STUDY ON BINDING MODE OF CISPLATIN TO F-ACTIN ON THE BASIS OF LIGAND-METAL CHARGE TRANSFER SPECTRA

The binding mode and configuration of cisplatin with F-actin were studied on the basis of charge transfer bands of cisplatin-F-actin complex The binding mode was discussed on the basis of the results of LMCT.Raman and fluorescence spectra.

Influence of O-O formation pathways and charge transfer mediator on lipid bilayer membrane-like photoanodes for water oxidation

Inspired by the function of crucial components in photosystemⅡ(PSⅡ),electrochemical and dyesensitized photoelectrochemical(DSPEC)water oxidation devices were constructed by the selfassembly of well-designed amphipathic Ru(bda)-based catalysts(bda=2,2'-bipyrdine-6,6'-dicarbonoxyl acid)and aliphatic chain decorated electrode surfaces,forming lipid bilayer membrane(LBM)-like structures.The Ru(bda)catalysts on electrode-supported LBM films demonstrated remarkable water oxidation performance with different O-O formation mechanisms.However,compared to the slow charge transfer process,the O-O formation pathways did not determine the PEC water oxidation efficiency of the dyesensitized photoanodes,and the different reaction rates for similar catalysts with different catalytic paths did not determine the PEC performance of the DSPECs.Instead,charge transfer plays a decisive role in the PEC water oxidation rate.When an indolo[3,2-b]carbazole derivative was introduced between the Ru(bda)catalysts and aliphatic chain-modified photosensitizer in LBM films,serving as a charge transfer mediator for the tyrosine-histidine pair in PSⅡ,the PEC water oxidation performance of the corresponding photoanodes was dramatically enhanced.

High-Efficiency Photo-Induced Charge Transfer for SERS Sensing in N-Doped 3D-Graphene on Si Heterojunction

Nitrogen-doped three-dimensional graphene(N-doped 3D-graphene)is a graphene derivative with excellent adsorption capacity,large specific surface area,high porosity,and optoelectronic properties.Herein,N-doped 3D-graphene/Si heterojunctions were grown in situ directly on silicon(Si)substrates via plasma-assisted chemical vapor deposition(PACVD),which is promising for surface-enhanced Raman scattering(SERS)substrates candidates.Combined analyses of theoretical simulation,incorporating N atoms in 3D-graphene are beneficial to increase the electronic state density of the system and enhance the charge transfer between the substrate and the target molecules.The enhancement of the optical and electric fields benefits from the stronger light-matter interaction improved by the natural nano-resonator structure of N-doped 3D-graphene.The as-prepared SERS substrates based on N-doped 3D-graphene/Si heterojunctions achieve ultra-low detection for various molecules:10^(-8)M for methylene blue(MB)and 10^(-9)M for crystal violet(CRV)with rhodamine(R6G)of 10^(10)M.In practical detected,10^(-8)M thiram was precisely detected in apple peel extract.The results indicate that N-doped 3D-graphene/Si heterojunctions based-SERS substrates have promising applications in low-concentration molecular detection and food safety.

Reversed charge transfer induced by nickel in Fe-Ni/Mo_(2)C@nitrogen-doped carbon nanobox for promoted reversible oxygen electrocatalysis

The interaction between metal and support is critical in oxygen catalysis as it governs the charge transfer between these two entities,influences the electronic structures of the supported metal,affects the adsorption energies of reaction intermediates,and ultimately impacts the catalytic performance.In this study,we discovered a unique charge transfer reversal phenomenon in a metal/carbon nanohybrid system.Specifically,electrons were transferred from the metal-based species to N-doped carbon,while the carbon support reciprocally donated electrons to the metal domain upon the introduction of nickel.This led to the exceptional electrocatalytic performances of the resulting Ni-Fe/Mo_(2)C@nitrogen-doped carbon catalyst,with a half-wave potential of 0.91 V towards oxygen reduction reaction(ORR)and a low overpotential of 290 m V at 10 mA cm^(-2)towards oxygen evolution reaction(OER)under alkaline conditions.Additionally,the Fe-Ni/Mo_(2)C@carbon heterojunction catalyst demonstrated high specific capacity(794 mA h g_(Zn)~(-1))and excellent cycling stability(200 h)in a Zn-air battery.Theoretical calculations revealed that Mo_(2)C effectively inhibited charge transfer from Fe to the support,while secondary doping of Ni induced a charge transfer reversal,resulting in electron accumulation in the Fe-Ni alloy region.This local electronic structure modulation significantly reduced energy barriers in the oxygen catalysis process,enhancing the catalytic efficiency of both ORR and OER.Consequently,our findings underscore the potential of manipulating charge transfer reversal between the metal and support as a promising strategy for developing highly-active and durable bi-functional oxygen electrodes.

Modulating charge separation and transfer for high-performance photoelectrodes via built-in electric field

Constructing a built-in electric field has emerged as a key strategy for enhancing charge separation and transfer,thereby improving photoelectrochemical performance.Recently,considerable efforts have been devoted to this endeavor.This review systematically summarizes the impact of built-in electric fields on enhancing charge separation and transfer mechanisms,focusing on the modulation of built-in electric fields in terms of depth and orderliness.First,mechanisms and tuning strategies for built-in electric fields are explored.Then,the state-of-the-art works regarding built-in electric fields for modulating charge separation and transfer are summarized and categorized according to surface and interface depth.Finally,current strategies for constructing bulk built-in electric fields in photoelectrodes are explored,and insights into future developments for enhancing charge separation and transfer in high-performance photoelectrochemical applications are provided.

Decouple charge transfer reactions in the Li-ion battery

In the development of Li-ion batteries(LIBs)with high energy/power density,long cycle-life,fast charging,and high safety,an insight into charge transfer reactions is required.Although electrochemical impedance spectroscopy(EIS)is regarded as a powerful diagnosis tool,it is not a direct but an indirect measurement.With respect to this,some critical questions need to be answered:(i)why EIS can reflect the kinetics of charge transfer reactions;(ii)what the inherent logical relationship between impedance models under different physical scenes is;(iii)how charge transfer reactions compete with each other at multiple scales.This work aims at answering these questions via developing a theory framework so as to mitigate the blindness and uncertainty in unveiling charge transfer reactions in LIBs.To systematically answer the above questions,this article is organized into a three-in-one(review,tutorial,and research)type and the following contributions are made:(i)a brief review is given for impedance model development of the LIBs over the past half century;(ii)an open source code toolbox is developed based on the unified impedance model;(iii)the competive mechanisms of charge transfer reactions are unveiled based on the developed EIS-Toolbox@LIB.This work not only clarifies theoretical fundamentals,but also provides an easy-to-use open source code for EIS-Toolbox@LIB to optimize fast charge/discharge,mitigate cycle aging,and improve energy/power density.

First-Principles Investigation of Charge Transfer Mechanism of B-Doped 3C-SiC Semiconductor Material

This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% impurity concentration. Our comprehensive analysis encompasses structural properties, electronic band structures, and charge density distributions. The optimized lattice constant and band gap energy of 3C-SiC were found to be 4.373 Å and 1.36 eV respectively, which is in agreement with previous research (Bui, 2012;Muchiri et al., 2018). Our results show that B doping narrows the band gap, enhances electrical conductivity, and influences charge transfer interactions. The charge density analysis reveals substantial interactions between B dopants and surrounding carbon atoms. This work not only enhances our understanding of the material’s electronic properties, but also highlights the importance of charge density analysis for characterizing charge transfer mechanisms and their implications in the 3C-SiC semiconductors.

Recent advances in high charge density triboelectric nanogenerators

Triboelectric materials with high charge density are the building-block for the commercial application of triboelectric nanogenerators(TENGs).Unstable dynamic processes influence the change of the charge density on the surface and inside of triboelectric materials.The charge density of triboelectric materials depends on the surface and the internal charge transfer processes.The focus of this review is on recent advances in high charge density triboelectric materials and advances in the fabrication of TENGs.We summarize the existing strategies for achieving high charge density in triboelectric materials as well as their fundamental properties.We then review current optimization methods for regulating dynamic charge transfer processes to increase the output charge density:first,increasing charge injection and limiting charge dissipation to achieve a high average surface charge density,and second,regulating the internal charge transfer process and storing charge in triboelectric materials to increase the output charge density.Finally,we present the challenges and prospects in developing high-performance triboelectric materials.

Fast and Balanced Charge Transport Enabled by Solution-Processed Metal Oxide Layers for Efficient and Stable Inverted Perovskite Solar Cells

Metal oxide charge transport materials are preferable for realizing long-term stable and potentially low-cost perovskite solar cells(PSCs).However,due to some technical difficulties(e.g.,intricate fabrication protocols,high-temperature heating process,incompatible solvents,etc.),it is still challenging to achieve efficient and reliable all-metal-oxide-based devices.Here,we developed efficient inverted PSCs(IPSCs)based on solution-processed nickel oxide(NiO_(x))and tin oxide(SnO_(2))nanoparticles,working as hole and electron transport materials respectively,enabling a fast and balanced charge transfer for photogenerated charge carriers.Through further understanding and optimizing the perovskite/metal oxide interfaces,we have realized an outstanding power conversion efficiency(PCE)of 23.5%(the bandgap of the perovskite is 1.62 eV),which is the highest efficiency among IPSCs based on all-metal-oxide charge transport materials.Thanks to these stable metal oxides and improved interface properties,ambient stability(retaining 95%of initial PCE after 1 month),thermal stability(retaining 80%of initial PCE after 2 weeks)and light stability(retaining 90%of initial PCE after 1000 hours aging)of resultant devices are enhanced significantly.In addition,owing to the low-temperature fabrication procedures of the entire device,we have obtained a PCE of over 21%for flexible IPSCs with enhanced operational stability.

Regulating the interfacial charge transfer and constructing symmetry-breaking sites for the enhanced N_(2) electroreduction activity

The Haber-Bosch process for industrial NH_(3) production is energy-intensive with heavy CO_(2) emissions.Electrochemical N_(2) reduction reaction(NRR)is an attractive carbon-neutral alternative for NH_(3) synthesis,while the challenge associated with N_(2) activation highlights the demand for efficient electrocatalysts.Herein,we demonstrate that PdCu nanoparticles with different Pd/Cu ratios anchored on boron nanosheet(PdCu/B)behave as efficient NRR electrocatalysts toward NH_(3) synthesis.Theoretical and experimental results confirm that the highly efficient NH_(3) synthesis can be achieved by regulating the charge transfer between interfaces and forming a symmetry-breaking site,which not only alleviates the hydrogen evolution but also changes the adsorption configuration of N_(2) and thus optimizes the reaction pathway of NRR over the separated Pd sites.Compared with monometallic Pd/B and Cu/B,the PdCu/B with the optimized Pd/Cu ratio of 1 exhibits superior activity and selectivity for NH_(3) synthesis.This study provides new insight into developing efficient catalysts for small energy molecule catalytic conversion via regulating the charge transfer between interfaces and constructing symmetry-breaking sites.

Regulated adsorption-diffusion and enhanced charge transfer in expanded graphite cohered with N,B bridge-doping carbon patches to boost K-ion storage

The great challenges are remained in constructing graphite-based anode with well built-in structures to accelerate kinetics and enhance stability in the advanced K-ion batteries(KIBs).Here,we firstly report the design of expanded graphite cohered by N,B bridge-doping carbon patches(NBEG)for efficient K-ion adsorption/diffusion and long-term durability.It is the B co-doping that plays a crucial role in maximizing doping-site utilization of N atoms,balancing the adsorption-diffusion kinetics,and promoting the charge transfer between NBEG and K ions.Especially,the robust lamellar structure,suitable interlayer distance,and rich active sites of the designed NBEG favor the rapid ion/electron transfer pathways and high K-ion storage capacity.Consequently,even at a low N,B doping concentration(4.36 at%,2.07 at%),NBEG anode shows prominent electrochemical performance for KIBs,surpassing most of the advanced carbon-based anodes.Kinetic studies,density functional theory simulations,and in-situ Raman spectroscopy are further performed to reveal the K-ion storage mechanism and confirm the critical actions of co-doping B.This work offers the new methods for graphite-electrode design and the deeper insights into their energy storage mechanisms in KIBs.

Design Strategy of Infrared 4-Hydroxybenzylidene-imidazolinone-Type Chromophores based on Intramolecular Charge Transfer:a Theoretical Perspective

Partial genetically encoded 4-hy-droxybenzylidene-imidazolinone(HBI)-type chromophores are new promising fluorescent probes,which are suitable for imaging and detection of living cells.How-ever,the lack of infrared chro-mophores hinders the develop-ment seriously.Here more than 30 HBI-type chromophores with reg-ular structure modifications were employed and typical spectral redshift change laws and mechanisms were investigated by quantum methods.Results show that both one-photon spectrum(OPS,absorption/emission)and two-photon absorption(TPA)can achieve large redshift via either extending conjugated lengths of frag-3 or enlarging conjugated areas of frag-1 of HBI skeleton.Spectral redshifts of all chromophores are highly related to intramolecular charge transfer(ICT),but neutral ones are closely related to the total ICT or electron-accept-ing-numbers of frag-3,and the high correlative factor of anions is the aromaticity of frag-2 bridge.The frag-2 bridge with high aromaticity can open a reverse charge transfer channel in anion relative to neutral,obtaining significant redshift.Based on analysis,a new 6-hydroxyl-naphthalene-imidazolinone(HNI)series,which have larger conjugated area in frag-1,are pre-dicted.The OPS and TPA of anionic HNI ones acquire about 76−96 nm and 119−146 nm red-shift relative to traditional HBI series respectively as a whole.The longest emission of anionic HNI-4 realizes more 244 nm redshift relative to HBI-1.Our work clarifies worthy spectral reg-ularities and redshift mechanisms of HBI-type chromophores and provides valuable design strategy for infrared chromophores synthesis in experiment.

Incomplete charge transfer in CMOS image sensor caused by Si/SiO_(2)interface states in the TG channel

CMOS image sensors produced by the existing CMOS manufacturing process usually have difficulty achieving complete charge transfer owing to the introduction of potential barriers or Si/SiO_(2)interface state traps in the charge transfer path,which reduces the charge transfer efficiency and image quality.Until now,scholars have only considered mechanisms that limit charge transfer from the perspectives of potential barriers and spill back effect under high illumination condition.However,the existing models have thus far ignored the charge transfer limitation due to Si/SiO_(2)interface state traps in the transfer gate channel,particularly under low illumination.Therefore,this paper proposes,for the first time,an analytical model for quantifying the incomplete charge transfer caused by Si/SiO_(2)interface state traps in the transfer gate channel under low illumination.This model can predict the variation rules of the number of untransferred charges and charge transfer efficiency when the trap energy level follows Gaussian distribution,exponential distribution and measured distribution.The model was verified with technology computer-aided design simulations,and the results showed that the simulation results exhibit the consistency with the proposed model.

Anomalous photoluminescence enhancement and resonance charge transfer in type-II 2D lateral heterostructures

Type-Ⅱband alignment can realize the efficient charge transfer and separation at the semiconductor heterointerface,which results in photoluminescence(PL)quenching.Recently,several researches demonstrated great enhancement of localized PL at the interface of type-Ⅱtwo-dimensional(2D)heterostructure.However,the dominant physical mechanism of this enhanced PL emission has not been well understood.In this work,we symmetrically study the exciton dynamics of type-Ⅱlateral heterostructures of monolayer MoS_(2) and WS_(2) at room temperatures.The strong PL enhancement along the one-dimensional(1D)heterointerface is associated with the trion emission of the WS_(2) shell,while a dramatic PL quenching of neutral exciton is observed on the MoS_(2) core.The enhanced quantum yield of WS2trion emission can be explained by charge-transfer-enhanced photoexcited carrier dynamics,which is facilitated by resonance hole transfer from MoS_(2) side to WS_(2) side.This work sheds light on the 1D exciton photophysics in lateral heterostructures,which has the potential to lead to new concepts and applications of optoelectronic device.

Charge-Transfer and SERS Coupling on TiO2

We report the SERS enhancements of Raman forbidden surface modes of TiO2 in different sized TiO2 crystals. This current study utilizes the relationship between the vibronic coupling and the degree of charge-transfer to explain the differences of Surface Enhanced Raman Scattering (SERS) enhancements. Our study shows a direct correlation between the degree of charge-transfer and vibronic coupling. This relationship suggests that charge-transfer between the N-719 dye and TiO2 due to vibronic coupling plays a fundamental role in SERS enhancements. Furthermore, this study shows a strong dependence of the enhancements of the N-719 dye molecular modes to that of the surface modes. This indicates that the mechanism that governs the enhancements of the surface modes in TiO2 crystals most likely also dictates the enhancements of the N-719 dyes.

Visualization of Metal-to-Ligand and Ligand-to-Ligand Charge Transfer in MetaloLigand Complexes

Three methods including the atomic resolved density of state, charge difference density, and the transition density matrix are used to visualize metal to ligand charge transfer （MLCT） in ruthenium（II） ammine complex. The atomic resolved density of state shows that there is density of Ru on the HOMOs. All the density is localized on the ammine, which reveals that the excited electrons in the Ru complex are delocalized over the ammine ligand. The charge difference density shows that all the holes are localized on the Ru and the electrons on the ammine. The localization explains the MLCT on excitation. The transition density matrix shows that there is electron-hole coherence between Ru and ammine. These methods are also used to examine the MLCT in Os（bpy）2（p0p）Cl （＂Osp0p＂： bpy=2,2-bipyrldyl; p0p=4,4＇- bipyridyl） and the ligand-to-ligand charge transfer （LLCT） in Alq3. The calculated results show that these methods are powerful to examine MLCT and LLCT in the metal-ligand system.

Long-range electron synergy over Pt_(1)-Co_(1)/CN bimetallic single-atom catalyst in enhancing charge separation for photocatalytic hydrogen production

The development of novel single-atom catalysts with optimal electron configuration and economical noble-metal cocatalyst for efficient photocatalytic hydrogen production is of great importance,but still challenging.Herein,we fabricate Pt and Co single-atom sites successively on polymeric carbon nitride(CN).In this Pt_(1)-Co_(1)/CN bimetallic single-atom catalyst,the noble-metal active sites are maximized,and the single-atomic Co_(1)N_4sites are tuned to Co_(1)N_3sites by photogenerated electrons arising from the introduced single-atomic Pt_(1)N_4sites.Mechanism studies and density functional theory(DFT)calculations reveal that the 3d orbitals of Co_(1)N_3single sites are filled with unpaired d-electrons,which lead to the improved visible-light response,carrier separation and charge migration for CN photocatalysts.Thereafter,the protons adsorption and activation are promoted.Taking this advantage of long-range electron synergy in bimetallic single atomic sites,the photocatalytic hydrogen evolution activity over Pt_(1)-Co_(1)/CN achieves 915.8 mmol g^(-1)Pt h^(-1),which is 19.8 times higher than Co_(1)/CN and 3.5 times higher to Pt_(1)/CN.While this electron-synergistic effect is not so efficient for Pt nanoclusters.These results demonstrate the synergistic effect at electron-level and provide electron-level guidance for the design of efficient photocatalysts.

Extended Holstein polaron model for charge transfer in dry DNA

The variational method is applied to the study of charge transfer in dry DNA by using an extended Holstein small polaron model in two cases： the site-dependent flnite-chain discrete case and the site-independent continuous one. The treatments in the two cases are proven to be consistent in theory and calculation. Discrete and continuous treatments of Holstein model both can yield a nonlinear equation to describe the charge migration in an actual long-range DNA chain. Our theoretical results of binding energy Eb, probability amplitude of charge carrier Ф and the relation between energy and charge-lattice coupling strength are in accordance with the available experimental results and recent theoretical calculations.

Experimental and Theoretical Investigation on Excited State Intramolecular Proton Transfer Coupled Charge Transfer Reaction of Baicalein

The excited state intramolecular proton transfer （ESIPT） coupled charge transfer of baicalein has been investigated using steady-state spectroscopic experiment and quantum chemistry calculations. The absence of the absorption peak from S1 excited state both in the experi-mental and calculated absorption spectra indicates that S1 is a dark state. The dark excited state S1 results in the very weak fluorescence of solid baicalein in the experiment. The fron- tier molecular orbital and the charge difference densities of baicalein show clearly that the S1 state is a charge-transfer state whereas the S2 state is a locally excited state. The only one stationary point on the potential energy profile of excited state suggests that the ESIPT reaction of baicalein is a barrierless process.

Charge transfer in plasma assisted dry reforming of methane using a nanosecond pulsed packed-bed reactor discharge

This paper is aimed to investigate the effect of packing material on plasma characteristic from the viewpoint of charge transfer process.Both the charge accumulation and release processes in the dielectric barrier discharge reactor and packed-bed reactor were investigated by measuring voltage and current waveforms and taking ICCD images.The packing material was ZrO2 pellets and the reactors were driven by a parameterized nanosecond pulse source.The quantity of transferred charges in the dielectric barrier discharge reactor was enhanced when decreasing pulse rise time or increasing pulse width(within 150 ns),but reduced when the gas gap was packed with pellets.The quantity of accumulated charges in the primary discharge was larger than the quantity of released charges in the secondary discharges in the dielectric barrier discharge reactor,but they were almost equal in the packed-bed reactor.It indicates that the discharge behavior has been changed from the view of charge transfer process once the gas gap was packed with pellets,and the ICCD images confirmed it.