Reliability-based life-cycle cost seismic design optimization of coastal bridge piers with nonuniform corrosion using different materials

Reinforcement corrosion is the main cause of performance deterioration of reinforced concrete(RC)structures.Limited research has been performed to investigate the life-cycle cost(LCC)of coastal bridge piers with nonuniform corrosion using different materials.In this study,a reliability-based design optimization(RBDO)procedure is improved for the design of coastal bridge piers using six groups of commonly used materials,i.e.,normal performance concrete(NPC)with black steel(BS)rebar,high strength steel(HSS)rebar,epoxy coated(EC)rebar,and stainless steel(SS)rebar(named NPC-BS,NPC-HSS,NPC-EC,and NPC-SS,respectively),NPC with BS with silane soakage on the pier surface(named NPC-Silane),and high-performance concrete(HPC)with BS rebar(named HPC-BS).First,the RBDO procedure is improved for the design optimization of coastal bridge piers,and a bridge is selected to illustrate the procedure.Then,reliability analysis of the pier designed with each group of materials is carried out to obtain the time-dependent reliability in terms of the ultimate and serviceability performances.Next,the repair time of the pier is predicted based on the time-dependent reliability indices.Finally,the time-dependent LCCs for the pier are obtained for the selection of the optimal design.

Characterization and evaluation of brittleness of deep bedded sandstone from the perspective of the whole life-cycle evolution process

The quantitative determination and evaluation of rock brittleness are crucial for the estimation of excavation efficiency and the improvement of hydraulic fracturing efficiency.Therefore,a“three-stage”triaxial loading and unloading stress path is designed and proposed.Subsequently,six brittleness indices are selected.In addition,the evolution characteristics of the six brittleness indices selected are characterized based on the bedding effect and the effect of confining pressure.Then,the entropy weight method(EWM)is introduced to assign weight to the six brittleness indices,and the comprehensive brittleness index Bcis defined and evaluated.Next,the new brittleness classification standard is determined,and the brittleness differences between the two stress paths are quantified.Finally,compared with the previous evaluation methods,the rationality of the proposed comprehensive brittleness index Bcis also verified.These results indicate that the proposed brittleness index Bccan reflect the brittle characteristics of deep bedded sandstone from the perspective of the whole life-cycle evolution process.Accordingly,the method proposed seems to offer reliable evaluations of the brittleness of deep bedded sandstone in deep engineering practices,although further validation is necessary.

A Blockchain-Based Life-Cycle Environmental Management Framework for Hospitals in the COVID-19 Context

During the coronavirus disease 2019 (COVID-19) emergency, many hospitals were built or renovated around the world to meet the challenges posed by the rising number of infected cases. Environmental management in the hospital life cycle is vital in preventing nosocomial infection and includes many infection control procedures. In certain urgent situations, a hospital must be completed quickly, and work process approval and supervision must therefore be accelerated. Thus, many works cannot be checked in detail. This results in a lack of work liability control and increases the difficulty of ensuring the fulfillment of key infection prevention measures. This study investigates how blockchain technology can transform the work quality inspection workflow to assist in nosocomial infection control under a fast delivery requirement. A blockchain-based life-cycle environmental management framework is proposed to track the fulfillment of crucial infection control measures in the design, construction, and operation stages of hospitals. The proposed framework allows for work quality checking after the work is completed, when some work cannot be checked on time. Illustrative use cases are selected to demonstrate the capabilities of the developed solution. This study provides new insights into applying blockchain technology to address the challenge of environmental management brought by rapid delivery requirements.

Development of a new cerebral ischemia reperfusion model of Mongolian gerbils and standardized evaluation system

Background:The Mongolian gerbil is an excellent laboratory animal for preparing the cerebral ischemia model due to its inherent deficiency in the circle of Willis.However,the low incidence and unpredictability of symptoms are caused by numerous complex variant types of the circle.Additionally,the lack of an evaluation system for the cer-ebral ischemia/reperfusion(I/R)model of gerbils has shackled the application of this model.Methods:We created a symptom-oriented principle and detailed neurobehavioral scoring criteria.At different time points of reperfusion,we analyzed the alteration in locomotion by rotarod test and grip force score,infarct volume by triphenyltetrazo-lium chloride(TTC)staining,neuron loss using Nissl staining,and histological charac-teristics using hematoxylin-eosin(H&E)straining.Results:With a successful model rate of 56%,32 of the 57 gerbils operated by our method harbored typical features of cerebral I/R injury,and the mortality rate in the male gerbils was significantly higher than that in the female gerbils.The suc-cessfully prepared I/R gerbils demonstrated a significant reduction in motility and grip strength at 1 day after reperfusion;formed obvious infarction;exhibited typi-cal pathological features,such as tissue edema,neuronal atrophy and death,and vacuolated structures;and were partially recovered with the extension of reperfu-sion time.Conclusion:This study developed a new method for the unilateral common carotid artery ligation I/R model of gerbil and established a standardized evaluation system for this model,which could provide a new cerebral I/R model of gerbils with more practical applications.

The impact of the Rural Minimum Living Standard Guarantee(Rural Dibao)Program on child nutrition outcomes

The Rural Minimum Living Standard Guarantee(Rural Dibao)is an important unconditional cash transfer program to alleviate poverty in rural China.Despite the importance of children’s nutrition in breaking poverty cycles,little is known about the impact of Rural Dibao on child nutrition outcomes.Using China Family Panel Studies(CFPS),this paper examines the effects of Rural Dibao on child nutrition outcomes and investigates potential pathways and heterogeneous effects.We exploit propensity score matching and difference-in-differences techniques to evaluate the effects of the Rural Dibao program on child nutrition outcomes.Our results suggest that Rural Dibao significantly impacts the nutrition outcomes of children up to 15 years of age.Specifically,our results suggest that Rural Dibao improves child height-to-age z-scores by 1.05 standard deviations and lowers the probability of stunting by 11.9 percentage points.Additional analyses suggest that increased protein intake is the main pathway through which Rural Dibao participation contributes to better nutrition outcomes.We also find that the effect of the program is more pronounced among girls,children who are non-left-behind or live with highly educated mothers,and those from low-income families and poor areas.Our findings suggest that Rural Dibao participation helps improve child nutrition outcomes through improving diet quality.

Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

Standardized ileal digestibility of amino acids in soybean meal fed to non-pregnant and pregnant sows

Background Two studies were designed to determine standard ileal crude protein(CP)and amino acid(AA)digestibility of soybean meal(SBM)from different origins fed to non-pregnant and pregnant sows.Seven solvent-extracted SBMs from soybeans produced in the USA,Brazil,and China were selected.In Exp.1,eight different diets were created:a nitrogen(N)-free diet and 7 experimental diets containing SBM from different origins as the only N source.Eight non-pregnant,multiparous sows were arranged in an 8×8 Latin square design(8 periods and 8 diets).In Exp.2,the diet formula was the same as in Exp.1.Eight gestating sows(parity 3)were assigned to 4 different diets in a replicated 4×3 Youden square design(three periods and four diets)in mid-gestation and again in late-gestation stages.Results When fed to non-pregnant and late-gestating sows,the standardized ileal digestibility(SID)of CP and most AAs from different SBM were not significantly different(P>0.05).When fed to mid-gestating sows,the SID values for Arg,His,Lys,Phe,Cys,Gly,Ser,and Tyr in SBM 1 were lower than in SBM 4 and 5(P<0.05),whereas SID for Leu from SBM 5 was higher than in SBM 1 and 4(P<0.05).SID values for Ile,Ala,and Asp from SBM 4 were lower than in SBM 1 and 5(P<0.05).Sows had significantly greater SID values for Lys,Ala,and Asp during mid-gestation when compared with late-gestation stages(P<0.05).Mid-gestating sows had greater SID value for Val and lower SID value for Tyr when compared with non-pregnant and late-gestating sows(P<0.01),whereas non-pregnant sows had significantly greater SID value for Met when compared with gestating sows(P<0.01).Conclusions When fed to mid-gestating sows,the SID values for most AAs varied among SBM samples.The SID values for Lys,Met,Val,Ala,Asp,and Tyr in SBM were affected by sow gestation stages.Our findings provide a cornerstone for accurate SBM use in sow diets.

Research on batch multielement rapid quantitative analysis based on the standard curve-assisted calibration-free laserinduced breakdown spectroscopy method

This study proposes a batch rapid quantitative analysis method for multiple elements by combining the advantages of standard curve(SC)and calibration-free laser-induced breakdown spectroscopy(CF-LIBS)technology to achieve synchronous,rapid,and accurate measurement of elements in a large number of samples,namely,SC-assisted CF-LIBS.Al alloy standard samples,divided into calibration and test samples,were applied to validate the proposed method.SC was built based on the characteristic line of Pb and Cr in the calibration sample,and the contents of Pb and Cr in the test sample were calculated with relative errors of 6%and 4%,respectively.SC built using Cr with multiple characteristic lines yielded better calculation results.The relative contents of ten elements in the test sample were calculated using CF-LIBS.Subsequently,the SC-assisted CF-LIBS was executed,with the majority of the calculation relative errors falling within the range of 2%-5%.Finally,the Al and Na contents of the Al alloy were predicted.The results demonstrate that it effectively enables the rapid and accurate quantitative analysis of multiple elements after a single-element SC analysis of the tested samples.Furthermore,this quantitative analysis method was successfully applied to soil and Astragalus samples,realizing an accurate calculation of the contents of multiple elements.Thus,it is important to advance the LIBS quantitative analysis and its related applications.

Combination Activity of Standard Antituberculosis Drugs and Extracts of Medicinal Plants Commonly Used in Traditional Treatment of Tuberculosis in Uganda

Introduction: Resistance to antituberculosis drugs and adverse drug reactions remain the leading causes of tuberculosis therapeutic failure globally. Despite the increasing acceptance of medicinal plant use in combination with conventional antituberculosis drugs in treatment of tuberculosis (TB) in Uganda, there is paucity of knowledge on their combination effect. Aim: This research aimed to determine combination activity of standard antituberculosis drugs with extracts of Zanthoxylum leprieurii Guill. & Perr. and Rubia cordifolia L., the two common antituberculosis medicinal plants in Uganda, against pansensitive (H37Rv) and multi-drug resistant (MDR) Mycobacterium tuberculosis strains. Materials and Methods: Two reference MTB strains (H37Rv and MDR strain) were inoculated on Middlebrook 7H11 medium containing a combination of standard antituberculosis drugs and methanol extracts of Z. leprieurii and R. cordifolia at varying concentrations. The number of colonies on the plates was observed and counted weekly for up to 8 weeks. In vitro combination activity was determined using proportion method. Mean percentage inhibition was calculated for the reduction of number of colonies on drug-extract combination medium in relation to drug-extract-free control medium. Results: Drug-extract combinations showed good combination activity against Mycobacterium tuberculosis strains when compared with individual standard anti-TB drugs. This was more exhibited against MDR strain. There was however a reduction in percentage inhibition when extracts were combined with ethambutol and streptomycin against H37Rv strain. Conclusions: Zanthoxylum leprieurii and Rubia cordifolia in combination with standard anti-TB drugs exhibited increased in vitro activity against Mycobacterium tuberculosis, especially MDR-TB strain. This justifies the local use of these plants in traditional treatment of tuberculosis especially in resistant cases in Uganda.

College students compete in the National Standardization Olympiad

The finals of the “Mo Gan Shan” National Standardization Olympiad of College Students were held on October 12-13 in Huzhou city, Southeast China's Zhejiang province.The competition was guided by SAMR, and hosted by the China Association for Standardization(CAS), China Jiliang University, and the National Standardization League of Universities. Themed “Standards lead the future, innovation fulfills dreams”, the competition aims to stimulate college students' interest and enthusiasm for standardization knowledge, and cultivate standardization talents with international vision and innovation capability.

Standardization of meibomian gland dysfunction in an Egyptian population sample using a non-contact meibography technique

AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Observational,cross-sectional,analytic study,in which 104 Egyptian volunteers were included.Both upper lids were examined,using“Sirius CSO”machine.Each eyelid was given a degree of meibomian gland loss(MGL),which was calculated by the software of the machine.RESULTS:Mean percentage MGL in right upper lid was of 30.9%±12.6%,and that of left upper lid was 32.6%±11.8%.Thirty-four volunteers(32.7%)had first-degree MGL in their right upper lid,and 67.3%had second-degree loss.One volunteer(1%)had zero-degree MGL in left upper lid,28(26.9%)had first-degree loss,and 75(72.1%)had second-degree loss.Degree of MGL in right upper eyelid was not related to age,but degree of MGL in left upper eyelid increased with age.There was statistically significant difference between both genders for degree of MGL in right eye(P=0.036)and in left eye(P=0.027).CONCLUSION:Noncontact meibography is a useful non-invasive tool for diagnosing MGL.MGL is diagnosed in 100%of apparently normal individuals;26.9%-32.7%of which have first-degree MGL,and 67.3%-72.1%have second-degree MGL.

Analysis of standardization development of TCM in Sichuan

Sichuan province is home to rich traditional Chinese medicine(TCM)resources.Recent years have seen unremitting efforts of TCM standardization in the province.By analyzing the measures and existing problems,this paper provides recommendations to boost TCM development through standardization.

PDE Standardization Analysis and Solution of TypicalMechanics Problems

A numerical approach is an effective means of solving boundary value problems(BVPs).This study focuses on physical problems with general partial differential equations(PDEs).It investigates the solution approach through the standard forms of the PDE module in COMSOL.Two typical mechanics problems are exemplified:The deflection of a thin plate,which can be addressed with the dedicated finite element module,and the stress of a pure bending beamthat cannot be tackled.The procedure for the two problems regarding the three standard forms required by the PDE module is detailed.The results were in good agreement with the literature,indicating that the PDE module provides a promising means to solve complex PDEs,especially for those a dedicated finite element module has yet to be developed.

Pudong’s experience of standardization mechanism innovation

The Pudong New Area has followed the standardization polices of the country,vigorously implemented the standardization strategies,and fulfilled the historical mission of“serving as a pioneer of reform&opening-up and innovative development”.

Constructing a standard system of city sustainable development assessment technology based on the SDGs

Given the rapid development of China’s new urbanization,cities with different locations and varying functional positioning,resource endowments,and development stages have insufficient scientific and applicable technical tools for implementing the United Nations Sustainable Development Goals(SDGs).City managers and policymakers must urgently establish SDG benchmarks to diagnose city development.Moreover,successful experiences from similar cities regarding sustainable development and self-improvement must be learned from to promote diversified,sustainable development across the country.Furthermore,emerging technologies such as artificial intelligence,the Internet of Things,big data and 5G are widely used in smart cities.Therefore,there is a growing need for“knowledge-based,personalized and intelligent”technologies to support monitoring,evaluation,and decision-making processes facilitating sustainable development in cities.This paper uses standardization as the theoretical support and technical basis.This approach can help clarify the sustainable development processes in China and clarify the evaluation results of and provide data on horizontal city comparisons,which can be used to develop evaluation technology for sustainable development in cities and construct a standardized system.The results provide a standard framework for intelligent assessment and decision-making regarding cities’sustainable development capabilities in China.Evaluating major international standardization institutions reveals that the practices of Chinese national standards should be fully absorbed and integrated to guide the evaluation of smart,resilient,and low-carbon cities.To this end,an indicator library of city sustainable development is proposed to provide standard evaluation technology methods.Finally,analyzing the response relationship of the indicator library to SDGs reveals the need for a standardized knowledge map of sustainable development assessment techniques and methods from the perspective of integrated management for sustainable development in cities.

ETSI-ITU Symposium on ICT Sustainability:Standards Driving Environmental Innovation

The symposium will bring together industry leaders,policymakers,researchers and stakeholders to explore the crucial role of standards in promoting sustainable ICT practices.Standards guide the development of technologies that minimize environmental impact and enhance energy efficiency.

Dialogue on standards:directions and difficulties of standardization discipline construction

To probe into the directions and difficulties of standardization discipline construction in China,China Standardization Press organized a pertinent dialogue on July 10.During the event,Yu Xinli,President of China Association for Standardization,was invited as the moderator.Several standardization experts including Song Mingshun,Mai Lyubo,Qiang Yi,Cao Lili,and Huang Manxue from the China Standardization Expert Committee and renowned universities and research institutes in the country were invited as guests to give their insightful views.

Post competency training in standardized training of resident physicians and integrated postgraduates

We focus on the importance and necessity of post-competency-based training in medical education alongside its current challenges and opportunities.Integrating post competency training into standardized educational frameworks is increasingly recognized as a critical component of preparing residents and postgraduates for real-world clinical practice.Post competency training represents a commitment to excellence in medical education,striving to produce competent,skilled practitioners to meet the challenges of modern healthcare.

Analysis of standardization of community security fund management-Taking practice of community security fund management in Wuhou district of Chengdu as an example

The Chengdu community security funds refer to the special security funds for urban and rural community development and governance in Chengdu.At present,there are some problems in the use of community security funds,such as low participation of residents,and low efficiency of fund use.Taking the exploration of standardization of community security fund management in Wuhou district,Chengdu city,as an example,this paper suggests further strengthening the use and management of community security funds by means of standardization,ensuring the democratic,open,and transparent use of funds,and effectively enhancing the supporting role of community security funds in community governance.

Workshop on driving inclusiveness in standardization

With the support of the Belgian FPS Economy,SBS and CEN-CENELEC are co-organizing the workshop,under the High-Level Forum on European standardization(HLF)and its workstream on inclusiveness in national standardization,to tackle issues of access and participation in standardization at the national level and discuss and promote best practices.