A Loss-model-based Efficiency Optimization Control Method for Induction Traction System of High-speed Train under Emergency Self-propelled Mode

Increasing attention has been paid to the efficiency improvement of the induction traction system of high-speed trains due to the high demand for energy saving. In emergency self-propelled mode, however, the dc-link voltage and the traction power of the motor are significantly reduced, resulting in decreased traction efficiency due to the low load and low speed operations. Aiming to tackle this problem, a novel efficiency improved control method is introduced to the emergency mode of high-speed train traction system in this paper. In the proposed method, a total loss model of induction motor considering the behaviors of both iron and copper loss is established. An improved iterative algorithm with decreased computational burden is then introduced, resulting in a fast solving of the optimal flux reference for loss minimization at each control period. In addition, considering the parameter variation problem due to the low load and low speed operations, a parameter estimation method is integrated to improve the controller's robustness. The effectiveness of the proposed method on efficiency improvement at low voltage and low load conditions is demonstrated by simulated and experimental results.

eQUEST Based Building Energy Modeling Analysis for Energy Efficiency of Buildings

Building energy performance is a function of numerous building parameters.In this study,sensitivity analysis on twenty parameters is performed to determine the top three parameters that have the most significant impact on the energy performance of buildings.Actual data from two fully operational commercial buildings were collected and used to develop a building energy model in the Quick Energy Simulation Tool(eQUEST).The model is calibrated using the Normalized Mean Bias Error(NMBE)and Coefficient of Variation of Root Mean Square Error(CV(RMSE))method.The model satisfies the NMBE and CV(RMSE)criteria set by the American Society of Heating,Refrigeration,and Air-Conditioning(ASHRAE)Guideline 14,Federal Energy Management Program(FEMP),and International Performance Measurement and Verification Protocol(IPMVP)for building energy model calibration.The values of the parameters are varied in two levels,and then the percentage change in output is calculated.Fractional factorial analysis on eight parameters with the highest percentage change in energy performance is performed at two levels in a statistical software JMP.For building A,the top 3 parameters from the percentage change method are:Heating setpoint,cooling setpoint and server room.From fractional factorial design,the top 3 parameters are:heating setpoint(p-value=0.00129),cooling setpoint(p-value=0.00133),and setback control(p-value=0.00317).For building B,the top 3 parameters from both methods are:Server room(pvalue=0.0000),heating setpoint(p-value=0.00014),and cooling setpoint(p-value=0.00035).If the best values for all top three parameters are taken simultaneously,energy efficiency improves by 29%for building A and 35%for building B.

Reinforcement Learning Model for Energy System Management to Ensure Energy Efficiency and Comfort in Buildings

This article focuses on the challenges ofmodeling energy supply systems for buildings,encompassing both methods and tools for simulating thermal regimes and engineering systems within buildings.Enhancing the comfort of living or working in buildings often necessitates increased consumption of energy and material,such as for thermal upgrades,which consequently incurs additional economic costs.It is crucial to acknowledge that such improvements do not always lead to a decrease in total pollutant emissions,considering emissions across all stages of production and usage of energy and materials aimed at boosting energy efficiency and comfort in buildings.In addition,it explores the methods and mechanisms for modeling the operating modes of electric boilers used to collectively improve energy efficiency and indoor climatic conditions.Using the developed mathematical models,the study examines the dynamic states of building energy supply systems and provides recommendations for improving their efficiency.These dynamic models are executed in software environments such as MATLAB/Simscape and Python,where the component detailing schemes for various types of controllers are demonstrated.Additionally,controllers based on reinforcement learning(RL)displayed more adaptive load level management.These RL-based controllers can lower instantaneous power usage by up to 35%,reduce absolute deviations from a comfortable temperature nearly by half,and cut down energy consumption by approximately 1%while maintaining comfort.When the energy source produces a constant energy amount,the RL-based heat controllermore effectively maintains the temperature within the set range,preventing overheating.In conclusion,the introduced energydynamic building model and its software implementation offer a versatile tool for researchers,enabling the simulation of various energy supply systems to achieve optimal energy efficiency and indoor climate control in buildings.

How Does Urban Shrinkage Affect Land Use Efficiency?A Case Study of Shrinking Cities in Northeast China

The effect of urban shrinkage has gradually become a new topic.Theoretically,urban shrinkage may exert great influence on land use efficiency(LUE)through various urban subsystems,but there is currently limited research examining these pathways.Using the Super-SBM-Undesirable model and the Structural Equation Model(SEM),this study calculates the LUE of shrinking cities in Northeast China and simulates the process of urban shrinkage affecting LUE.To quantify the process of urban shrinkage affecting LUE,three mediation variables,namely the economy,public services,and innovation,are used as latent variables to apply SEM.The results show that urban shrinkage will affect LUE through a direct path and indirect paths.In the direct path,urban shrinkage leads to an improvement in LUE.In the indirect paths,the economy and innovation will transmit the negative effect of urban shrinkage on LUE,while public services will reverse this effect.An important contribution of this study is that it quantifies the paths of urban shrinkage affecting LUE,thereby expanding the understanding of urban shrinkage effect and laying a foundation for the sustainable development of shrinking cities.

Are cities greener because of innovation?Independent innovation policy and green economic efficiency

The national independent innovation demonstration zone(NIIDZ)is an independent innovation policy that plays a crucial role in implementing strategies.Given the importance of the NIIDZ,this study uses panel data of 278 prefecture-level cities in China from 2006 to 2020 and empirically examines the effect and internal mechanism of the NIIDZ on green economic efficiency(GEE)using the difference-in-difference model(DID).The results show that the NIIDZ effectively enhances the growth of GEE,and the results remain valid through several robustness tests,such as year-by-year propensity score matching.The transmission mechanism suggests that the NIIDZ indirectly drives GEE by accelerating scientific and technological investment,promoting talent concentration,and optimizing the industrial structure.Moreover,heterogeneity analysis reveals that the promotion effect of the NIIDZ on GEE is more prominent in the eastern region and high green development level areas.The study’s findings can serve as a reference for China to further utilize the policy effectiveness of the NIIDZ and accelerate the high-quality development of the green economy in the future.

The heterogeneous impact of China-Europe railway express on the efficiency of logistics industry in node cities

Purpose-The spatiotemporal compression effect of China-Europe Railway Express(CR-Express)can reduce the filow costs of resources between China's node cities.Additionally,it can break through the limitations of low-added-value marine products,significantly impacting the logistics industry efficiency.However,there are few literature verifying and analyzing its heterogeneity.This study explores the impact of CR-Express on the efficiency of logistics industry in node cities and analyzes the heterogeneity.Design/methodology/approach-First,this study uses panel data to measure the efficiency of node city logistics industry.Secondiy,this study discusses the impact of the opening of CR-Express on the efficiency of logistics industry in node cities based on the multi-period differential model.Finally,according to the node city difference,the sample city experimental group is grouped for heterogeneity analysis.Findings-The results show that CR-Express can promote the urban logistics industry efficiency,with an average effect of 4.55%.According to the urban characteristics classification,the heterogeneity analysis shows that the efficiency improvement effect of logistics industry in inland cities is more obvious.The improvement effect of node cities and central cities in central and western China is stronger,especially in the sample of megacities and type I big cities.Compared with non-value chain industrial products,the CR-Express has significant promotion effects on the logistics efficiency of the cities where main goods are value chain products.Originality/value-Under the background of double cycle development,this paper can provide a scientific basis for the investment benefit evaluation of CR-Express construction and the follow-up route planning.

A Study of the Impact of the Digital Economy on the Efficiency of Urban Green Economy--Based on the Yangtze River Delta City Cluster

This paper adopts the non-expected output-super-efficiency SBM(Slacks-Based Model)model and principal component analysis to calculate the green economy efficiency and the digital economy level of 27 prefecture-level cities in China’s Yangtze River Delta urban agglomeration between 2011 and 2019,respectively,and examines the impact of the digital economy on the green economy efficiency by using benchmark regression and mechanism analysis.The findings show that,first,the digital economy has a significant contribution to the green economic efficiency of cities,and this conclusion still holds after robustness tests such as replacing explanatory and interpreted variables and introducing province-fixed effects.Second,through the mechanism test,it is found that the digital economy can indirectly promote urban green economic efficiency through the positive mechanism effect of promoting industrial structure upgrading.

Evaluation of Energy Efficiency and Analysis of Influencing Factors of Company CW’s Manufacturing Workshops

In this work,the Slacks-Based Measure(SBM)model within Data Envelopment Analysis was employed to establish a set of indicators for evaluating the energy efficiency of manufacturing workshops.The energy efficiency of 12 Company CW’s manufacturing workshops from 2016 to 2022 was assessed.The findings indicated that aside from a few workshops operating at the production frontier,the rest exhibit significant fluctuations in energy efficiency and generally low energy efficiency.Subsequently,a combined GRA-Tobit analysis model was introduced to identify factors influencing the energy efficiency of Company CW’s manufacturing workshops.Regression analysis revealed that technological investments,employee quality,workshop production scale,investment in clean energy,and the level of pollution control all significantly impact the energy efficiency of Company CW’s manufacturing workshops.By evaluating the energy efficiency of Company CW’s manufacturing workshops and studying their influencing factors,this research aids company managers in understanding the energy efficiency of the manufacturing process.It optimizes the combination of various production elements,thereby offering effective guidance for improving the energy efficiency issues of the company’s manufacturing workshops,which can contribute to enhancing the corporation’s overall energy efficiency.

Evaluation of Green Development Efficiency in Chongqing Municipality Based on Super-SBM and Malmquist Models

The green development of Chongqing municipality is crucial in establishing a major ecological shield in the upper reaches of the Yangtze River.By developing a Super-SBM model and using the Malmquist index to analyze and calculate the green development efficiency and its influencing factors in Chongqing from 2011 to 2021,this study reveals an accelerating trend in the overall green development efficiency in Chongqing.The significant enhancement of green development efficiency in Chongqing is primarily attributed to changes in returns to scale.Pure technical efficiency and technological advancements have a considerable potential impact on improving green development efficiency in Chongqing.Furthermore,there are discernible disparities in green development efficiency among districts and counties in Chongqing,with different factors influencing these variations.Chongqing is suggested to promote clean and efficient energy utilization,bolster the application and commercialization of scientific and technological advancements,consistently advance ecological restoration and management,and elevate the quality of green development to a higher level.

Evaluation and Influencing Factors of Urban Renewal Efficiency Based on SBM Model:A Case Study of the First Batch of Pilot Cities for Urban Renewal

China is already in the second half of the urbanization process,which means that the urbanization path in China needs to shift from“large-scale expansion development”in the past to“comprehensive and refined operation”.To explore how to efficiently carry out urban renewal work,from the perspective of urban renewal efficiency,the first batch of pilot cities for urban renewal released by the Ministry of Housing and Urban Development in 2021 are selected as the objects.And the SBM model and Malmquist index are used to calculate and analyze their urban renewal efficiency.The results indicate that among the 20 pilot cities,Beijing,Tangshan,Suzhou,Tongling,and Jingdezhen are of high grade,and Hohhot,Xiamen,Huangshi,and Yinchuan are of medium grade,while the rest of the cities are of low grade.The regression results of the Tobit model indicate that population density,real estate investment,and regional economic development level are the main influencing factors of urban renewal.Finally,constructive suggestions are proposed for urban renewal from four aspects:concept,technology,real estate,and policy.

Probing the influence of secondary fracture connectivity on fracturing fluid flowback efficiency

A deep understanding of the geometric impacts of fracture on fracturing fluid flowback efficiency is essential for unconventional oil development. Using nuclear magnetic resonance and 2.5-dimensional matrix-fracture visualization microfluidic models, qualitative and quantitative descriptions of the influences of connectivity between primary fracture and secondary fracture on flowback were given from core scale to pore network scale. The flow patterns of oil-gel breaking fluid two-phase flow during flowback under different fracture connectivity were analyzed. We found some counterintuitive results that non-connected secondary fracture (NCSF, not connect with artificial primary fracture and embedded in the matrix) is detrimental to flowbackefficiency. The NCSF accelerates the formation of oil channeling during flowback, resulting in a large amount of fracturing fluid trapped in the matrix, which is not beneficial for flowback. Whereas the connected secondary fracture (CSF, connected with the artificial primary fracture) is conducive to flowback. The walls of CSF become part of primary fracture, which expands the drainage area with low resistance, and delays the formation of the oil flow channel. Thus, CSF increases the high-speed flowback stage duration, thereby enhancing the flowback efficiency. The fracturing fluid flowback efficiency investigated here follows the sequence of the connected secondary fracture model (72%) > the matrix model (66%) > the non-connected secondary fracture model (38%). Our results contribute to hydraulic fracturing design and the prediction of flowback efficiency.

Propagation and sealing efficiency of chemical grouting in a two-dimensional fracture network with flowing water

In this study, an orthogonal array experiment is conducted by using a transparent fracture network replica. Image processing and theoretical analysis are performed to investigate the model sealing efficiency(SE), factors influencing SE, and the effect of flowing water on propagation. The results show that grout propagation can be classified into three patterns in the fracture network: sealing off, partial sealing,and major erosion. The factors controlling the SE in a descending order of the amount of influence are the initial water flow speed, fracture aperture, grout take, and gel time. An optimal value for the combination of the gel time and grout take(artificial factors) can result in a good SE. The grouting and seepage pressures are measured, and the results reveal that their variations can indicate the SE to some extent. The SE is good when the seepage pressure at each point increases overall;the frequent fluctuations in the seepage pressure indicate a moderately poor SE, and an overall decline in the seepage pressure indicates a major erosion type. The deflection effect of grouting shows an approximately elliptical propagation with the long axis expanding along the wider fracture opening, demonstrating further application in grouting design.

Modeling screening efficiency with vibrational parameters based on DEM 3D simulation

The efficiency of particle screening was studied over a range of vibrational parameters including amplitude, frequency and vibrational direction. The Discrete Element Method (DEM) was used to simulate the screening process. A functional relationship between efficiency and the parameters, both singly and combined, is established. The function is a complicated exponential. Optimal amplitude and frequency values are smaller for particles near the mesh and larger for other particles. The optimum vibration angle is 45° for nearly all kinds of particles. A transverse velocity, V⊥, was defined and V⊥=0.2 m/s was identified to be the most efficient operating point by both simulation and experimental observation. Comparison of these results with those reported by others is included.

MATHEMATICAL MODEL FOR CONTINUOUS DETECTION OF CURRENT EFFICIENCY IN ALUMINUM PRODUCTION

ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｍａｔｈｅｍａｔｉｃａｌｍｏｄｅｌｓｆｏｒｃａｌｃｕｌａｔｉｏｎｏｆｃｕｒｅｎｔｅｆｉｃｉｅｎｃｙｉｎａｌｕｍｉｎａｒｅｄｕｃｔｉｏｎｈａｖｅｂｅｎｒｅｐｏｒｔｅｄｂｙｍａｎｙｉｎｖｅｓｔｉｇａｔｏｒｓ，ｍｏｓｔｏｆｗｈ...

3D CFD validation of invert trap efficiency for sewer solid management using VOF model

Earlier investigators have numerically carried out performance analysis of the invert trap fitted in an open channel using the stochastic discrete phase model(DPM) by assuming the open channel flow to be closed conduit flow under pressure and assuming zero shear stress at the top wall.This is known as the fixed lid model.By assuming the top wall to be a shear free wall,they have been able to show that the velocity distribution looks similar to that of an open channel flow with zero velocity at the bottom and maximum velocity at the top,representing the free water surface,but no information has been provided for the pressure at the free water surface.Because of this assumption,the validation of the model in predicting the trap efficiency has performed significantly poorly.In addition,the free water surface subject to zero gauge pressure cannot be modeled using the fixed lid model because there is no provision of extra space in the form of air space for the fluctuating part of the water surface profile.It can.however,be modeled using the volume of fluid(VOF) model because the VOF model is the appropriate model for open channel or free surface flow.Therefore,in the present study,three-dimensional(3D) computational fluid dynamics(CFD) modeling with the VOF model,which considers open channel flow with a free water surface,along with the stochastic DPM.was used to model the trap efficiency of an invert trap fitted in an open rectangular channel.The governing mathematical flow equations of the VOF model were solved using the ANSYS Fluent 14.0 software,reproducing the experimental conditions exactly.The results show that the 3D CFD predictions using the VOF model closely fit the experimental data for glass bead particles.

Production Efficiency of Two-Oriented Agriculture Based on Three-Stage DEA Model

Two-oriented agriculture was a complex organism coupling production,economics,society and ecology.Its development process was affected by various factors such as producers,nature,society,etc.In order to overcome measurement error of traditional data envelopment analysis caused by ignoring random,three-stage DEA model was studied to remove environmental factors and random effects.On the foundation of this model was two-oriented agriculture comprehensive production efficiency of 14 cities were estimated in Hunan Province in 2008,and brown forth corresponding policy proposals to promote agricultural development.

Prediction of efficient outputs based on GM(1,N) model and weak DEA efficiency

This paper expresses the efficient outputs of decisionmaking unit（DMU） as the sum of ＂average outputs＂ forecasted by a GM（1,N） model and ＂increased outputs＂ which reflect the difficulty to realize efficient outputs.The increased outputs are solved by linear programming using data envelopment analysis efficiency theories,wherein a new sample is introduced whose inputs are equal to the budget in the issue No.n ＋ 1 and outputs are forecasted by the GM（1,N） model.The shortcoming in the existing methods that the forecasted efficient outputs may be less than the possible actual outputs according to developing trends of input-output rate in the periods of pre-n is overcome.The new prediction method provides decision-makers with more decisionmaking information,and the initial conditions are easy to be given.

Shaking Table Model Test of Isolated Structure on Soft Site and Analysis on Its Isolation Efficiency

Adopting a soft site model built on soft interlayer soil foundation,a shaking table test for soft interlayer soil-isolated structure interaction is conducted to investigate the seismic response of isolated structure on soft site,and analyze its isolation effect.Test results show that the test can reflect the earthquake response characteristics of isolated structure on soft site.It is on soft site that the dynamic characteristics of isolated structure,acceleration magnification factor(AMF)of isolated structure and isolation efficiency of the isolation layer differ from those on rigid foundation with an soil-structure interaction(SSI)effect,represented by the reduction in fundamental vibration frequency of isolated structure and the increase of damping ratio with changes of the SSI effect.SSI can either increase or decrease AMF of isolated structure on soft site,depending on the characteristics of earthquake motion input.Furthermore,the isolation efficiency of isolation layer on soft site is decreased with the SSI effect,which is related to the peak ground acceleration(PGA)and the characteristics of earthquake motion input.

Operation Efficiency Optimisation Modelling and Application of Model Predictive Control

The efficiency of any energy system can be charaterised by the relevant efficiency components in terms of performance, operation, equipment and technology(POET). The overall energy efficiency of the system can be optimised by studying the POET energy efficiency components. For an existing energy system, the improvement of operation efficiency will usually be a quick win for energy efficiency. Therefore, operation efficiency improvement will be the main purpose of this paper. General procedures to establish operation efficiency optimisation models are presented. Model predictive control, a popular technique in modern control theory, is applied to solve the obtained energy models. From the case studies in water pumping systems, model predictive control will have a prosperous application in more energy efficiency problems.

Regional Economic Efficiency and Its Influencing Factors of Beijing-Tianjin-Hebei Metropolitans in China Based on a Heterogeneity Stochastic Frontier Model

Using a heterogeneity stochastic frontier model(HSFM),we empirically investigated the economic efficiency of Beijing-Tianjin-Hebei from 2003 to 2016 and its influencing factors.The key findings of the paper lie in:1)in Beijing-Tianjin-Hebei,the overall economic and technological efficiency tended to increase in a wavelike manner,economic growth slowed down,and there was an obvious imbalance in economic efficiency between the different districts,counties and cities;2)the heterogeneity stochastic frontier production functions(SFPFs)of Beijing,Tianjin and Hebei were different from each other,and investment was still an important impetus of economic growth in Beijing-Tianjin-Hebei;3)economic efficiency was positively correlated with economic agglomeration,human capital,industrial structure,infrastructure,the informatization level,and institutional factors,but negatively correlated with the government role and economic opening.The following policy suggestions are offered:1)to improve regional economic efficiency and reduce the economic gap in Beijing-Tianjin-Hebei,governments must reduce their intervention in economic activities,stimulate the potentials of labor and capital,optimize the structure of human resources,and foster new demographic incentives;2)governments must guide economic factors that are reasonable throughout Beijing-Tianjin-Hebei and strengthen infrastructure construction in underdeveloped regions,thus attaining sustainable economic development;3)governments must plan overall economic growth factors of Beijing-Tianjin-Hebei and promote reasonable economic factors(e.g.,labor,resources,and innovations)across different regions,thus attaining complementary advantages between Beijing,Tianjin,and Hebei.