Light-Induced Charge Transfer at Interface Between Lipid-Free RhTSPc Film and p-Si(111)

The present paper covers the lipid-free rhodium tetrasulfonato-phthalocyanine (RhTSPc) films prepared on p-Si(111) by using Langmuir-Blodgett technique. Their surface photovoltage spectra were measured. It was found that there is a strong interaction at the interface between the RhTSPc film and p-Si (111) and that the surface photovoltaic effect of the film system is maximum when only one monolayer of RhTSPc molecules coats p-Si(111), which is similar to that of CuTSPc films on p-Si(111) reported previously. These results confirm that only the monolayer of dye molecules being adjacent to the semiconductor surface plays a key role in the light-induced interfacial charge transfer process.

Oscillation of the spin-currents of cold atoms on a ring due to light-induced spin–orbit coupling

The evolution of two-component cold atoms on a ring with spin-orbit coupling has been studied analytically for the case with N noninteracting particles. Then, the effect of interaction is evaluated numerically via a two-body system. Two cases are considered： （i） Starting from a ground state the evolution is induced by a sudden change of the laser field, and （ii） the evolution starting from a superposition state. Oscillating persistent spin-currents have been found. A set of formulae have been derived to describe the period and amplitude of the oscillation. Based on these formulae the oscillation can be well controlled via adjusting the parameters of the laser beams. In particular, it is predicted that movable stripes might emerge on the ring.

Dark Oscillation of Light-induced Absorption in Heavy Reduced Co: KNSBN Crystal

This paper presents dark oscillations of light-indhced absorption in heavy reduced Co: KNSBN crystal, points out there are double carriers and multiple traps in the crystal and explains the experimental results with the newly established model of double carriers and multiple traps.

Advantage of Introducing Quantitative Light-Induced Fluorescence in School Dental Checkups

Background: Caries detection in school oral examinations insufficient accuracy. Objective: To evaluate advantages of introducing quantitative light-induced fluorescence-digital (QLF-D) in school oral examinations. Methods: Experiment No. 1. Early demineralized lesions in the upper and lower incisors and canines were visually inspected by three dentists and by QLF-D. The numbers of tooth planes with early demineralized lesions were compared between the methods. Experiment No. 2. Approximal demineralized lesions in molars were assessed by visual inspection, x-ray imaging, and QLF-D. The numbers of tooth planes with demineralized lesions were compared among the methods. Experiment No. 3. Plaque distribution was evaluated by QLF-D and a traditional staining method. The ratio of the diameter of plaque to tooth crown in the tooth axis direction in each method was calculated. The results were evaluated by Pearson’s correlation coefficient analysis and Bland-Altman plot. Results: Experiment No. 1. The three dentists found 0.67 tooth planes on average. QLF-D found 22 tooth planes with early demineralized lesions in the same samples. Experiment No. 2. Fourteen approximal tooth planes of molars were found to have demineralized lesions by x-ray imaging. QLF-D detected 71.4% of the tooth planes out of the 14, whereas visual inspection found 7.1%. Experiment No. 3. The Pearson’s correlation coefficient for the evaluations of plaque distribution between the QLF-D and traditional staining methods was 0.77 (P Conclusion: The results support introduction of QLF-D for use in school dental examinations.

Light-Induced Mid-Infrared Emission of Liquid Carbon Tetrachloride and Benzene

Light-induced infrared emission spectroscopy (LIRES) is a novel technique that permits to receive high-quality spectra in the mid-infrared region. Low-intensity visible light connected to a highly sensitive FTIR spectrometer is more advantageous for studying any samples, including biological samples without any damage. This technique permits obtaining unique information on the molecule structure via vibrational excitation fundamental frequencies, overtones, and combination modes. It also enables a direct observation of vibrational radiation transitions in vibrationally excited molecules as well as the channels of vibration energy redistribution, which is not allowed with any other method. In this work, the LIRES is being tested as a technique for studying of vibrationally-excited molecules of carbon tetrachloride and benzene in the liquid phase. On the other hand, using transparent liquids, we had tried to understand some of the physical phenomena that can drive emission in mid-IR. The characteristics of the infrared emission of both liquid species produced by different wavelength radiation from various types of light systems (100 - watt Xe-lamp and Nd:YAG laser;lambda = 1064 nm (8 mW) and lambda = 532 nm (4 mW)) are presented. We demonstrated that the IR-signal, as well as spectral properties of carbon tetrachloride and benzene, was dependent on the wavelength and power of excitation beam. Results obtained with different light sources show that the visible light produces a nonlinear IR-emission signal in transparent liquids. We believe that the visible light is the source of the nonlinear response and is producing the vibration excitation as well as photostimulated transformations of the molecules possessing the high activity for the nonlinear response.

Evaluating Acid Resistance Effect of Fluoride-Releasing Dental Materials Using Quantitative Light-Induced Fluorescence-Digital in Vitro

As erosion has become one of the serious oral health problems, some fluoride-releasing dental materials have been developed to protect enamel from demineralization. The purpose of this study was to evaluate the antidemineralization effect of PRG Barrier Coat® and FujiVII® (fluoride-releasing dental materials). Four square windows measuring 1 mm2 were prepared on the labial enamel surface of each bovine tooth using masking tape and nail varnish. The first and second windows were half covered by fluoride-releasing material and control material, respectively, whereas the third and fourth windows were left untreated. All windows were immersed into 0.1 M lactic acid and 6wt% CM-cellulose (pH 4.5) at 38℃ for 21 days. Subsequently, the first and second windows were covered with nail varnish after removal of the materials, and the third and fourth windows were immersed into ultrapure water at 38℃ for 28 days after being half covered with fluoride-releasing and control materials, respectively. The following procedure was performed separately during evaluations of the fluoride-releasing materials, PRG Barrier Coat, and FujiVII®, using eight and six bovine teeth, respectively. The first, second, third, and fourth windows were classified into DM-PRG;Demineralized-PRG or DM-FujiVII;Demineralized-FujiVII, DM-TCM;Demineralized-traditional cement or DM-TGIC;De-mineralized-traditional glass ionomer cement, RM-PRG;Remineralized-PRG or RM-FujiVII;Re-mineralized-FujiVII, and RM-TCM;Remineralized- traditional cement or RM-TGIC;Remineral-ized-traditional glass ionomer cement, respectively. After nail varnish was removed, △Q values (mean ± SD) of the windows were measured using QLF-D and were compared between DM-PRG and DM-TCM, RM-PRG and RM-TCM, DM-FujiVII and DM-TGIC, and RM-FujiVII and RM-TGIC groups. △Q values of RM-PRG (-60 ± 44) and RM-FujiVII (-5.0 ± 10) were significantly higher than that of RM-TCM (-315 ± 193) and RM-TGIC (-56 ± 43), respectively. The fluoride releasing materials provided remineralization effects to bovine enamel.

Research on critical technology of micro/nano bioparticles manipulation platform based on light-induced dielectrophoresis

On the basis of the research on the status and problems of micro/nano bio-particles manipulation using dielectrophoresis, the theoretical basis and the model simulation of micro/nano bio-particles manipu-lation using light-induced dielectrophoresis were discussed. The space distribution of electric field and dielectrophoresis forces in different heights were also obtained. On this basis, the core component of the micro manipulation system, that is, photoconductive layer of the chip, was completed in the mate-rial selection, fabricating process and performance analysis testing. Then the voltage drop of the sus-pension and the effective voltage frequency spectrum were obtained. Finally, by combining the machine vision detection with real-time tracking system, the micro/nano bio-particles manipulation platform based on the light-induced dielectrophoreisis was established, and then the manipulations for micro/nano bio-particles, such as quick collection, transport, separation, were implemented. This provided a basis for rapid, accurate, and low-cost detection of serious diseases based on the micro-fluidic biochip and early diagnosis.

Spontaneous and light-induced photon emission from intact brains of chick embryos

Photon emission (PE) and light-induced photon emission(LPE) of intact brains isolated from chick embryos have been measured by using the single photon counting device. Experimental results showed that the intensi-ty level of photon emission was detected to be higher from intact brain than from the medium in which the brain was immerged during measuring, and the emission intensity was related to the developmental stages, the healthy situation of the measured embryos, and the freshness of isolated brains as well. After white light illumination, a short-life de-layed emission from intact brains was observed, and its relaxation behavior followed a hyperbolic rather than an expo-nential law. According to the hypothesis of biophoton emission originating from a delocalized coherent electromagnetic field and Frohlich’s idea of coherent long-range interactions in biological systems, discussions were made on the signifi-cance of photon emission in studying cell communication, biological regulation, living system’

Sensitive carbon monoxide detection based on light-induced thermoelastic spectroscopy with a fiber-coupled multipass cell[Invited]

sensor based on light-induced thermoelastic spectroscopy(LITES)with a fiber-coupled multipass cell was demonstrated for carbon monoxide(CO)detection.The fiber-coupled structure has the merits of reducing optical interference and difficulty in optical alignment and increasing system robustness.A 1.57 nm continuous wave distributed feedback diode laser was used as the excitation source.A minimum detection limit of 9 ppm was obtained,and the calculated normalized noise equivalent absorption coefficient was 1.15×10^(-7)cm^(-1)•W•Hz^(-1/2).The reported CO-LITES sensor showed excellent linear concentration response and system stability.

Light-induced nonhomogeneity and gradient bending in photochromic liquid crystal elastomers

The recently reported opto-mechanical effect of some photochromic liquid crystal elastomers (LCEs) is studied. It is found that in such LCEs, material parameters such as the Young’s modulus and the stress-free strains will become nonhomogeneous under light irradiations. One may call them the light-induced functionally gradient materials. Analytical expressions for the dependence of the material parameters on the space varia- ble and possibly on the time variable are obtained. Exponential dependence can be derived under certain approximations. As an example, the light-induced bending of a beam is studied. Two neutral planes are found in the beam. Thus, along the thickness of the beam, there are extensions in the upper and lower parts and contractions in the middle.

The Effect of Vaccinium Uliginosum on Rabbit Retinal Structure and Light-Induced Function Damage

Objective： To study the effect of Vaccinium uliginosum L., （VU） on the electroretinogram （ERG） and retinal pathological changes in rabbits after light-induced damage. Methods： Twenty-eight Chinchilla rabbits were randomly divided into four groups： administration beforehand （A）, administration after injury （B）, light injury without administration （C）, and blank （D） groups. After a 4-week administration of VU homogenate at 4.8 g/（kg.d） once a day in group A, ERG in groups A, B and C were recorded according to the standards set by the International Society for Clinical Electrophysiology of Vision （ISCEV）. Except for group D, the groups were then exposed to strong light. Just after that, group A stopped receiving VU treatment and group B started to receive it. Then ERGs in all groups were recorded after 1 day, 1 week, and 2 weeks. Throughout the whole process groups which were not fed with VU were fed with normal saline. Finally, the tissues and structures of all the groups were observed and the thickness of the outer nuclear layers （ONL） was measured. Results： （1） After 4-week feeding with VU, the latency time of ERG in group A became shorter than those in the other groups and the amplitude increased. After being exposed to strong light, the latency time lengthened and amplitude decreased in all the injury groups, but comparing at each time point, the measured values in group A were better than those in group C. With the accumulation of VU, the ERG in group B improved, and finally, all of the detected values became better than those in group C. （2） Retinae in group D were normal in histology and the layers were in order but those in group C became disarranged. The injudes in groups A and B were minor compared with those in group C. The thickness of the ONL in group C was significantly thinner than in the other groups （all P=0.000）, and that in groups A and B was thicker than that in group C, although thinner than in group D. That in group A was thicker than in group B. Conclusions： VU can relieve the injury to rabbit retinae exposed to normal day and night rhythm, alleviate the harm caused by light when used beforehand, and repair the light damage to the retina.

Light-Induced Photorefractive Waveguides in Iron-Doped Lithium Niobate Crystals

Waveguides were fabricated in lithium niobate crystals solely by light irradiation using binary optical masks and SLM-prepared optical masks. Arrayed-waveguides were also obtained by once or twice irradiations of an interferogram of two plane waves.

Light-induced frequency shifts for the lowest vibrational levels of ultracold Cs2 in the molecular pure long-range 0^-g state

The light-induced frequency shift(LIFS)of ultracold molecular ro-vibrational levels originates from the strong coupling of the atomic-scattering state and the bound-molecular state.In this paper,we present our experimental determination of the LIFSs of the lowest vibrational levels(v=0,1)in the purely long-range 0^-g state of ultracold cesium molecules.A high-resolution double photoassociation spectroscopy is developed,which serves as frequency ruler to measure the frequency shifts of the lowest molecular levels for Cs2.The experimental results are qualitatively consistent with the theoretical expectations.

Visible-light-induced,autopromoted nickel-catalyzed threecomponent arylsulfonation of 1,3-enynes and mechanistic insights

A light-induced,nickel-catalyzed three-component arylsulfonation of 1,3-enynes in the absence of photocatalyst is reported.This methodology exhibited mild conditions,broad scope and high efficiency,and its synthetic utility has been demonstrated by a concise total synthesis of sulfone-containing drug molecule.Detailed mechanistic studies indicated that this light induced nickel catalysis is autopromoted by in situ produced allene,which plays a key role as co-ligand in the photoactive excited state Ni(Ⅰ)species for the LMCT process.The detailed elucidation of this light-induced nickel catalytic cycle may shed some lights on the exploitation of new catalytic activity and establishment of novel methods.

Visible light-induced hydroxyalkylation of 2H-benzothiazoles with alcohols via selectfluor oxidation

A visible-light induced metal-free approach was described for the hydroxyalkylation of 2 Hbenzothiazoles with alcohols by using selectfluor as the oxidant.A variety of 2 H-benzothiazoles and alcohols could be tolerated,providing a mild and simple method for the synthesis of C2-hydroxyalkylated2 H-benzothiazoles in moderate to good yields.Besides,ethers were also compatible in this reaction,leading to corresponding C2 ether-substituted 2 H-benzothiazoles with high regioselectivity.

Improving poor fill factors for solar cells via light-induced plating

Silicon solar cells are prepared following the conventional fabrication processes, except for the metal- lization firing process. The cells are divided into two groups with higher and lower fill factors, respectively. After light-induced plating （LIP）, the fill factors of the solar cells in both groups with different initial values reach the same level. Scanning electron microscope （SEM） images are taken under the bulk silver electrodes, which prove that the improvement for cells with a poor factor after LIP should benefit from sufficient exploitation of the high density silver crystals formed during the firing process. Moreover, the application of LIP to cells with poor electrode contact performance, such as nanowire cells and radial junction solar cells, is proposed.

A highly sensitive LITES sensor based on a multi-pass cell with dense spot pattern and a novel quartz tuning fork with low frequency

A highly sensitive light-induced thermoelectric spectroscopy(LITES)sensor based on a multi-pass cell(MPC)with dense spot pattern and a novel quartz tuning fork(QTF)with low resonance frequency is reported in this manuscript.An erbi-um-doped fiber amplifier(EDFA)was employed to amplify the output optical power so that the signal level was further enhanced.The optical path length(OPL)and the ratio of optical path length to volume(RLV)of the MPC is 37.7 m and 13.8 cm^(-2),respectively.A commercial QTF and a self-designed trapezoidal-tip QTF with low frequency of 9461.83 Hz were used as the detectors of the sensor,respectively.The target gas selected to test the performance of the system was acetylene(C2H2).When the optical power was constant at 1000 mW,the minimum detection limit(MDL)of the C2H2-LITES sensor can be achieved 48.3 ppb when using the commercial QTF and 24.6 ppb when using the trapezoid-al-tip QTF.An improvement of the detection performance by a factor of 1.96 was achieved after replacing the commer-cial QTF with the trapezoidal-tip QTF.

Optogenetic activation of intracellular signaling based on light-inducible protein-protein homo-interactions

Dynamic protein-protein interactions are essential for proper cell functioning.Homointeraction events—physical interactions between the same type of proteins—represent a pivotal subset of protein-protein interactions that are widely exploited in activating intracellular signaling pathways.Capacities of modulating protein-protein interactions with spatial and temporal resolution are greatly desired to decipher the dynamic nature of signal transduction mechanisms.The emerging optogenetic technology,based on genetically encoded light-sensitive proteins,provides promising opportunities to dissect the highly complex signaling networks with unmatched specificity and spatiotemporal precision.Here we review recent achievements in the development of optogenetic tools enabling light-inducible protein-protein homo-interactions and their applications in optical activation of signaling pathways.

Light Inducing the Geometric Conversion of NiO_(6) to Trigger a Faster Oxygen Evolution Reaction Pathway:The Coupled Oxygen Evolution Mechanism

Developing highly active and robust oxygen evolution reaction(OER)electrocatalysts is still a critical challenge for water electrolyzers and metal-air batteries.Realizing the dynamic evolution of the intermediate and charge transfer during OER and developing a clear OER mechanism is crucial to design high-performance OER catalysts.Recently in Nature,Xue and colleagues revealed a new OER mechanism,coupled oxygen evolution mechanism(COM),which involves a switchable metal and oxygen redox under light irradiation in nickel oxyhydroxide-based materials.This newly developed mechanism requires a reversible geometric conversion between octahedron(NiO_(6))and square planar(NiO_(4))to achieve electronic states with both“metal redox”and“oxygen redox”during OER.The asymmetric structure endows NR-NiOOH with a nonoverlapping region between the dz^(2) orbitals and a_(1g)^(*)bands,which facilitate the geometric conversion and enact the COM pathway.As a result,NR-NiOOH exhibited better OER activity and stability than the traditional NiOOH.

THE LIGHT INDUCED CHANGE IN TRANSIENT PHOTOCONDUC-TIVITY OF POLYMORPHOUS SILICON FILMS

The decays of transient photoconductivity and their light-induced changes of polymorphous silicon (pm-Si:H) films were investigated. The decays can be fit fairly well by a sum of two exponential decay functions, which indicates that there are two kinds of traps contributing to the process. The light-induced changes of the concentration and energy level of the traps were estimated. The results show that the light-induced changes in trap energy position Et, trap concentration Nt as well as photoconductivity are markedly less for pm-Si:H than that for a-Si:H.