Effects of Light Time, Light Intensity and Light Color on the Growth and Quality of Cordyceps militaris

Cordyceps militaris,which is a precious edible fungus,contains effective ingredients such as cordycepin and adenosine,and can treat a variety of diseases.However,light has the greatest effect on the growth of C.militaris in the process of artificial cultivation.In this study,the effects of light time,light intensity and light color on the growth,physiology,yield and quality of C.militaris were discussed to provide reference for the efficient artificial cultivation of C.militaris.

Fabrication of High Color Rendering Index White Light Emitting Diodes from Gold Nanoclusters

We demonstrated gold nanoclusters as color tunable emissive light converters for the application of white light emitting diodes (WLEDs). A blue LED providing 460 nm to excite gold nanoclusters mixed with UV curable material generates broad bandwidth emission at the visible range. Increasing the amount of gold nanoclusters, the correlated color temperature of WLEDs tuned from cold white to warm white, and also results in the variation of color rendering index (CRI). The highest CRI in the experiment is 92.

Color-stable,reduced efficiency roll-off hybrid white organic light emitting diodes with ultra high brightness

High-brightness and color-stable two-wavelength hybrid white organic light emitting diodes （HWOLEDs） with the configuration of indium tin oxide （ITO）/ N, N, N, N-tetrakis（4-methoxyphenyl）-benzidine （MeO-TPD）： tetrafluoro-tetracyanoqino dimethane （F4-TCNQ）/N,N-di（naphthalene-1-yl）-N,N-diphenyl-benzidine （NPB）/ 4,4-N,N-dicarbazolebiphenyl （CBP）： iridium （III） diazine complexes （MPPZ） 2 Ir（acac）/NPB/2-methyl-9,10-di（2-naphthyl）anthracene （MADN）： p-bis（p-N,N-di-phenyl-aminostyryl）benzene （DSA-ph）/bis（10-hydroxybenzo[h] quino-linato）beryllium complex （Bebq2）/LiF/Al have been fabricated and characterized. The optimal brightness of the device is 69932 cd/m2 at a voltage of 13 V, and the Commission Internationale de l’Eclairage （CIE） chromaticity coordinates are almost constant during a large voltage change of 6–12 V. Furthermore, a current efficiency of 15.3 cd/A at an illumination-relevant brightness of 1000 cd/m2 is obtained, which rolls off slightly to 13.0 cd/A at an ultra high brightness of 50000 cd/m2. We attribute this great performance to wisely selecting an appropriate spacer together with effectively utilizing the combinations of exciton-harvested orange-phosphorescence/blue-fluorescence in the device. Undoubtedly, this is one of the most exciting results in two-wavelength HWOLEDs up to now.

Very-High Color Rendering Index Hybrid White Organic Light-Emitting Diodes with Double Emitting Nanolayers

A very-high color rendering index white organic light-emitting diode(WOLED) based on a simple structure was successfully fabricated. The optimized device exhibits a maximum total efficiency of 13.1 and 5.4 lm/W at 1,000 cd/m2. A peak color rendering index of 90 and a relatively stable color during a wide range of luminance were obtained. In addition, it was demonstrated that the 4,40,400-tri(9-carbazoyl) triphenylamine host influenced strongly the performance of this WOLED.These results may be beneficial to the design of both material and device architecture for high-performance WOLED.

Developing a Machine Vision System Equipped with UV Light to Predict Fish Freshness Based on Fish-Surface Color

This study assessed the feasibility of developing a machine vision system equipped with ultraviolet (UV) light, using changes in fish-surface color to predict aerobic plate count (APC, a standard freshness indicator) during storage. The APC values were tested and images of the fish surface were taken when fish were stored at room temperature. Then, images’ color-space conversion among RGB, HSV, and L*a*b* color spaces was carried out and analyzed. The results revealed that a* and b* values from the UV-light image decreased linearly during storage. A further regression analysis of these two parameters with APC value demonstrated a good exponential relationship between the a* value and the APC value (R2 = 0.97), followed by the b* (R2 = 0.85). Therefore, our results suggest that the change in color of the fish surface under UV light can be used to assess fish freshness during storage.

Estimating light interception using the color attributes of digital images of cotton canopies

Crop growth and yield depend on canopy light interception （LI）. To identify a low-cost and relatively efficient index for measuring LI, several color attributes of red-green-blue （RGB）, hue-saturation-intensity （HSI）, hue-saturation-value （HSV） color models and the component values of color attributes in the RGB color model were investigated using digital images at six cotton plant population densities in 2012-2014. The results showed that the LI values followed downward quadratic curves after planting. The red （R）, green （G） and blue （B） values varied greatly over the years, in accordance with Cai＇s research demonstrating that the RGB model is affected by outside light. Quadratic curves were fit to these color attributes at six plant population densities. Additionally, linear regressions of LI on every color attribute revealed that the hue （H） values in HSI and HSV were significantly linearly correlated with LI with a determination coefficient （R2）〉0.89 and a root mean square error （RMSE）=0.05. Thus, the H values in the HSI and HSV models could be used to measure LI, and this hypothesis was validated. The H values are new indexes for quantitatively estimating the LI of heterogeneous crop cano- pies, which will provide a theoretical basis for optimizing the crop canopy structure. However, further research should be conducted in other crops and under other growing and environmental conditions to verify this finding.

Progress in Understanding Color Maintenance in Solid-State Lighting Systems

In this paper, progresses of color maintenance, also known as color shift, in solid-state lighting(SSL) systems are thoroughly reviewed. First, color shift is introduced and a few examples are given from different real-life industrial conditions. Different degradation mechanisms in different parts of the system are also explained. Different materials used as lenses/encapsulants in light-emitting diode(LED)-based products are introduced and their contributions to color shift are discussed. Efforts put into standardization, characterizing, and predicting lumen maintenance are also briefly reviewed in this paper.

Application of color structured light pattern to measurement of large out-of-plane deformation

Measurement of out-of-plane deformation is significant to understanding of the deflection mechanisms of the plate and tube structures.In this study,a new surface contouring technique with color structured light is applied to measure the out-of-plane deformation of structures with one-shot projection.Through color fringe recognizing,decoding and triangulation processing for the captured images corresponding to each deformation state,the feasibility of the method is testified by the measurement of elastic deflections of a flexible square plate,showing good agreement with those from the calibrated displacement driver.The plastic deformation of two alloy aluminum rectangular tubes is measured to show the technique application to surface topographic evaluation of the buckling structures with large displacements.

High color rendering index white organic light-emitting diode using levofloxacin as blue emitter

Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED contains a 452-nm blue emitting layer （thickness of 30 nm） with 1 wt% LOFX doped in CBP （4,4＇-bis（carbazol-9-yl）biphenyl） host and a 584-nm orange emitting layer （thickness of 10 nm） with 0.8 wt% DCJTB （4-（dicyanomethylene）-2-tert-butyl-6-（1,1,7,7- tetramethyljulolidin-4-yl-vinyl）-4H-pyran） doped in CBE which are separated by a 20-nm-thick buffer layer of TPBi （2,2＇,2＂-（benzene-1,3,5-triyl）-tri（1-phenyl-lH-benzimidazole）. A high color rendering index （CRI） of 84.5 and CIE chromaticity coordinates of （0.33, 0.32）, which is close to ideal white emission CIE （0.333, 0.333）, are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.

Color Ghost Imaging with Pseudo-White-Thermal Light

A pseudo-white-thermM light source is prepared by projecting three （red, green, and blue） laser beams onto a rotating ground glass disk. Based on the RGB color model, we investigate the color Hanbury-Brown Twiss （HI）T） effect and color ghost imaging with thermal light. The color HBT effect indicates that photons of the same color will bunch. This fact ensures the chromatic discrimination power of ghost imaging with thermM light. We retrieve the RGB ingredients of the object through intensity correlation measurements. A method of white balance to properly form the ghost images is proposed,

Three-dimensional color particle image velocimetry based on a cross-correlation and optical flow method

Rainbow particle image velocimetry(PIV)can restore the three-dimensional velocity field of particles with a single camera;however,it requires a relatively long time to complete the reconstruction.This paper proposes a hybrid algorithm that combines the fast Fourier transform(FFT)based co-correlation algorithm and the Horn–Schunck(HS)optical flow pyramid iterative algorithm to increase the reconstruction speed.The Rankine vortex simulation experiment was performed,in which the particle velocity field was reconstructed using the proposed algorithm and the rainbow PIV method.The average endpoint error and average angular error of the proposed algorithm were roughly the same as those of the rainbow PIV algorithm;nevertheless,the reconstruction time was 20%shorter.Furthermore,the effect of velocity magnitude and particle density on the reconstruction results was analyzed.In the end,the performance of the proposed algorithm was verified using real experimental single-vortex and double-vortex datasets,from which a similar particle velocity field was obtained compared with the rainbow PIV algorithm.The results show that the reconstruction speed of the proposed hybrid algorithm is approximately 25%faster than that of the rainbow PIV algorithm.

Color-converted remote phosphor prototype of a multiwavelength excitable borosilicate glass for white light-emitting diodes

We report a unique red light-emitting Eu-doped borosilicate glass to convert color for warm white light-emitting diodes. This glass can be excited from 394 nm-peaked near ultraviolet light, 466 nm-peaked blue light, to 534 nm- peaked green light to emit the desired red light with an excellent transmission in the wavelength range of 400-700 nm which makes this glass suitable for color conversion without a great cost of luminous power loss. In particular, when assembling this glass for commercial white light-emitting diodes, the tested results show that the color rendering index is improved to 84 with a loss of luminous power by 12 percent at average, making this variety of glass promising for inorganic ＂remote-phosphor＂ color conversion.

Relationship between Colored Microstructure under Polarized Light and Shape Recovery Characteristics on the Thermomechanical Cycled CuAlNi Single Crystals

The paper studied the relationship between microstructure and shape recovery characteristics by using colored microstructure analysis under polarized light on the thermomechanical cycled CuAlNi single crystals. The two-way shape memory effect in quenched thin bar resulted from the preferential formation/extinction of martensite variant due to the internal quench stress, and the variant was formed at an angle of about 45 deg. with the tension direction ([001] of the βphase). Initial thermomechanical cycling under relatively low stress single variant stress-induced martensite was formed at an angle of 45 deg. with the tension and its morphology was a lath of parallel twins. More than one group of variants were formed after several training cycles and such variants also caused tilting of some thermally formed accommodated martensite. By overheating the trained sample containing stabilized multi-variants of stress-induced martensite, very coarse martensite structure with a strong asymmetry was produced, which caused the reverse two-way shape memory effect.

White Organic Light-emitting Diodes with A Sr_2SiO_4:Eu^(3+) Color Conversion Layer

Abstract:Hybrid inorganic/organic white organic light emitting diodes(hybrid-WOLEDs)are fabricated by combi-ning the blue phosphorescent organic light emitting diodes(PHOLEDs)with red Sr2SiO4:Eu3+phosphor spin coatedas a color conversion layer(CCL)over the other side of glass substrate on the devices.The basic configuration of thePHOLEDs consists a host material,N,N'-dicarbazolyl-3,5-benzene(mCP)which doped with a blue phosphorescentiridium complexes iridium(Ⅲ)bis[(4,6-di-fluorophenyl)-pyridinato-N-C2'](FIrpic)to produce high efficient blueorganic light emitting diodes.The hybrid-WOLED shows maximum luminous efficiency of 22.1 cd/A,maximumpower efficiency of 11.26 lm/W,external quantum efficiency of 10.2%and CIE coordinates of(0.32,0.34).Mo-reover,the output spectra and CIE coordinates of the hybrid-WOLED have a small shift in different driving currentdensity,which demonstrate good color stability.

Color-Tunable Hybrid White Organic Light-Emitting Diodes with Double Interlayers

An efficient color-tunable hybrid white organic light-emitting diode is demonstrated with double interlayers of 2,7-bis(carbazol-9-yl)-9,9-ditoylfluo- rene/2-(diphenylphosphoryl) spiroflu-orene (DMFL-CBP/SPPO1) inserted between blue fluorescent and yellow phosphorescent-emitting layers, and exhibits Commission Internationale de l’Eclairage (CIE1931) ranging from warm white (0.4368, 0.4497) to cool white (0.2781, 0.2896) with driving current density from 0.2 to 40 mA/cm2. The recombination of singlet and the triplet excitons in blue fluores-cent-emitting layer and yellow phosphorescent-emitting layer, respectively, can be modulated by both the thickness of these double interlayers and the applied current densities.

The Effect of Recombination Zone Positon on the Color Temperature Performance in the Color-Tunable White Organic Light-Emitting Diode

Using a color-tunable organic light-emitting diode (CT-OLED) can accord with the circadian cycle of humans and realize healthy lighting. The variation range of the correlated color temperature (CCT) is an important parameter to measure the performance of CT-OLEDs. In this paper, the effect of changing the utilization of phosphorescent materials and the position of the recombination zone (RZ) in the device are investigated by changing the thickness of the emissive layer (EML) and the doping ratio of the host and guest materials. The results show that reducing the red phosphorescent material and improving the blue phosphorescent material can affect the change direction of CCT, but it is not enough to expand the span of CCT (ΔCCT). It is more conducive to improving ΔCCT by more reasonable regulation of the position of the main RZ in EML and the energy transfer from the blue sub-EML to the red sub-EML. Device D obtains the best electro-optic and spectral characteristics, in which the maximum ΔCCT is 5746 K (2661 - 8407 K) as the voltage changes from 3.75 V to 9.75 V, the maximum current efficiency and luminance reach 18.34 cd·A-1 and 12,100 cd·m-2, respectively.

Distributed Intelligent Lighting System by Performing New Model for Illuminance and Color Temperature in the Workplace

A new approach has been proposed to improve the performance of the in-telligent lighting system by estimating personal illuminance and desired color temperature at the workplace. We are considering the problem of using the sensing devices manually for the intelligent lighting system. The lighting control system has not become useful without sensing devices to measure the provided illuminance and color temperature. In this paper, we have used the property of light for the color temperature to estimate the level of color temperature for each user at the workplace. The new method will give personal illuminance for each user at the workplace and decrease the power consumption of the environment as well. As a result, the proposed method of the intelligent lighting system has realized the target of illuminance and color temperature for each user at the workplace by adapting dimming levels using illuminance sensing information for each user. Thus, the energy of the workplace has reduced by using a distributed luminance to realize the target for each user.

Low-light color image enhancement based on NSST

In order to improve the visibility and contrast of low-light images and better preserve the edge and details of images,a new low-light color image enhancement algorithm is proposed in this paper.The steps of the proposed algorithm are described as follows.First,the image is converted from the red,green and blue(RGB)color space to the hue,saturation and value(HSV)color space,and the histogram equalization(HE)is performed on the value component.Next,non-subsampled shearlet transform(NSST)is used on the value component to decompose the image into a low frequency sub-band and several high frequency sub-bands.Then,the low frequency sub-band and high frequency sub-bands are enhanced respectively by Gamma correction and improved guided image filtering(IGIF),and the enhanced value component is formed by inverse NSST transform.Finally,the image is converted back to the RGB color space to obtain the enhanced image.Experimental results show that the proposed method not only significantly improves the visibility and contrast,but also better preserves the edge and details of images.

Correlated Color Temperature Tunable Multi-chip Light Emitting Diodes Light Source Design

One of the methods to derive white light from light emitting diodes(LEDs)is the multi-chip white LED technology,which mixes the light from red,green and blue LEDs.Introduced is an optimal algorithm for the spectrum design of the multi-chip white LEDs in this paper.It optimizes the selection of single color LEDs and drive current controlling,so that the multi-chip white LED achieves the target correlated color temperature(CCT),as well as high luminous efficacy and good color rendering.A CCT tunable LED light source with four high-power LEDs is realized based on the above optimal design.Test results show that it maintains satisfactory color rendering and stable luminous efficacy across the whole CCT tuning range.Finally,discussed are the design improvement and the prospect of the future applications of the CCT tunable LED light source.