High-resolution neutronics model for ^(238)Pu production in high-flux reactors

We proposed and compared three methods(filter burnup,single energy burnup,and burnup extremum analysis)to build a high-resolution neutronics model for 238Pu production in high-flux reactors.The filter burnup and single energy burnup methods have no theoretical approximation and can achieve a spectrum resolution of up to~1 eV,thereby constructing the importance curve and yield curve of the full energy range.The burnup extreme analysis method combines the importance and yield curves to consider the influence of irradiation time on production efficiency,thereby constructing extreme curves.The three curves,which quantify the transmutation rate of the nuclei in each energy region,are of physical significance because they have similar distributions.A high-resolution neutronics model for ^(238)Pu production was established based on these three curves,and its universality and feasibility were proven.The neutronics model can guide the neutron spectrum optimization and improve the yield of ^(238)Pu by up to 18.81%.The neutronics model revealed the law of nuclei transmutation in all energy regions with high spectrum resolution,thus providing theoretical support for high-flux reactor design and irradiation production of ^(238)Pu.

Nanotechnology in Nuclear Reactors: Innovations in Fusion and Fission Power Generation

This article explores the transformative potential of nanotechnology and MMs(memory metals)in enhancing the design and operation of nuclear reactors,encompassing both fission and fusion technologies.Nanotechnology,with its ability to engineer materials at the atomic scale,offers significant improvements in reactor safety,efficiency,and longevity.In fission reactors,nanomaterials enhance fuel rod integrity,optimize thermal management,and improve in-core instrumentation.Fusion reactors benefit from nanostructured materials that bolster containment and heat dissipation,addressing critical challenges in sustaining fusion reactions.The integration of SMAs(shape memory alloys),or MMs,further amplifies these advancements.These materials,characterized by their ability to revert to a pre-defined shape under thermal conditions,provide self-healing capabilities,adaptive structural components,and enhanced magnetic confinement.The synergy between nanotechnology and MMs represents a paradigm shift in nuclear reactor technology,promising a future of cleaner,more efficient,and safer nuclear energy production.This innovative approach positions the nuclear industry to meet the growing global energy demand while addressing environmental and safety concerns.

An innovative approach to effective breeding blanket design for future fusion reactors

An effective breeding blanket is critical to support tritium self-sufficiency for future fusion reactors.The difficulty is to achieve tritium breeding ratio(TBR)target of 1.05 or more.This paper presents a new design approach to the blanket design process.It indicates that fusion blanket design is affected by universal functions based on iterations.Three aspects are worth more attention from fusion engineers in the future.The first factor is that the iterations on the material fractions affect not only structure scheme but also TBR variation.The second factor is the cooling condition affecting final TBR due to the change of the structure material proportion.The third factor is temperature field related to the tritium release.In particular,it is suggested that the statistical calculation of effective TBR must be under reasonable control of the blanket temperature field.This approach is novel for blanket engineering in development of a fusion reactor.

Lead-Bismuth and Lead as Coolants for Fast Reactors

Fast reactors used lead-bismuth eutectic (LBE) and lead as coolants possess very high level of inherent self-protection and passive safety against severe accident. So, population radiophobia can be overcome. That type of reactors can be simultaneously more safely and more cheaply. As all other coolants, LBE and lead coolant (LC) possess the certain virtues and shortcomings. The presented report includes the comparative analysis of characteristic properties of those coolants, their impact on reactor safety, reliability and operating characteristics. The conclusion is made about promising usage of FRs with these coolants in future NP after the experience in operating of the prototypes of such reactors has been obtained.

Engineering and Physical Bases of Development and Creation of Plasmochemical Reactors for Mobile Facilities for Medical Waste Disposal

This paper presents the results of the development and creation of plasma-chemical reactors for mobile and stationary installations for the destruction and disposal of solid, liquid, gaseous and mixed medical waste based on the domestic plasma generator PUN-1, with air as the plasma-forming gas. The design and principle of operation of plasma-chemical reactors installed on mobile experimental and industrial plants “Plazmon-1,2,3”, as well as the main features of the plasma waste disposal process are described.

Comparison of Fe^(2+) oxidation by Acidithiobacillus ferrooxidans in rotating-drum and stirred-tank reactors

Fe2＋ oxidation by Acidithiobacillus ferrooxidans（At.ferrooxidans） under different solid contents by adding inert Al2O3 powder was examined in rotating-drum and stirred-tank reactors.The results show that the bioactivity of At.ferrooxidans in the stirred-tank is higher than that in the rotating-drum in the absence of Al2O3 powder,but the biooxidation rate of Fe2＋ decreases markedly from 0.23 g/（L·h） to 0.025 g/（L·h） with increasing the content of Al2O3 powder from 0 to 50%（mass fraction） in the stirred-tank probably due to the deactivation of At.ferrooxidans resulting from the collision and friction of solid particles.The increase in Al2O3 content has a little adverse effect on the bioactivity of At.ferrooxidans in the rotating-drum due to different mixing mechanisms of the two reactors.The biooxidation rate of Fe2＋ in the rotating-drum is higher than that in the stirred-tank at the same content of Al2O3 powder,especially at high solid content.The higher bioactivity of At.ferrooxidans can be maintained for allowing high solid content in the rotating-drum reactor,but its application potential still needs to be verified further by the sulfide bioleaching for the property differences of Al2O3 powder and sulfide minerals.

Control of fermentation types in continuous-flow acidogenic reactors:effects of pH and redox potential

The experiments were carried out in continuous flow acidogenic reactors with molasses used as substrate to study the effects of pH and redox potential on fermentation types. The conditions for each fermentation type were investigated at different experimental stages of start up, pH regulating and redox potential regulating. The experiments confirmed that butyric acid type fermentation would occur at pH > 6, the propionic acid type fermentation at pH about 5.5 with E h> -278 mV, and the ethanol type fermentation at pH < 4.5. A higher redox potential will lead to propionic acid type fermentation because propionogens are facultative anaerobic bacteria.

Production of single-walled carbon nanotubes from methane over Co-Mo/MgO nanocatalyst:A comparative study of fixed and fluidized bed reactors

In this study,the performances of fixed and fluidized bed reactors in the production of single-walled carbon nanotubes（SWNTs）have been investigated.In both reactors,single-walled carbon nanotubes were grown by catalytic chemical vapor decomposition（CCVD）of methane over Co-Mo/MgO nanocatalyst under two different operating conditions.The synthesized samples were characterized by TEM,TGA and Raman spectroscopy.It is found that the performance of a fluidized bed in the synthesis of carbon nanotubes is much better than that of a fixed bed.The quality of carbon nanotubes obtained from the fluidized bed was significantly higher than that from the fixed bed and the former one with the ID/IG ratio of 0.11 while the latter one with the ID/IG ratio of 0.71.Also,the yield of SWNTs in the fluidized bed was 92 wt%,while it was 78 wt%in the fixed bed.These advantages of fluidized bed reactors for the synthesis of carbon nanotubes can be attributed to more available space for the growth of carbon nanotubes and more uniform temperature and concentration profiles.

Neutronic analysis of silicon carbide cladding accident-tolerant fuel assemblies in pressurized water reactors

In resonance with the Fukushima Daiichi Nuclear Power Plant accident lesson, a novel fuel design to enhance safety regarding severe accident scenarios has become increasingly appreciated in the nuclear power industry. This research focuses on analysis of the neutronic properties of a silicon carbide(SiC) cladding fuel assembly, which provides a greater safety margin as a type of accident-tolerant fuel for pressurized water reactors. The general physical performance of SiC cladding is explored to ascertain its neutronic performance. The neutron spectrum, accumulation of ^(239)Pu, physical characteristics,temperature reactivity coefficient, and power distribution are analyzed. Furthermore, the influences of a burnable poison rod and enrichment are explored. SiC cladding assemblies show a softer neutron spectrum and flatter power distribution than conventional Zr alloy cladding fuel assemblies. Lower enrichment fuel is required when SiC cladding is adopted. However, the positive reactivity coefficient associated with the SiC material remains to be offset. The results reveal that SiC cladding assemblies show broad agreement with the neutronic performance of conventional Zr alloy cladding fuel. In the meantime, its unique physical characteristics can lead to improved safety and economy.

Recent studies on potential accident-tolerant fuel-cladding systems in light water reactors

Accident-tolerant fuel(ATF)has attracted considerable research attention since the 2011 Fukushima nuclear disaster.To improve the accident tolerance of the fuel-cladding systems in the current light-water reactors,it is proposed to develop and deploy(1)an enhanced Zrbased alloy or coated zircaloy for the fuel cladding,(2)alternative cladding materials with better accident tolerance,and(3)alternative fuels with enhanced accident tolerance and/or a higher U density.This review presents the features of the current UO2-zircaloy system.Different techniques and characters to develop coating materials and enhanced Zr-based alloys are summarized.The features of several selected alternative fuels and cladding materials are reviewed and discussed.The neutronic evaluations of alternative fuel-cladding systems are analyzed.It is expected that one or more types of ATF-cladding systems discussed in the present review will be implemented in commercial reactors.

HYDRODYNAMIC STUDIES ON LOOP REACTORS (Ⅱ) AIRLIFT LOOP REACTORS

Hydrodynamics of airlift loop reactors was studied in detail experimentally andtheoretically.An internal airlift loop reactor was designed and set up for this study.An instru-mentation system based on the electrochemical method was adapted to measure local gas holdup andliquid velocity.A two-dimensional two-fluid model based on the first principles was established andimplemented to model the flow in airlift loop reactors.A corrected turbulent model was incorporatedin the simulation.The shear rate,shear stress and energy dissipation are evaluated from the flowfield.The numerically predicted results and experimental data obtained from this work as well as thesereported in literature are analyzed and compared.

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in FCC Riser Reactors(Ⅰ) Turbulent Gas-Solid Flow-Reaction Model

Gas-solid two-phase turbulent flows,mass transfer,heat transfer and catalytic cracking reactions areknown to exert interrelated influences in commercial fluid catalytic cracking(FCC)riser reactors.In the presentpaper,a three-dimensional turbulent gas-solid two-phase flow-reaction model for FCC riser reactors was devel-oped.The model took into account the gas-solid two-phase turbulent flows,inter-phase heat transfer,masstransfer,catalytic cracking reactions and their interrelated influence.The k-V-k_P two-phase turbulence modelwas employed and modified for the two-phase turbulent flow patterns with relatively high particle concentration.Boundary conditions for the flow-reaction model were given.Related numerical algorithm was formed and a nu-merical code was drawn up.Numerical modeling for commercial FCC riser reactors could be carried out with thepresented model.

Process Intensification in Pneumatically Agitated Slurry Reactors

Pneumatically agitated slurry reactors,including bubble column reactors and airlift loop reactors(ALRs),are important gas-liquid-solid multiphase reactors.These reactors have been widely applied in many processes,especially in the biological fermentation and energy chemical industry,due to their low shear stress,good mixing,perfect mass-/heat-transfer properties,and relatively low costs.To further improve the performance of slurry reactors(i.e.,mixing and mass/heat transfer)and to satisfy industrial require-ments(e.g.,temperature control,reduction of back-mixing,and product separation),the process intensi-fication of slurry reactors is essential.This article starts by reviewing the latest advancements in the intensification of mixing and mass/heat transfer in these two types of reactors.It then summarizes process-intensification methods for mixing and separation that allow continuous production in these slurry reactors.Process-intensification technology that integrates directional flow in an ALR with simple solid-liquid separation in a hydrocyclone is recommended for its high efficiency and low costs.This arti-cle also systematically addresses vital considerations and challenges,including flow regime discrimina-tion,gas spargers,solid particle effects,and other concerns in slurry reactors.It introduces the progress of numerical simulation using computational fluid dynamics(CFD)for the rational design of slurry reactors and discusses difficulties in modeling.Finally,it presents conclusions and perspectives on the design of industrial slurry reactors.

A Review of Techniques for the Process Intensification of Fluidized Bed Reactors

Fluidized beds enable good solids mixing,high rates of heat and mass transfer,and large throughputs,but there remain issues related to fluidization quality and scale-up.In this work I review modification techniques for fluidized beds from the perspective of the principles of process intensification(PI),that is,effective bubbling suppression and elutriation control.These techniques are further refined into(1)design factors,e.g.modifying the bed configuration,or the application of internal and external forces,and(2)operational factors,including altering the particle properties(e.g.size,density,surface area)and fluidizing gas properties(e.g.density,viscosity,or velocity).As far as two proposed PI principles are concerned,our review suggests that it ought to be possible to gain improvements of between 2 and 4 times over conventional fluidized bed designs by the application of these techniques.

Immobilized enzyme reactors in HPLC and its application in inhibitor screening:A review

This paper sets out to summarize the literatures based on immobilized enzyme bio-chromatography and its application in inhibitors screening in the last decade.In order to screen enzyme inhibitors from a mass of compounds in preliminary screening,multi-pore materials with good biocompatibility are used for the supports of immobilizing enzymes,and then the immobilized enzyme reactor applied as the immobilized enzyme stationary phase in HPLC.Therefore,a technology platform of high throughput screening is gradually established to screen the enzyme inhibitors as new anti-tumor drugs.Here,we briefly summarize the selective methods of supports,immobilization techniques,co-immobilized enzymes system and the screening model.

Progress on Porous Ceramic Membrane Reactors for Heterogeneous Catalysis over Ultrafine and Nano-sized Catalysts

Heterogeneous catalysts with ultrafine or nano particle size have currently attracted considerable attentions in the chemical and petrochemical production processes, but their large-scale applications remain challenging because of difficulties associated with their efficient separation from the reaction slurry. A porous ceramic membrane reactor has emerged as a promising method to solve the problem concerning catalysts separation in situ from the reaction mixture and make the production process continuous in heterogeneous catalysis. This article presents a review of the present progress on porous ceramic membrane reactors for heterogeneous catalysis, which covers classification of configurations of porous ceramic membrane reactor, major considerations and some important industrial applications. A special emphasis is paid to major considerations in term of application-oriented ceramic membrane design, optimization of ceramic membrane reactor performance and membrane fouling mechanism. Finally, brief concluding remarks on porous ceramic membrane reactors are given and possible future research interests are also outlined.

KINETICS OF TEMPER EMBRITTLEMENT IN 2.25Cr-1Mo STEEL USED FOR HOT-WALL HYDROFINING REACTORS

Based on the theory of grain boundary segregation, a kinetics model of temper em-brittlement caused by long-term service for hot-wall hydrofining reactors was studied.The kinetics model was applied to phosphorus (P) segregation in 2.25Cr-1Mo steelused for a hot-wall hydrofining reactor, and the kinetics of grain boundary segrea-tion of impurity P in the steel exposed to the process environment of the hydrofiningreactor was calculated on the basis of the model. The Auger electron spectroscopytest was performed in order to determine the grain boundary concentration of P. Theexperimental result is agreement with the theoretical calculated data. The results showthat the kinetics equation is reasonable for predicting the levels of grain boundarysegregation of impurity P in 2.25Cr-1Mo steel used for hot-wall hydrofining reactors.

Application of Froude dynamic similitude in anaerobic baffled reactors to prediction of hydrodynamic characteristics of a prototype reactorusing a model reactor

An anaerobic baffled reactor is a system developed in recent decades and has been used as part of the treatment of high-strength wastewater. Since the function of this system is based on its hydrodynamic features, hydrodynamics and the regime of the flow through the reactor are crucial. In this study, a prototype reactor with eight chambers, which had a total volume of 48 L, and a model reactor, whose dimensions were half of those of the prototype reactor, were used. The Froude dynamic similitude in these reactors was investigated. The results show that the curve dimensionless variances were 0.089 and 0.096 for the prototype and model reactors, respectively, the short-circuiting indices were 0.483 and 0.489 for the prototype and model reactors, respectively, the effective volume and short-circuiting index measurement errors were both 1%, the hydraulic efficiency error was 2%, and the Peclet and dispersion number errors were both 7%. Most of the compared indices were close to one another in value. Therefore, the model reactor can be used based on the Froude dynamic similitude to determine hydrodynamic charac-teristics of a baffled reactor at a full scale.

HYDRODYNAMIC STUDIES ON LOOP REACTORS (Ⅰ) LIQUID JET LOOP REACTORS

Understanding of hydrodynamics in liquid jet loop reactors is a prerequisite step for the fur-ther study of multi-phase flow in loop reactors.A hydrodynamic simulation for liquid jet loop reac-tors is developed from the first principles of transport phenomena in this paper.The turbulence istaken into account by using the standard k-ε model.This approach is used to study the influence ofconfiguration and viscosity on the hydrodynamics.The results are in very reasonable coincidence to ex-perimental data in literature.

Feasibility analysis of 60Co production in pressurized water reactors

The radioactive isotope 60Co is used in many applications and is typically produced in heavy water reactors.As most of the commercial reactors in operation are pressurized light water reactors(PWRs),the world supply of high level radioactive cobalt would be greatly increased if 60Co could be produced in them.Currently,60Co production in PWRs has not been extensively studied;for the 59Co(n,c)60Co reaction,the positioning of 59Co rods in the reactor determines the rate of production.This article primarily uses the models of 60Co production in Canadian CANDU power reactors and American boiling water reactors;based on relevant data from the pressurized water Daya Bay nuclear power plant,a PWR core model is constructed with the Monte Carlo N-Particle Transport Code;this model suggests changes to existing fuel assemblies to enhance 60Co production.In addition,the plug rods are replaced with 59Co rods in the improved fuel assemblies in the simulation model to calculate critical parameters including the effective multiplication factor,neutron flux density,and distribution of energy deposition.By considering different numbers of 59Co rods,the simulation indicates that different layout schemes have different impact levels,but the impact is not large.As a whole,the components with four 59Co rods have a small impact,and the parameters of the reactor remain almost unchanged when four 59Co rods replace the secondary neutron source.Therefore,in theory,the use of a PWR to produce 60Co is feasible.