Review of energy consumption research for papermaking industry based on life cycle analysis

Papermaking industry is a high-energy-consuming industry with long supply chain.The growth of paper product demand further intensifies the need of energy consumption.Energy saving through the full supply chain has become a focal point for long-term sustainable development of the papermaking industry.This paper reviews the advances in life cycle analysis for the papermaking industry in recent years.All the stages from the full supply chain are involved to give a panoramic overview of the papermaking industry.The object of this paper is to provide scientific basis to industry and decision-makers with profound understanding of the energy consumption and energy saving potential in a life cycle perspective.

Techno-Economic Analysis and Life Cycle Assessment for the Typical Intermediate Crude Refining Scheme in China

The integration of refinery and petrochemical units(IRPUs)has become an inevitable choice for the sustainable development of petrochemical industry.The utilization efficiency of petroleum resources could be improved obviously through IRPUs.However,integrating economic and environmental impacts into the model of IRPUs is still a grand challenge.Herein,a model called TEA-GHG-OPWM(Techno-Economic Analysis and GreenHouse Gases Oriented Plant-Wide Model)has been established on Aspen HYSYSTM platform to calculate the energy consumption,the technoeconomic performance,and the GHG emissions for two different kinds of schemes,viz,:VRHCU(Vacuum Residue Hydrocracking Unit)and VRDS-RFCC(Vacuum Residue Desulfurization and Residue Fluid Catalytic Cracking).Furthermore,a novel processing pathway named VGOHDT-HTMP-DC(Vacuum Gas Oil Hydrotreating,Hydrogenation and TMP coupling process and Delayed Coking)has also been developed to find methods to improve the economic performance based on a ten-million-CNY output value(TMYOV)and a reduced GHG emissions.Our results demonstrate that VRHCRU could consume more energy and emit more GHG(877.11 t of CO2 eq·TMYOV^-1·h^-1)than VRDS-RFCC(817.03 t of CO2 eq·TMYOV^-1·h^-1)and VGOHDT-HTMP-DC(721.96 t of CO2 eq·TMYOV^-1·h^-1),while obtaining a higher mass yield of petrochemicals.The VGOHDT-HTMP-DC process exhibits the lowest feedstock consumption,hydrogen consumption,energy consumption,and GHG emissions,indicating that VGOHDT-HTMP-DC has both well economic and environmentally friendly performance.

Life cycle cost analysis of new FRP based solar parabolic trough collector hot water generation system

Parabolic trough collectors (PTCs) are employed for a variety of applications including steam generation and hot water generation. This paper deals with the experimental results and an economic analysis of a new fibre reinforced plastic (FRP) based solar PTC with an embedded electronic controlled tracking system designed and developed for hot water generation in a restaurant in Madurai, India. The new collector performance has been tested according to ASHRAE Standard 93 (1986). The performance of a new PTC hot water generation system with a well mixed hot water storage tank is investigated by a series of extensive tests over ten months period. The average maximum storage tank water temperature observed was 74.91 °C, when no energy is withdrawn from the tank to the load during the collection period. The total cost of the new economic FRP based solar PTC for hot water generation with an embedded electronic controlled tracking system is Rs. 25000 (US$ 573) only. In the present work, life cycle savings (LCS) method is employed for a detailed economic analysis of the PTC system. A computer program is used as a tool for the economic analysis. The present worth of life cycle solar savings is evaluated for the new solar PTC hot water generation system that replaces an existing electric water heating system in the restaurant and attains a value of Rs. 23171.66 after 15 years, which is a significant saving. The LCS method and the MATLAB computer simulation program presented in this paper can be used to estimate the LCS of other renewable energy systems.

Uncertainty in life cycle economical analysis of cassava-based ethanol fuel

Biomass ethanol fuel is not only renewable but also environmental-friendly. Guangxi Zhuang Autonomous Region is developing the cassava-based ethanol fuel. Economical performance of the project is the key issue. The traditional life cycle economical analysis is just a static calculation process. Uncertainty is the character of cassava yield, cost of cassava plant, cassava price, tax rate and gasoline price, and the economical performance of the project is determined by these aspects. This study proposes an economical model of cassava-based ethanol fuel. The method of Monte Carol is used to simulate the economical performance. This method conquers the shortage of the traditional way. The results show that cassava-based ethanol fuel can get survived when the tax is exempted. Finally, the study also evaluates the potential of the economical performance.

基于LCA的长江上游某内河港口工程碳排放估算与分析

“十四五”期间“双碳”目标的提出,推动着我国基础设施建设向绿色低碳的方向发展,生命周期评价方法(LCA)作为一款全面的环境影响评价工具逐渐开始应用到我国建筑业。以生命周期评价理论为基础,选取长江上游某内河港口工程为研究对象,将该港口工程全生命周期划分为施工阶段、运维阶段及退役阶段进行碳排放来源分析并估算碳排放。结果表明,该港口工程全生命周期碳排放为8.67万t CO_(2)-eq(当量),施工阶段、运维阶段、退役阶段分别占比39.4%、56.7%、3.9%,单位碳排放为95%置信区间为651.92~745.21 kg CO_(2)-eq/m^(2),中位数为698.14 kg CO_(2)-eq/m^(2),清单数据不确定性较小,港口工程碳排放敏感因素为混凝土和电力。碳排放评价结果总体较好,可作为后续制定碳减排政策的相关依据。

Probabilistic Analysis of Life Cycle Cost for Power Transformer

The selection of power transformer is very important to power sector. Most methods are utilized according to the initial cost and don’t consider the synthetical evaluation of economy and technology. Based on previous research, this paper addresses a new practical probabilistic life cycle cost model. Then, in order to demonstrate the practicability of probabilistic life cycle cost for the power transformer, illustrative investment alternatives of actual power transformers are discussed. From the result of the numerical investigation, it may be positively stated that the optimum investment alternative for the power transformer based on the probabilistic life cycle cost model proposed in this study will lead to a more rational, economical and effective procedure compared with the conventional method only considering the initial cost.

零碳目标下临时木结构建筑降碳策略与LCA碳排放研究——以2024世园会企业展园为例

以2024年世园会成都设计咨询集团企业展馆为例,探讨了基于零碳目标下小型临时木结构建筑如何采取源头减碳、过程降碳、末端消碳等三方面的低碳优化策略,并基于LCA全生命周期评估方法对其进行碳排放核算研究,得出针对小型临时建筑,建材生产与加工环节对建筑全生命周期碳排放影响最大,占比约为50.30%~69.49%,其次是运行阶段,占比约为19.33%~30.91%。通过对比分析目标建筑与同体量的轻钢结构建筑,目标建筑在采取不同的措施下可实现减碳率约36.00%~68.41%,建筑全生命周期(5年)单位面积的碳排放量可降低至382 kgCO_(2)eq/m^(2)。研究得出临时建筑各阶段融入降碳策略的重要性和运用LCA方法评估建筑碳排放的必要性,除运行阶段外,临时建筑需更加关注低碳材料的替代与拆除阶段材料的回收利用,为未来实现零碳建筑目标提供了新的思路和实践参考。

Impact of Different Parameters on Life Cycle Analysis, Embodied Energy and Environmental Emissions for Wind Turbine System

Due to the rapid depletion of fossil fuel reserves and increasing concern for climate change as a result of greenhouse gas effect, every country is looking for ways to develop eco-friendly renewable energy sources. Wind energy has become a good option due to its comparative economic advantages and environment friendly aspects. But there is always an ongoing debate if wind energy is as green as it seems to appear. Wind turbines once installed do not produce any greenhouse gases during operation, but it can and may produce significant emissions during manufacture, transport, installation and disposal stages. To determine the exact amount of emissions, it is necessary to consider all the stages for a wind turbine from manufacture to disposal. Life Cycle Analysis (LCA) is a technique that determines the energy consumption, emission of greenhouse gases and other environmental impacts of a product or system throughout the life cycle stages. The various approaches that have been used in the literature for the LCA of wind turbines have many discrepancies among the results, the main reason(s) being different investigators used different parameters and boundary conditions, and thus comparisons are difficult. In this paper, the influence of different parameters such as turbine size, technology (geared or gearbox less), recycling, medium of transport, different locations, orientation of the blade (horizontal or vertical), blade material, positioning of wind turbine (land, coastal or offshore), etc. on greenhouse gas emissions and embodied energy is studied using the available data from exhaustive search of literature. This provides tools to find better solutions for power production in an environmental friendly manner by selecting a proper blade orientation technique, with suitable blade material, technology, recycling techniques and suitable location.

Importance of Life Cycle Analysis of the Printed Circuit Board Computer

It is estimated that there is a generation of 307,224 ton/year [1] of waste from electronic and electronic equipment (WEEE) in Mexico, of which 10% is recycled, 40% remains stored and 50% reaches landfills or uncontrolled dumps. In the practice, even the regulatory instruments are not consolidated and the adequate management of the use of WEEE management, so the aim of this study is an analysis of life cycle of printed circuit boards (TCI) to identify the management alternatives that represent the least impact to the environment. This assessment was carried out using software SIMAPRO to determine the environmental impact of each scenario, through the comparison of impacts and the proposed improvements to reduce it, following phases of this methodology by applying standards, ISO 14040/ISO 14044 [2], using data from the INE official reports since 2006 until 2010 which concentrate the information of the WEEE problem in Mexico. These data were pooled to carry out inventories according to the availability in the information, identifying the environmental impacts generated by processing. The conclusions of the LCA will serve to identify the stage with greater environmental impact, and thus propose ideas for improvement in order to minimize this impact.

The Environmental Impacts and Economic Benefits on Comprehensively Promoting Alternative Fuel Buses in China: Life-Cycle and Scenario Analysis Based on LEAP Model

With the continuous development of urban public transportation, the harmful GHG emissions and pollutants generated by itself and the consequent issues such as the losses of residents’ health, economic value and residents’ welfare have become the focus of social attention. In order to study the impacts of promoting new energy vehicles on public transportation pollution mitigation and residents’ health benefits, this paper adopts the LEAP model to build some scenarios that fulfill different development needs to quantitatively analyze the ownership of new energy buses, the reduction of pollutants and the losses of residents’ health welfare. It is concluded that promoting new energy buses comprehensively can significantly reduce the emissions of atmospheric pollutants and the economic losses of residents’ health, but cannot fully realize the targets of greenhouse gas reduction under Life Cycle Analysis.

基于LCA法评价铁尾矿资源化利用对环境的影响

为研究铁尾矿资源化利用所带来的环境影响,运用生命周期评价(LCA)法,基于终点损害模型对3种不同的铁尾矿资源化方案所产生的环境影响进行评价。对9种环境影响类型进行了评价,对气候变化、初级能源消耗、水资源消耗3种环境影响类型进行了灵敏度分析。研究结果表明:与传统方案相比,3种铁尾矿资源化利用方案均能降低对环境的影响程度。其中,方案1对气候变化影响最大的是CO_(2)的排放,方案2对初级能源消耗影响最大的是电力消耗,方案3对水资源消耗影响最大的为去离子水消耗。评估3种铁尾矿资源化利用的环境影响,为铁尾矿的高附加值利用提供理论依据。

基于LCA的2种餐厨垃圾处理工艺环境影响分析

文章采用生命周期评价(life cycle assessment,LCA)法,选择我国比较典型的餐厨垃圾处理方式厌氧消化工艺和厌氧消化-好氧堆肥组合处理工艺作为研究对象,并基于实际工程案例,评估并对比这2种工艺的环境影响。结果表明,厌氧消化工艺和厌氧消化-好氧堆肥组合工艺处理餐厨垃圾时的总环境影响潜值分别为4.88×10^(-12)、8.20×10^(-12),厌氧消化工艺的环境效益更好。敏感性分析表明,合理规划餐厨垃圾收运距离和降低能耗可有效降低处理工艺的环境影响。在排除生物CO_(2)的影响后,2种处理工艺的全球变暖环境影响指标均明显降低,其中厌氧消化-好氧堆肥组合工艺降幅更大。研究结果可为餐厨垃圾处理工艺的选择和优化提供参考。

Life Cycle Assessment of Recycling High-Density Polyethylene Plastic Waste

Increasing production and use of various novel plastics products,a low recycling rate,and lack of effective recycling/disposal methods have resulted in an exponential growth in plastic waste accumulation in landfills and in the environment.To better understand the effects of plastic waste,Life Cycle Analysis(LCA)was done to compare the effects of various production and disposal methods.LCA shows the specific effects of the cradle-to-grave or cradle-to-cradle scenarios for landfill,incineration,and mechanical recycling.The analysis clearly indicates that increasing recycling of plastics can significantly save energy and eliminate harmful emissions of various carcinogens and GHGs into the environment.As recycling increases,the need for virgin-plastic production can be greatly reduced.Furthermore,the results of this study may help improve current mechanical recycling processes as well as potential future recycling methods,such as chemical recycling.Concerns about the current recycling/disposal methods for plastics have brought increasing attention to the waste accumulation problem.However,with the current COVID-19 pandemic,plastic accumulation is expected to increase significantly in the near future.A better understanding of the quantitative effects of the various disposal methods can help guide policies and future research toward effective solutions of the plastic waste problem.

Life cycle environmental impact assessment of biochar-based bioenergy production and utilization in Northwestern Ontario,Canada

Biochar-based bioenergy production and sub- sequent land application of biochar can reduce greenhouse gas emissions by fixing atmospheric carbon into the soil for a long period of time. A thorough life cycle assessment of biochar-based bioenergy production and biochar land application in Northwestern Ontario is conducted using SimaPro Ver. 8.1. The results of energy consumption and potential environmental impact of biochar-based bioenergy production system are compared with those of conventional coal-based system. Results show that biocbar land application consumes 4847.61 MJ per tonne dry feedstock more energy than conventional system, but reduces the GHG emissions by 68.19 kg CO2e per tonne of dry feed- stock in its life cycle. Biochar land application improves ecosystem quality by 18 %, reduces climate change by 15 %, and resource use by 13 % but may adversely impact on human health by increasing disability adjusted life years by 1.7 % if biomass availability is low to medium. Replacing fossil fuel with woody biomass has a positiveimpact on the environment, as one tonne of dry biomass feedstock when converted to biochar reduces up to 38 kg CO2e with biochar land application despite using more energy. These results will help understand a comprehensive picture of the new interventions in forestry businesses, which are promoting biochar-based bioenergy production.

RELIABILITY ANALYSIS FOR AN AERO ENGINE TURBINE DISK UNDER LOW CYCLE FATIGUE CONDITION

Reliability analysis methods based on the linear damage accumulation law (LDAL) and load-life interference model are studied in this paper. According to the equal probability rule, the equivalent loads are derived, and the reliability analysis method based on load-life interference model and recurrence formula is constructed. In conjunction with finite element analysis (FEA) program, the reliability of an aero engine turbine disk under low cycle fatigue (LCF) condition has been analyzed. The results show the turbine disk is safety and the above reliability analysis methods are feasible.

Life cycle assessment in the environmental impact evaluation of urbandevelopment--a case study of land readjustment project,Hyogo District, Japan

In this paper, the Life Cycle of Urban Development was firstly analyzed, and the phases of Life Cycle Assessment applied to Urban Development (ULCA) were described. As a case study, ULCA was applied in the environmental impact assessment of the land readjustment project of Hyogo District of Saga, Japan. In addition, mitigation proposals for reducing CO2 were also presented and the relevant environmental ef-fects were simulated.

Life cycle assessment of mobile phone housing

The life cycle assessment of the mobile phone housing in Motorola(China) Electronics Ltd. was carried out, in which materials flows and environmental emissions based on a basic production scheme were analyzed and assessed. In the manufacturing stage, such primary processes as polycarbonate molding and surface painting are included, whereas different surface finishing technologies like normal painting, electroplate, IMD and VDM etc. were assessed. The results showed that housing decoration plays a significant role within the housing life cycle. The most significant environmental impact from housing production is the photochemical ozone formation potential. Environmental impacts of different decoration techniques varied widely, for example, the electroplating technique is more environmentally friendly than VDM. VDM consumes much more energy and raw material. In addition, the results of two alternative scenarios of dematerialization showed that material flow analysis and assessment is very important and valuable in selecting an environmentally friendly process.

Life Cycle Assessment of Creosote-Treated Wooden Railroad Crossties in the US with Comparisons to Concrete and Plastic Composite Railroad Crossties

Creosote-treated wooden railroad crossties have been used for more than a century to support steel rails and to transfer load from the rails to the underlying ballast while keeping the rails at the correct gauge. As transportation engineers look for improved service life and environmental performance in railway systems, alternatives to the creosote-treated wooden crosstie are being considered. This paper compares the cradle-to-grave environmental life cycle assessment (LCA) results of creosote-treated wooden railroad crossties with the primary alternative products: concrete and plastic composite (P/C) crossties. This LCA includes a life cycle inventory (LCI) to catalogue the input and output data from crosstie manufacture, service life, and disposition, and a life cycle impact assessment (LCIA) to evaluate greenhouse gas (GHG) emissions, fossil fuel and water use, and emissions with the potential to cause acidification, smog, ecotoxicity, and eutrophication. Comparisons of the products are made at a functional unit of 1.61 kilometers (1.0 mile) of rail-road track per year. This LCA finds that the manufacture, use, and disposition of creosote-treated wooden railroad crossties offers lower fossil fuel and water use and lesser environmental impacts than competing products manufactured of concrete and P/C.

Life Cycle Assessment of CCA-Treated Wood Highway Guard Rail Posts in the US with Comparisons to Galvanized Steel Guard Rail Posts

A cradle-to-grave life cycle assessment is done to identify the environmental impacts of chromated copper arsenate (CCA)-treated timber used for highway guard rail posts, to understand the processes that contribute to the total impacts, and to determine how the impacts compare to the primary alternative product, galvanized steel posts. Guard rail posts are the supporting structures for highway guard rails. Transportation engineers, as well as public and regulatory interests, have increasing need to understand the environmental implications of guard rail post selection, in addition to factors such as costs and service performance. This study uses a life cycle inventory (LCI) to catalogue the input and output data from guard rail post manufacture, service life, and disposition, and a life cycle impact assessment (LCIA) to assess anthropogenic and net greenhouse gas (GHG), acidification, smog, ecotoxicity, and eutrophication potentially resulting from life cycle air emissions. Other indicators of interest also are tracked, such as fossil fuel and water use. Comparisons of guard rail post products are made at a functional unit of one post per year of service. This life cycle assessment (LCA) finds that the manufacture, use, and disposition of CCA-treated wood guard rails offers lower fossil fuel use and lower anthropogenic and net GHG emissions, acidification, smog potential, and ecotoxicity environmental impacts than impact indicator values for galvanized steel posts. Water use and eutrophication impact indicator values for CCA-treated guard rail posts are greater than impact indicator values for galvanized steel guard rail posts.