The tensile properties of Sn-9Zn-xAg-ySb;{(x, y) = (0.2, 0.6), (0.2, 0.8), (0.6, 0.2), (0.8, 0.2)} lead-free solders were investigated. All the test samples were annealed at 150°C for 1 hour. The tests are carrie...The tensile properties of Sn-9Zn-xAg-ySb;{(x, y) = (0.2, 0.6), (0.2, 0.8), (0.6, 0.2), (0.8, 0.2)} lead-free solders were investigated. All the test samples were annealed at 150°C for 1 hour. The tests are carried out at room temperature at the strain rate of 4.17 × 10<sup>-3</sup> s<sup>-1</sup>, 20.85 × 10<sup>-3</sup> s<sup>-1</sup>, and 208.5 × 10<sup>-3</sup> s<sup>-1</sup>. It is seen that the tensile strength increases and the ductility decrease with increasing the strain rate over the investigated range. From the strain rate change test results, the strain sensitivity values are found in the range of 0.0831 to 0.1455 due to the addition of different alloying elements.展开更多
Although there are many lead-free soldering alloys on the market, none of them have ideal qualities. The researchers are combining binary alloys with a variety of additional materials to create the soldering alloys’ ...Although there are many lead-free soldering alloys on the market, none of them have ideal qualities. The researchers are combining binary alloys with a variety of additional materials to create the soldering alloys’ features. The eutectic Sn-9Zn alloy is among them. This paper investigated the mechanical and electrical properties of Sn-9Zn-x (Ag, Cu, Sb);{x = 0.2, 0.4, and 0.6} lead-free solder alloys. The mechanical properties such as elastic modulus, ultimate tensile strength (UTS), yield strength (YS), and ductility were examined at the strain rates in a range from 4.17 10−3 s−1 to 208.5 10−3 s−1 at room temperature. It is found that increasing the content of the alloying elements and strain rate increases the elastic modulus, ultimate tensile strength, and yield strength while the ductility decreases. The electrical conductivity of the alloys is found to be a little smaller than that of the Sn-9Zn eutectic alloy.展开更多
The rules on industrial flow of lead were studied for theoretical foundation of nonrenewable resource conservation and environmental improvement. A model of lead flow in lead product life cycle was developed through l...The rules on industrial flow of lead were studied for theoretical foundation of nonrenewable resource conservation and environmental improvement. A model of lead flow in lead product life cycle was developed through lead flow analysis and was used to analyze the relationship between lead product system and its environment, thus the rules on industrial flow of lead were obtained. The results show that increasing eco-efficiency will favor both resource conservation and environmental improvement. Several indices were proposed to evaluate the lead flow. As for application, the lead-flow for China in 1999 was analyzed and the reasons for low eco-efficiency were identified. In the end, some countermeasures were proposed to improve eco-efficiency, and the future lead ore consumption and environment quality were forecasted.展开更多
The program described herein （LEADAT） serves to calculate sediment date and sedimentation rate using the ^210pb method for the studies of environmental processes and pollution history on a time scale of 100 - 150 a....The program described herein （LEADAT） serves to calculate sediment date and sedimentation rate using the ^210pb method for the studies of environmental processes and pollution history on a time scale of 100 - 150 a. The program written in MATLAB （ Version7.0） permits the user to select the principal models of ^210pb method, i. e. , the constant fluxes of sediment and lead-210 （ CF- SL） model, the constant flux of lead-210 （CFL） model, the constant initial concentration of lead-210 （CICL） model and the twolayer mixing （TLM） model. Although appropriate model selection is essentially based on understanding of the sedimentary processes, the pattern of the excess ^210pb profile is also helpful for model selection. The excess ^210pb profiles for two sediment cores collected from a brackish lake and an embayment respectively are used to demonstrate the application of the program. With a graphical user interface, the program can be easily executed. Not only ASCII but also graphical output can be generated by means of the program. Meanwhile, the code can be modified easily for extension.展开更多
A process with potentially reduced environmental impacts and occupational hazards of lead-bearing zinc plant residue was studied to achieve a higher recovery of lead via a cost-effective and environmentally friendly p...A process with potentially reduced environmental impacts and occupational hazards of lead-bearing zinc plant residue was studied to achieve a higher recovery of lead via a cost-effective and environmentally friendly process. This paper describes an optimization study on the leaching of lead from zinc leach residue using acidic calcium chloride aqueous solution. Six main process conditions, i.e., the solution pH value, stirring rate, concentration of CaC12 aqueous solution, liquid-to-solid （L/S） ratio, leaching temperature, and leaching time, were inves- tigated. The microstructure and components of the residue and tailing were characterized using scanning electron microscopy （SEM） and X-ray diffraction （XRD）. On the basis of experimental results, the optimum reaction conditions were determined to be a solution pH value of 1, a stirring rate of 500 r·min-1, a CaC12 aqueous solution concentration of 400 g·L-1, a liquid-to-solid mass ratio of 7：1, a leaching tempera- ture of 80℃, and a leaching time of 45 min. The leaching rate of lead under these conditions reached 93.79%, with an iron dissolution rate of 19.28%. Silica did not take part in the chemical reaction during the leaching process and was accumulated in the residue.展开更多
文摘The tensile properties of Sn-9Zn-xAg-ySb;{(x, y) = (0.2, 0.6), (0.2, 0.8), (0.6, 0.2), (0.8, 0.2)} lead-free solders were investigated. All the test samples were annealed at 150°C for 1 hour. The tests are carried out at room temperature at the strain rate of 4.17 × 10<sup>-3</sup> s<sup>-1</sup>, 20.85 × 10<sup>-3</sup> s<sup>-1</sup>, and 208.5 × 10<sup>-3</sup> s<sup>-1</sup>. It is seen that the tensile strength increases and the ductility decrease with increasing the strain rate over the investigated range. From the strain rate change test results, the strain sensitivity values are found in the range of 0.0831 to 0.1455 due to the addition of different alloying elements.
文摘Although there are many lead-free soldering alloys on the market, none of them have ideal qualities. The researchers are combining binary alloys with a variety of additional materials to create the soldering alloys’ features. The eutectic Sn-9Zn alloy is among them. This paper investigated the mechanical and electrical properties of Sn-9Zn-x (Ag, Cu, Sb);{x = 0.2, 0.4, and 0.6} lead-free solder alloys. The mechanical properties such as elastic modulus, ultimate tensile strength (UTS), yield strength (YS), and ductility were examined at the strain rates in a range from 4.17 10−3 s−1 to 208.5 10−3 s−1 at room temperature. It is found that increasing the content of the alloying elements and strain rate increases the elastic modulus, ultimate tensile strength, and yield strength while the ductility decreases. The electrical conductivity of the alloys is found to be a little smaller than that of the Sn-9Zn eutectic alloy.
基金Project(2005CB724204) supported by the Major State Basic Research Development Program of China
文摘The rules on industrial flow of lead were studied for theoretical foundation of nonrenewable resource conservation and environmental improvement. A model of lead flow in lead product life cycle was developed through lead flow analysis and was used to analyze the relationship between lead product system and its environment, thus the rules on industrial flow of lead were obtained. The results show that increasing eco-efficiency will favor both resource conservation and environmental improvement. Several indices were proposed to evaluate the lead flow. As for application, the lead-flow for China in 1999 was analyzed and the reasons for low eco-efficiency were identified. In the end, some countermeasures were proposed to improve eco-efficiency, and the future lead ore consumption and environment quality were forecasted.
文摘The program described herein （LEADAT） serves to calculate sediment date and sedimentation rate using the ^210pb method for the studies of environmental processes and pollution history on a time scale of 100 - 150 a. The program written in MATLAB （ Version7.0） permits the user to select the principal models of ^210pb method, i. e. , the constant fluxes of sediment and lead-210 （ CF- SL） model, the constant flux of lead-210 （CFL） model, the constant initial concentration of lead-210 （CICL） model and the twolayer mixing （TLM） model. Although appropriate model selection is essentially based on understanding of the sedimentary processes, the pattern of the excess ^210pb profile is also helpful for model selection. The excess ^210pb profiles for two sediment cores collected from a brackish lake and an embayment respectively are used to demonstrate the application of the program. With a graphical user interface, the program can be easily executed. Not only ASCII but also graphical output can be generated by means of the program. Meanwhile, the code can be modified easily for extension.
基金the Research Fund for the Doctoral Program of Higher Education, China (No. 20110042120014)the Project Supported by National Natural Science Foundation of China (Nos. 51204036 and 51234009)the National Basic Research of Program of China (No. 2014CB643405)
文摘A process with potentially reduced environmental impacts and occupational hazards of lead-bearing zinc plant residue was studied to achieve a higher recovery of lead via a cost-effective and environmentally friendly process. This paper describes an optimization study on the leaching of lead from zinc leach residue using acidic calcium chloride aqueous solution. Six main process conditions, i.e., the solution pH value, stirring rate, concentration of CaC12 aqueous solution, liquid-to-solid （L/S） ratio, leaching temperature, and leaching time, were inves- tigated. The microstructure and components of the residue and tailing were characterized using scanning electron microscopy （SEM） and X-ray diffraction （XRD）. On the basis of experimental results, the optimum reaction conditions were determined to be a solution pH value of 1, a stirring rate of 500 r·min-1, a CaC12 aqueous solution concentration of 400 g·L-1, a liquid-to-solid mass ratio of 7：1, a leaching tempera- ture of 80℃, and a leaching time of 45 min. The leaching rate of lead under these conditions reached 93.79%, with an iron dissolution rate of 19.28%. Silica did not take part in the chemical reaction during the leaching process and was accumulated in the residue.
