Optimizing support performances of bolt reaming and anchoring in a coal drift

In current practice of bolt reaming and anchoring of roadways in soft coal and rock mass,resin cartridges bend easily under the strong pushing and stirring of bolts,and the resin accumulates in the bolt-reamed area and does not participate in the stirring.As a result,bolts encounter high drilling resistance and cannot reach the bottom of drillholes.The effective anchorage length is far less than the actual anchorage length.Bolts are not centered,and the shear is misaligned at the joint surface in the reaming area,which leads to cracking of the whole anchoring solid and large shear deformation of bolts.This study systematically analyzes the characteristics of roadway bolt reaming and anchoring.The influences of resin stirring force,bolt pull-out force,and reamingeanchoring solid strength on reamingeanchoring performance were analyzed theoretically.The main purpose is to develop a device that enhances reaming and anchoring.The mechanism through which the device strengthens the reamingeanchoring solid was analyzed theoretically.Numerical simulation and experiments were carried out to verify the improved performance of the small-pore reaming and anchoring using the proposed technology.The results showed that the stirring migration rate of the resin cartridge is greatly improved by adding the device to bolts.The reaction rate of the anchoring mixture,stirring pressure,pull-out force of the reaming and anchoring system,bolt concentricity,and shear and compressive strengths of the anchoring solid are also enhanced in the reaming area.This ensures that the resin cartridge in the reaming area is completely stirred,which greatly improves the shear resistance of the reamingeanchoring solid.Meanwhile,the drilling performance,torsional force,and stirring efficiency of bolts are maximized and prevail over those of conventional bolts.

Design and optimization of fluid lubricated bearings operated with extreme working performances——a comprehensive review

Fluid lubricated bearings have been widely adopted as support components for high-end equipment in metrology,semiconductor devices,aviation,strategic defense,ultraprecision manufacturing,medical treatment,and power generation.In all these applications,the equipment must deliver extreme working performances such as ultraprecise movement,ultrahigh rotation speed,ultraheavy bearing loads,ultrahigh environmental temperatures,strong radiation resistance,and high vacuum operation,which have challenged the design and optimization of reliable fluid lubricated bearings.Breakthrough of any related bottlenecks will promote the development course of high-end equipment.To promote the advancement of high-end equipment,this paper reviews the design and optimization of fluid lubricated bearings operated at typical extreme working performances,targeting the realization of extreme working performances,current challenges and solutions,underlying deficiencies,and promising developmental directions.This paper can guide the selection of suitable fluid lubricated bearings and optimize their structures to meet their required working performances.

Interfacial friction effects on sealing performances of elastomer packer

Elastomer sealing performance is of critical importance for downhole tools application including the use of fracturing(Frac)plugs during multi-stage hydraulic fracking.In practice sealing performances of such plugs are normally evaluated through pressure tests,and in numerical simulation studies,maximum contact stress,average contact stress and contact length data are used to determine sealing quality between a packer and casing.In previous studies,the impact of friction forces on sealing performance is often overlooked.This work aims to fill this knowledge gap in determining the influence of friction forces on elastomer packer sealing performances.We first determined the most appropriate constitutive hyperelastic model for the elastomers used in frac plug.Then we compared analytical calculation results with Finite Element Analysis simulation using a simplified tubular geometry and showed the significant influences on interfacial friction on elastomer packer stress distribution,deformation,and contact stress after setting.With the demonstration of validity of FEA method,we conducted systematic numerical simulation studies to show how the interfacial friction coefficients can affect the maximum contact stress,average contact stress,contact stress distribution,and maximum mises stress for an actual packer used in plug products.In addition,we also demonstrated how the groove in a packer can affect packer deformation and evolvement during setting with the consideration of interfacial stress.This study underscores the critical role that friction forces play in Frac plug performance and provides a new dimension for optimizing packer design by controlling interfacial interactions at the packer contact surfaces.

Elliptical encirclement control capable of reinforcing performances for UAVs around a dynamic target

Most researches associated with target encircling control are focused on moving along a circular orbit under an ideal environment free from external disturbances.However,elliptical encirclement with a time-varying observation radius,may permit a more flexible and high-efficacy enclosing solution,whilst the non-orthogonal property between axial and tangential speed components,non-ignorable environmental perturbations,and strict assignment requirements empower elliptical encircling control to be more challenging,and the relevant investigations are still open.Following this line,an appointed-time elliptical encircling control rule capable of reinforcing circumnavigation performances is developed to enable Unmanned Aerial Vehicles(UAVs)to move along a specified elliptical path within a predetermined reaching time.The remarkable merits of the designed strategy are that the relative distance controlling error can be guaranteed to evolve within specified regions with a designer-specified convergence behavior.Meanwhile,wind perturbations can be online counteracted based on an unknown system dynamics estimator(USDE)with only one regulating parameter and high computational efficiency.Lyapunov tool demonstrates that all involved error variables are ultimately limited,and simulations are implemented to confirm the usability of the suggested control algorithm.

Improving the electrical performances of InSe transistors by interface engineering

InSe has emerged as a promising candidate for next-generation electronics due to its predicted ultrahigh electrical performance.However,the efficacy of the InSe transistor in meeting application requirements is hindered due to its sensitivity to interfaces.In this study,we have achieved notable enhancement in the electrical performance of InSe transistors through interface engineering.We engineered an InSe/h-BN heterostructure,effectively suppressing dielectric layer-induced scattering.Additionally,we successfully established excellent metal-semiconductor contacts using graphene ribbons as a buffer layer.Through a methodical approach to interface engineering,our graphene/InSe/h-BN transistor demonstrates impressive on-state current,field-effect mobility,and on/off ratio at room temperature,reaching values as high as 1.1 mA/μm,904 cm^(2)·V^(-1)·s^(-1),and>10~6,respectively.Theoretical computations corroborate that the graphene/InSe heterostructure shows significant interlayer charge transfer and weak interlayer interaction,contributing to the enhanced performance of InSe transistors.This research offers a comprehensive strategy to elevate the electrical performance of InSe transistors,paving the way for their utilization in future electronic applications.

Fruit Powder of Tetrapleura tetraptera in Local Feed on Some Zootechnical Performances of Juveniles of Clarias gariepinus in Concrete Tank

This study focused on the supplementation of four-sided spice fruit powder (Tetrapleura tetraptera) on some zootechnical performances of juveniles of Clarias gariepinus and was carried out from February 14 to July 20 at the Massoma Fish Farm of Bojongo Mbeidi located in the Littoral Region, Department of Wouri, Douala IV district. The farm benefits from a climate favorable to aquaculture activity. For this purpose, five (5) treatments were tested including T0+ (imported feed), T0-, T0.3, T0.4, and T0.5 respectively for the treatments with 0% supplemented food;0.3%;0.4% and 0.5% of Tetrapleura tetraptera powder. A total of 450 Clarias gariepinus fry with an initial average weight of 7 ± 1.5 g, were distributed in happas of 0.49 m2 each placed in Triplicate in a completely randomized device. Four isoprotein foods with 38% crude protein were formulated to feed these fry at 7% of their biomass per day for 15 days then to their fullness until the end of the experiment. Intermediate fishing was carried out every fortnight. 75 days later, the results recorded show that the highest average survival rate (96.44% ± 3.5%) was recorded with the subjects fed feed supplemented with 0.4% T. tetraptera powder. The average weight (120.93 ± 67.20), weight gain (113.93 ± 67.20), specific growth rate (3.64 ± 0.79% g/d) and total lengths and standard (26.43 ± 1.9 and 23.66 ± 1.76) the highest were recorded with the T0+ treatment (imported feed). The highest conditioning factor K (2.14 ± 0.15) was recorded with the treatment supplemented with 0.4% T. tetraptera. The lowest conversion ratio (1.28) was recorded with the treatment fed with imported blue crown food (T0+). Furthermore, the lowest production cost was recorded with the treatment supplemented with 0.4% T. tetraptera. It appears from this study that the juveniles of C. gariepinus better value the feed substituted with 0.4% of the powder of four sides (Tetrapleura tetraptera).

Ballistic performances of the hourglass lattice sandwich structures under high-velocity fragments

In this paper,the numerical simulation method is used to study the ballistic performances of hourglass lattice sandwich structures with the same mass under the vertical incidence of fragments.Attention is paid to elucidating the influences of rod cross-section dimensions,structure height,structure layer,and rod inclination angle on the deformation mode,ballistic performances,and ability to change the ballistic direction of fragments.The results show that the ballistic performances of hourglass lattice sandwich structures are mainly affected by their structural parameters.In this respect,structural parameters optimization of the hourglass lattice sandwich structures enable one to effectively improve their ballistic limit velocity and,consequently,ballistic performances.

Aseismic performances of constrained damping lining structures made of rubber-sand-concrete

Flexible damping technology considering aseismic materials and aseismic structures seems be a good solution for engineering structures.In this study,a constrained damping structure for underground tunnel lining,using a rubber-sand-concrete(RSC)as the aseismic material,is proposed.The aseismic performances of constrained damping structure were investigated by a series of hammer impact tests.The damping layer thickness and shape effects on the aseismic performance such as effective duration and acceleration amplitude of time-domain analysis,composite loss factor and damping ratio of the transfer function analysis,and total vibration level of octave spectrum analysis were discussed.The hammer impact tests revealed that the relationship between the aseismic performance and damping layer thickness was not linear,and that the hollow damping layer had a better aseismic performance than the flat damping layer one.The aseismic performances of constrained damping structure under different seismicity magnitudes and geological conditions were investigated.The effects of the peak ground acceleration(PGA)and tunnel overburden depth on the aseismic performances such as the maximum principal stress and equivalent plastic strain(PEEQ)were discussed.The numerical results show the constrained damping structure proposed in this paper has a good aseismic performance,with PGA in the range(0.2-1.2)g and tunnel overburden depth in the range of 0-300 m.

Physical-Rheological Properties and Performances of Rejuvenated(Styrene-Butadiene-Styrene)Asphalt with Polymerized-MDI and Aromatic Oil

Traditional asphalt rejuvenators,like aromatic oil(AO),are known to be effective in improving the low-temperature properties and fatigue performances of aged SBS(styrene-butadiene-styrene)modified asphalt(SBSMA)binders and mixtures.However,these rejuvenators inevitably compromise their high-temperature properties and deformation resistances because they dilute asphalt binder but do not fix the damaged structures of aged SBS.In this study,a highly-active chemical called polymerized 4,4-diphenylmethane diisocyanate(PMDI)was used to assist the traditional AO asphalt rejuvenator.The physical and rheological characteristics of rejuvenated SBSMA binders and the moisture-induced damage and rut deformation performances of corresponding mixtures were comparatively evaluated.The results showed that the increasing proportion of AO compromises the hightemperature property and hardness of aged SBSMA binder,and an appropriate amount of PMDI works to compensate such losses;3%rejuvenator at mass ratio of AO:PMDI=70:30 can have a rejuvenated SBSMA binder with a high-temperature performance similar to that of fresh binder,approximately at 71.4°C;the use of AO can help reduce the viscosity of PMDI rejuvenated SBSMA binder for improving its workability;PMDI can help improve the resistance of AO rejuvenated SBSMA binder to deformation,especially at elevated temperatures,through its chemical reactions with aged SBS;moisture induction can enhance the resistance to damage of rejuvenated mixtures containing AO/PMDI or only PMDI;and the rejuvenator with a mass ratio of AO:PMDI=70:30 can lead the rejuvenated mixture to meet the application requirement,with a rut depth of only 2.973 mm,although more PMDI can result in a higher resistance of rejuvenated mixtures to high-temperature deformation.

Video Games and School Performances of Dakar High School Students

The triptych (Smartphones, Video games, adolescents) has imposed itself on the collective consciousness in the form of questioning to the point of becoming a social phenomenon. It thus raises concerns about the uses that adolescents make of it and the effects on their academic performance, which we proposed to study among middle school students from the Dakar academy inspection. Where appropriate, we used mixed methods with the collection techniques of questionnaire survey, semi-structured interviews respectively with middle school students, adults (parents, supervisors, teachers, etc.), participant observation and literature review. Concretely, before accessibility to video games, the middle school students were more idle and well-behaved, watched a lot of TV, played with their brothers and sisters or did household chores. The majority of young people had good, very good or excellent conduct and their averages were fair, fairly good or good. With access to a diverse digital environment, middle school students have passionately turned to video games. As a result, their learning time, concentration and submission to parental injunctions have declined significantly. This situation negatively affected their academic performance and encouraged bad behavior.

Studies on Transferrin and Posttremsferr Polymorphism and Their Relationship with Performances in Red Steppe

[Objective] The aim of this study was to investigate the correlation between blood protein polymorphism of red steppe and its performance.[Method]Two blood protein polymorphic loci were detected in transferring(Tf)and posttremsferr(Ptf)from thirteen red steppes and eighteen hybrid of limousin and red steppe by polyacrylamide gel electrophoresis.[Result]Tf and Ptf were controlled by three and two alleles respectively.[Conclusion]The variance analysis of blood protein polymorphic loci and its performance indicates that two protein loci have a positive or negative correlation with some traits of red steppe and the improved limousin cattle population.

Effects of stoichiometric ratio La/Mg on structures and electrochemical performances of as-cast and annealed La-Mg-Ni-based A_2B_7-type electrode alloys

In order to investigate the influences of the stoichiometric ratio of La/Mg （increasing La and decreasing Mg on the same mole ratio） on the structure and electrochemical performances of the La-Mg-Ni-based A2B7-type electrode alloy, the as-cast and the annealed ternary Lao.8＋xMgo.2_xNi3.5 （x=0-0.05） electrode alloys were prepared. The characterization of electrode alloys by X-ray diffraction （XRD） and scanning electron microscopy （SEM） shows that all the as-cast and the annealed alloys hold two major phases of （La,Mg）2Ni7 and LaNi5 as well as a residual phase of LaNi3. Moreover, the increase of La/Mg ratio brings on a decline of （La,Mg）2Ni7 phase and a rise of LaNi5 and LaNi3 phases. The variation of La/Mg ratio gives rise to an evident change of the electrochemical performances of the alloys. The discharge capacities of the as-cast and the annealed alloys evidently decrease with growing the La/Mg ratio, while the cycle stabilities of the alloys visibly augment under the same condition. Furthermore, the high rate discharge ability （HRD）, the electrochemical impedance spectrum （EIS）, the Tafel polarization curves, and the potential step measurements all indicate that the electrochemical kinetic properties of the alloy electrodes increase with the La/Mg ratio rising.

Bayesian and Multiple Bayesian Analysis of the Reliability Performances for Series System with Cold Standby Units

By using Bayesian and multiple Bayesian method, the failure probability, reliability and mean time to failure(MTTF) of series system with cold standby units are estimated. At last, we compare the two estimators by means of Monte_Carlo simulation.

Improving electrochemical performances of LiFePO_4 /C cathode material via a novel three-layer electrode

As an improvement on the conventional two-layer electrode （active material layerlcurrent collector）, a novel sandwich-like three-layer electrode （conductive layerlactive material layertcurrent collector） for cathode material LiFePO4/C was introduced in order to improve its electrochemical performance. LiFePO4/C in the three-layer electrode exhibited superior rate capability in comparison with that in the two-layer electrode in accordance with charge-discharge examination. Cyclic voltammetry and electrochemical impedance spectroscopy indicated that Fe3＋/Fe2＋ redox couple for LiFePO4 in the three-layer electrode displayed faster kinetics, better reversibility and much lower charge transfer resistance than that in the two-layer electrode in electrochemical process. For three-layer electrode, the holes in the surface of active material layer were filled by smaller acetylene black grains, which formed electrical connections and provided more pathways to electron transport to/from LiFePO4/C particles exposed to the bulk electrolyte.

Modeling Photovoltaic Performances of BTBPD-PC61BM System via Density Functional Theory Calculations

Designing and fabricating high-performance photovoltaic devices have remained a major challenge in organic solar cell technologies. In this work, the photovoltaic performances of BTBPD-PC61BM system were theoretically investigated by means of density functional theory calculations coupled with the Marcus charge transfer model in order to seek novel photovoltaic systems. Moreover, the hole-transfer properties of BTBPD thin-film were also studied by an amorphous cell with 100 BTBPD molecules. Results revealed that the BTBPD- PC61BM system possessed a middle-sized open-circuit voltage of 0.70 V, large short-circuit current density of 16.874 mA/cm2, large fill factor of 0.846, and high power conversion effi- ciency of 10%. With the Marcus model, the charge-dissociation rate constant was predicted to be as fast as 3.079×10^13 s^-1 in the BTBPD-PC61BM interface, which was as 3-5 orders of magnitude large as the decay （radiative and non-radiative） rate constant （108-10^10 s^-1）, indicating very high charge-dissociation efficiency （-100%） in the BTBPD-PC61BM system. Furthermore, by the molecular dynamics simulation, the hole mobility for BTBPD thin-film was predicted to be as high as 3.970× 10^-3 cm^2V^-1s^-1, which can be attributed to its tight packing in solid state.

Collecting performances of N-dodecylethylene-diamine and its adsorption mechanism on mineral surface

The collecting performances of N-dodecylethylene-diamine （ND） to quartz and hematite were studied via single mineral flotation. Experimental results show that ND has stronger collecting ability to quartz than hematite. Different floatability of quartz and hematite was presented in the existence of depressant. Compared with lauryl amine, ND has stronger collecting performances to quartz. Satisfied separation result of artificially mixed sample was acquired with iron grade of concentrate of 59.92% and iron recovery of 88.85% when pulp pH value was 7.27 with 41.7 mg/L collector and 3.33 mg/L starch. Polar group properties calculation results indicated that ND has stronger collecting capability and better selectivity than lauryl amine. Measurement results of zeta-potentials and infrared spectrum showed that hydrogen bonding adsorption and electrostatic adsorption occur between the surface of ND and quartz.

EXPERIMENTAL STUDY ON OPTIC PERFORMANCES OF OPTIC FIBER BRAIDED IN CARBON FIBER BRAIDED COMPOSITES

D braiding technology has stimulated a great deal of interest in the world at large and been widely used in aerospace, military, civil construction and medical fields. Although 3 D braided composites have many good features, their features are very complicated. Optic fiber sensors can be multi braided into 3 D braided composites to fulfill a new kind of 3 D smart composites to monitor RTM process, study mechanical behaviors and damage states after molding, and monitor its own condition during service life. Since optic performances of optic fibers have direct and important relation to the performances of optic fiber sensors, experimental research is done to devise a method to incorporate the optic fiber into a 3 D structure. The optical performances of the braided optic fibers are tested and compared with the original one to study the optic performances of optic fibers, before their being braided into composites and after the RTM process.

Electrochemical performances of AB_5-type hydrogen storage alloy modified with Co_3O_4

Anodic electrodes with the mixture of hydrogen storage alloys and different contents of Co3O4（2%,4%,6% and 8%,mass fraction） powders were made.The effects of Co3O4 on the electrochemical performance of the alloy electrodes were studied.The constant charge-discharge tests show that the discharge capacity of alloy electrodes with Co3O4 significantly increases,and the maximum discharge capacities of electrodes with 2%,4%,6% and 8% Co3O4 are higher than the electrode with no Co3O4 by 0.83%,4.86%,7.18% and 9.21%,accordingly.Linear polarization（LP） and electrochemical impedance spectroscopy（EIS） tests suggest that charge-transfer resistance decreases by the addition of Co3O4.Cyclic voltammogram（CV）,scanning electron microscopy（SEM） and energy dispersive spectrum（EDS） tests indicate that Co3O4 can partly dissolve and experience a reversible oxidation-reduction process of Co to Co（OH）2,leading to the improvement in the electrochemical performance of hydrogen storage alloy.

Synthesis and electrochemical performances of LiCoO_2 recycled from the incisors bound of Li-ion batteries

A new LiCoO2 recovery technology for Li-ion batteries was studied in this paper. LiCoO2 was peeled from the Al foil with dimethyl acetamide （DMAC）, and then polyvinylidene fluoride （PVDF） and carbon powders in the active material were eliminated by high temperature calcining. Subsequently, Li2CO3, LiOH-H20 and LiAc-2H2O were added into the recycled powders to adjust the Li/Co molar ratio to 1.00. The new LiCoO2 was obtained by calcining the mixture at 850℃ for 12 h in air. The structure and morphology of the recycled powders and resulting samples were studied by XRD and SEM techniques, respectively. The layered structure of LiCoO2 synthesized by adding Li2CO3 is the best, and it is found to have the best characteristics as a cathode material in terms of charge-discharge capacity and cycling performance. The first discharge capacity is 160 mAh·g^-1 between 3.0-4.3 V. The discharge capacity after cycling for 50 times is still 145.2 mAh·g^-1.

Raising on Water Stocking Density Reduces Geese Reproductive Performances via Water Bacteria and Lipopolysaccharide Contaminations in “Geese-Fish” Production System

This study was carried out to unravel the mechanism of reductions in production performances in high stocking density geese flocks during summer months in ＂geese-fish＂ production system. Experiment 1 observed the water bacterial growth, lipopolysaccharde concentrations in water and geese blood, and geese reproductive performances from summer to winter, in two flocks with varying on water stocking densities. Results showed that counts of total bacteria, Escherichia coli and Salmonella in water, as well as water and geese plasma LPS concentrations, exhibited a tendency decreasing from the highest levels in summer, to intermediate levels in autumn, and to the lowest values in winter. Such seasonal decreases in bacteria and LPS concentrations were associated with similar seasonal decreases in embryo mortality during incubation. In addition, embryos dead or showing development retardation by day 25 of incubation contained copious LPS in allantoic fluid, in contrast to the negligible amount in normal developing embryos. Raising on water stocking density elevated bacteria counts, LPS concentrations in water and geese plasma, and decreased egg fertility but increased embryo mortality during incubation. In experiment 2, exogenous LPS treatment to the geese depressed egg laying, reduced egg hatchability, caused sickness behavior in the goslings hatched. In experiment 3, exogenous LPS directly administered to day 8 and 18 embryos during incubation dose dependently increased mortality and decreased hatchability, and caused sickness behavior in the goslings hatched. It is concluded that the raising on water geese stocking density stimulates pathogenic bacteria growth in water, which via LPS contamination impaires embryo development in incubation and therefore reduces geese reproductive performance and gosling quality during the hot summer months.