AIM:To present the 1-year results of a prospective cohort study investigating the efficacy,potential mechanism,and safety of orthokeratology(ortho-k)with different back optic zone diameters(BOZD)for myopia control in ...AIM:To present the 1-year results of a prospective cohort study investigating the efficacy,potential mechanism,and safety of orthokeratology(ortho-k)with different back optic zone diameters(BOZD)for myopia control in children.METHODS:This randomized clinical study was performed between Dec.2020 and Dec.2021.Participants were randomly assigned to three groups wearing ortho-k:5 mm BOZD(5-MM group),5.5 mm BOZD(5.5-MM group),and 6 mm BOZD(6-MM group).The 1-year data were recorded,including axial length,relative peripheral refraction(RPR,measured by multispectral refractive topography,MRT),and visual quality.The contrast sensitivity(CS)was evaluated by CSV-1000 instrument with spatial frequencies of 3,6,12,and 18 cycles/degree(c/d);the corneal higher-order aberrations(HOAs)were measured by iTrace aberration analyzer.The one-way ANOVA was performed to assess the differences between the three groups.The correlation between the change in AL and RPR was calculated by Pearson’s correlation coefficient.RESULTS:The 1-year results of 20,21,and 21 subjects in the 5-MM,5.5-MM,and 6-MM groups,respectively,were presented.There were no statistical differences in baseline age,sex,or ocular parameters between the three groups(all P>0.05).At the 1-year visit,the 5-MM group had lower axial elongation than the 6-MM group(0.07±0.09 vs 0.18±0.11 mm,P=0.001).The 5-MM group had more myopic total RPR(TRPR,P=0.014),with RPR in the 15°–30°(RPR 15–30,P=0.015),30°–45°(RPR 30–45,P=0.011),temporal(RPR-T,P=0.008),and nasal area(RPR-N,P<0.001)than the 6-MM group.RPR 15–30 in the 5.5-MM group was more myopic than that in the 6-MM group(P=0.002),and RPR-N in the 5-MM group was more myopic than that in the 5.5-MM group(P<0.001).There were positive correlations between the axial elongation and the change in TRPR(r=0.756,P<0.001),RPR 15–30(r=0.364,P=0.004),RPR 30–45(r=0.306,P=0.016),and RPR-N(r=0.253,P=0.047).The CS decreased at 3 c/d(P<0.001),and the corneal HOAs increased in the 5-MM group(P=0.030).CONCLUSION:Ortho-k with 5 mm BOZD can control myopia progression more effectively.The mechanism may be associated with greater myopic shifts in RPR.展开更多
Forming zone length (FZL) is a key parameter of the lead-clad glass fiber extrusion dies, and an unsuitable FZL will lead to breakage of the glass fiber and/or unacceptable geometric and metallographic qualities of th...Forming zone length (FZL) is a key parameter of the lead-clad glass fiber extrusion dies, and an unsuitable FZL will lead to breakage of the glass fiber and/or unacceptable geometric and metallographic qualities of the product. The optimal FZL was determined theoretically based on a mathematical model established by upper bound method, and accepted Pb-GF wire was actually obtained experimentally by symmetric side-feed extrusion at a much lower temperature than that published before. The wire has features of fine grains, uniform diameter, good coaxiality and satisfied mechanical property. The results and conclusions obtained in the research can be used to design the forming tools for lead-clad glass fiber extrusion and have significance to further research on the extrusion of other complex wires of metal-clad brittle core.展开更多
Since the impoundment of the Three Gorges Reservoir(TGR), the riparian zone has been subjected to numerous environmental changes. This study was conducted to recognize the distribution of grass roots and its impacts o...Since the impoundment of the Three Gorges Reservoir(TGR), the riparian zone has been subjected to numerous environmental changes. This study was conducted to recognize the distribution of grass roots and its impacts on soil nutrients in the water level fluctuation zone of TGR. Roots of four predominant herbaceous plants in the study area, specifically, Cynodon dactylon, Hemarthria altissima, Hemarthria compressa, and Paspalum paspaloides, and their corresponding relation with soil nutrient contents were investigated. Root surface area density was determined with Win RHIZO, and the relationships of root distribution with soil depths and soil nutrient contents were studied. The results indicates that most roots are distributed in the top soil layer of 0-10 cm. Estimated root surface area density for the selected grass species ranges from 0.16 to 13.44 cm^2/cm^3, and decreases exponentially with an increase in soil depth. Soil organic matter and total nitrogen contents are significantly lower on bare control area than the corresponding values on the grasslands. Total nutrient contents on grasslands of C. dactylon and H. compressa are higher than those of other grass areas. Root length density and root surface area density are significantly correlated with soil organic matter and total nitrogen content for the four grasslands. The present results suggests that plant roots have significant effects on the distribution of soil nutrients in soil profiles in the riparian zone along the TGR. Nevertheless, additional investigations are needed to reveal the specific interactions between plant roots distribution, soil nutrients and water level fluctuations.展开更多
Shaft development can be documented on the basis of comparative studies of specific shaft lengths and shaft patterns.We calculated the specific length of shafts and the average specific shaft length of the shafts in s...Shaft development can be documented on the basis of comparative studies of specific shaft lengths and shaft patterns.We calculated the specific length of shafts and the average specific shaft length of the shafts in some karst areas and we investigated the relation between the altitude of shaft floors and the specific shaft length.Taking the registered specific shaft lengths and the shaft patterns into consideration,it can be stated that some parts of the shafts developed paragenetically in the studied karst areas.In the Bakony Region,this was caused by surface water influx,rise of karst water level,and their simultaneous effect.As a result,shaft systems,bifurcating shafts and storeyed shafts developed.On glaciokarst areas,shafts may constitute a system with phreatic passages:either because a phreatic environment developed in the vadose zone due to the permanent impoundment of karst water or because a phreatic passage got into the vadose zone since the karst became elevated.On the studied karst areas,the following shaft development types are distinguished:glacial-high mountain surface flood development type(1),glacial-high mountain karst water and surface flood development type(2),glacial karst water and surface flood later phreatic development type(3),shaft with a passage that got into the vadose zone(4).展开更多
In three and six-axis free-bending equipment,the deformation zone length(A)is a fixed mechanical structure parameter modified when the relevant structure is redesigned and manufactured.In this study,a six degree of fr...In three and six-axis free-bending equipment,the deformation zone length(A)is a fixed mechanical structure parameter modified when the relevant structure is redesigned and manufactured.In this study,a six degree of freedom(6-DOF)parallel mechanism was used as the control mechanism of the bending die,and a new method of changing the deformation zone length(A)was proposed.Firstly,an idealized geometric model of free bending-based active motion was established.Then,the influence of the deformation zone length(A)on the bending moment and the bending radius of the tube was analyzed.In addition,the finite element simulation and a kinematic model of free bending-based active motion controlled by the 6-DOF parallel mechanism were established,and bending processes of the SS304 tube with different deformation zone lengths were investigated.Afterwards,the impact of the deformation zone length(A)on the bending radius,bending moment,wall thickness,and motion of the parallel mechanism were analyzed.Finally,experiments were carried out on the free-bending equipment based on the 6-DOF parallel mechanism.Experiments verified the rules in the theoretical analysis,finite element simulation,and kinematic simulation.展开更多
基金Supported by Education Department Foundation of Sichuan Province(No.15ZA0262).
文摘AIM:To present the 1-year results of a prospective cohort study investigating the efficacy,potential mechanism,and safety of orthokeratology(ortho-k)with different back optic zone diameters(BOZD)for myopia control in children.METHODS:This randomized clinical study was performed between Dec.2020 and Dec.2021.Participants were randomly assigned to three groups wearing ortho-k:5 mm BOZD(5-MM group),5.5 mm BOZD(5.5-MM group),and 6 mm BOZD(6-MM group).The 1-year data were recorded,including axial length,relative peripheral refraction(RPR,measured by multispectral refractive topography,MRT),and visual quality.The contrast sensitivity(CS)was evaluated by CSV-1000 instrument with spatial frequencies of 3,6,12,and 18 cycles/degree(c/d);the corneal higher-order aberrations(HOAs)were measured by iTrace aberration analyzer.The one-way ANOVA was performed to assess the differences between the three groups.The correlation between the change in AL and RPR was calculated by Pearson’s correlation coefficient.RESULTS:The 1-year results of 20,21,and 21 subjects in the 5-MM,5.5-MM,and 6-MM groups,respectively,were presented.There were no statistical differences in baseline age,sex,or ocular parameters between the three groups(all P>0.05).At the 1-year visit,the 5-MM group had lower axial elongation than the 6-MM group(0.07±0.09 vs 0.18±0.11 mm,P=0.001).The 5-MM group had more myopic total RPR(TRPR,P=0.014),with RPR in the 15°–30°(RPR 15–30,P=0.015),30°–45°(RPR 30–45,P=0.011),temporal(RPR-T,P=0.008),and nasal area(RPR-N,P<0.001)than the 6-MM group.RPR 15–30 in the 5.5-MM group was more myopic than that in the 6-MM group(P=0.002),and RPR-N in the 5-MM group was more myopic than that in the 5.5-MM group(P<0.001).There were positive correlations between the axial elongation and the change in TRPR(r=0.756,P<0.001),RPR 15–30(r=0.364,P=0.004),RPR 30–45(r=0.306,P=0.016),and RPR-N(r=0.253,P=0.047).The CS decreased at 3 c/d(P<0.001),and the corneal HOAs increased in the 5-MM group(P=0.030).CONCLUSION:Ortho-k with 5 mm BOZD can control myopia progression more effectively.The mechanism may be associated with greater myopic shifts in RPR.
文摘Forming zone length (FZL) is a key parameter of the lead-clad glass fiber extrusion dies, and an unsuitable FZL will lead to breakage of the glass fiber and/or unacceptable geometric and metallographic qualities of the product. The optimal FZL was determined theoretically based on a mathematical model established by upper bound method, and accepted Pb-GF wire was actually obtained experimentally by symmetric side-feed extrusion at a much lower temperature than that published before. The wire has features of fine grains, uniform diameter, good coaxiality and satisfied mechanical property. The results and conclusions obtained in the research can be used to design the forming tools for lead-clad glass fiber extrusion and have significance to further research on the extrusion of other complex wires of metal-clad brittle core.
基金the National Natural Science Foundation of China (Grant Nos.41601296,41571278 and 41771321)China Postdoctoral Science Foundation (Grant No.2016M592720)+1 种基金Applied Basic Research Foundation of Yunnan Province (Grant No.2016FD011)Sichuan Science and Technology Program (2018SZ0132)
文摘Since the impoundment of the Three Gorges Reservoir(TGR), the riparian zone has been subjected to numerous environmental changes. This study was conducted to recognize the distribution of grass roots and its impacts on soil nutrients in the water level fluctuation zone of TGR. Roots of four predominant herbaceous plants in the study area, specifically, Cynodon dactylon, Hemarthria altissima, Hemarthria compressa, and Paspalum paspaloides, and their corresponding relation with soil nutrient contents were investigated. Root surface area density was determined with Win RHIZO, and the relationships of root distribution with soil depths and soil nutrient contents were studied. The results indicates that most roots are distributed in the top soil layer of 0-10 cm. Estimated root surface area density for the selected grass species ranges from 0.16 to 13.44 cm^2/cm^3, and decreases exponentially with an increase in soil depth. Soil organic matter and total nitrogen contents are significantly lower on bare control area than the corresponding values on the grasslands. Total nutrient contents on grasslands of C. dactylon and H. compressa are higher than those of other grass areas. Root length density and root surface area density are significantly correlated with soil organic matter and total nitrogen content for the four grasslands. The present results suggests that plant roots have significant effects on the distribution of soil nutrients in soil profiles in the riparian zone along the TGR. Nevertheless, additional investigations are needed to reveal the specific interactions between plant roots distribution, soil nutrients and water level fluctuations.
文摘Shaft development can be documented on the basis of comparative studies of specific shaft lengths and shaft patterns.We calculated the specific length of shafts and the average specific shaft length of the shafts in some karst areas and we investigated the relation between the altitude of shaft floors and the specific shaft length.Taking the registered specific shaft lengths and the shaft patterns into consideration,it can be stated that some parts of the shafts developed paragenetically in the studied karst areas.In the Bakony Region,this was caused by surface water influx,rise of karst water level,and their simultaneous effect.As a result,shaft systems,bifurcating shafts and storeyed shafts developed.On glaciokarst areas,shafts may constitute a system with phreatic passages:either because a phreatic environment developed in the vadose zone due to the permanent impoundment of karst water or because a phreatic passage got into the vadose zone since the karst became elevated.On the studied karst areas,the following shaft development types are distinguished:glacial-high mountain surface flood development type(1),glacial-high mountain karst water and surface flood development type(2),glacial karst water and surface flood later phreatic development type(3),shaft with a passage that got into the vadose zone(4).
基金supported by the National Natural Science Foundation of China(Nos:U1937206,52175328,52105360)the Opening Project of State Key Lab of Digital Manufacturing Equipment&Technology(No.DMETKF2021004)+3 种基金Jiangsu Province Key Research and Development Project(No.BE2019007-2)Fundamental Research Funds for the Central Universities(No.NS2021046)Ningbo"science and technology innovation 2025"major special project(No.2020Z078)Natural Science Foundation of Jiangsu Province(No.BK20200453).
文摘In three and six-axis free-bending equipment,the deformation zone length(A)is a fixed mechanical structure parameter modified when the relevant structure is redesigned and manufactured.In this study,a six degree of freedom(6-DOF)parallel mechanism was used as the control mechanism of the bending die,and a new method of changing the deformation zone length(A)was proposed.Firstly,an idealized geometric model of free bending-based active motion was established.Then,the influence of the deformation zone length(A)on the bending moment and the bending radius of the tube was analyzed.In addition,the finite element simulation and a kinematic model of free bending-based active motion controlled by the 6-DOF parallel mechanism were established,and bending processes of the SS304 tube with different deformation zone lengths were investigated.Afterwards,the impact of the deformation zone length(A)on the bending radius,bending moment,wall thickness,and motion of the parallel mechanism were analyzed.Finally,experiments were carried out on the free-bending equipment based on the 6-DOF parallel mechanism.Experiments verified the rules in the theoretical analysis,finite element simulation,and kinematic simulation.
