency of the developed method and the facts that it does not require the use of an autoclave and can be conducted at room temperature and atmospheric pressure, it represents an economical and easy-to-use method for the leaching industry.

Agglomeration and leaching behaviors of copper oxides with different chemical binders

The chemical binder is one of the critical factors affecting ore agglomeration behavior and leaching efficiency.In this study,we in-vestigated the effect of the type of binder and mass fraction of the H_(2)SO_(4)solution used on the curing,soaking,and leaching behavior of ag-glomerations.The results revealed that Portland cement(3CaO·SiO_(2),2CaO·SiO_(2),and 3CaO·Al_(2)O_(3))was the optimal binder for obtaining a well-shaped,stable agglomeration structure.A higher extraction rate was achieved when using Portland cement than that obtained using sodi-um silicate,gypsum,or acid-proof cement.An excessive geometric mean size is not conducive to obtaining well-shaped agglomerations and desirable porosity.Using computed tomography(CT)and MATLAB,the porosity of two-dimensional CT images in sample concentrations L1-L3 was observed to increase at least 4.5vol%after acid leaching.Ore agglomerations began to be heavily destroyed and even to disinteg-rate when the sulfuric acid solution concentration was higher than 30 g/L,which was caused by the excessive accumulation of reaction products and residuals.

Sulfuric acid leaching kinetics of South African chromite

The sulfuric acid leaching kinetics of South African chromite was investigated. The negative influence of a solid product layer constituted of a silicon-rich phase and chromium-rich sulfate was eliminated by crushing the chromite and by selecting proper leaching con- ditions. The dimensionless change in specific surface area and the conversion rate of the chromite were observed to exhibit a proportional re- lationship. A modified shrinking particle model was developed to account for the change in reactive surface area, and the model was fitted to experimental data. The resulting model was observed to describe experimental findings very well. Kinetics analysis revealed that the leach- ing process is controlled by a chemical reaction under the employed experimental conditions and the activation energy of the reaction is 48 kJ.mol-1.

Preparation of titanium mineral from vanadium titanomagnetite concentrates by hydrogen reduction and acid leaching

Titanium mineral was prepared from vanadium titanomagnetite concentrates by hydrogen reduction and acid leaching.The leaching behaviors of elements like Fe,V,Mn,Al,Mg,Ca,and Si were highly related to the reduction degree.The phase compositions of the reduced materials and the leached residues were analyzed by XRD to identify the effect of reduction degree on the leaching mechanisms.The results showed that the concentrates were reduced to iron metal and titanomagnetite at 800-1000°C for 0.5 h,and the above elements of Fe and impurities were easily leached.Deeper reduction led to the formation of ilmenite and Mg-Al spinel,which hindered leaching.Mg-bearing anosovite appeared in the further reduced materials,and the leaching rates of impurities became much lower.An upgraded titanium mineral with a normalized TiO_(2) grade of 70.3%was achieved by H_(2) reduction at 850°C for 0.5 h and acid leaching,which is a satisfactory Ti resource for the preparation of titanium oxide by sulfate process.

Manganese extraction from high-iron-content manganese oxide ores by selective reduction roasting-acid leaching process using black charcoal as reductant

Reduction roasting-acid leaching process was utilized to process high-iron-content manganese oxide ore using black charcoal as reductant. The results indicate that, compared with the traditional reductant of anthracite, higher manganese extraction efficiency is achieved at lower roasting temperature and shorter residence time. The effects of roasting parameters on the leaching efficiency of Mn and Fe were studied, and the optimal parameters are determined as follows: roasting temperature is 650 °C, residence time is 40 min, and black charcoal dosage is 10%(mass fraction). Under these conditions, the leaching efficiency of Mn reaches 82.37% while that of Fe is controlled below 7%. XRD results show that a majority of MnO2 and Fe2O3 in the raw ore are reduced to MnO and Fe3O4, respectively.

Reductive leaching of indium from the neutral leaching residue using oxalic acid in sulfuric acid solution

The present study evaluates the reductive leaching of indium from indium-bearing zinc ferrite using oxalic acid as a reducer in sulfuric acid solution.The effect of main factors affecting the process rate,including the oxalic-acid-to-sulfuric-acid ratio,stirring rate,grain size,temperature,and the initial concentration of synergic acid,was precisely evaluated.The results confirmed the acceptable efficiency of dissolving indium in the presence of oxalic acid.The shrinking-core model with a chemical-reaction-controlled step can correctly describe the kinetics of indium dissolution.On the basis of an apparent activation energy of 44.55 kJ/mol and a reaction order with respect to the acid concentration of 1.14,the presence of oxalic acid was found to reduce the sensitivity to temperature changes and to increase the effect of changes in acid concentration.Finally,the equation of the kinetic model based on the factors under study is presented.

Phase, Microstructure and Beneficiation of Manganese Ore by Acid Leaching

In this research work, sawdust was used as a reducing agent for sulphuric acid leaching of manganese ore from Prang Ghar, Lower Mohmand Agency, Pakistan. X-ray diffraction of the powdered sample indicated the presence of Hausmannite (Mn3O4), Calcium Aluminum Silicate Hydrate, Silica (SiO2) and Hematite (Fe2O3). X-ray diffraction and the energy dispersive spectroscopic analysis show that the manganese ore sample was siliceous in nature. In the present study, six process parameters were investigated i.e. the particle size of the ore, leaching temperature, time duration, Mn ore amount, sulphuric acid concentration and amount of sawdust. Manganese extraction of 88.93 (wt%) was achieved for a leaching time of 60 minutes at 120°C using 5% (v/v) H2SO4 concentration for 10 g Mn ore and 5 g sawdust. The results demonstrate that sawdust is a low cost, renewable and non-hazardous reducing agent in comparison to other available reagents.

Recovery of scandium from silicate minerals by high-pressure leaching in sulfuric acid

This study investigated the leaching of scandium from a Sc-bearing silicate ore.The Sc concentrate obtained by beneficiation pre-enrichment has 1.03×10^(−4) wt%Sc and 14.66 wt%Fe.The main Sc-bearing minerals are limonite,chlorite,sericite,and hornblende,in the form of isomorphism.High-pressure leaching(HPL)with sulfuric acid(98 wt%)and NaF was used to dispose this samples.The Sc leaching efficiency of 91.82%was obtained under the optimum conditions,which are pressure of 5.0×10^(5) Pa,A/O value of 1.1,L/S value of 1.8,NaF dosage of 2 wt%,at 130℃ for 6 h.The X-ray diffraction(XRD)and scanning electron microscopy(SEM)results show that the residue is mainly quartz phase in the multihole shape.Compared with ordinary leaching for silicate,high-pressure leaching has significant advantages in saving acid and energy consumption.

Producing High Purity Nickel Metal Powder from Nickel Wastes through Acidic Leaching by Sulfuric Acid

Nickel has found increasing application in electronic,automobile manufacturing,plating,and metal industries and so on.Producing high quality metal powders to satisfy increasing demand for advanced materials is of very high importance.There are a few numbers of standard powder production techniques.An acidic leaching has been applied in present research.Sulfuric acid has been used to leach nickel wastes of plating industry.To produce nickel oxide powder furnaces with no protecting atmosphere and to produce pure nickel powder,tube furnace with hydrogen atmosphere has been applied.Variables performed in the research are time,density of sulfuric acid,and amount of hydrogen peroxide.To analyze powders produced,EDS element analysis and to determine size of powder particles,SEM has been applied.It was shown by the results that the highest amount of nickel dissolution in sulfuric acid(98%)has taken place during one hour and there is a direct relationship between hydrogen peroxide amount and nickel dissolution in sulfuric acid.

Reductive acid leaching of cadmium from zinc neutral leaching residue using hydrazine sulfate

Zinc neutral leaching residue（ZNLR） from hydrometallurgical zinc smelting processing can be determined as hazardous intermediate containing considerable amounts of Cd and Zn which have great threats to the environment. The ZNLR contained approximately 35.99% Zn, 15.93% Fe and 0.26% Cd, and Cd mainly existed as ferrites in the ZNLR in this research. Reductive acid leaching of ZNLR was investigated. The effects of hydrazine sulfate concentration, initial sulfuric acid concentration, temperature, duration and liquid-to-solid ratio on the extraction of Cd, Zn and Fe were examined. The extraction efficiencies of Cd, Zn and Fe reached 90.81%, 95.83% and 94.19%, respectively when the leaching parameters were fixed as follows： hydrazine sulfate concentration, 33.3 g/L; sulfuric acid concentration, 80 g/L; temperature, 95 °C; duration of leaching, 120 min; liquid-to-solid ratio, 10 m L/g and agitation, 400 r/min. XRD and SEM-EDS analyses of the leaching residue confirmed that lead sulfate（Pb SO4） and hydrazinium zinc sulfate（（N2H5）2Zn（SO4）2） were the main phases remaining in the reductive leaching residue.