气象观测场在汽车试验场中的应用研究

汽车试验场作为汽车开展道路测试的重要场所,用于验证汽车产品的品质以及可靠性。除了场地道路外,气象条件作为汽车道路测试的重要一环,在《GB/T12534-1990汽车道路试验方法通则》中也有明确要求,如:试验时应是无雨无雾天气,相对湿度小于95%,气温0-40℃,风速不大于3m/s。同时气象条件也作为试验场道路管控的重要依据,实时风速、雨量、能见度等信息为场地管理者发布限速、限行、封场等通知提供必要参考依据,直接影响道路测试安全管控的及时性。因此,文章从气象观测场的建设、气象服务、异常天气道路管控等方面开展气象观测场在汽车试验场中的应用研究。

西藏交通警察道路执法工作的风险与防范

西藏自治区自然、地理与气候环境复杂且特殊,道路交通环境相对恶劣,这导致当地交通警察道路执法工作面临诸多风险,包括警员人身安全和执法效能等风险。对此,文章对西藏交通警察道路执法工作风险进行了调查分析,从地区环境、警员安全意识与技能、执法装备、社会宣传和教育等角度探讨了相关风险的成因,针对性相关风险成因,提出从优化警力配置与道路信息推送、加强警员培训、完善警务装备、加强法治化宣传教育等工作来消除相关风险,以期保障警员安全并改善西藏交通环境。

EXACT SOLUTION FOR RECTANGULAR SLAB WITH THREE EDGES SIMPLY-SUPPORTED AND OTHER FREE

In this paper,we give all-sided pastic analysis of the rectangular slab with three edges simply-supported and other free.Here we discuss the following four cases:(1)The uniformly distributedload over the area a slab.(2).A concentrated load act at midpoint of free edges slab.(3)A concen-trated load act at the center a slab.(4)The line load act along free edge of slab.

Oxidation Kinetics of Aluminum Powders in a Gas Fluidized Bed Reactor in the Potential Application of Surge Arresting Materials

In this technical paper, the oxidation mechanism and kinetics of aluminum powders are discussed in great details. The potential applications of spherical aluminum powders after oxidation to be part of the surging arresting materials are discussed. Theoretical calculations of oxidation of spherical aluminum powders in a typical gas fluidization bed are demonstrated. Computer software written by the author is used to carry out the basic calculations of important parameters of a gas fluidization bed at different temperatures. A mathematical model of the dynamic system in a gas fluidization bed is developed and the analytical solution is obtained. The mathematical model can be used to estimate aluminum oxide thickness at a defined temperature. The mathematical model created in this study is evaluated and confirmed consistently with the experimental results on a gas fluidization bed. Detail technical discussion of the oxidation mechanism of aluminum is carried out. The mathematical deviations of the mathematical modeling have demonstrated in great details. This mathematical model developed in this study and validated with experimental results can bring a great value for the quantitative analysis of a gas fluidization bed in general from a theoretical point of view. It can be applied for the oxidation not only for aluminum spherical powders, but also for other spherical metal powders. The mathematical model developed can further enhance the applications of gas fluidization technology. In addition to the development of mathematical modeling of a gas fluidization bed reactor, the formation of oxide film through diffusion on both planar and spherical aluminum surfaces is analyzed through a thorough mathematical deviation using diffusion theory and Laplace transformation. The dominant defects and their impact to oxidation of aluminum are also discussed in detail. The well-controlled oxidation film on spherical metal powders such as aluminum and other metal spherical powders can potentially become an important part of switch devices of surge arresting materials, in general.

Immunophenotypic signature of primary glioblastoma multiforme: A case of extended progression free survival

Glioblastoma-multiforme(GBM), the most aggressive glial tumor, has a worldwide age-adjusted incidence ranging from 0.59-3.69/100000 persons. Despite current multimodal-treatment approach, median-survival time and progression-free survival(PFS) remains short. Glioblastomas display a variety of molecular alterations, which necessitates determining which of these have a prognostic significance. This is a case of a 45-yearold patient who presented with progressive slurring of speech and features of raised intracranial pressure. Computed tomography(CT) scan revealed a large heterogeneously enhancing lesion in the left front-temporalperisylvian region with solid, cystic areas, suggestive of malignant glioma. Partial tumor-excision was followed by concurrent chemo-radiotherapy. Histopathologically, the tumor was astrocytoma grade-IV. Patient had an extended PFS of 12 mo, with an overall survival of 26 mo. Primary-GBM was confirmed using molecular markers and the immunophenotypic signature was defined by evaluating systemic expression of human telomerase reverse transcriptase, interleukin-6, neutrophil-lymphocyte ratio, tissue inhibitor of metalloproteinases-1, human chitinase-3-like-protein-1(YKL-40) and high mobility group-A1. Current findings suggest that this signature can identify worst outcomes, independent of clinical criteria.

Failure Modes of Lead Free Solder Bumps Formed by Induction Spontaneous Heating Reflow

The shear failure modes and respective failure mechanism of Sn3.5Ag and Sn3.0Ag0.5Cu lead-free solder bumping on Au/Ni/Cu metallization formed by induction spontaneous heating reflow process have been investigated through the shear test after aging at 120℃ for 0, 1, 4, 9 and 16 d. Different typical shear failure behaviors have been found in the loading curves （shear force vs displacement）. From the results of interracial morphology analysis of the fracture surfaces and cross-sections, two main typical failure modes have been identified. The probabilities of the failure modes occurrence are inconsistent when the joints were aged for different times. The evolution of the brittle NiaSn4 and Cu-Ni-Au-Sn layers and the grains coarsening of the solder bulk are the basic reasons for the change of shear failure modes.

Influences of Ag and Au Additions on Structure and Tensile Strength of Sn-5Sb Lead Free Solder Alloy

It is important, for electronic application, to decrease the melting point of Sn-5Sb solder alloy because it is relatively high as compared with the most popular eutectic Pb-Sn solder alloy. Adding Au or Ag can decrease the onset melting temperature （233℃） of this alloy to 203,5℃ and 216℃, respectively. The results indicate that the Sn-5Sb-i.5Au alloy has very good ultimate tensile strength （UTS）, ductility, and fusion heat, which are better than both those of the Sn-5Sb-3.SAg and Sn-5Sb alloys. The formation of intermetallic compounds （IMCs） AuSn4 and Ag3Sn enhanced the SbSn precipitates in the solidification microstructure microstructure stability, while retained the formation of thus significantly improved the strength and ductility For all alloys, both UTS and yield stress （σy） increase with increasing strain rate and decrease with increasing temperature in tensile tests, but changes of ductility are generally small with inconsistent trends.

Thermodynamic Equilibrium of the Saturated Fluid with a Free Surface Area and the Internal Energy as a Function of the Phase-Specific Volumes and Vapor Pressure

This study is concerned with describing the thermodynamic equilibrium of the saturated fluid with and without a free surface area A. Discussion of the role of A as system variable of the interface phase and an estimate of the ratio of the respective free energies of systems with and without A show that the system variables given by Gibbs suffice to describe the volumetric properties of the fluid. The well-known Gibbsian expressions for the internal energies of the two-phase fluid, namely for the vapor and for the condensate (liquid or solid), only differ with respect to the phase-specific volumes and . The saturation temperature T, vapor presssure p, and chemical potential are intensive parameters, each of which has the same value everywhere within the fluid, and hence are phase-independent quantities. If one succeeds in representing as a function of and , then the internal energies can also be described by expressions that only differ from one another with respect to their dependence on and . Here it is shown that can be uniquely expressed by the volume function . Therefore, the internal energies can be represented explicitly as functions of the vapor pressure and volumes of the saturated vapor and condensate and are absolutely determined. The hitherto existing problem of applied thermodynamics, calculating the internal energy from the measurable quantities T, p, , and , is thus solved. The same method applies to the calculation of the entropy, chemical potential, and heat capacity.

An Inquiry into the Approach to Asian Regional Trade Integration Under the Belt and Road Initiative——The Case of the Alignment of a China-Japan-South Korea Free Trade Area

It has been five years since the Belt and Road Initiative (BRI) was first introduced. Though there has been a growing body of literature on regional cooperation between covered countries, Japan and South Korea have been barely discussed. This paper starts with the consensus-based mechanism of a China-Japan-South Korea Free Trade Area (FTA) to probe the approach of its alignment with the BRI in terms of the sequence of “master plans,”“viability of cooperation,” and “embedding of rules.” This inquiry found that the three countries have a shared interest in cooperation in Central Asia to which China prefers a pragmatic approach, while Japan and South Korea an approach combining idealism with pragmatism. Given the huge potential of cooperation between the trio, it is suggested that a “Central Asia chapter” be incorporated in the negotiation framework of this trilateral FTA, and that the design feature three aspects;fundamental principles, specific rules, and an executive body with a view to functionally contributing to regional trade integration in Asia. This approach may also be applied to the alignment of other Asian areas with the BRI.

Chrysophanol attenuates lead exposure-induced injury to hippocampal neurons in neonatal mice

Previous studies have shown that chrysophanol protects against learning and memory impairments in lead-exposed adult mice. In the present study, we investigated whether chrysophanol can alleviate learning and memory dysfunction and hippocampal neuronal injury in lead-exposed neonatal mice. At the end of lactation, chrysophanol（0.1, 1.0, 10.0 mg/kg） was administered to the neonatal mice by intraperitoneal injection for 15 days. Chrysophanol significantly alleviated injury to hippocampal neurons and improved learning and memory abilities in the lead-poisoned neonatal mice. Chrysophanol also significantly decreased lead content in blood, brain, heart, spleen, liver and kidney in the lead-exposed neonatal mice. The levels of malondialdehyde in the brain, liver and kidney were significantly reduced, and superoxide dismutase and glutathione peroxidase activities were significantly increased after chrysophanol treatment. Collectively, these findings indicate that chrysophanol can significantly reduce damage to hippocampal neurons in lead-exposed neonatal mice.

基于组增长的小世界Scale-free网络模型

小世界和Scale-free是很多大规模复杂网络的重要特征,建立体现这些特征的网络模型是研究网络结构和行为的重要基础。针对现有模型不能全面地反映实际网络所具有的特征属性,提出了基于组增长的小世界 Scale-free网络模型。该模型在小世界和 Scale-free模型的基础上,结合了节点的本地强连接性、新增连接的度相关性和网络动态的增长方式,把小世界和 Scale-free联系了起来。仿真结果表明,该模型生成的网络图同时具有小世界和 Scale-free特征。

慢性氟中毒大鼠肾脏自由基含量与形态学变化

目的研究慢性氟中毒大鼠肾脏自由基含量与形态学变化的关系。方法Wistar大鼠随机分为三组。正常对照组,未作任何处理;染氟组,自由饮用含氟化钠132.6mg/L的含氟水;抗氧化中药—染氟组,自由饮用含氟化钠132.6mg/L的含氟水,同时每日经腹腔内注射抗氧化中药丹参绞股蓝复方3.125毫克/公斤/天,实验6个月时检查动物。用电子自旋共振的方法检测肾组织内自由基的含量,并观察肾脏的形态学变化。结果与正常对照组动物相比,染氟组自由基明显升高,电镜下见肾小管上皮细胞有巨大线粒体及髓鞘样结构形成,内质网扩张,粗面内质网上核糖体脱落,细胞浆内游离核糖体增加,胞核内异染色质有向核膜下聚集的趋势;光镜下呈颗粒性变,偶见坏死。抗氧化中药一染氟组肾组织中自由基含量不增高,光镜及电镜下均未见明显病变。结论慢性氟中毒时肾脏病变与自由基含量增多有密切关系。

Effects of Ni-Doping on Microstructures and Properties of Zn-20Sn High-Temperature Lead-Free Solders

In the present work, the effect of Ni doping on the microstructures and properties of Zn-20 Sn high temperature lead-free solder has been investigated. Interestingly,Ni was present as the form of Ni-Zn compounds in the microstructure of Zn-20 Sn-xNi alloy.When the Ni-doping amount was 0.2~0.4 wt.%, the presence of δ phase was found, and when the doping amoun was 0.8 wt.%, the presence of γ phase was observed. With the increase of Ni content, the liquidus temperature increased but the solidus temperature did not change obviously. In addition, the microhardness and electrical resistivities of Zn-20 Sn-xNi solder increased gradually. And the spreading area and shear strength increased firstly but decreased afterwards. When the content of Ni was 0.4 wt.%, the spreading area and shear strength of solder reached to be maximum. After the addition of 0.4 wt.% Ni, the microstructure of the interfacial intermetallic compound(IMC) layer of the interface didn't change, but the total thickness of the IMC layer reduced. The δ-phase was embedded in the grain boundary of ε-Cu Zn5, which hindered the diffusion of atoms. The thickness of IMC layer at the interface reduced, which led to the improvement of the shear strength of the interface.

糖尿病大鼠心肌损伤的观察及机制初探

目的:探讨不同病程、不同血糖浓度对糖尿病(diabetesmellitus,DM)大鼠的心肌损伤及其机制。方法:SD大鼠64只,随机分为2组:对照组(NC组)32只,实验组(DM组)32只。DM组腹腔注射链脲佐菌素(streptozotocin,STZ)55mg/kg诱发DM模型。实验组和对照组又随机分为4组,每组8只。分别观察病程2周、4周、6周、8周大鼠心功能及心肌组织生化指标的变化。另取SD大鼠40只,随机分出8只作为对照组(NC),其余用上述方法造模,并按最后一次血糖浓度分为3组:16.7～21.6mmol/L(DM1组),21.7～26.6mmol/L(DM2组),26.7mmol/L以上(DM3组)。比较各组大鼠心功能及心肌组织生化指标的变化。结果:与NC组比,DM大鼠第4周心肌LVEDP、-dp/dtmax、MDA含量,第6周除CK外各项指标、第8周心肌各项指标差异均有显著性(P<0.01～0.05)。不同血糖浓度DM大鼠各项指标与NC组差异均有显著性(P<0.01～0.05)。与DM1组比,DM2组LVEDP、-dp/dtmax、t-dp/dt、CK、SOD、MDA差异均有显著性(P<0.01～0.05),DM3组各项指标除LDH外差异均有显著性(P<0.01～0.05);与DM2组比,DM3组LVSP、LVEDP、+dp/dtmax、SOD差异有显著性(P<0.01～0.05)。结论:DM大鼠从第4周开始出现心肌舒张受限,第6周开始出现心肌收缩障碍,心肌组织酶明显改变,随病程延长、血糖浓度升高而逐渐加重。

Leading-edge receptivity of boundary layer to three-dimensional free-stream turbulence

The laminar-turbulent transition has always been a hot topic of fluid mechanics. Receptivity is the initial stage and plays a crucial role in the entire transition process. The previous studies of receptivity focus on external disturbances such as sound waves and vortices in the free stream, whereas those on the leading-edge receptivity to the three-dimensional free-stream turbulence (FST), which is more general in the nature, are rarely reported. In consideration of this, this work is devoted to investigating the receptivity process of three-dimensional Tollmien-Schlichting (T-S) wave packets excited by the three-dimensional FST in a flat-plate boundary layer numerically. The relations between the leading-edge receptivity and the turbulence intensity are established, and the influence of the FST directions on the propagation directions and group velocities of the excited T-S wave packets is studied. Moreover, the leading-edge receptivity to the anisotropic FST is also studied. This parametric investigation can contribute to the prediction of laminar-turbulent transition.

Overexpression of heme oxygenase-1 protects smooth muscle cells against oxidative injury and inhibits cell proliferation

To investigate whether the expression of exogenous heme oxygenase-1 (HO-1) gene within vascular smooth muscle cells (VSMC) could protect the cells from free radical attack and inhibit cell proliferation, we established an in vitro transfection of human HO-1 gene into rat VSMC mediated by a retroviral vector. The results showed that the profound expression of HO-1 protein as well as HO activity was 1.8- and 2.0-fold increased respectively in the transfected cells compared to the non-transfected ones. The treatment of VSMC with different concentrations of H2O2 led to the remarkable cell damage as indicated by survival rate and LDH leakage. However, the resistance of the HO-1 transfected VSMC against H2O2 was significantly raised. This protective effect was dramatically diminished when the transfected VSMC were pretreated with ZnPP-IX, a specific inhibitor of HO, for 24 h. In addition, we found that the growth potential of the transfected cells was significantly inhibited directly by increased activity of HO-1, and this effect might be related to decreased phosphorylation of MAPK. These results suggest that the overexpression of introduced hHO-1 is potentially able to reduce the risk factors of atherosclerosis, partially due to its cellular protection against oxidative injury and to its inhibitory effect on cellular proliferation.

Element Free Gelerkin Method for 2-D Potential Problems

A meshfree method namely, element free Gelerkin (EFG) method, is presented in this paper for the solution of governing equations of 2-D potential problems. The EFG method is a numerical method which uses nodal points in order to discretize the computational domain, but where the use of connectivity is absent. The unknowns in the problems are approximated by means of connectivity-free technique known as moving least squares (MLS) approximation. The effect of irregular distribution of nodal points on the accuracy of the EFG method is the main goal of this paper as a complement to the precedent researches investigated by proposing an irregularity index (II) in order to analyze some 2-D benchmark examples and the results of sensitivity analysis on the parameters of the method are presented.

Wide-Area Delay-Dependent Adaptive Supervisory Control of Multi-machine Power System Based on Improve Free Weighting Matrix Approach

The paper demonstrates the possibility to enhance the damping of inter-area oscillations using Wide Area Measurement (WAM) based adaptive supervisory controller (ASC) which considers the wide-area signal transmission delays. The paper uses an LMI-based iterative nonlinear optimization algorithm to establish a method of designing state-feedback controllers for power systems with a time-varying delay. This method is based on the delay-dependent stabilization conditions obtained by the improved free weighting matrix (IFWM) approach. In the stabilization conditions, the upper bound of feedback signal’s transmission delays is taken into consideration. Combining theoriesof state feedback control and state observer, the ASC is designed and time-delay output feedback robust controller is realized for power system. The ASC uses the input information from Phase Measurement Units (PMUs) in the system and dispatches supplementary control signals to the available local controllers. The design of the ASC is explained in detail and its performance validated by time domain simulations on a New England test power system (NETPS).

The Next Era:Flourish of National Health Care & Medicine with the World Leading Artificial Intelligence

MODERN medical diagnosis and practice heavily rely on biological data and information from patients’ body.The progress of biomedical sensor,material and mathematical technology provided ever-increasing methods to gather data.While providing more choices and more comprehensive picture of patients’ conditions to doctors and practitioners,these progresses also require more labor efforts to read,analyze,and make decisions based on those data.It is very difficult for the medical human resources to grow at a speed that matches such need for diagnosis-related expert knowledge.The shortage of expertise has caused long waiting time for check report and fatal misjudged diagnosis in public health system,and it will compromise our ability to move towards a more precise,more personalized and more efficient future of medicine.