Sedimentary Environment and Mineralization of the Black Shale Polymetallic Layer in the Early Cambrian,SW China:Constraints from in situ LA-ICP-MS Analysis of Pyrite

A polymetallic layer is usually developed at the bottom of the early Cambrian black shale in Guizhou Province.The mineral that makes up the polymetallic layer is related to the sedimentary facies.To analyze the differentiation mechanism between polymetallic deposits(Ni-Mo and V),the Zhijin Gezhongwu profile located in the outer shelf and the Sansui Haishan V deposit located in the lower slope are selected to study the in situ sulfur isotopes and trace elements of pyrite.The results show that δ^(34)S values of pyrite vary widely from−7.8‰to 28‰in the Gezhongwu profile,while the δ^(34)S values are relatively uniform(from 27.8‰to 38.4‰)in the Haishan profile.The isotopic S composition is consistent with the transition that occurs in the sedimentary phase from the shelf to the deep sea on the transgressive Yangtze platform;this indicates that the δ^(34)SO_(4)^(2−)values in seawater must be differently distributed in depositional environments.The sulfur in the Ni-Mo layer is produced after the mixing of seawater and hydrothermal fluid,while the V layer mainly originates from seawater.Overall,the Ni-Mo and V deposits have been differentiated primarily on the basis of the combined effect of continental weathering and hydrothermal fluid.

Application of NSR-AISC Method in Reserve Estimation and Technical Economic Evaluation of Low-Grade Polymetallic Deposits: Taking a Low-Grade Copper-Molybdenum Mine in Guangdong Province as an Example

The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.

Metallogeny of the Baiyangping Lead-Zinc Polymetallic Ore Concentration Area, Northern Lanping Basin of Yunnan Province, China

The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang （the Sanjiang） area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment-hosted Pb-Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India-Asia continental coUisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the oreforming elements in the east ore belt are mainly Pb-Zn -Sr-Ag, while Pb-Zn-Ag-Cu-Co elements are dominant in the west ore belt. Comparative analysis of the C-O-Sr-S-Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore- forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb-Zn mineralization age of both ore belts was contemporary and formed in the same metaliogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.

Study on the occurrence state of indium in sphalerite of Dulong Sn–Zn–In polymetallic deposit,Southwest China

The Dulong deposit,located in the Laojunshan area of southeastern Yunnan,China,is an important polymetallic deposit due to its high reserves of tin,zinc,and indium.The occurrence state of indium is critical for understanding its supernormal enrichment mechanism.Previous studies investigated the occurrence state of indium(including the valence state)based on the indium content in sphalerite and the correlation between metal concentrations.However,more evidence is needed to better constrain indium occurrence at the micro-,nano-,or even atomic scale.In this study,EPMA-FIB-SEM-TEM and XPS techniques were employed to investigate the indium distribution characteristics and occurrence state in sphalerite from the Dulong Sn–Zn–In polymetallic deposit.The maximum concentration of indium in the indium-rich sphalerite samples is 0.37%,and the results of the EPMA analysis showed a relatively homogeneous distribution of indium in sphalerite.The FIB-SEM-TEM results demonstrated that the lattice stripes of sphalerite were periodically and continuously distributed at the nanoscale,confirming that sphalerite in the deposit was an excellent single crystal structure,and the peak heights of the various characteristic peaks of indium in the EDX spectra were relatively close to each other,with no distinct peaks of high indium content.In addition,the XPS results indicate that the element valence state of indium in sphalerite is In^(3+),and it combines with S^(2-)to form a bond.These results indicate that indium in sphalerite of the Dulong deposit is uniformly distributed at both the micro-and nanoscale,and there is no indium-independent mineral.In^(3+)enters the crystal lattice of sphalerite by replacing Zn2+in the form of isomorphic substitution.

Ore-forming fluid characteristics and ore-forming materials source of the Tudimiaogou – Yindongshan lead-zinc polymetallic orefield, west Henan

1 Introduction The Tudimiaogou-Yindongshan lead-zinc polymetallic orefield is located in the Tudimiaogou-Weimoshi lead and zinc silver polymetallic metallogenic belt.The belt is an important part of southwestern Henan lead and zinc

Geochemistry of Platinum Group and Rare Earth Elements of the Polymetallic Layer in the Lower Cambrian,Weng'an,Guizhou Province

The black shales of the Lower Cambrian Niutitang Formation in Weng＇an, on the Yangtze platform of south China, contain voluminous polymetallic sulfide deposits. A comprehensive geochemical investigation of trace, rare earth, and platinum group elements （PGE） has been undertaken in order to discuss its ore genesis and correlation with the tectono-depositional setting. The ore-bearing layers enrich molybdenum （Mo）, nickel （Ni）, vanadium （V）, lead （Pb）, strontium （Sr）, barium （Ba）, uranium （U）, arsenic （As）, and rare earth elements （REE） in abundance. High uranium/ thorium （U/Th） ratios （U/Th〉I） indicated that mineralization was mainly influenced by the hydrothermal process. The 8U value was above 1.9, showing a reducing sedimentary condition. The REE patterns showed high enrichment in light rare earth elements （LREE） （heavy rare earth elements （HREE） （LREE/HREE=5-17）, slightly negative europium （Eu） and cerium （Ce） anomalies （δEu=0.81- 0.93）, and positive Ce anomalies （δCe=0.76-1.12）. PGE abundance was characterized by the PGE-type distribution patterns, enriching platinum （Pt）, palladium （Pd）, ruthenium （Ru） and osmium （Os）. The Pt/Pd ratio was 0.8, which is close to the ratios of seawater and ultramafic rocks. All of these geochemical features suggest that the mineralization was triggered by hydrothermal activity in an extensional setting in the context of break-up of the Rodinian supercontinent.

Mineral Geochemical Compositions of Tourmalines and Their Significance in the Gejiu Tin Polymetallic Deposits, Yunnan, China

The Gejiu tin polymetallic deposits are located in the southeastern part of Yunnan Province in China. A detailed electronic microprobe study has been carried out to document geochemical compositions of tourmalines from the deposits. The results indicate a systematic change of mineral geochemical compositions, which might be used as a mineral geochemical tracer for post-magmatic hydrothermal fluid, basin fluid and their mixture. The tourmalines from granite are schori with Fe/ （Fe＋Mg） ratios of 0.912-1.00 and Na/（Na＋Ca） ratios of 0.892-0.981. Tourmalines as an inclusion in quartz from the ore bodies are dravite with Fe/（Fe＋Mg） ratios of 0.212-0.519 and Na/（Na＋Ca） ratios of 0.786--0.997. Tourmalines from the country rocks are dravite with Fe/（Fe＋Mg） ratios of 0.313--0.337 and Na/（Na＋Ca） ratio of 0.599-0.723. Tourmalines from cassiterite-tourmaline veins that occur in crannies within the country rocks show distinct optical zoning with alternate occurrence of dravite and schorl, Fe/（Fe＋Mg）=0.374-0.843, Na/（Na＋Ca）=0.538-0.987. It suggests that schorl in granite and dravite in carbonatite are related to magmatic fluid and basin fluid respectively. When magmatic fluid rose up and entered into crannies of the country rocks, consisting mainly of carbonatite, basin fluid would be constantly added to the magmatic fluid. The two types of fluid were mixed in structural crannies of the sedimentary basin accompanied with periodic geochemical oscillations to form material records in chemical composition zonings of tourmalines.

Diversity of Mineralization and Spectrum of the Gejiu Superlarge Tin-Copper Polymetallic Deposit,Yunnan,China

The Gejiu （个旧） deposit is a superlarge tin-copper polymetallic ore-forming concentration area characterized by excellent metallogenic geological settings and advantageous ore-controlling factors. The deposit displays diverse mineralization properties due to different minerals and mineral deposit types. Based on the principal metallogenic factors, metallogenic mechanisms, mineralized components, and occurrence of mineral deposits or ore bodies, the Gejiu mineral district can be divided into 2 combinations of metallogenic series, 4 metallogenic series, 8 subseries, and 27 mineral deposit types. Spatial zonality is evident. The distribution regularity of the elements in both plane and section is Be-W, Sn （Cu, Mo, Bi, Be）-Sn, Pb, Ag-Pb, Zn around a granitic intrusion. The metallogenic epoch is mainly concentrated in the late Yanshanian. During this period, large-scale metallogenic processes related to movement caused by tectonics and magmatism occurred, and a series of magmatic hydrothermal deposits formed. The ore-forming processes can be divided into 4 stages： the silicate stage, the oxide stage, the sulphide stage, and the carbonate stage. Based on the orderliness and diversity （in terms of time, space, and genesis） of the mineralization, the authors have developed a comprehensive spectrum of ore deposits in the Gejiu area. This newly proposed diversity of mineralization and the spectrum developed in this work are useful not only for interpreting the genesis of the Gejiu deposit but also for improving mineral exploration in the area, and in particular, for finding large deposits.

Late Mesozoic Ore-forming Events in the Ningwu Ore District, Middle-Lower Yangtze River Polymetallic Ore Belt, East China: Evidence from Zircon U-Pb Geochronology and Hf Isotopic Compositions of the Granodioritic Stocks

Late Mesozoic volcanic-subvolcanic rocks and related iron deposits, known as porphyry iron deposits in China, are widespread in the Ningwu ore district （Cretaceous basin） of the middle-lower Yangtze River polymetallic ore belt, East China. Two types of Late Mesozoic magmatic rocks are exposed： one is dioritic rocks closely related to iron mineralization as the hosted rock, and the other one is granodioritic （-granitic） rocks that cut the ore bodies. To understand the age of the iron mineralization and the ore-forming event, detailed zircon U-Pb dating and Hf isotope measurement were performed on granodioritic stocks in the Washan, Gaocun-Nanshan, Dongshan and Heshangqiao iron deposits in the basin. Four emplacement and crystallization （typically for zircons） ages of granodioritic rocks were measured as 126.1±0.5 Ma, 126.8±0.5 Ma, 127.3±0.5 Ma and 126.3±0.4 Ma, respectively in these four deposits, with the LA-MC-ICP-MS zircon U-Pb method. Based on the above results combined with previous dating, it is inferred that the iron deposits in the Ningwu Cretaceous basin occurred in a very short period of 131-127 Ma. In situ zircon Hf compositions of εHf（t） of the granodiorite are mainly from -3 to -8 and their corresponding 176Hf/177Hf ratio are from 0.28245 to 0.28265, indicating similar characteristics of dioritic rocks in the basin. We infer that granodioritic rocks occurring in the Ningwu ore district have an original relationship with dioritic rocks. These new results provide significant evidence for further study of this ore district so as to understand the ore-forming event in the study area.

Genetic Types and Metallogenic Model for the Polymetallic Copper–Gold Deposits in the Tongling Ore District, Anhui Province, Eastern China

The Tongling ore district is one of the most economically important ore areas in the Middle–Lower Yangtze River Metallogenic Belt, eastern China. It contains hundreds of polymetallic copper–gold deposits and occurrences. Those deposits are mainly clustered(from west to east) within the Tongguanshan, Shizishan, Xinqiao, Fenghuangshan, and Shatanjiao orefields. Until recently, the majority of these deposits were thought to be skarn-or porphyry–skarn-type deposits; however there have been recent discoveries of numerous vein-type Au, Ag, and Pb-Zn deposits that do not fall into either of these categories. This indicates that there is some uncertainty over this classification. Here, we present the results of several systematic geological studies of representative deposits in the Tongling ore district. From investigation of the ore-controlling structures, lithology of the host rock, mineral assemblages, and the characteristics of the mineralization and alteration within these deposits, three genetic types of deposits(skarn-, porphyry-, and vein-type deposits) have been identified. The spatial and temporal relationships between the orebodies and Yanshanian intrusions combined with the sources of the ore-forming fluids and metals, as well as the geodynamic setting of this ore district, indicate that all three deposit types are genetically related each other and constitute a magmatic–hydrothermal system. This study outlines a model that relates the polymetallic copper–gold porphyry-, skarn-, and vein-type deposits within the Tongling ore district. This model provides a theoretical basis to guide exploration for deep-seated and concealed porphyry-type Cu(–Mo, –Au) deposits as well as shallow vein-type Au, Ag, and Pb–Zn deposits in this area and elsewhere.

Rare Earth Elements Composition and Constraint on the Genesis of the Polymetallic Crusts and Nodules in the South China Sea

The rare earth elements（REE） composition of the polymetallic crusts and nodules obtained from the South China Sea（SCS） were analyzed through inductively coupled plasma mass spectrometry.Results revealed great differences in the REE abundances（∑REE） of the SCS polymetallic crusts and nodules; the crusts show the highest ∑REE, whereas the nodules exhibit the lowest ∑REE. The similarity in their NASC-normalized patterns, the enriched light REE（LREE）, the markedly positive Ce anomaly（δCe）, and the non-or weakly positive Eu anomaly（δEu）, suggest that the polymetallic crusts and nodules are of hydrogenetic origin. Moreover, the REE contents and their relevant parameters are quite different among the various layers of the crusts and nodules, which probably results from the different marginal sea environments and mineral assemblages of the samples. The growth profiles of the SCS polymetallic crusts and nodules reveal the tendency ∑REE and δCe to slightly increase from the outer to the inner layers, suggesting that the growth environments of these samples changed smoothly from an oxidizing to a relatively reducing environment; in addition, the crust ST1 may have experienced a regressive event（sea-level change） during its growth, although the REE composition of the seawater remained relatively stable. On the basis of the regional ∑REE distribution in the SCS crusts and nodules,the samples collected near the northern margin were influenced by terrigenous material more strongly compared with the other samples, and the REE contents are relatively low. Therefore, the special geotectonic environment is a significant factor influencing the abundance of elements, including REE and other trace elements. Compared with the oceanic seamount crusts and deep-sea nodules from other oceans,the SCS polymetallic crusts and nodules exhibit special REE compositions and shale-normalized patterns, implying that the samples are of marginal sea-type Fe-Mn sedimentary deposits, which are strongly affected by the epicontinental environment, and that they grew in a more oxidative seawater environment. This analysis indicates that the oxidized seawater environment and the special nano property of their Fe-Mn minerals enrich the REE adsorption.

The effect of Fe-Mn minerals and seawater interface and enrich-ment mechanism of ore-forming elements of polymetallic crusts and nodules from the South China Sea

Ferromanganese crusts and nodules are important submarine mineral resources that contain various metal elements with significant economic value. In this study, polymetallic crusts and nodules obtained from the South China Sea （SCS） were determined by using X-ray power diffraction （XRD）, Raman spectroscopy （RS）, Fourier transform infrared spectroscopy （FTIR）, and X-ray photoelectron spectroscopy （XPS） to systematically investigate and analyze the mineralogical and spectral characteristics of the Fe-Mn minerals. XRD measurements revealed that the SCS polymetallic crusts and nodules were composed of vernadite, quartz, and plagioclase. The nodules also contained todorokite. The Fe-phase minerals of the SCS crusts and nodules were composed of amorphous Fe oxide/hydroxide, and the Mn- and Fe-phases minerals exhibited relatively poor degrees of crystallization. FTIR results showed that the Fe-Mn minerals in the crusts and nodules included a large number of surface hydroxyl groups. These surface hydroxyl groups contained protons that could provide reactive sites for complexation of ore-forming elements in seawater. XPS results indicated that the surfaces of the Fe-Mn minerals mainly contained Fe, Mn, and O. Fe was present in the trivalent oxidation state, while Mn, which may contain several bivalent oxidation state, was present in the tetravalent and trivalent oxidation states. The SCS polymetallic crusts and nodules were compared with Pacific seamount crusts, and results showed that the surface hydroxyl （-OH） groups of the SCS crusts and nodules numbered more than the lattice oxygen （O^2-）. But the lattice oxygen of Pacific seamount crusts numbered more than the surface hydroxyl groups. This characteristic indicated that the degree of crystallization of Fe-Mn minerals from the Pacific Ocean was higher than that of minerals from the South China Sea. Comprehensive studies showed that ore-forming elements in the interface between seawater and the Fe-Mn minerals in the submarine ferromanganese crusts and nodules employed the following enrichment mechanisms： （1） the metal ion complexed with the surface hydroxyl of Fe-Mn minerals to form hydroxyl complexes, which were connected by coordination bonds or stable inner-sphere complexes that exchanged protons on the mineral surfaces; （2） the charged surfaces of the minerals and metal cations formed outer-sphere complexes, which made up the electrostatic double layer, through electrostatic adsorption; and （3） the metal cations isomorphously exchanged the Mn and Fe ions of the mineral lattice structure.

Ore Genesis for Stratiform Ore Bodies of the Dongfengnanshan Copper Polymetallic Deposit in the Yanbian Area, NE China:Constraints from LA-ICP-MS in situ Trace Elements and Sulfide S–Pb Isotopes

The Dongfengnanshan Cu polymetallic deposit is one representative deposit of the Tianbaoshan ore district in the Yanbian area, northeast(NE) China. There occur two types of ore bodies in this deposit, the stratiform ore bodies and veintype ones, controlled by the Early Permian strata and the Late Hercynian diorite intrusion, respectively. Due to the ambiguous genetic type of the stratiform ore bodies, there has been controversy on the relationship between them and veintype ore bodies. To determine the genetic type of stratiform ore bodies, laser ablation inductively coupled plasma mass spectrometry(LA-ICP-MS) in situ trace elements and S–Pb isotope analysis have been carried on the sulfides in the stratiform ore bodies. Compared with that in skarn, Mississippi Valley-type(MVT), and epithermal deposits, sphalerite samples in the stratiform ore bodies of the Dongfengnanshan deposit are significantly enriched in Fe, Mn, and In, while depleted in Ga, Ge, and Cd, which is similar to the sphalerite in volcanic-associated massive sulfide(VMS) deposits. Co/Ni ratio of pyrrhotites in the stratiform ore bodies is similar to that in VMS-type deposits. The concentrations of Zn and Cd of chalcopyrites are similar to those of recrystallized VMS-type deposits. These characteristics also reflect the intermediate ore-forming temperature of the stratiform ore bodies in this deposit. Sulfur isotope compositions of sulfides are similar to those of VMS-type deposits, reflecting that sulfur originated from the Permian Miaoling Formation. Lead isotope compositions indicate mixed-source for lead. Moreover, the comparison of the Dongfengnanshan stratiform ore bodies with some VMStype deposits in China and abroad, on the trace elements and S–Pb isotope characteristics of the sulfides reveals that the stratiform ore bodies of the Dongfengnanshan deposit belong to the VMS-type, and have closely genetic relationship with the early Permian marine volcanic sedimentary rocks.

Geochemical Characteristics of Rare Earth Elements in Gejiu Tin Polymetallic Deposits, Yunnan Province, China

In order to get a better understanding of metallogeny, the geochemical characteristics of REE and trace element for Gejiu tin polymetallic deposits were studied by comparing concentrations of REE and trace elements in different type ores and rocks, including skarn-type ore, bedded-type ore, vein-type ore, altered granite, country rocks. Results of this study indicated that the metallogenic matters for different type ores in the study area might be derived from the same origin source, which may be mainly related to granitic activities. Furthermore, there are some differences in concentrations of REE in different ores due to their different depositional mechanism during that time. LREE concentrations were enriched relatively in the vein-type ores and the bedded-type ores with relatively low total REE concentrations, whereas total REE concentrations were higher in the skarn-type ores with LREE and HREE concentrations in wide variation ranges.

Re-Os Isotopic Dating of a W-Be Polymetallic Deposit in the Southern Qinling Region, China

Objective In recent years, a series of tungsten prospecting breakthroughs have been made in the southern Qinling Mountains. Especially, a new deposit type with a scheelite -beryl-molybdenite assemblage in the Zhen＇an area of Shaanxi Province was firstly discovered. This deposit is currently in a detailed investigation stage, and no detailed study has been yet conducted. This work selected one molybdenite sample from the Be （W） ores in this deposit for Re-Os isotope measurements to define the time limit of tungsten and beryllium mineralization, and to further reveal the ore-forming geological setting of rare metals in the southern Qinling region.

New Zircon U-Pb Age of the Super-Large Lijiagou Spodumene Deposit in Songpan Garze Fold Belt, Eastern Tibet： Implications for Early Jurassic Rare-Metal Polymetallic Event

Objective The Songpan-Garze Fold Belt(SGFB),located in the eastern part of the Tibet Plateau and west of the Sichuan Basin,is an important pegmatite province in China.Some famous pegmatite type deposits occur in the SGFB,including the Xuebaoding,Jiajika,Keeryin rare metal deposits and Danba muscovite deposit(Li Jiankang et al.,2015).The newly discovered super-large Lijiagou

Quantitative prediction process and evaluation method for seafloor polymetallic sulfide resources

Seafloor polymetallic sulfide resources exhibit significant development potential. In 2011, China received the exploration rights for 10,000 km2 of a polymetallic sulfides area in the Southwest Indian Ocean; China will be permitted to retain only 25% of the area in 2021. However, an exploration of seafioor hydrothermal sulfide deposits in China remains in the initial stage. According to the quantitative prediction theory and the exploration status of seafloor sulfides, this paper systematically proposes a quantitative prediction evaluation process of oceanic polymetallic sulfide resources and divides it into three stages： prediction in a large area, prediction in the prospecting region, and the verification and evaluation of targets. The first two stages of the prediction process have been employed in seafloor sulfides prospecting of the Chinese contract area. The results of stage one suggest that the Chinese contract area is located in the high posterior probability area, which indicates good prospecting potential area in the Indian Ocean. In stage two, the Chinese contract area of 48^-52~E has the highest posterior probability value, which can be selected as the reserved region for additional exploration. In stage three, the method of numerical simulation is employed to reproduce the ore-forming process of sulfides to verify the accuracy of the reserved targets obtained from the three-stage prediction. By narrowing the exploration area and gradually improving the exploration accuracy, the prediction will provide a basis for the exploration and exploitation of seafloor polymetallic sulfide resources.

Numerical simulation of hydrothermal mineralization associated with simplified chemical reactions in Kaerqueka polymetallic deposit, Qinghai, China

The Kaerqueka polymetallic deposit, Qinghai, China, is one of the typical skarn-type polymetallic ore deposits in the Qimantage metallogenic belt. The dynamic mechanism on the formation of the Kaerqueka polymetallic deposit is always an interesting topic of research. We used the finite difference method to model the mineralizing process of the chalcopyrite in this region with considering the field geological features, mineralogy and geochemistry. In particular, the modern mineralization theory was used to quantitatively estimate the related chemical reactions associated with the chalcopyrite formation in the Kaerqueka polymetallic deposit. The numerical results indicate that the hydrothermal fluid flow is a key controlling factor of mineralization in this area and the temperature gradient is the driving force of pore-fluid flow. The metallogenic temperature of chalcopyrite in the Kaerqueka polymetallic deposit is between 250 and 350 ℃. The corresponding computational results have been verified by the field observations. It has been further demonstrated that the simulation results of coupled models in the field of emerging computational geosciences can enhance our understanding of the ore-forming processes in this area.

Copper,zinc,and iron bioleaching from polymetallic sulphide concentrate

Bioleaching of low-grade complex Cu&ndash;Zn&ndash;Pb&ndash;Fe&ndash;Ag&ndash;Au sulphide concentrate (of Majdanpek ore body, RTB Bor, Serbia) was carried out in an aerated bioleach reactor in the presence of mesophilic mixed bacterial culture of Acidithiobacillus ferrooxidans, Acidithiobacillus thiooxidans, and Leptospirillum ferrooxidans. A mesophilic acidophiles culture was isolated from the acidic solution of the underground copper mine of Bor, Serbia. The nutrient medium was 9K at pH 1.6. 87% of the particles were <10 &micro;m in size, with a pulp density of 8% (w/v). Bioleaching efficiencies of 89% for zinc, 83% for copper, and 68% for iron can be achieved in the examined conditions. Kinetic analysis shows that the change in leaching corresponds to the Spencer-Topley kinetic model for diffusion-controlled topochemical reactions.

Growth Pattern and Its Indication of Spheroidal Nano-Micro Crystal Aggregates of Pyrite in the Baiyunpu Pb-Zn Polymetallic Deposit, Central Hunan

The Baiyunpu deposit lies in the southwest plunging Dachengshan anticline in central Hunan, which is a large Pb-Zn polymetallic deposit. The orebodies were surrounded by the Qiziqiao Formation limestone in the Middle Devonian, and its geological occurrence is consistent with the wall rocks. A large number of spheroidal pyrite aggregates are found unevenly distributed in the ores. The spheroidal aggregates are made up of kernels and concentric rings. The kernels are composed of approximately epigranular pyrite nanocrystals, while the rings are composed of accumulated pyrite microcrystals growing along the radial direction. The spheroidal pyrite aggregate and its outer zones can be divided into five areas（A–E）. The results of electron probe micro analysis（EPMA） show that from the zone A1 to B, Co/Ni 〈1, the sum of Co and Ni is 0.08%–0.26%, S/Fe increases from 2.06 to 2.15. While from the zone C to E, Ni cannot be detected and S/Fe decreases from 2.22 to 2.08. Powder X-ray diffraction（XRD） analysis in the micro zone shows obvious crystalline characteristics in the aggregates. Moving from the inside outwards, the maximum diffraction peak intensity of the（111） and（220） crystal planes of pyrite increases, and the crystallinity improves. The degree of change in the（111） plane is the most prominent. Considering the theory of crystal growth along with the geologic features of the depositional environment where the spheroidal pyrite aggregates developed, we confirm that the spheroidal aggregates are the result of nano-micro crystalline gathering and growth occurring by the following sequence of processes：nano-crystalline nucleation and growth, gathering into a ball, oriented growth of microcrystals, continuous accumulation, and adjustment of grain boundaries. The formation of the spheroidal pyrite aggregates in the late Qiziqiao Formation of the Middle Devonian occurred in a neutral to weak alkaline and reductive sedimentary environment in the normal oxygen-rich shallowwater carbonate platform edge. The variations in the S/Fe ratio and crystallisation characteristics indicate that during pyrite crystal growth, the sulphur fugacity was high locally and rose constantly, the degree of supersaturation decreased locally and the growth environment was stable relatively.