In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF)...In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF). The purpose of this design is to receive wireless charge for hearing aids and basically for any electronic device which is not required to a high energy for being setup. In this study, it has been demonstrated that as the amount of radio receiving energy increases, distance of receiver from antenna should be decreased;otherwise, either maximum amount of the receiving energy, or signal power density of the transmitter should be increased. Since it is impossible to be performed, it is decided to set up an energy receiving system constructed by rectenna and charge Circuit and to adjust their parameters to provide energy requirements for a device with low-power consumption. In this paper, different components of an energy receiving system from radio frequency band have been mentioned and a diagram block has been suggested. Subsequently, input impedance of designed antenna has been adjusted by provided relations. This impedance should be adjusted with the total impedance of regarded hearing aid Circuit by which the highest amount of received signal power is transferred to the battery of hearing aids. Received signal is converted to a dc voltage by rectifier diode. Finally, by applying a voltage regulator which has been designed using a common-collector amplifier not only the output voltage is kept constant, but the power is also strengthened. The battery of the hearing aids will be charged using the obtained power and voltage.展开更多
Information on hearing thresholds is not always reliable as differences in these thresholds have been described even for the same species. This may partially be due to different methods used by different labs. A frequ...Information on hearing thresholds is not always reliable as differences in these thresholds have been described even for the same species. This may partially be due to different methods used by different labs. A frequently used approach to obtain an estimate of hearing threshold is the electrophysiological recording of auditory brainstem responses (ABR). They are usually recorded under deep anesthesia and represent the auditory evoked far-field potentials at various levels in the central auditory pathway. Alternatively, several behavioral approaches are employed. These commonly use operant or classical conditioning to determine hearing thresholds. A potential disadvantage of these methods is that any sound conditioning may in principle alter auditory perception and therefore auditory thresholds. To exclude this type of methodological bias a prepulse inhibition (PPI) paradigm can be used where an audiogram can be determined without any kind of pre-training. Here we compare the threshold estimates obtained by two different ABR and PPI measurements where stimuli are presented in different contexts, either randomly or non-randomly, to test for a possible effect of auditory sensitization. In addition we test the effect of a frequency specific acoustic trauma on the audiograms obtained with both methods. In general we find behaviorally determined audiograms to be significantly lower in absolute thresh- old compared to ABR measurements. Furthermore non-randomized presentation context of the stimuli generally results in audiograms with 10 to 15 dB lower thresholds than pseudo-randomized presentation. Finally, the amount of threshold loss induced by acoustic trauma is similar for all methods tested.展开更多
An important concern with the deaf community is inability to hear partially or totally. This may affect the development of language during childhood, which limits their habitual existence. Consequently to facilitate s...An important concern with the deaf community is inability to hear partially or totally. This may affect the development of language during childhood, which limits their habitual existence. Consequently to facilitate such deaf speakers through certain assistive mechanism, an effort has been taken to understand the acoustic characteristics of deaf speakers by evaluating the territory specific utterances. Speech signals are acquired from 32 normal and 32 deaf speakers by uttering ten Indian native Tamil language words. The speech parameters like pitch, formants, signal-to-noise ratio, energy, intensity, jitter and shimmer are analyzed. From the results, it has been observed that the acoustic characteristics of deaf speakers differ significantly and their quantitative measure dominates the normal speakers for the words considered. The study also reveals that the informative part of speech in a normal and deaf speakers may be identified using the acoustic features. In addition, these attributes may be used for differential corrections of deaf speaker’s speech signal and facilitate listeners to understand the conveyed information.展开更多
文摘In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF). The purpose of this design is to receive wireless charge for hearing aids and basically for any electronic device which is not required to a high energy for being setup. In this study, it has been demonstrated that as the amount of radio receiving energy increases, distance of receiver from antenna should be decreased;otherwise, either maximum amount of the receiving energy, or signal power density of the transmitter should be increased. Since it is impossible to be performed, it is decided to set up an energy receiving system constructed by rectenna and charge Circuit and to adjust their parameters to provide energy requirements for a device with low-power consumption. In this paper, different components of an energy receiving system from radio frequency band have been mentioned and a diagram block has been suggested. Subsequently, input impedance of designed antenna has been adjusted by provided relations. This impedance should be adjusted with the total impedance of regarded hearing aid Circuit by which the highest amount of received signal power is transferred to the battery of hearing aids. Received signal is converted to a dc voltage by rectifier diode. Finally, by applying a voltage regulator which has been designed using a common-collector amplifier not only the output voltage is kept constant, but the power is also strengthened. The battery of the hearing aids will be charged using the obtained power and voltage.
文摘Information on hearing thresholds is not always reliable as differences in these thresholds have been described even for the same species. This may partially be due to different methods used by different labs. A frequently used approach to obtain an estimate of hearing threshold is the electrophysiological recording of auditory brainstem responses (ABR). They are usually recorded under deep anesthesia and represent the auditory evoked far-field potentials at various levels in the central auditory pathway. Alternatively, several behavioral approaches are employed. These commonly use operant or classical conditioning to determine hearing thresholds. A potential disadvantage of these methods is that any sound conditioning may in principle alter auditory perception and therefore auditory thresholds. To exclude this type of methodological bias a prepulse inhibition (PPI) paradigm can be used where an audiogram can be determined without any kind of pre-training. Here we compare the threshold estimates obtained by two different ABR and PPI measurements where stimuli are presented in different contexts, either randomly or non-randomly, to test for a possible effect of auditory sensitization. In addition we test the effect of a frequency specific acoustic trauma on the audiograms obtained with both methods. In general we find behaviorally determined audiograms to be significantly lower in absolute thresh- old compared to ABR measurements. Furthermore non-randomized presentation context of the stimuli generally results in audiograms with 10 to 15 dB lower thresholds than pseudo-randomized presentation. Finally, the amount of threshold loss induced by acoustic trauma is similar for all methods tested.
文摘An important concern with the deaf community is inability to hear partially or totally. This may affect the development of language during childhood, which limits their habitual existence. Consequently to facilitate such deaf speakers through certain assistive mechanism, an effort has been taken to understand the acoustic characteristics of deaf speakers by evaluating the territory specific utterances. Speech signals are acquired from 32 normal and 32 deaf speakers by uttering ten Indian native Tamil language words. The speech parameters like pitch, formants, signal-to-noise ratio, energy, intensity, jitter and shimmer are analyzed. From the results, it has been observed that the acoustic characteristics of deaf speakers differ significantly and their quantitative measure dominates the normal speakers for the words considered. The study also reveals that the informative part of speech in a normal and deaf speakers may be identified using the acoustic features. In addition, these attributes may be used for differential corrections of deaf speaker’s speech signal and facilitate listeners to understand the conveyed information.
